summaryrefslogtreecommitdiff
path: root/drivers/media/i2c/ov2640.c
AgeCommit message (Collapse)Author
2019-08-13media: i2c: Convert to new i2c device probe()Kieran Bingham
The I2C core framework provides a simplified probe framework from commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"). These drivers do not utilise the i2c_device_id table in the probe, so we can easily convert them to utilise the simplified i2c driver registration. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-23media: media/i2c: don't return ENOTTY if SUBDEV_API is not setHans Verkuil
If CONFIG_VIDEO_V4L2_SUBDEV_API is not set, then it is still possible to call set_fmt for V4L2_SUBDEV_FORMAT_TRY, the result is just not stored. So return 0 instead of -ENOTTY. Calling get_fmt with V4L2_SUBDEV_FORMAT_TRY should return -EINVAL instead of -ENOTTY, after all the get_fmt functionality is still present, just not supported for TRY. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-09Merge tag 'media/v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Atmel microship ISC driver - coda has gained support for mpeg2 and mpeg4 - cxusb gained support for analog TV - rockchip staging driver was split into two separate staging drivers - added a new staging driver for Allegro DVT video IP core - added a new staging driver for Amlogic Meson video decoder - lots of improvements and cleanups * tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits) media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs media: doc-rst: Fix typos media: radio-raremono: change devm_k*alloc to k*alloc media: stv0297: fix frequency range limit media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes media: dvb_frontend: split dvb_frontend_handle_ioctl function media: mceusb: disable "nonsensical irdata" messages media: rc: remove redundant dev_err message media: cec-notifier: add new notifier functions media: cec: add struct cec_connector_info support media: cec-notifier: rename variables, check kstrdup and n->conn_name media: MAINTAINERS: Add maintainers for Media Controller media: staging: media: tegra-vde: Defer dmabuf's unmapping media: staging: media: tegra-vde: Add IOMMU support media: hdpvr: fix locking and a missing msleep media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom() media: atmel: atmel-isc: fix i386 build error media: v4l2-ctrl: Move compound control initialization media: hantro: Use vb2_get_buffer media: pci: cx88: Change the type of 'missed' to u64 ...
2019-06-24media: i2c: ov2640: simplify getting the adapter of a clientWolfram Sang
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-25media: ov2640: fix initial try formatAkinobu Mita
Set initial try format with default configuration instead of current one. Fixes: 8d3b307a150a ("media: ov2640: make VIDIOC_SUBDEV_G_FMT ioctl work with V4L2_SUBDEV_FORMAT_TRY") Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: ov2640: set all mbus format field when G_FMT and S_FMT ioctlsAkinobu Mita
This driver doesn't set all members of mbus format field when the VIDIOC_SUBDEV_{S,G}_FMT ioctls are called. This is detected by v4l2-compliance. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: ov2640: make VIDIOC_SUBDEV_G_FMT ioctl work with V4L2_SUBDEV_FORMAT_TRYAkinobu Mita
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE is specified. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: ov2640: set default window and format code at probe timeAkinobu Mita
Set default window and format code at probe time instead of always checking if they have not been set yet when VIDIOC_SUBDEV_G_FMT ioctl is called. This change simplifies the next patch (make VIDIOC_SUBDEV_G_FMT ioctl work with V4L2_SUBDEV_FORMAT_TRY). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: ov2640: support log_status ioctl and event interfaceAkinobu Mita
This adds log_status ioctl and event interface for ov2640's v4l2 controls. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: ov2640: add V4L2_CID_TEST_PATTERN controlAkinobu Mita
The ov2640 has the test pattern generator features. This makes use of it through V4L2_CID_TEST_PATTERN control. [Sakari Ailus: Use "Eight Vertical Colour Bars" as the second manu entry] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-03media: v4l: Remove support for crop default target in subdev driversSakari Ailus
The V4L2 sub-device API does not support the crop default target. A number of drivers apparently still did support this, likely as it was needed by the SoC camera framework. Drop support for the default crop rectaingle in sub-device drivers, and use the bounds rectangle in SoC camera instead. Reported-by: Helmut Grohne <h.grohne@intenta.de> Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-17media: ov2640: make s_ctrl() work in power-down modeAkinobu Mita
The s_ctrl() operation can be called when the device is placed into power down mode. Then, applying controls to H/W should be postponed at this time. Instead the controls will be restored when the streaming is started. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-17media: ov2640: make set_fmt() work in power-down modeAkinobu Mita
The set_fmt() subdev pad operation for this driver currently does not only do the driver internal format selection but also do the actual register setup. This doesn't work if the device power control via GPIO lines is enabled. Because the set_fmt() can be called when the device is placed into power down mode. First of all, this fix adds flag to keep track of whether the device starts streaming or not. Then, the set_fmt() postpones applying the actual register setup at this time. Instead the setup will be applied when the streaming is started. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-01-23media: entity: Add a nop variant of media_entity_cleanupSakari Ailus
Add nop variant of media_entity_cleanup. This allows calling media_entity_cleanup whether or not Media controller is enabled, simplifying driver code. Also drop #ifdefs on a few drivers around media_entity_cleanup(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: ov2640: don't clear V4L2_SUBDEV_FL_IS_I2CAkinobu Mita
The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the subdev->flags. But this driver overwrites subdev->flags immediately after calling v4l2_i2c_subdev_init(). So V4L2_SUBDEV_FL_IS_I2C is not set after all. This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C. Side note: According to the comment in v4l2_device_unregister(), this is problematic only if the device is platform bus device. Device tree or ACPI based devices are not affected. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-04[media] ov2640: make array reset_seq static, reduces object code sizeColin Ian King
Don't populate the array reset_seq on the stack, instead make it static. Makes the object code smaller by over 50 bytes: Before: text data bss dec hex filename 11737 6000 64 17801 4589 drivers/media/i2c/ov2640.o After: text data bss dec hex filename 11582 6096 64 17742 454e drivers/media/i2c/ov2640.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04[media] i2c: Improve a size determinationMarkus Elfring
Replace the specification of a data structure by pointer dereferences as the parameter for the operator "sizeof" to make size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: merged similar patches] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04[media] i2c: Delete an error messages for failed memory allocationMarkus Elfring
Omit extra messages for memory allocation failures. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: merged similar patches] Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04[media] ov2640: Check the return value from clk_prepare_enable()Fabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-10-04[media] ov2640: Propagate the real error on devm_clk_get() failureFabio Estevam
devm_clk_get() may return different error codes other than -EPROBE_DEFER, so it is better to return the real error code instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-04-25[media] ov2640: print error if devm_*_optional*() failsMauro Carvalho Chehab
devm_gpiod_get_optional() can return -ENOSYS if GPIOLIB is disabled, causing probe to fail. Warn the user if this happens. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and ↵Frank Schaefer
MEDIA_BUS_FMT_VYUY8_2X8 Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: fix vflip controlFrank Schaefer
Enabling vflip currently causes wrong colors. It seems that (at least with the current sensor setup) REG04_VFLIP_IMG only changes the vertical readout direction. Because pixels are arranged RGRG... in odd lines and GBGB... in even lines, either a one line shift or even/odd line swap is required, too, but apparently this doesn't happen. I finally figured out that this can be done manually by setting REG04_VREF_EN. Looking at hflip, it turns out that bit REG04_HREF_EN is set there permanetly, but according to my tests has no effect on the pixel readout order. So my conclusion is that the current documentation of sensor register 0x04 is wrong (has changed after preliminary datasheet version 2.2). I'm pretty sure that automatic vertical line shift/switch can be enabled, too, but until anyone finds ot how this works, we have to stick with manual switching. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: fix duplicate width+height returning from ov2640_select_win()Frank Schaefer
ov2640_select_win() returns height and width values as part of struct ov2640_win_size, so there is no point in modifying the passed height and width parameters, too. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: add missing write to size change preambleFrank Schaefer
HSIZE and VSIZE bits 0 to 2 and HSIZE bit 11 are encoded in DSP register SIZEL. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: add information about DSP register 0xc7Frank Schaefer
According to ov2640 software application notes, there are two Automatic White Balance (AWB) modes, which are selected by DSP register 0xc7: 1) Simple AWB: assumes the average color is gray + independent from lens - doesn't work well if captured area contains unbalanced colors (e.g. large blue background) 2) Advanced AWB: uses color temperature information + more accurate, works with all image contents - lens specific, requires calibration Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: improve banding filter register definitions/documentationFrank Schaefer
- add missing initialisation of sensor register COM25 (2 MSBs of banding filter AEC values) - add macros for setting the banding filter AEC values - add definitions for sensor register 0x5a, which is documented in Omnivisions software application notes Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: fix init sequence alignmentFrank Schaefer
While we are at it, remove a misleading comment (copy/paste mistake) Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-19[media] ov2640: make GPIOLIB an optional dependencyMauro Carvalho Chehab
As warned by kbuild test robot: warning: (VIDEO_EM28XX_V4L2) selects VIDEO_OV2640 which has unmet direct dependencies (MEDIA_SUPPORT && VIDEO_V4L2 && I2C && GPIOLIB && MEDIA_CAMERA_SUPPORT) The em28xx driver can use ov2640, but it doesn't depend (or use) the GPIOLIB in order to power off/on the sensor. So, as we want to allow both usages with and without GPIOLIB, make its dependency optional. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-14[media] ov2640: avoid calling ov2640_select_win() twiceHans Verkuil
Simplify ov2640_set_params and ov2640_set_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ov2640: add MC supportHans Verkuil
The MC support is needed by the em28xx driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ov2640: use standard clk and enable itHans Verkuil
Convert v4l2_clk to normal clk and enable the clock. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] ov2640: convert from soc-camera to a standard subdev sensor driverHans Verkuil
Convert ov2640 to a standard subdev driver. The soc-camera driver no longer uses this driver, so it can safely be converted. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 10:09:25 +0000