| Age | Commit message (Collapse) | Author |
|---|
|
Remove needless branching and indentation. Leaves code to catch
malformed op_is_zone_mgmt bios (they shouldn't have a payload).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fold __clone_and_map_data_bio into its only caller.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Rename __split_and_process_bio to dm_split_and_process_bio.
Rename __split_and_process_non_flush to __split_and_process_bio.
Also fix a stale comment and whitespace.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Improves alignment and groups related members relative to cachelines.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There is no need for dm_io_dec_pending() to copy dm_io fields
anymore now that DM provides its own pending_io counters again.
The race documented in commit d208b89401e0 ("dm: fix mempool NULL
pointer race when completing IO") no longer exists now that block
core's in_flight counters aren't used to signal all dm_io is
complete.
Also, rename {start,end}_io_acct to dm_{start,end}_io_acct.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm_stats_account_io()'s STAT_PRECISE_TIMESTAMPS support doesn't handle
the fact that with commit b879f915bc48 ("dm: properly fix redundant
bio-based IO accounting") io->start_time _may_ be in the past (meaning
the start_io_acct() was deferred until later).
Add a new dm_stats_recalc_precise_timestamps() helper that will
set/clear a new 'precise_timestamps' flag in the dm_stats struct based
on whether any configured stats enable STAT_PRECISE_TIMESTAMPS.
And update DM core's alloc_io() to use dm_stats_record_start() to set
stats_aux.duration_ns if stats->precise_timestamps is true.
Also, remove unused 'last_sector' and 'last_rw' members from the
dm_stats struct.
Fixes: b879f915bc48 ("dm: properly fix redundant bio-based IO accounting")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
DM handles a flush with data by first issuing an empty flush and then
once it completes the REQ_PREFLUSH flag is removed and the payload is
issued. The problem fixed by this commit is that both the empty flush
bio and the data payload will account the full extent of the data
payload.
Fix this by factoring out dm_io_acct() and having it wrap all IO
accounting to set the size of bio with REQ_PREFLUSH to 0, account the
IO, and then restore the original size.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Commit d208b89401e0 ("dm: fix mempool NULL pointer race when
completing IO") didn't go far enough.
When bio_end_io_acct ends the count of in-flight I/Os may reach zero
and the DM device may be suspended. There is a possibility that the
suspend races with dm_stats_account_io.
Fix this by adding percpu "pending_io" counters to track outstanding
dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also,
rename md_in_flight_bios() to dm_in_flight_bios() and update it to
iterate all pending_io counters.
Fixes: d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb803 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold dm_dispatch_clone_request into it's only caller, and use a switch
statement to single dispatch for the handling of the different return
values from blk_insert_cloned_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both ->start_time_ns and the RQF_IO_STAT are set when the request is
allocated using blk_mq_alloc_request by dm-mpath in blk_mq_rq_ctx_init.
The block layer also ensures ->start_time_ns is only set when actually
needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The request must be submitted to the queue it was allocated for, so
remove the extra request_queue argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The code to stack blk-mq drivers is only used by dm-multipath, and
will preferably stay that way. Make it optional and only selected
by device mapper, so that the buildbots more easily catch abuses
like the one that slipped in in the ufs driver in the last merged
window. Another positive side effects is that kernel builds without
device mapper shrink a little bit as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220215100540.3892965-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass a block_device to bio_clone_fast and __bio_clone_fast and give
the functions more suitable names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All callers of __bio_clone_fast initialize the bio first. Move that
initialization into __bio_clone_fast instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace open coded bio_clone_fast implementations with the actual helper.
Note that the bio allocated as part of the dm_io structure in alloc_io
will only actually be used later in alloc_tio, making this earlier
cloning of the information safe.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__bio_clone_fast should also clone integrity and crypto data, as a clone
without those is incomplete. Right now the only caller that can actually
support crypto and integrity data (dm) does it manually for the one
callchain that supports these, but we better do it properly in the core.
Note that all callers except for the above mentioned one also don't need
to handle failure at all, given that the integrity and crypto clones are
based on mempool allocations that won't fail for sleeping allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold __remap_to_origin_clear_discard into the two callers to prepare
for bio cloning refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most targets just need a single flush bio. Open code that case in
__send_duplicate_bios without the need to add the bio to a list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Return the clone bio embedded into the tio as that is what the callers
actually want. Similar for the free side.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This simplifies the callers a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the call to __bio_clone_fast and the assignment of ->len_ptr from
the callers into alloc_tio to prepare for changes to the bio clone API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold __send_duplicate_bios into its only caller to prepare for
refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fold clone_bio into its only caller to prepare for refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to stop open coding the container_of operations to get
from the clone bio to the tio structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220202160109.108149-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Leon reported NULL pointer deref with nowait support:
[ 15.123761] device-mapper: raid: Loading target version 1.15.1
[ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1
[ 15.124192] device-mapper: raid: Choosing default region size of 4MiB
[ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060
[ 15.129530] #PF: supervisor write access in kernel mode
[ 15.129533] #PF: error_code(0x0002) - not-present page
[ 15.129535] PGD 0 P4D 0
[ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e
[ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021
[ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20
[ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \
00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \
31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00
[ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202
[ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000
[ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d
[ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000
[ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070
[ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001
[ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000
[ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0
[ 15.129580] Call Trace:
[ 15.129582] <TASK>
[ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531]
[ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63]
[ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129663] __x64_sys_ioctl+0x8e/0xd0
[ 15.129667] do_syscall_64+0x5c/0x90
[ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50
[ 15.129675] ? do_syscall_64+0x69/0x90
[ 15.129677] ? do_syscall_64+0x69/0x90
[ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50
[ 15.129682] ? do_syscall_64+0x69/0x90
[ 15.129684] ? do_syscall_64+0x69/0x90
[ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 15.129689] RIP: 0033:0x7fa96ecd559b
[ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \
c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \
ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48
[ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b
[ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003
[ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27
[ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610
[ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530
[ 15.129709] </TASK>
This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT
Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check.
Fixes: f51d46d0e7cb ("md: add support for REQ_NOWAIT")
Reported-by: Leon Möller <jkhsjdhjs@totally.rip>
Tested-by: Leon Möller <jkhsjdhjs@totally.rip>
Cc: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Pass the block_device that we plan to use this bio for and the
operation to bio_reset to optimize the assigment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass the block_device that we plan to use this bio for and the
operation to bio_init to optimize the assignment. A NULL block_device
can be passed, both for the passthrough case on a raw request_queue and
to temporarily avoid refactoring some nasty code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass the block_device and operation that we plan to use this bio for to
bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both
for the passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use blkdev_issue_flush, which uses an on-stack bio instead of an
opencoded version with a bio embedded into struct pool.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use blkdev_issue_flush, which uses an on-stack bio instead of an
opencoded version with a bio embedded into struct dm_snapshot.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just open code it next to the bio allocations, which saves a few lines
of code, prepares for future changes and allows to remove the duplicate
bi_opf assignment for the bio_clone_fast case in kcryptd_io_read.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove handling of NULL returns from sleeping bio_alloc calls given that
those can't fail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124091107.642561-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Record the start_time for a bio but defer the starting block core's IO
accounting until after IO is submitted using bio_start_io_acct_time().
This approach avoids the need to mess around with any of the
individual IO stats in response to a bio_split() that follows bio
submission.
Reported-by: Bud Brown <bubrown@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Depends-on: e45c47d1f94e ("block: add bio_start_io_acct_time() to control start_time")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-4-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reverts a1e1cb72d9649 ("dm: fix redundant IO accounting for bios that
need splitting") because it was too narrow in scope (only addressed
redundant 'sectors[]' accounting and not ios, nsecs[], etc).
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-3-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the bcache sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: linux-bcache@vger.kernel.org
Acked-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220106100004.3277439-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax and libnvdimm updates from Dan Williams:
"The bulk of this is a rework of the dax_operations API after
discovering the obstacles it posed to the work-in-progress DAX+reflink
support for XFS and other copy-on-write filesystem mechanics.
Primarily the need to plumb a block_device through the API to handle
partition offsets was a sticking point and Christoph untangled that
dependency in addition to other cleanups to make landing the
DAX+reflink support easier.
The DAX_PMEM_COMPAT option has been around for 4 years and not only
are distributions shipping userspace that understand the current
configuration API, but some are not even bothering to turn this option
on anymore, so it seems a good time to remove it per the deprecation
schedule. Recall that this was added after the device-dax subsystem
moved from /sys/class/dax to /sys/bus/dax for its sysfs organization.
All recent functionality depends on /sys/bus/dax.
Some other miscellaneous cleanups and reflink prep patches are
included as well.
Summary:
- Simplify the dax_operations API:
- Eliminate bdev_dax_pgoff() in favor of the filesystem
maintaining and applying a partition offset to all its DAX iomap
operations.
- Remove wrappers and device-mapper stacked callbacks for
->copy_from_iter() and ->copy_to_iter() in favor of moving
block_device relative offset responsibility to the
dax_direct_access() caller.
- Remove the need for an @bdev in filesystem-DAX infrastructure
- Remove unused uio helpers copy_from_iter_flushcache() and
copy_mc_to_iter() as only the non-check_copy_size() versions are
used for DAX.
- Prepare XFS for the pending (next merge window) DAX+reflink support
- Remove deprecated DEV_DAX_PMEM_COMPAT support
- Cleanup a straggling misuse of the GUID api"
* tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits)
iomap: Fix error handling in iomap_zero_iter()
ACPI: NFIT: Import GUID before use
dax: remove the copy_from_iter and copy_to_iter methods
dax: remove the DAXDEV_F_SYNC flag
dax: simplify dax_synchronous and set_dax_synchronous
uio: remove copy_from_iter_flushcache() and copy_mc_to_iter()
iomap: turn the byte variable in iomap_zero_iter into a ssize_t
memremap: remove support for external pgmap refcounts
fsdax: don't require CONFIG_BLOCK
iomap: build the block based code conditionally
dax: fix up some of the block device related ifdefs
fsdax: shift partition offset handling into the file systems
dax: return the partition offset from fs_dax_get_by_bdev
iomap: add a IOMAP_DAX flag
xfs: pass the mapping flags to xfs_bmbt_to_iomap
xfs: use xfs_direct_write_iomap_ops for DAX zeroing
xfs: move dax device handling into xfs_{alloc,free}_buftarg
ext4: cleanup the dax handling in ext4_fill_super
ext2: cleanup the dax handling in ext2_fill_super
fsdax: decouple zeroing from the iomap buffered I/O code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fixes and improvements to dm btree and dm space map code in
persistent-data library used by thinp and cache.
- Update DM integrity to use struct_group() to zero struct
journal_sector.
- Update DM sysfs to use default_groups in kobj_type.
* tag 'for-5.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm sysfs: use default_groups in kobj_type
dm integrity: Use struct_group() to zero struct journal_sector
dm space map common: add bounds check to sm_ll_lookup_bitmap()
dm btree: add a defensive bounds check to insert_at()
dm btree remove: change a bunch of BUG_ON() calls to proper errors
dm btree spine: eliminate duplicate le32_to_cpu() in node_check()
dm btree spine: remove extra node_check function declaration
|
|
Pull block driver updates from Jens Axboe:
- mtip32xx pci cleanups (Bjorn)
- mtip32xx conversion to generic power management (Vaibhav)
- rsxx pci powermanagement cleanups (Bjorn)
- Remove the rsxx driver. This hardware never saw much adoption, and
it's been end of lifed for a while. (Christoph)
- MD pull request from Song:
- REQ_NOWAIT support (Vishal Verma)
- raid6 benchmark optimization (Dirk Müller)
- Fix for acct bioset (Xiao Ni)
- Clean up max_queued_requests (Mariusz Tkaczyk)
- PREEMPT_RT optimization (Davidlohr Bueso)
- Use default_groups in kobj_type (Greg Kroah-Hartman)
- Use attribute groups in pktcdvd and rnbd (Greg)
- NVMe pull request from Christoph:
- increment request genctr on completion (Keith Busch, Geliang
Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)
- Use struct_group() in drbd (Kees)
- null_blk fixes (Ming)
- Get rid of congestion logic in pktcdvd (Neil)
- Floppy ejection hang fix (Tasos)
- Floppy max user request size fix (Xiongwei)
- Loop locking fix (Tetsuo)
* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
block/rnbd-clt-sysfs: use default_groups in kobj_type
pktcdvd: convert to use attribute groups
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
block: remove the rsxx driver
rsxx: Drop PCI legacy power management
...
|
|
Pull block updates from Jens Axboe:
- Unify where the struct request handling code is located in the blk-mq
code (Christoph)
- Header cleanups (Christoph)
- Clean up the io_context handling code (Christoph, me)
- Get rid of ->rq_disk in struct request (Christoph)
- Error handling fix for add_disk() (Christoph)
- request allocation cleanusp (Christoph)
- Documentation updates (Eric, Matthew)
- Remove trivial crypto unregister helper (Eric)
- Reduce shared tag overhead (John)
- Reduce poll_stats memory overhead (me)
- Known indirect function call for dio (me)
- Use atomic references for struct request (me)
- Support request list issue for block and NVMe (me)
- Improve queue dispatch pinning (Ming)
- Improve the direct list issue code (Keith)
- BFQ improvements (Jan)
- Direct completion helper and use it in mmc block (Sebastian)
- Use raw spinlock for the blktrace code (Wander)
- fsync error handling fix (Ye)
- Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me)
* tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits)
MAINTAINERS: add entries for block layer documentation
docs: block: remove queue-sysfs.rst
docs: sysfs-block: document virt_boundary_mask
docs: sysfs-block: document stable_writes
docs: sysfs-block: fill in missing documentation from queue-sysfs.rst
docs: sysfs-block: add contact for nomerges
docs: sysfs-block: sort alphabetically
docs: sysfs-block: move to stable directory
block: don't protect submit_bio_checks by q_usage_counter
block: fix old-style declaration
nvme-pci: fix queue_rqs list splitting
block: introduce rq_list_move
block: introduce rq_list_for_each_safe macro
block: move rq_list macros to blk-mq.h
block: drop needless assignment in set_task_ioprio()
block: remove unnecessary trailing '\'
bio.h: fix kernel-doc warnings
block: check minor range in device_add_disk()
block: use "unsigned long" for blk_validate_block_size().
block: fix error unwinding in device_add_disk
...
|
|
Pull block fix from Jens Axboe:
"Just the md bitmap regression this time"
* tag 'block-5.16-2022-01-07' of git://git.kernel.dk/linux-block:
md/raid1: fix missing bitmap update w/o WriteMostly devices
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the md rdev sysfs code to use default_groups field which
has been the preferred way since commit aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Song Liu <song@kernel.org>
|
|
bioset acct is only needed for raid0 and raid5. Therefore, md_run only
allocates it for raid0 and raid5. However, this does not cover
personality takeover, which may cause uninitialized bioset. For example,
the following repro steps:
mdadm -CR /dev/md0 -l1 -n2 /dev/loop0 /dev/loop1
mdadm --wait /dev/md0
mkfs.xfs /dev/md0
mdadm /dev/md0 --grow -l5
mount /dev/md0 /mnt
causes panic like:
[ 225.933939] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 225.934903] #PF: supervisor instruction fetch in kernel mode
[ 225.935639] #PF: error_code(0x0010) - not-present page
[ 225.936361] PGD 0 P4D 0
[ 225.936677] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
[ 225.937525] CPU: 27 PID: 1133 Comm: mount Not tainted 5.16.0-rc3+ #706
[ 225.938416] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.module_el8.4.0+547+a85d02ba 04/01/2014
[ 225.939922] RIP: 0010:0x0
[ 225.940289] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 225.941196] RSP: 0018:ffff88815897eff0 EFLAGS: 00010246
[ 225.941897] RAX: 0000000000000000 RBX: 0000000000092800 RCX: ffffffff81370a39
[ 225.942813] RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000092800
[ 225.943772] RBP: 1ffff1102b12fe04 R08: fffffbfff0b43c01 R09: fffffbfff0b43c01
[ 225.944807] R10: ffffffff85a1e007 R11: fffffbfff0b43c00 R12: ffff88810eaaaf58
[ 225.945757] R13: 0000000000000000 R14: ffff88810eaaafb8 R15: ffff88815897f040
[ 225.946709] FS: 00007ff3f2505080(0000) GS:ffff888fb5e00000(0000) knlGS:0000000000000000
[ 225.947814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 225.948556] CR2: ffffffffffffffd6 CR3: 000000015aa5a006 CR4: 0000000000370ee0
[ 225.949537] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 225.950455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 225.951414] Call Trace:
[ 225.951787] <TASK>
[ 225.952120] mempool_alloc+0xe5/0x250
[ 225.952625] ? mempool_resize+0x370/0x370
[ 225.953187] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 225.953862] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 225.954464] ? sched_clock_cpu+0x15/0x120
[ 225.955019] ? find_held_lock+0xac/0xd0
[ 225.955564] bio_alloc_bioset+0x1ed/0x2a0
[ 225.956080] ? lock_downgrade+0x3a0/0x3a0
[ 225.956644] ? bvec_alloc+0xc0/0xc0
[ 225.957135] bio_clone_fast+0x19/0x80
[ 225.957651] raid5_make_request+0x1370/0x1b70
[ 225.958286] ? sched_clock_cpu+0x15/0x120
[ 225.958797] ? __lock_acquire+0x8b2/0x3510
[ 225.959339] ? raid5_get_active_stripe+0xce0/0xce0
[ 225.959986] ? lock_is_held_type+0xd8/0x130
[ 225.960528] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 225.961135] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 225.961703] ? sched_clock_cpu+0x15/0x120
[ 225.962232] ? lock_release+0x27a/0x6c0
[ 225.962746] ? do_wait_intr_irq+0x130/0x130
[ 225.963302] ? lock_downgrade+0x3a0/0x3a0
[ 225.963815] ? lock_release+0x6c0/0x6c0
[ 225.964348] md_handle_request+0x342/0x530
[ 225.964888] ? set_in_sync+0x170/0x170
[ 225.965397] ? blk_queue_split+0x133/0x150
[ 225.965988] ? __blk_queue_split+0x8b0/0x8b0
[ 225.966524] ? submit_bio_checks+0x3b2/0x9d0
[ 225.967069] md_submit_bio+0x127/0x1c0
[...]
Fix this by moving alloc/free of acct bioset to pers->run and pers->free.
While we are on this, properly handle md_integrity_register() error in
raid0_run().
Fixes: daee2024715d (md: check level before create and exit io_acct_set)
Cc: stable@vger.kernel.org
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Use the possessive "its" instead of the contraction "it's"
in printed messages.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Song Liu <song@kernel.org>
|
|
Returns EAGAIN in case the raid456 driver would block waiting for reshape.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
This adds nowait support to the RAID10 driver. Very similar to
raid1 driver changes. It makes RAID10 driver return with EAGAIN
for situations where it could wait for eg:
- Waiting for the barrier,
- Reshape operation,
- Discard operation.
wait_barrier() and regular_request_wait() fn are modified to return bool
to support error for wait barriers. They returns true in case of wait
or if wait is not required and returns false if wait was required
but not performed to support nowait.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
This adds nowait support to the RAID1 driver. It makes RAID1 driver
return with EAGAIN for situations where it could wait for eg:
- Waiting for the barrier,
wait_barrier() fn is modified to return bool to support error for
wait barriers. It returns true in case of wait or if wait is not
required and returns false if wait was required but not performed
to support nowait.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
commit 021a24460dc2 ("block: add QUEUE_FLAG_NOWAIT") added support
for checking whether a given bdev supports handling of REQ_NOWAIT or not.
Since then commit 6abc49468eea ("dm: add support for REQ_NOWAIT and enable
it for linear target") added support for REQ_NOWAIT for dm. This uses
a similar approach to incorporate REQ_NOWAIT for md based bios.
This patch was tested using t/io_uring tool within FIO. A nvme drive
was partitioned into 2 partitions and a simple raid 0 configuration
/dev/md0 was created.
md0 : active raid0 nvme4n1p1[1] nvme4n1p2[0]
937423872 blocks super 1.2 512k chunks
Before patch:
$ ./t/io_uring /dev/md0 -p 0 -a 0 -d 1 -r 100
Running top while the above runs:
$ ps -eL | grep $(pidof io_uring)
38396 38396 pts/2 00:00:00 io_uring
38396 38397 pts/2 00:00:15 io_uring
38396 38398 pts/2 00:00:13 iou-wrk-38397
We can see iou-wrk-38397 io worker thread created which gets created
when io_uring sees that the underlying device (/dev/md0 in this case)
doesn't support nowait.
After patch:
$ ./t/io_uring /dev/md0 -p 0 -a 0 -d 1 -r 100
Running top while the above runs:
$ ps -eL | grep $(pidof io_uring)
38341 38341 pts/2 00:10:22 io_uring
38341 38342 pts/2 00:10:37 io_uring
After running this patch, we don't see any io worker thread
being created which indicated that io_uring saw that the
underlying device does support nowait. This is the exact behaviour
noticed on a dm device which also supports nowait.
For all the other raid personalities except raid0, we would need
to train pieces which involves make_request fn in order for them
to correctly handle REQ_NOWAIT.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
|
