| Age | Commit message (Collapse) | Author |
|---|
|
Complete the conversion from soc_camera to a full fledge media
controller enabled devices for all supported generations of the device.
All work is already done as this is already supported on Gen3, and
later.
All that is missing is removing all special cases for the non
media-graph call paths and use the common ones in their place.
The one change that stands out is dropping the doubling of the height in
the Gen2 scaler setup, rvin_scaler_gen2(). In the Gen2 non-MC world the
VIN size was set to match the video source subdevices, and if that was a
TOP/BOTTOM video source it needed to be doubled for the scaler to
function properly. In the MC world this is now handled by user-space
configuration of the pipeline and the adjustment is not needed.
Mark the completion of converting from soc_camera by injecting an
attribution of myself in the header.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-13-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Before moving Gen2 to media controller simplify the creation of controls
by not exposing the sub-device controls on the video device. This could
be done while enabling media controller but doing it separately reduces
the changes needed to do so.
The rework also allows the cleanup and remove paths to be simplified by
folding all special cases into the only remaining call site.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-12-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
On Gen2 where sub-devices where not exposed to user-space the field
TB/BT ordering was controlled by a hack in the VIN driver. Before
converting it to media device model where the subdevice is exposed
remove that hack.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-11-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare for Gen2 media graph support by always initializing a media pad
for the VIN device.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-10-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The VIN usage of v4l-async is complex and stems from organic growth of
the driver of supporting both private local subdevices (Gen2, Gen3) and
subdevices shared between all VIN instances (Gen3 and Gen4).
The driver used a separate notifier for each VIN for the private local
ones, and a shared group notifier for the shared ones. This was complex
and lead to subtle bugs when unbinding and later rebinding subdevices in
one of the notifiers having to handle different edge cases depending on
if it also had subdevices in the other notifiers etc.
To simplify this have the Gen2 devices allocate and form a VIN group
too. This way all subdevices on all models can be collect in a
single group notifier. Then there is only a single complete callback for
all where the video devices and subdevice nodes can be registered etc.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-9-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Use the __free(fwnode_handle) hooks to free the endpoints when the
function exits to simplify the error paths and make the intent more
clear.
While at it correct the error message when failing to parse an endpoint
to report the correct node.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-8-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The R-Car VIN driver is needlessly complex and uses more then one
v4l-async notifier to attach to all its subdevices. Prepare for unifying
them by moving rvin_parallel_parse_of() to where it needs to be when
they are unified.
The function is moved verbatim and there is no change in behavior.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-7-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare to move Gen2 and earlier models to media controller by
generating a unique VIN group id for each VIN instance. On Gen3 and Gen4
it is important to have a specific id in the group as media graph routes
depend on this. On Gen2 and earlier models all that will matter is to
have a unique id in the range.
Break out the id generation to a own function keeping the logic for Gen3
and Gen4 while generating a sequential id for Gen2 models.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-6-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare for more failed probe conditions that needs cleanup by
converting the error path to use labels.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The link setup callback once acted on each VIN instance, and expected to
be called once for each VIN instance. This have changed as the driver
grew support for later hardware generations and the callback is now
expected to setup links for all VIN in the group.
The argument to the callback has however remained a pointer to a single
VIN instance. This pointer was then used to get the group structure. Fix
this and pass the group as the single argument to the link setup
callback making the expectation of the function clear.
There is no intentional change in behavior.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When the transition of Gen2 to use groups are complete the platform
specific information can be retrieved from the group instead of being
duplicated in each VIN's private data structure.
Prepare for this by already adding the information to the group
structure so it can be used without first having to find the group from
a VIN instances private data.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When extending the driver with Gen4 support the iteration of over
possible remote subdevices changed from being R-Car CSI-2 Rx only to
also cover R-Car CSISP instances. In two loops updating the bounds
variable was missed.
This had no ill effect as the count the two values have always been the
same in the past. Fix it by looking at the array size.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250613153434.2001800-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add D-PHY support for V4H in addition to the already supported C-PHY.
The common start-up procedure for C-PHY and D-PHY is shared, only PHY
setup differ. Extend the V4H setup with D-PHY support as documented in
the datasheet (Rev.1.21).
Most of the start-up procedure is only documented as magic values in
tables, there is little documentation to make the settings more clear.
Wherever possible formulas or lookup tables are used as they are
documented in the datasheet.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-5-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare for adding D-PHY support to the driver by first updating the
generic startup procedure that covers both C-PHY and D-PHY operations.
The starting procedure where updated in later versions of the datasheet.
Most of the configuration is only documented as tables of magic values
in the documentation. Each step is however marked with a T<n> marker,
inject these markers in the comments to make it easier to map driver to
documentation.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Each AFE lane has a set of control and offset registers. The registers
themself are undocumented but later datasheets program more of them with
magic values. Before exploding the driver with more defines to name them
all rework the AFE ones to be able to address all controls and offsets.
Also move a stray define that is out of sequence.
There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The helper function to deal with calculating the link speed is designed
in such a way that it returns the correct type bps (bits per second) for
D-PHY and sps (symbols per second) for C-PHY. And for historical reasons
the function kept the name mbps.
This is confusing, fix it by having the function only deal with bps
values as this is the most common use-case and convert bps to sps in the
only function where it is needed to configure the C-PHY.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250612175904.1126717-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
|
|
The HW iommu is able to support a 34-bit iova address-space (16GB),
enable this feature for the encoder/decoder driver by shifting the
address by two bits and setting the extended address registers.
Signed-off-by: Jianhua Lin <jianhua.lin@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
During initialization, the post processor allocates the same number of
buffers as the buf queue.
As the init function is called in streamon(), if an allocation fails,
streamon will return an error and streamoff() will not be called, keeping
all post processor buffers allocated.
To avoid that, all post proc buffers are freed in case of an allocation
error.
Fixes: 26711491a807 ("media: verisilicon: Refactor postprocessor to store more buffers")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
mdp_get_plat_device() was added in 2022 but has remained unused.
Remove it.
Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver")
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The kernel test robot reports the following error when building on
Hexagon with hexagon-allmodconfig.
ERROR: modpost: "__hexagon_divdi3"
[drivers/media/platform/amlogic/c3/mipi-csi2/c3-mipi-csi2.ko] undefined!
The error is caused by using DIV_ROUND_UP() with a 64 bits divisor with
a 32-bit dividend, which on Hexagon and clang-17 is resolved with a call
to the __hexagon_divdi3() helper function, part of the compiler support
library and not available when building Linux.
Use DIV_ROUND_UP_ULL() to fix the build error and avoid calling the
__hexagon_divdi3() helper function.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505101334.UHxNcUUO-lkp@intel.com/
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The C3 ISP supports multi-camera and multi-exposure HDR, integrates
advanced imaging technologies for optimal quality, and drives the
core pipeline to transform raw sensor data into high-fidelity images
through demosaicing, color correction, and tone mapping operations.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: drop unnecessary vb2_ops_wait_prepare/finish callbacks]
|
|
Add a driver for the MIPI adapter unit found on the Amlogic C3 SoC.
This driver is used to align the MIPI data from the MIPI CSI-2 receiver
unit and send the aligned data to the ISP unit.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add a driver for the CSI-2 receiver unit found on the Amlogic C3 SoC.
Create a drivers/media/platform/amlogic/c3/ directory to host the driver
and the forthcoming support for the Amlogic C3 MIPI adapter and C3 ISP.
This driver is used to receive the MIPI data from image sensor.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix typo: uinit -> unit]
|
|
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: d33186d0be18 ("[media] omap3isp: ccdc: Use the DMA API for LSC")
Fixes: 0e24e90f2ca7 ("[media] omap3isp: stat: Use the DMA API")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The sequence number communicate the lost frames to userspace. For this
reason, it must be incremented even when a frame is skipped. This allows
userspace such as GStreamer to report the loss.
Fixes: 7b59b132ad439 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This variable is used to fill the v4l2_buffer.sequence, let's name it
the exact same way to reduce confusion.
No functional changes.
Fixes: 7b59b132ad439 ("media: platform: synopsys: Add support for HDMI input driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Now that the VSP1 driver supports color spaces, expose them through the
API used by the DU driver. This allows configuring the YCbCr encoding
and quantization used by each plane, ensuring correct color rendering.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-9-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The vsp1_drm structure defines an anonymous nested structure to store
per-input data. In preparation for extending that structure, give it a
name and is it through the driver. This improves code readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-8-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The RPF and WPF support different encodings and quantizations when
converting between RGB and YUV formats. Allow setting the corresponding
format parameters from userspace, and configure the hardware
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-7-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The vsp1 driver implements very partial colour space support: it
hardcodes the colorspace field on all video devices and subdevices to
V4L2_COLORSPACE_SRGB, regardless of the configured format. The
xfer_func, ycbcr_enc and quantization fields are not set (except for
hsv_enc for HSV formats on video devices). This doesn't match the
hardware configuration, which handles YUV data as encoding in BT.601
with limited range.
As a first step towards colour space configuration, keep the colour
space fields hardcoded, but set them based on the selected format type
(RGB, YUV or HSV).
While at it, remove an extra blank line.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-6-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The RWPF source pad media bus code can only be different from the sink
pad code when enabling color space conversion, which can only convert
between RGB and YUV. If the sink pad code is HSV, no conversion is
possible. Fix the pad set format handler to reflect this hardware
limitation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The HSV formats are not restricted to Gen2 platforms, but to VSP
instances that implement the HSI and HST modules. Make it conditional to
the VSP1_HAS_HSIT feature flag.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-4-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Not all VSP instance incorporate the HSI and HST modules. Add a
VSP1_HAS_HSIT feature flag, and create the modules only on VSP instances
that implement them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The VSP1 driver is missing the ability to enumerate pixel formats on its
video nodes, which is supposed to be supported according to the V4L2
API. Implement the enumeration to fix this issue.
As the device is media controller-centric, also implement the ability to
filter pixel formats by media bus code, and report the missing
V4L2_CAP_IO_MC capability.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250429232904.26413-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Replace '%08x->%p4cc' printk modifier to print FourCC codes for pixel
formats.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250330091738.27052-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When the RPF/WPF units are used for ISP interfacing through
the IIF, the set of accessible registers is limited compared to
the regular VSPD operations.
Support ISP interfacing in the rpf and wpf entities by checking if
the pipe features an IIF instance and writing only the relevant
registers.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250401-v4h-iif-v7-4-cc547c0bddd5@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
vsp1_wpf.c calls vsp1_rwpf_init_ctrls() to initialize controls that
are common between RPF and WPF.
However, the vsp1_wpf.c implementation does not check for the function
call return value. Fix this by propagating to the caller the return
value.
While at it, drop a duplicated error message in wpf_init_controls() as
the caller already report it.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250401-v4h-iif-v7-3-cc547c0bddd5@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The vsp1_dl library allows to program a display list and feed it
continuously to the VSP2. As an alternative operation mode, the library
allows to program the VSP2 in 'single shot' mode, where a display list
is submitted to the VSP on request only.
Currently the 'single shot' mode is only available when the VSP2 is
controlled by userspace, while it works in continuous mode when driven
by DRM, as frames have to be submitted to the display continuously.
For the VSPX use case, where there is no uapi support, we should however
work in single-shot mode as the ISP driver programs the VSPX on
request.
Initialize the display lists in single shot mode in case the VSP1 is
controlled by userspace or in case the pipeline features an IIF entity,
as in the VSPX case.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250401-v4h-iif-v7-2-cc547c0bddd5@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The IIF (ISP InterFace) is a VSP2 function that transfers data
to the ISP by reading from external memory through two RPF
instances.
Add support for it in the vsp1 driver by introducing a new entity
type. The sole required operation is to enable the IIF function
during configure_stream().
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250401-v4h-iif-v7-1-cc547c0bddd5@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Extend the device tree parsing to optionally parse the cs memory region
by name. The change is backward compatible with the device tree model
where a single unnamed region describes only the ISP channel select
function.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250423163113.2961049-8-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Prepare for extending the driver to in addition to supporting the
channel selector (CS) also support the core ISP. The two different
functions have different base addresses so the driver needs to
distinguish between them.
Prepare for this by marking existing base address variable and
read/write functions to make it clear they operate on the CS portion of
the driver. There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250423163113.2961049-7-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Before extending the driver with functions from the R-Car ISP core that
will span multiple files move the existing driver to a separate
directory. While at it rename the single source file to allow future
files to be grouped by functions.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250423163113.2961049-6-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fix the following to get RAW10 formats working:
In rvin_formats, the bpp is set to 4 for RAW10. As VIN unpacks RAW10 to
16-bit containers, the bpp should be 2.
Don't set VNDMR_YC_THR to the VNDMR register. The YC_THR is "YC Data
Through Mode", used for YUV formats and should not be set for RAW10.
Fixes: 1b7e7240eaf3 ("media: rcar-vin: Add support for RAW10")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-4-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
On Gen4 we need to set VNMC's EXINF to a different value (1) than in
Gen3 (0). Add a define for this, and set the bit for Gen4.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-3-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Remove unnecessary checks wrt. formats and interfaces in rvin_setup().
The validity of the formats has already been checked earlier.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-2-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Currently Gen4 VINs are marked as RCAN_GEN3 models. Add a new enum
value, RCAR_GEN4, and use it for Gen4 VINs. No functional changes in
this patch.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20250424-rcar-fix-raw-v2-1-f6afca378124@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add platform data for QCS8300, which has different capabilities compared
to SM8550. Introduce a QCS8300 header that defines these capabilities.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
