summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2021-05-11mfd: da9063: Support SMBus and I2C modeHubert Streidl
[ Upstream commit 586478bfc9f7e16504d6f64cf18bcbdf6fd0cbc9 ] By default the PMIC DA9063 2-wire interface is SMBus compliant. This means the PMIC will automatically reset the interface when the clock signal ceases for more than the SMBus timeout of 35 ms. If the I2C driver / device is not capable of creating atomic I2C transactions, a context change can cause a ceasing of the clock signal. This can happen if for example a real-time thread is scheduled. Then the DA9063 in SMBus mode will reset the 2-wire interface. Subsequently a write message could end up in the wrong register. This could cause unpredictable system behavior. The DA9063 PMIC also supports an I2C compliant mode for the 2-wire interface. This mode does not reset the interface when the clock signal ceases. Thus the problem depicted above does not occur. This patch tests for the bus functionality "I2C_FUNC_I2C". It can reasonably be assumed that the bus cannot obey SMBus timings if this functionality is set. SMBus commands most probably are emulated in this case which is prone to the latency issue described above. This patch enables the I2C bus mode if I2C_FUNC_I2C is set or otherwise keeps the default SMBus mode. Signed-off-by: Hubert Streidl <hubert.streidl@de.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04mfd: gateworks-gsc: Fix interrupt typeTim Harvey
commit 8d9bf3c3e1451fc8de7b590040a868ade26d6b22 upstream. The Gateworks System Controller has an active-low interrupt. Fix the interrupt request type. Cc: <stable@vger.kernel.org> Fixes: d85234994b2f ("mfd: Add Gateworks System Controller core driver") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()Dan Carpenter
[ Upstream commit 26783d74cc6a440ee3ef9836a008a697981013d0 ] The "req" struct is always added to the "wm831x->auxadc_pending" list, but it's only removed from the list on the success path. If a failure occurs then the "req" struct is freed but it's still on the list, leading to a use after free. Fixes: 78bb3688ea18 ("mfd: Support multiple active WM831x AUXADC conversions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04mfd: altera-sysmgr: Fix physical address storing moreArnd Bergmann
[ Upstream commit b0b5b16b78cea1b2b990a69ab8e07a42ccf7a2ed ] A recent fix improved the way the resource gets passed to the low-level accessors, but left one warning that appears in configurations with a resource_size_t that is wider than a pointer: In file included from drivers/mfd/altera-sysmgr.c:19: drivers/mfd/altera-sysmgr.c: In function 'sysmgr_probe': drivers/mfd/altera-sysmgr.c:148:40: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 148 | regmap = devm_regmap_init(dev, NULL, (void *)res->start, | ^ include/linux/regmap.h:646:6: note: in definition of macro '__regmap_lockdep_wrapper' 646 | fn(__VA_ARGS__, &_key, \ | ^~~~~~~~~~~ drivers/mfd/altera-sysmgr.c:148:12: note: in expansion of macro 'devm_regmap_init' 148 | regmap = devm_regmap_init(dev, NULL, (void *)res->start, | ^~~~~~~~~~~~~~~~ I had tried a different approach that would store the address in the private data as a phys_addr_t, but the easiest solution now seems to be to add a double cast to shut up the warning. As the address is passed to an inline assembly, it is guaranteed to not be wider than a register anyway. Fixes: d9ca7801b6e5 ("mfd: altera-sysmgr: Fix physical address storing hacks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04mfd: bd9571mwv: Use devm_mfd_add_devices()Yoshihiro Shimoda
[ Upstream commit c58ad0f2b052b5675d6394e03713ee41e721b44c ] To remove mfd devices when unload this driver, should use devm_mfd_add_devices() instead. Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mfd: cpcap: Fix interrupt regression with regmap clear_ackTony Lindgren
[ Upstream commit 14639a22de657eabbb776f503a816594393cc935 ] With commit 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers"), the cpcap interrupts are no longer getting acked properly leading to a very unresponsive device with CPUs fully loaded spinning in the threaded IRQ handlers. To me it looks like the clear_ack commit above actually fixed a long standing bug in regmap_irq_thread() where we unconditionally acked the interrupts earlier without considering ack_invert. And the issue with cpcap started happening as we now also consider ack_invert. Tim Harvey <tharvey@gateworks.com> tried to fix this issue earlier with "[PATCH v2] regmap: irq: fix ack-invert", but the reading of the ack register was considered unnecessary for just ack_invert, and we did not have clear_ack available yet. As the cpcap irqs worked both with and without ack_invert earlier because of the unconditional ack, the problem remained hidden until now. Also, looks like the earlier v3.0.8 based Motorola Android Linux kernel does clear_ack style read-clear-write with "ireg_val & ~mreg_val" instead of just ack_invert style write. So let's switch cpcap to use clear_ack to fix the issue. Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers") Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Laxminath Kasam <lkasam@codeaurora.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Mark Brown <broonie@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-By: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mfd: stmfx: Fix dev_err_probe() call in stmfx_chip_init()Amelie Delaunay
[ Upstream commit d75846ed08e6f4135ec73778575c34d9c0ace993 ] 'ret' may be 0 so, dev_err_probe() should be called only when 'ret' is an error code. Fixes: 41c9c06c491a ("mfd: stmfx: Simplify with dev_err_probe()") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mfd: MFD_SL28CPLD should depend on ARCH_LAYERSCAPEGeert Uytterhoeven
[ Upstream commit de1292817cf736c04fab31903a6aa9d9ffe60b79 ] Currently the Kontron sl28cpld Board Management Controller is found only on Kontron boards equipped with a Freescale Layerscape SoC. Hence add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about a driver for this controller when configuring a kernel without Layerscape support. Fixes: a538ad229bbee4f8 ("mfd: simple-mfd-i2c: Add sl28cpld support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Michael Walle <michael@walle.cc> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30mfd: htc-i2cpld: Add the missed i2c_put_adapter() in htcpld_register_chip_i2c()Jing Xiangfeng
[ Upstream commit 9a463284706c5217872c3cadaca863d47129bd95 ] htcpld_register_chip_i2c() misses to call i2c_put_adapter() in an error path. Add the missed function call to fix it. Fixes: 6048a3dd2371 ("mfd: Add HTCPLD driver") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-05mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPILee Jones
drivers/mfd/kempld-core.c:556:36: warning: unused variable 'kempld_acpi_table' [-Wunused-const-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-10-05mfd: sl28cpld: Depend on I2CLee Jones
Fixes the following randconfig build error: ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_probe': simple-mfd-i2c.c:(.text+0x48): undefined reference to `__devm_regmap_init_i2c' ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_init': simple-mfd-i2c.c:(.init.text+0x14): undefined reference to `i2c_register_driver' ld: drivers/mfd/simple-mfd-i2c.o: in function `simple_mfd_i2c_driver_exit': simple-mfd-i2c.c:(.exit.text+0xd): undefined reference to `i2c_del_driver' Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: asic3: Build if COMPILE_TEST=yMarek Behún
Build this driver on another platforms if COMPILE_TEST=y. Another drivers may depend on this, for example leds-asic3. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: Add ACPI support to Kontron PLD driverMichael Brunner
Recent Kontron COMe modules identify the PLD device using the hardware id KEM0001 in the ACPI table. This patch adds support for probing the device using the HID and also retrieving the resources. As this is not available for all products, the DMI based detection still needs to be around for older systems. It is executed if no matching ACPI HID is found during registering the platform driver or no specific device id is forced. If a device is detected using ACPI and no resource information is available, the default io resource is used. Forcing a device id with the force_device_id parameter and therefore manually generating a platform device takes precedence over ACPI during probing. Signed-off-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PACXu Yilun
This patch implements the basic functions of the BMC chip for some Intel FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the Intel MAX 10 CPLD. This BMC chip is connected to the FPGA by a SPI bus. To provide direct register access from the FPGA, the "SPI slave to Avalon Master Bridge" (spi-avmm) IP is integrated in the chip. It converts encoded streams of bytes from the host to the internal register read/write on the Avalon bus. So This driver uses the regmap-spi-avmm for register accessing. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: lp87565: Add LP87524-Q1 variantLuca Ceresoli
Add support for the LP87524B/J/P-Q1 Four 4-MHz Buck Converter. This is a variant of the LP87565 having 4 single-phase outputs and up to 10 A of total output current. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: mt6360: Remove unused include <linux/version.h>YueHaibing
This file does not make use of it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: sm501: Fix leaks in probe()Dan Carpenter
This code should clean up if sm501_init_dev() fails. Fixes: b6d6454fdb66 ("[PATCH] mfd: SM501 core driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: syscon: Don't free allocated name for regmap_configMarc Zyngier
The name allocated for the regmap_config structure is freed pretty early, right after the registration of the MMIO region. Unfortunately, that doesn't follow the life cycle that debugfs expects, as it can access the name field long after the free has occurred. Move the free on the error path, and keep it forever otherwise. Fixes: e15d7f2b81d2 ("mfd: syscon: Use a unique name with regmap_config") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: sprd: Add wakeup capability for PMIC IRQBaolin Wang
When changing to use suspend-to-idle to save power, the PMIC irq can not wakeup the system due to lack of wakeup capability, which will cause the sub-irqs (such as power key) of the PMIC can not wake up the system. Thus we can add the wakeup capability for PMIC irq to solve this issue, as well as removing the IRQF_NO_SUSPEND flag to allow PMIC irq to be a wakeup source. Reported-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Baolin Wang <baolin.wang7@gmail.com> Tested-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: intel-lpss: Add device IDs for UART ports for LakefieldAndy Shevchenko
Add PCI IDs for Lakefield to the list of supported UARTs. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: dm355evm_msp: Convert LEDs to GPIO descriptor tableLinus Walleij
This converts the DaVinci DM355EVM LEDs to use GPIO descriptor look-ups. Cc: Sekhar Nori <nsekhar@ti.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: wcd934x: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: stmfx: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: madera: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: ene-kb3930: Add driver for ENE KB3930 Embedded ControllerLubomir Rintel
This driver provides access to the EC RAM of said embedded controller attached to the I2C bus as well as optionally supporting its slightly weird power-off/restart protocol. A particular implementation of the EC firmware can be identified by a model byte. If this driver identifies the Dell Ariel platform, it registers the appropriate cells. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: khadas-mcu: Fix randconfig 'unused-const-variable' warningLee Jones
When testing with !OF, the build system reports: >> drivers/mfd/khadas-mcu.c:125:34: warning: unused variable 'khadas_mcu_of_match' [-Wunused-const-variable] static const struct of_device_id khadas_mcu_of_match[] = { ^ Reported-by: kernel test robot <lkp@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: rn5t618: Add a power supply subdeviceAndreas Kemnade
The RN5T618 and RC5T619 both have a charger and a fuel gauge, so add a subdevice for it. According to drivers in the wild, things should be at least similar, but since it is not tested, add it only to the RC5T619. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-30mfd: Kconfig: Fix typo of 'individual'Mauro Carvalho Chehab
individul -> individual Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17mfd: simple-mfd-i2c: Add sl28cpld supportMichael Walle
Add the core support for the board management controller found on the SMARC-sAL28 board. Also add a virtual symbol which pulls in the simple-mfd-i2c driver and provide a common symbol on which the subdevice drivers can depend on. At the moment, this controller is used on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-17mfd: Add simple regmap based I2C driverMichael Walle
There are I2C devices which contain several different functions but doesn't require any special access functions. For these kind of drivers an I2C regmap should be enough. Create an I2C driver which creates an I2C regmap and enumerates its children. If a device wants to use this as its MFD core driver, it has to add an individual compatible string. It may provide its own regmap configuration. Subdevices can use dev_get_regmap() on the parent to get their regmap instance. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-28Merge tag 'mfd-fixes-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fixes from Lee Jones: - fix double free - handle devicetree disabled devices gracefully * tag 'mfd-fixes-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mfd-core: Ensure disabled devices are ignored without error mfd: core: Fix double-free in mfd_remove_devices_fn()
2020-08-28mfd: mfd-core: Ensure disabled devices are ignored without errorLee Jones
Commit e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") changed the semantics for disabled devices in mfd_add_device(). Instead of silently ignoring a disabled child device, an error was returned. On receipt of the error mfd_add_devices() the precedes to remove *all* child devices and returns an all-failed error to the caller, which will inevitably fail the parent device as well. This patch reverts back to the old semantics and ignores child devices which are disabled in Device Tree. Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Reported-by: Icenowy Zheng <icenowy@aosc.io> Tested-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-24mfd: core: Fix double-free in mfd_remove_devices_fn()Dmitry Osipenko
The pdev.mfd_cell is released by platform_device_release(), which is invoked by platform_device_unregister(). Hence mfd_remove_devices_fn() shouldn't release the cell variable. The double-free bug is reported KASAN during of MFD driver module removal. Fixes: 466a62d7642f ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-15Merge tag 'mfd-next-5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
2020-08-13mfd: syscon: Use a unique name with regmap_configSuman Anna
The DT node full name is currently being used in regmap_config which in turn is used to create the regmap debugfs directories. This name however is not guaranteed to be unique and the regmap debugfs registration can fail in the cases where the syscon nodes have the same unit-address but are present in different DT node hierarchies. Replace this logic using the syscon reg resource address instead (inspired from logic used while creating platform devices) to ensure a unique name is given for each syscon. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: dln2: Run event handler loop under spinlockAndy Shevchenko
The event handler loop must be run with interrupts disabled. Otherwise we will have a warning: [ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts [ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170 [ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170 ... [ 1970.946994] Call Trace: [ 1970.949446] <IRQ> [ 1970.951471] handle_irq_event_percpu+0x2c/0x80 [ 1970.955921] handle_irq_event+0x23/0x43 [ 1970.959766] handle_simple_irq+0x57/0x70 [ 1970.963695] generic_handle_irq+0x42/0x50 [ 1970.967717] dln2_rx+0xc1/0x210 [dln2] [ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0 [ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0 [ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0 [ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0 ... Recently xHCI driver switched to tasklets in the commit 36dc01657b49 ("usb: host: xhci: Support running urb giveback in tasklet context"). The handle_irq_event_* functions are expected to be called with interrupts disabled and they rightfully complain here because we run in tasklet context with interrupts enabled. Use a event spinlock to protect event handler from being interrupted. Note, that there are only two users of this GPIO and ADC drivers and both of them are using generic_handle_irq() which makes above happen. Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: madera: Improve handling of regulator unbindingCharles Keepax
The current unbinding process for Madera has some issues. The trouble is runtime PM is disabled as the first step of the process, but some of the drivers release IRQs causing regmap IRQ to issue a runtime get which fails. To allow runtime PM to remain enabled during mfd_remove_devices, the DCVDD regulator must remain available. In the case of external DCVDD's this is simple, the regulator can simply be disabled/put after the call to mfd_remove_devices. However, in the case of an internally supplied DCVDD the regulator needs to be released after the other MFD children depending on it. Use the new MFD mfd_remove_devices_late functionality to split the DCVDD regulator off from the other drivers. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: mfd-core: Add mechanism for removal of a subset of childrenCharles Keepax
Currently, the only way to remove MFD children is with a call to mfd_remove_devices, which will remove all the children. Under some circumstances it is useful to remove only a subset of the child devices. For example if some additional clean up is required between removal of certain child devices. To accomplish this a level field is added to mfd_cell, the normal mfd_remove_devices is modified to not remove devices that are set to a higher level and a corresponding mfd_remove_devices_late function is added to remove those children. See further discussion at: https://lore.kernel.org/lkml/20200616075834.GF2608702@dell/ Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: intel_soc_pmic_mrfld: Simplify the return expression of ↵Xu Wang
intel_scu_ipc_dev_iowrite8() Simplify the return expression. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: max14577: Remove redundant initialization of variable current_bitsColin Ian King
The variable current_bits is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: rn5t618: Fix caching of battery related registersAndreas Kemnade
Battery status changes dynamically, so the corresponding registers need to be considered volatile. Affected registers are: - fuel gauge - battery status - battery interrupt Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: rn5t618: Make restart handler atomic safeAndreas Kemnade
The restart handler is executed during the shutdown phase which is atomic/irq-less. The i2c framework supports atomic transfers since commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") to address this use case. Using i2c regmap in that situation is not allowed: [ 165.177465] [ BUG: Invalid wait context ] [ 165.181479] 5.8.0-rc3-00003-g0e9088558027-dirty #11 Not tainted [ 165.187400] ----------------------------- [ 165.191410] systemd-shutdow/1 is trying to lock: [ 165.196030] d85b4438 (rn5t618:170:(&rn5t618_regmap_config)->lock){+.+.}-{3:3}, at: regmap_update_bits_base+0x30/0x70 [ 165.206573] other info that might help us debug this: [ 165.211625] context-{4:4} [ 165.214248] 2 locks held by systemd-shutdow/1: [ 165.218691] #0: c131c47c (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x204 [ 165.227405] #1: c131efb4 (rcu_read_lock){....}-{1:2}, at: __atomic_notifier_call_chain+0x0/0x118 [ 165.236288] stack backtrace: [ 165.239174] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.8.0-rc3-00003-g0e9088558027-dirty #11 [ 165.248220] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 165.254330] [<c0112110>] (unwind_backtrace) from [<c010bfa0>] (show_stack+0x10/0x14) [ 165.262084] [<c010bfa0>] (show_stack) from [<c058093c>] (dump_stack+0xe8/0x120) [ 165.269407] [<c058093c>] (dump_stack) from [<c01835a4>] (__lock_acquire+0x81c/0x2ca0) [ 165.277246] [<c01835a4>] (__lock_acquire) from [<c0186344>] (lock_acquire+0xe4/0x490) [ 165.285090] [<c0186344>] (lock_acquire) from [<c0c98638>] (__mutex_lock+0x74/0x954) [ 165.292756] [<c0c98638>] (__mutex_lock) from [<c0c98f34>] (mutex_lock_nested+0x1c/0x24) [ 165.300769] [<c0c98f34>] (mutex_lock_nested) from [<c07593ec>] (regmap_update_bits_base+0x30/0x70) [ 165.309741] [<c07593ec>] (regmap_update_bits_base) from [<c076b838>] (rn5t618_trigger_poweroff_sequence+0x34/0x64) [ 165.320097] [<c076b838>] (rn5t618_trigger_poweroff_sequence) from [<c076b874>] (rn5t618_restart+0xc/0x2c) [ 165.329669] [<c076b874>] (rn5t618_restart) from [<c01514f8>] (notifier_call_chain+0x48/0x80) [ 165.338113] [<c01514f8>] (notifier_call_chain) from [<c01516a8>] (__atomic_notifier_call_chain+0x70/0x118) [ 165.347770] [<c01516a8>] (__atomic_notifier_call_chain) from [<c0151768>] (atomic_notifier_call_chain+0x18/0x20) [ 165.357949] [<c0151768>] (atomic_notifier_call_chain) from [<c010a828>] (machine_restart+0x68/0x80) [ 165.367001] [<c010a828>] (machine_restart) from [<c0153224>] (__do_sys_reboot+0x11c/0x204) [ 165.375272] [<c0153224>] (__do_sys_reboot) from [<c0100080>] (ret_fast_syscall+0x0/0x28) [ 165.383364] Exception stack(0xd80a5fa8 to 0xd80a5ff0) [ 165.388420] 5fa0: 00406948 00000000 fee1dead 28121969 01234567 73299b00 [ 165.396602] 5fc0: 00406948 00000000 00000000 00000058 be91abc8 00000000 be91ab60 004056f8 [ 165.404781] 5fe0: 00000058 be91aabc b6ed4d45 b6e56746 Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: kempld-core: Fix 'assignment of read-only location' errorStephen Rothwell
drivers/mfd/kempld-core.c: In function 'kempld_register_cells_generic': drivers/mfd/kempld-core.c:105:13: error: assignment of read-only location 'devs[i++]' 105 | devs[i++] = kempld_devs[KEMPLD_I2C]; | ^ drivers/mfd/kempld-core.c:108:13: error: assignment of read-only location 'devs[i++]' 108 | devs[i++] = kempld_devs[KEMPLD_WDT]; | ^ drivers/mfd/kempld-core.c:111:13: error: assignment of read-only location 'devs[i++]' 111 | devs[i++] = kempld_devs[KEMPLD_GPIO]; | ^ drivers/mfd/kempld-core.c:114:13: error: assignment of read-only location 'devs[i++]' 114 | devs[i++] = kempld_devs[KEMPLD_UART]; | ^ Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: axp20x: Allow the AXP803 to be probed by I2CFrank Lee
The AXP803 can be used both using the RSB proprietary bus, or a more traditional I2C bus. Let's add that possibility. Signed-off-by: Frank Lee <frank@allwinnertech.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: da9063: Add support for latest DA silicon revisionAdam Thomson
This update adds new regmap tables to support the latest DA silicon which will automatically be selected based on the chip and variant information read from the device. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: da9063: Fix revision handling to correctly select reg tablesAdam Thomson
The current implementation performs checking in the i2c_probe() function of the variant_code but does this immediately after the containing struct has been initialised as all zero. This means the check for variant code will always default to using the BB tables and will never select AD. The variant code is subsequently set by device_init() and later used by the RTC so really it's a little fortunate this mismatch works. This update adds raw I2C read access functionality to read the chip and variant/revision information (common to all revisions) so that it can subsequently correctly choose the proper regmap tables for real initialisation. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: motorola-cpcap: Disable interrupt for suspendTony Lindgren
Otherwise we get spammed with errors on resume after rtcwake: cpcap-core spi0.0: Failed to read IRQ status: -108 Note that rtcwake is still capable of waking up the system with this patch. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 00:07:45 +0000