summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2025-07-06misc: tps6594-pfsm: Add NULL pointer check in tps6594_pfsm_probe()Chenyuan Yang
[ Upstream commit a99b598d836c9c6411110c70a2da134c78d96e67 ] The returned value, pfsm->miscdev.name, from devm_kasprintf() could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool. Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Link: https://lore.kernel.org/r/20250311010511.1028269-1-chenyuan0y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notifyWupeng Ma
commit 1bd6406fb5f36c2bb1e96e27d4c3e9f4d09edde4 upstream. During our test, it is found that a warning can be trigger in try_grab_folio as follow: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1678 at mm/gup.c:147 try_grab_folio+0x106/0x130 Modules linked in: CPU: 0 UID: 0 PID: 1678 Comm: syz.3.31 Not tainted 6.15.0-rc5 #163 PREEMPT(undef) RIP: 0010:try_grab_folio+0x106/0x130 Call Trace: <TASK> follow_huge_pmd+0x240/0x8e0 follow_pmd_mask.constprop.0.isra.0+0x40b/0x5c0 follow_pud_mask.constprop.0.isra.0+0x14a/0x170 follow_page_mask+0x1c2/0x1f0 __get_user_pages+0x176/0x950 __gup_longterm_locked+0x15b/0x1060 ? gup_fast+0x120/0x1f0 gup_fast_fallback+0x17e/0x230 get_user_pages_fast+0x5f/0x80 vmci_host_unlocked_ioctl+0x21c/0xf80 RIP: 0033:0x54d2cd ---[ end trace 0000000000000000 ]--- Digging into the source, context->notify_page may init by get_user_pages_fast and can be seen in vmci_ctx_unset_notify which will try to put_page. However get_user_pages_fast is not finished here and lead to following try_grab_folio warning. The race condition is shown as follow: cpu0 cpu1 vmci_host_do_set_notify vmci_host_setup_notify get_user_pages_fast(uva, 1, FOLL_WRITE, &context->notify_page); lockless_pages_from_mm gup_pgd_range gup_huge_pmd // update &context->notify_page vmci_host_do_set_notify vmci_ctx_unset_notify notify_page = context->notify_page; if (notify_page) put_page(notify_page); // page is freed __gup_longterm_locked __get_user_pages follow_trans_huge_pmd try_grab_folio // warn here To slove this, use local variable page to make notify_page can be seen after finish get_user_pages_fast. Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs") Cc: stable <stable@kernel.org> Closes: https://lore.kernel.org/all/e91da589-ad57-3969-d979-879bbd10dddd@huawei.com/ Signed-off-by: Wupeng Ma <mawupeng1@huawei.com> Link: https://lore.kernel.org/r/20250510033040.901582-1-mawupeng1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19mei: vsc: Cast tx_buf to (__be32 *) when passed to cpu_to_be32_array()Hans de Goede
[ Upstream commit 97ce0fe2b7240d47d9124daa92217e478c21a3ba ] Commit f88c0c72ffb0 ("mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type") changed the type of tx_buf from "void *" to "struct vsc_tp_packet *" and added a cast to (u32 *) when passing it to cpu_to_be32_array() and the same change was made for rx_buf. This triggers the type-check warning in sparse: vsc-tp.c:327:28: sparse: expected restricted __be32 [usertype] *dst vsc-tp.c:327:28: sparse: got unsigned int [usertype] * vsc-tp.c:343:42: sparse: expected restricted __be32 const [usertype] *src vsc-tp.c:343:42: sparse: got unsigned int [usertype] * Fix this by casting to (__be32 *) instead. Note actually changing the type of the buffers to "be32 *" is not an option this buffer does actually contain a "struct vsc_tp_packet" and is used as such most of the time. vsc_tp_rom_xfer() re-uses the buffers as just dumb arrays of 32 bit words to talk to the device before the firmware has booted, to avoid needing to allocate a separate buffer. Fixes: f88c0c72ffb0 ("mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505071634.kZ0I7Va6-lkp@intel.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20250507090728.115910-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29eeprom: ee1004: Check chip before probingEddie James
[ Upstream commit d9406677428e9234ea62bb2d2f5e996d1b777760 ] Like other eeprom drivers, check if the device is really there and functional before probing. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20250218220959.721698-1-eajames@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29misc: pci_endpoint_test: Give disabled BARs a distinct error codeNiklas Cassel
[ Upstream commit 7e80bbef1d697dbce7a39cfad0df770880fe3f29 ] The current code returns -ENOMEM if test->bar[barno] is NULL. There can be two reasons why test->bar[barno] is NULL: 1) The pci_ioremap_bar() call in pci_endpoint_test_probe() failed. 2) The BAR was skipped, because it is disabled by the endpoint. Many PCI endpoint controller drivers will disable all BARs in their init function. A disabled BAR will have a size of 0. A PCI endpoint function driver will be able to enable any BAR that is not marked as BAR_RESERVED (which means that the BAR should not be touched by the EPF driver). Thus, perform check if the size is 0, before checking if test->bar[barno] is NULL, such that we can return different errors. This will allow the selftests to return SKIP instead of FAIL for disabled BARs. Signed-off-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20250123120147.3603409-3-cassel@kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf typeHans de Goede
[ Upstream commit f88c0c72ffb014e5eba676ee337c4eb3b1d6a119 ] vsc_tp.tx_buf and vsc_tp.rx_buf point to a struct vsc_tp_packet, use the correct type instead of "void *" and use sizeof(*ptr) when allocating memory for these buffers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20250318141203.94342-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02objtool, lkdtm: Obfuscate the do_nothing() pointerJosh Poimboeuf
[ Upstream commit 05026ea01e95ffdeb0e5ac8fb7fb1b551e3a8726 ] If execute_location()'s memcpy of do_nothing() gets inlined and unrolled by the compiler, it copies one word at a time: mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x1374 mov %rax,0x38(%rbx) mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x136c mov %rax,0x30(%rbx) ... Those .text references point to the middle of the function, causing objtool to complain about their lack of ENDBR. Prevent that by resolving the function pointer at runtime rather than build time. This fixes the following warning: drivers/misc/lkdtm/lkdtm.o: warning: objtool: execute_location+0x23: relocation to !ENDBR: .text+0x1378 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/30b9abffbddeb43c4f6320b1270fa9b4d74c54ed.1742852847.git.jpoimboe@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/202503191453.uFfxQy5R-lkp@intel.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02misc: microchip: pci1xxxx: Fix incorrect IRQ status handling during ackRengarajan S
commit e9d7748a7468581859d2b85b378135f9688a0aff upstream. Under irq_ack, pci1xxxx_assign_bit reads the current interrupt status, modifies and writes the entire value back. Since, the IRQ status bit gets cleared on writing back, the better approach is to directly write the bitmask to the register in order to preserve the value. Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20250313170856.20868-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registrationRengarajan S
commit 18eb77c75ed01439f96ae5c0f33461eb5134b907 upstream. Resolve kernel panic while accessing IRQ handler associated with the generated IRQ. This is done by acquiring the spinlock and storing the current interrupt state before handling the interrupt request using generic_handle_irq. A previous fix patch was submitted where 'generic_handle_irq' was replaced with 'handle_nested_irq'. However, this change also causes the kernel panic where after determining which GPIO triggered the interrupt and attempting to call handle_nested_irq with the mapped IRQ number, leads to a failure in locating the registered handler. Fixes: 194f9f94a516 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02mei: vsc: Fix fortify-panic caused by invalid counted_by() useHans de Goede
commit 00f1cc14da0f06d2897b8c528df7c7dcf1b8da50 upstream. gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[] and the vsc-tp.c code is using this in a wrong way. len does not contain the available size in the buffer, it contains the actual packet length *without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to buf[] the fortify-panic handler gets triggered: [ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0 [ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50 ... [ 80.843175] __fortify_panic+0x9/0xb [ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw] [ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110 [ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc] [ 80.843270] mei_reset+0x11d/0x420 [mei] The easiest fix would be to just drop the counted-by but with the exception of the ack buffer in vsc_tp_xfer_helper() which only contains enough room for the packet-header, all other uses of vsc_tp_packet always use a buffer of VSC_TP_MAX_XFER_SIZE bytes for the packet. Instead of just dropping the counted-by, split the vsc_tp_packet struct definition into a header and a full-packet definition and use a fixed size buf[] in the packet definition, this way fortify-source buffer overrun checking still works when enabled. Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20250318141203.94342-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02mei: me: add panther lake H DIDAlexander Usyskin
commit 86ce5c0a1dec02e21b4c864b2bc0cc5880a2c13c upstream. Add Panther Lake H device id. Cc: stable <stable@kernel.org> Co-developed-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250408130005.1358140-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25misc: pci_endpoint_test: Fix 'irq_type' to convey the correct typeKunihiko Hayashi
commit baaef0a274cfb75f9b50eab3ef93205e604f662c upstream. There are two variables that indicate the interrupt type to be used in the next test execution, "irq_type" as global and "test->irq_type". The global is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). The type set in this function isn't reflected in the global "irq_type", so ioctl(PCITEST_GET_IRQTYPE) returns the previous type. As a result, the wrong type is displayed in old version of "pcitest" as follows: - Result of running "pcitest -i 0" SET IRQ TYPE TO LEGACY: OKAY - Result of running "pcitest -I" GET IRQ TYPE: MSI Whereas running the new version of "pcitest" in kselftest results in an error as follows: # RUN pci_ep_basic.LEGACY_IRQ_TEST ... # pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Expected 0 (0) == ret (1) # pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Can't get Legacy IRQ type Fix this issue by propagating the current type to the global "irq_type". Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250225110252.28866-5-hayashi.kunihiko@socionext.com Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25misc: pci_endpoint_test: Avoid issue of interrupts remaining after ↵Kunihiko Hayashi
request_irq error commit f6cb7828c8e17520d4f5afb416515d3fae1af9a9 upstream. After devm_request_irq() fails with error in pci_endpoint_test_request_irq(), the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs have been released. However, some requested IRQs remain unreleased, so there are still /proc/irq/* entries remaining, and this results in WARN() with the following message: remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0' WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c To solve this issue, set the number of remaining IRQs to test->num_irqs, and release IRQs in advance by calling pci_endpoint_test_release_irq(). Cc: stable@vger.kernel.org Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20250225110252.28866-3-hayashi.kunihiko@socionext.com [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-20misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' errorKunihiko Hayashi
commit 919d14603dab6a9cf03ebbeb2cfa556df48737c8 upstream. There are two variables that indicate the interrupt type to be used in the next test execution, global "irq_type" and "test->irq_type". The former is referenced from pci_endpoint_test_get_irq() to preserve the current type for ioctl(PCITEST_GET_IRQTYPE). In the pci_endpoint_test_request_irq(), since this global variable is referenced when an error occurs, the unintended error message is displayed. For example, after running "pcitest -i 2", the following message shows "MSI 3" even if the current IRQ type becomes "MSI-X": pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3 SET IRQ TYPE TO MSI-X: NOT OKAY Fix this issue by using "test->irq_type" instead of global "irq_type". Cc: stable@vger.kernel.org Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20250225110252.28866-4-hayashi.kunihiko@socionext.com [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-20PCI: Add Rockchip Vendor IDShawn Lin
[ Upstream commit 20bbb083bbc9d3f8db390f2e35e168f1b23dae8a ] Move PCI_VENDOR_ID_ROCKCHIP from pci_endpoint_test.c to pci_ids.h and reuse it in pcie-rockchip-host.c. Link: https://lore.kernel.org/r/20250218092120.2322784-2-cassel@kernel.org Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-03-13eeprom: digsy_mtc: Make GPIO lookup table match the deviceAndy Shevchenko
commit 038ef0754aae76f79b147b8867f9250e6a976872 upstream. The dev_id value in the GPIO lookup table must match to the device instance name, which in this case is combined of name and platform device ID, i.e. "spi_gpio.1". But the table assumed that there was no platform device ID defined, which is wrong. Fix the dev_id value accordingly. Fixes: 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO descriptors") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIOHans de Goede
commit fdb1ada57cf8b8752cdf54f08709d76d74999544 upstream. The _CRS ACPI resources table has 2 entries for the host wakeup GPIO, the first one being a regular GpioIo () resource while the second one is a GpioInt () resource for the same pin. The acpi_gpio_mapping table used by vsc-tp.c maps the first Gpio () resource to "wakeuphost-gpios" where as the second GpioInt () entry is mapped to "wakeuphostint-gpios". Using "wakeuphost" to request the GPIO as was done until now, means that the gpiolib-acpi code does not know that the GPIO is active-low as that info is only available in the GpioInt () entry. Things were still working before due to the following happening: 1. Since the 2 entries point to the same pin they share a struct gpio_desc 2. The SPI core creates the SPI device vsc-tp.c binds to and calls acpi_dev_gpio_irq_get(). This does use the second entry and sets FLAG_ACTIVE_LOW in gpio_desc.flags . 3. vsc_tp_probe() requests the "wakeuphost" GPIO and inherits the active-low flag set by acpi_dev_gpio_irq_get() But there is a possible scenario where things do not work: 1. - 3. happen as above 4. After requesting the "wakeuphost" GPIO, the "resetfw" GPIO is requested next, but its USB GPIO controller is not available yet, so this call returns -EPROBE_DEFER. 5. The gpio_desc for "wakeuphost" is put() and during this the active-low flag is cleared from gpio_desc.flags . 6. Later on vsc_tp_probe() requests the "wakeuphost" GPIO again, but now it is not marked active-low. The difference can also be seen in /sys/kernel/debug/gpio, which contains the following line for this GPIO: gpio-535 ( |wakeuphost ) in hi IRQ ACTIVE LOW If the second scenario is hit the "ACTIVE LOW" at the end disappears and things do not work. Fix this by requesting the GPIO through the "wakeuphostint" mapping instead which provides active-low info without relying on acpi_dev_gpio_irq_get() pre-populating this info in the gpio_desc. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2316918 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250214212425.84021-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mei: me: add panther lake P DIDAlexander Usyskin
commit a8e8ffcc3afce2ee5fb70162aeaef3f03573ee1e upstream. Add Panther Lake P device id. Cc: stable <stable@kernel.org> Co-developed-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Tomas Winkler <tomasw@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250209110550.1582982-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"Christian Heusel
commit 2397d61ee45cddb8f3bd3a3a9840ef0f0b5aa843 upstream. This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772. This commit was found responsible for issues with SD card recognition, as users had to re-insert their cards in the readers and wait for a while. As for some people the SD card was involved in the boot process it also caused boot failures. Cc: stable@vger.kernel.org Link: https://bbs.archlinux.org/viewtopic.php?id=303321 Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection") Reported-by: qf <quintafeira@tutanota.com> Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu Signed-off-by: Christian Heusel <christian@heusel.eu> Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17misc: fastrpc: Fix copy buffer page sizeEkansh Gupta
commit e966eae72762ecfdbdb82627e2cda48845b9dd66 upstream. For non-registered buffer, fastrpc driver copies the buffer and pass it to the remote subsystem. There is a problem with current implementation of page size calculation which is not considering the offset in the calculation. This might lead to passing of improper and out-of-bounds page size which could result in memory issue. Calculate page start and page end using the offset adjusted address instead of absolute address. Fixes: 02b45b47fbe8 ("misc: fastrpc: fix remote page size calculation") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17misc: fastrpc: Fix registered buffer page addressEkansh Gupta
commit 6ca4ea1f88a06a04ed7b2c9c6bf9f00833b68214 upstream. For registered buffers, fastrpc driver sends the buffer information to remote subsystem. There is a problem with current implementation where the page address is being sent with an offset leading to improper buffer address on DSP. This is leads to functional failures as DSP expects base address in page information and extracts offset information from remote arguments. Mask the offset and pass the base page address to DSP. This issue is observed is a corner case when some buffer which is registered with fastrpc framework is passed with some offset by user and then the DSP implementation tried to read the data. As DSP expects base address and takes care of offsetting with remote arguments, passing an offsetted address will result in some unexpected data read in DSP. All generic usecases usually pass the buffer as it is hence is problem is not usually observed. If someone tries to pass offsetted buffer and then tries to compare data at HLOS and DSP end, then the ambiguity will be observed. Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Cc: stable@kernel.org Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-17misc: fastrpc: Deregister device nodes properly in error scenariosAnandu Krishnan E
commit 637c20002dc8c347001292664055bfbf56544ec6 upstream. During fastrpc_rpmsg_probe, if secure device node registration succeeds but non-secure device node registration fails, the secure device node deregister is not called during error cleanup. Add proper exit paths to ensure proper cleanup in case of error. Fixes: 3abe3ab3cdab ("misc: fastrpc: add secure domain support") Cc: stable@kernel.org Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250110134239.123603-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-08drivers/card_reader/rtsx_usb: Restore interrupt based detectionSean Rhodes
commit 235b630eda072d7e7b102ab346d6b8a2c028a772 upstream. This commit reintroduces interrupt-based card detection previously used in the rts5139 driver. This functionality was removed in commit 00d8521dcd23 ("staging: remove rts5139 driver code"). Reintroducing this mechanism fixes presence detection for certain card readers, which with the current driver, will taken approximately 20 seconds to enter S3 as `mmc_rescan` has to be frozen. Fixes: 00d8521dcd23 ("staging: remove rts5139 driver code") Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-17misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set configRengarajan S
commit c7a5378a0f707686de3ddb489f1653c523bb7dcc upstream. Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set config. Upper level driver checks for -ENOTSUPP. Because of the return code mismatch, the ioctls from userspace fail. Resolve the issue by passing -ENOTSUPP during unsupported case. Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-17misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handlingRengarajan S
commit 194f9f94a5169547d682e9bbcc5ae6d18a564735 upstream. Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq. Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycleParker Newman
[ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05Compiler Attributes: disable __counted_by for clang < 19.1.3Jan Hendrik Farr
commit f06e108a3dc53c0f5234d18de0bd224753db5019 upstream. This patch disables __counted_by for clang versions < 19.1.3 because of the two issues listed below. It does this by introducing CONFIG_CC_HAS_COUNTED_BY. 1. clang < 19.1.2 has a bug that can lead to __bdos returning 0: https://github.com/llvm/llvm-project/pull/110497 2. clang < 19.1.3 has a bug that can lead to __bdos being off by 4: https://github.com/llvm/llvm-project/pull/112636 Fixes: c8248faf3ca2 ("Compiler Attributes: counted_by: Adjust name and identifier expansion") Cc: stable@vger.kernel.org # 6.6.x: 16c31dd7fdf6: Compiler Attributes: counted_by: bump min gcc version Cc: stable@vger.kernel.org # 6.6.x: 2993eb7a8d34: Compiler Attributes: counted_by: fixup clang URL Cc: stable@vger.kernel.org # 6.6.x: 231dc3f0c936: lkdtm/bugs: Improve warning message for compilers without counted_by support Cc: stable@vger.kernel.org # 6.6.x Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/all/20240913164630.GA4091534@thelio-3990X/ Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202409260949.a1254989-oliver.sang@intel.com Link: https://lore.kernel.org/all/Zw8iawAF5W2uzGuh@archlinux/T/#m204c09f63c076586a02d194b87dffc7e81b8de7b Suggested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jan Hendrik Farr <kernel@jfarr.cc> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20241029140036.577804-2-kernel@jfarr.cc Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-05misc: apds990x: Fix missing pm_runtime_disable()Jinjie Ruan
[ Upstream commit 3c5d8b819d27012264edd17e6ae7fffda382fe44 ] The pm_runtime_disable() is missing in probe error path, so add it to fix it. Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-29mei: use kvmalloc for read bufferAlexander Usyskin
Read buffer is allocated according to max message size, reported by the firmware and may reach 64K in systems with pxp client. Contiguous 64k allocation may fail under memory pressure. Read buffer is used as in-driver message storage and not required to be contiguous. Use kvmalloc to allow kernel to allocate non-contiguous memory. Fixes: 3030dc056459 ("mei: add wrapper for queuing control commands.") Cc: stable <stable@kernel.org> Reported-by: Rohit Agarwal <rohiagar@chromium.org> Closes: https://lore.kernel.org/all/20240813084542.2921300-1-rohiagar@chromium.org/ Tested-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Acked-by: Tomas Winkler <tomasw@gmail.com> Link: https://lore.kernel.org/r/20241015123157.2337026-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-20Merge tag 'char-misc-6.12-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fixes from Greg KH: "Here are a number of small char/misc/iio driver fixes for 6.12-rc4: - loads of small iio driver fixes for reported problems - parport driver out-of-bounds fix - Kconfig description and MAINTAINERS file updates All of these, except for the Kconfig and MAINTAINERS file updates have been in linux-next all week. Those other two are just documentation changes and will have no runtime issues and were merged on Friday" * tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits) misc: rtsx: list supported models in Kconfig help MAINTAINERS: Remove some entries due to various compliance requirements. misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device parport: Proper fix for array out-of-bounds access iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ...
2024-10-18misc: rtsx: list supported models in Kconfig helpYo-Jung (Leo) Lin
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but they are not mentioned in the Kconfig help when the code was added. List those models in the Kconfig help accordingly. Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com> Link: https://lore.kernel.org/r/20241017144747.15966-1-0xff07@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP deviceHeiko Thiery
By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 0969001569e4 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-2-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM deviceHeiko Thiery
By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 9ab5465349c0 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-1-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-09misc: sgi-gru: Don't disable preemption in GRU driverDimitri Sivanich
Disabling preemption in the GRU driver is unnecessary, and clashes with sleeping locks in several code paths. Remove preempt_disable and preempt_enable from the GRU driver. Signed-off-by: Dimitri Sivanich <sivanich@hpe.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-27[tree-wide] finally take no_llseek outAl Viro
no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-26Merge tag 'char-misc-6.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystem changes for 6.12-rc1. Lots of changes in here, primarily dominated by the usual IIO driver updates and additions, but there are also small driver subsystem updates all over the place. Included in here are: - lots and lots of new IIO drivers and updates to existing ones - interconnect subsystem updates and new drivers - nvmem subsystem updates and new drivers - mhi driver updates - power supply subsystem updates - kobj_type const work for many different small subsystems - comedi driver fix - coresight subsystem and driver updates - fpga subsystem improvements - slimbus fixups - binder new feature addition for "frozen" notifications - lots and lots of other small driver updates and cleanups All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits) greybus: gb-beagleplay: Add firmware upload API arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7 dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios MAINTAINERS: Update path for U-Boot environment variables YAML nvmem: layouts: add U-Boot env layout comedi: ni_routing: tools: Check when the file could not be opened ocxl: Remove the unused declarations in headr file hpet: Fix the wrong format specifier uio: Constify struct kobj_type cxl: Constify struct kobj_type binder: modify the comment for binder_proc_unlock iio: adc: axp20x_adc: add support for AXP717 ADC dt-bindings: iio: adc: Add AXP717 compatible iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0 tools: iio: rm .*.cmd when make clean iio: adc: standardize on formatting for id match tables iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems ...
2024-09-21Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ...
2024-09-18Merge tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add documentation for the mmc-test driver - Register the eMMC RPMB partition with the RPMB subsystem - Some various cleanups MMC host: - dw_mmc-rockchip: Add support for the RK3576 variant - renesas_sdhi: Add support for the RZ/V2H(P) variant - sdhci_am654: Add a retry mechanism for tuning - sdhci-atmel: Convert DT bindings to json schema - sdhci-of-dwcmshc: - Add eMMC HW reset support for BlueField-3 SoC - Add support for the RK3576 variant - Add support for the Sophgo SG2042 variant - sdhci-of-ma35d1: Add new driver for the Nuvoton MA35D1 SDHCI Misc/Tee: - Add Replay Protected Memory Block (RPMB) subsystem - Let optee probe RPMB device using RPMB subsystem" * tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (41 commits) mmc: core: Use dev_err_probe for deferred regulators optee: Fix a NULL vs IS_ERR() check mmc: sdhci_am654: Add prints to tuning algorithm mmc: sdhci_am654: Add retry tuning dt-bindings: mmc: Add support for rk3576 eMMC Documentation: mmc: Add mmc-test doc rpmb: fix error path in rpmb_dev_register() optee: add RPMB dependency mmc: block: add RPMB dependency mmc: core Convert UNSTUFF_BITS macro to inline function dt-bindings: mmc: sdhci-atmel: Convert to json schema mmc: core: Convert simple_stroul to kstroul mmc: core: Calculate size from pointer mmc: cqhci: Make use of cqhci_halted() routine mmc: core: Replace the argument of mmc_sd_switch() with defines mmc: dw_mmc-rockchip: Add support for rk3576 SoCs mmc: dw_mmc-rockchip: Add internal phase support dt-bindings: mmc: Add support for rk3576 dw-mshc mmc: sdhci-of-dwcmshc: Add hw_reset() support for BlueField-3 SoC mmc: core: remove left-over data structure declarations ...
2024-09-11ocxl: Remove the unused declarations in headr fileZhang Zekun
The definition of ocxl_create_cdev() and ocxl_destroy_cdev() has been removed since commit 75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend"). So, let's remove the empty declarations. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Link: https://lore.kernel.org/r/20240907082555.60836-1-zhangzekun11@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-11cxl: Constify struct kobj_typeHongbo Li
This 'struct kobj_type' is not modified. It is only used in kobject_init_and_add() which takes a 'const struct kobj_type *ktype' parameter. Constifying this structure and moving it to a read-only section, and can increase over all security. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://lore.kernel.org/r/20240904011951.2010646-1-lihongbo22@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-09Merge 6.11-rc7 into char-misc-nextGreg Kroah-Hartman
We need the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04rpmb: fix error path in rpmb_dev_register()Jens Wiklander
Until this patch was rpmb_dev_register() always freeing rdev in the error path. However, past device_register() it must not do that since the memory is now managed by the device even if it failed to register properly. So fix this by doing a put_device() before returning the error code. Fixes the smatch warning: drivers/misc/rpmb-core.c:204 rpmb_dev_register() warn: freeing device managed memory (leak): 'rdev' Fixes: 1e9046e3a154 ("rpmb: add Replay Protected Memory Block (RPMB) subsystem") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Link: https://lore.kernel.org/r/20240902105803.2885544-1-jens.wiklander@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-09-03VMCI: Fix use-after-free when removing resource in vmci_resource_remove()David Fernandez Gonzalez
When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove(). Fixes: bc63dedb7d46 ("VMCI: resource object implementation.") Cc: stable@vger.kernel.org Reported-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: David Fernandez Gonzalez <david.fernandez.gonzalez@oracle.com> Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03misc: keba: Fix sysfs group creationGerhard Engleder
sysfs_create_group() races with userspace. Use dev_groups instead which prevents all the problems of sysfs_create_group(). Fixes: a1944676767e ("misc: keba: Add basic KEBA CP500 system FPGA support") Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://lore.kernel.org/r/20240819192645.50171-1-gerhard@engleder-embedded.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03misc: tsl2550: replace simple_strtoul to kstrtoulHongbo Li
The function simple_strtoul performs no error checking in scenarios where the input value overflows the intended output variable. We can replace the use of the simple_strtoul with the safer alternatives kstrtoul. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://lore.kernel.org/r/20240830080311.3545307-1-lihongbo22@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03misc: lis3lv02d: Fix incorrect of_get_property() usageRob Herring (Arm)
The usage of of_get_property() is wrong. What's returned in "val" is the property's length, not the value. Fix this by using the preferred typed of_property_read_u32() function instead. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240828131851.3631855-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03misc: fastrpc: Fix double free of 'buf' in error pathSukrut Bellary
smatch warning: drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf' In fastrpc_req_mmap() error path, the fastrpc buffer is freed in fastrpc_req_munmap_impl() if unmap is successful. But in the end, there is an unconditional call to fastrpc_buf_free(). So the above case triggers the double free of fastrpc buf. Fixes: 72fa6f7820c4 ("misc: fastrpc: Rework fastrpc_req_munmap") Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240902141409.70371-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03misc: fastrpc: Add support for cdsp1 remoteprocLing Xu
The fastrpc supports 4 remoteproc. There are some products which support cdsp1 remoteproc. Add changes to support cdsp1 remoteproc. Signed-off-by: Ling Xu <quic_lxu5@quicinc.com> [Bartosz: ported to mainline] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240902141821.70656-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-01fault-inject: improve build for CONFIG_FAULT_INJECTION=nJani Nikula
The fault-inject.h users across the kernel need to add a lot of #ifdef CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and should_fail() to allow removal of conditional compilation. [akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h] [akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c] [akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen] Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com Fixes: 6ff1cb355e62 ("[PATCH] fault-injection capabilities infrastructure") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 14:05:23 +0000