summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends/si2168.c
AgeCommit message (Collapse)Author
2014-09-02[media] si2168: add ts_mode setting and move to si2168_initOlli Salonen
Luis Alves submitted a TS mode patch to si2168 earlier, but the patch was rejected due to a small issue. Here is a working version. Also, setting of TS mode is moved from si2168_set_frontend to si2168_init. This patch adds the TS mode as a config option for the si2168 demod: - ts_mode added to config struct. - Possible (interesting) values are * Parallel mode = 0x06 * Serial mode = 0x03 Currently the modules using this demod only use parallel mode. Patches for these modules later in this patch series. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-02[media] si2168: clean loggingOlli Salonen
Same thing for si2168 as Antti did earlier for tda18212: There is no need to print module name nor function name as those are done by kernel logging system when dev_xxx logging is used and driver is proper I2C driver. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-22[media] si2168: Fix a badly solved merge conflictMauro Carvalho Chehab
changeset a733291d6934 didn't merge the fixes well. It ended by restoring some bad logic removed there. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-22Merge commit '67dd8f35c2d8ed80f26c9654b474cffc11c6674d' into patchworkMauro Carvalho Chehab
* .: (268 commits) Linux 3.16-rc6 um: segv: Save regs only in case of a kernel mode fault um: Fix hung task in fix_range_common() um: Ensure that a stub page cannot get unmapped Revert "um: Fix wait_stub_done() error handling" btrfs: test for valid bdev before kobj removal in btrfs_rm_device Btrfs: fix abnormal long waiting in fsync random: check for increase of entropy_count because of signed conversion ARM: EXYNOS: Fix core ID used by platsmp and hotplug code ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode) ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock irqchip: gic: Fix core ID calculation when topology is read from DT GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes GFS2: memcontrol: Spelling s/invlidate/invalidate/ GFS2: Allow caching of glocks for flock GFS2: Allow flocks to use normal glock dq rather than dq_wait GFS2: replace count*size kzalloc by kcalloc GFS2: Use GFP_NOFS when allocating glocks ... Conflicts: drivers/media/dvb-frontends/si2168.c drivers/media/dvb-frontends/si2168_priv.h drivers/media/tuners/si2157.c
2014-07-21[media] si2168: Support Si2168-A20 firmware downloadingLuis Alves
This adds support for the Si2168-A20 firmware download. Extracting the firmware: wget http://www.tbsdtv.com/download/document/tbs6281/tbs6281-t2-t-driver_v1.0.0.6.zip unzip tbs6281-t2-t-driver_v1.0.0.6.zip dd if=tbs-6281_x64/tbs6281_64.sys of=dvb-demod-si2168-a20-01.fw count=28656 bs=1 skip=1625088 md5sum: 32e06713b33915f674bfb2c209beaea5 /lib/firmware/dvb-demod-si2168-a20-01.fw Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-21[media] si2168: Remove testing for demod presence on probeLuis Alves
Testing demod presence on probe fails if the demod was sleep mode. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-21[media] si2168: Fix i2c_add_mux_adapter return valueLuis Alves
In case of failure the return value was always 0. Return proper error code (ENODEV) instead. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-21[media] si2168: improve scanning performanceOlli Salonen
Improve scanning performance by setting property 0301 with a value from Windows driver. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-21[media] si2168: Set symbol rate for DVB-CLuis Alves
This patch adds symbol rate setting to the driver. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: few firmware download changesAntti Palosaari
Rework firmware selection logic a little bit. Print notice asking user update firmware when old Si2168 B40 firmware is used. Signed-off-by: Antti Palosaari <crope@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: advertise Si2168 A30 firmwareAntti Palosaari
Driver uses that new firmware too, so advertise it. Signed-off-by: Antti Palosaari <crope@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: Add support for chip revision Si2168 A30Olli Salonen
Add handling for different chip revisions and firmwares. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: receive 4 bytes reply from cmd 0x14Antti Palosaari
Command 0x14 returns 4 bytes as a reply. It is used for setting key/value pairs to firmware and it returns 4 bytes back including old value. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: do not set values which are already on defaultAntti Palosaari
No need to set explicitly value that are already defaulted same. Setting new value returns old value. Firmware default values can be found just looking returned value. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: remove duplicate commandAntti Palosaari
Same command was executed twice, but different value. Remove redundant command. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: implement CNR statisticAntti Palosaari
Implement CNR statistic. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: set cmd args using memcpyAntti Palosaari
Use memcpy for set cmd buffer in order to keep style in line with rest of file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-14[media] si2168: implement sleepAntti Palosaari
Implement sleep for power-management. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19[media] si2168: firmware download fixAntti Palosaari
First 8 bytes belonging to firmware image were hard-coded and uploaded by the driver mistakenly. Introduce new corrected firmware file and remove those 8 bytes from the driver. New firmware image could be extracted from the PCTV 292e driver CD using following command: $ dd if=/TVC 6.4.8/Driver/PCTV Empia/emOEM.sys ibs=1 skip=1089408 count=2728 of=dvb-demod-si2168-02.fw $ md5sum dvb-demod-si2168-02.fw d8da7ff67cd56cd8aa4e101aea45e052 dvb-demod-si2168-02.fw $ sudo cp dvb-demod-si2168-02.fw /lib/firmware/ Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-19[media] si2168: add one missing parenthesisAntti Palosaari
Fix following warnings: si2168_cmd_execute() warn: add some parenthesis here? si2168_cmd_execute() warn: maybe use && instead of & Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-23[media] si2168: relax demod lock checks a littleAntti Palosaari
bit3 was not cleared always leaving driver reporting demod is not fully locked. Do not check bit0 as it seems to be always 0. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-23[media] si2168: add copyright and licenseAntti Palosaari
Add copyright and license for each file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-23[media] si2168: add support for DVB-C (annex A version)Antti Palosaari
Add support for DVB-C (annex A version). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-23[media] si2168: add support for DVB-T2Antti Palosaari
Add support for DVB-T2. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-23[media] si2168: Silicon Labs Si2168 DVB-T/T2/C demod driverAntti Palosaari
Silicon Labs Si2168 DVB-T/T2/C demod driver. That driver version supports only DVB-T. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 22:31:58 +0000