| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 61e06e2c3ebd986050958513bfa40dceed756f8f ]
The raid set size is being revalidated unconditionally before a
reshaping conversion is started. MD requires the size to only be
reduced in case of a stripe removing (i.e. shrinking) reshape but not
when growing because the raid array has to stay small until after the
growing reshape finishes.
Fix by avoiding the size revalidation in preresume unless a shrinking
reshape is requested.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8c5c147339d2e201108169327b1f99aa6d57d2cd upstream.
After v4.12 commit e2460f2a4bc7 ("dm: mark targets that pass integrity
data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support
block integrity any more. So add it to the whitelist.
This is also a pre-requisite to use block integrity with other dm layer(s)
on top of multipath, such as kpartx partitions (dm-linear) or LVM.
Also, bump target version to reflect this fix.
Fixes: e2460f2a4bc7 ("dm: mark targets that pass integrity data")
Cc: <stable@vger.kernel.org> #4.12+
Bisected-by: Fedor Loshakov <loshakov@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86755b7a96faed57f910f9e6b8061e019ac1ec08 upstream.
This can happen e.g. during disk cloning.
This is an incomplete fix: it does not catch duplicate UUIDs earlier
when things are still unattached. It does not unregister the device.
Further changes to cope better with this are planned but conflict with
Coly's ongoing improvements to handling device errors. In the meantime,
one can manually stop the device after this has happened.
Attempts to attach a duplicate device result in:
[ 136.372404] loop: module loaded
[ 136.424461] bcache: register_bdev() registered backing device loop0
[ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached
My test procedure is:
dd if=/dev/sdb1 of=imgfile bs=1024 count=262144
losetup -f imgfile
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc40daf91bdddbba72a4a8cd0860640e06668309 upstream.
Kernel crashed when register a duplicate cache device, the call trace is
bellow:
[ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G
W OE 4.15.5-amd64-preempt-sysrq-20171018 #2
[ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS
N1DET41W (1.15 ) 12/31/2015
[ 417.643870] RIP: 0010:bdevname+0x13/0x1e
[ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282
[ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8
c7edf
[ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000
00000
[ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000
1850e
[ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000
00000
[ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d
90000
[ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS:
0000000000000000
[ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003
606e0
[ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000
00000
[ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000
00400
[ 417.643946] Call Trace:
[ 417.643978] register_bcache+0x1117/0x1270 [bcache]
[ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c
[ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a
[ 417.644013] ? kernfs_fop_write+0xf6/0x138
[ 417.644020] kernfs_fop_write+0xf6/0x138
[ 417.644031] __vfs_write+0x31/0xcc
[ 417.644043] ? current_kernel_time64+0x10/0x36
[ 417.644115] ? __audit_syscall_entry+0xbf/0xe3
[ 417.644124] vfs_write+0xa5/0xe2
[ 417.644133] SyS_write+0x5c/0x9f
[ 417.644144] do_syscall_64+0x72/0x81
[ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 417.644169] RIP: 0033:0x7fde7e1c1974
[ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000
000000001
[ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c
1974
[ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000
0001
[ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000
0077
[ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000
0001
[ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000
0000
[ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0
0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8
b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39
[ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38
[ 417.644306] CR2: 0000000000000314
When registering duplicate cache device in register_cache(), after failure
on calling register_cache_set(), bch_cache_release() will be called, then
bdev will be freed, so bdevname(bdev, name) caused kernel crash.
Since bch_cache_release() will free bdev, so in this patch we make sure
bdev being freed if register_cache() fail, and do not free bdev again in
register_bcache() when register_cache() fail.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reported-by: Marc MERLIN <marc@merlins.org>
Tested-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 590347e4000356f55eb10b03ced2686bd74dab40 upstream.
gcc-6.3 and earlier show a new warning after a seemingly unrelated
change to the arm64 PAGE_KERNEL definition:
In file included from drivers/md/dm-bufio.c:14:0:
drivers/md/dm-bufio.c: In function 'alloc_buffer':
include/linux/sched/mm.h:182:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized]
current->flags = (current->flags & ~PF_MEMALLOC_NOIO) | flags;
^
The same warning happened earlier on linux-3.18 for MIPS and I did a
workaround for that, but now it's come back.
gcc-7 and newer are apparently smart enough to figure this out, and
other architectures don't show it, so the best I could come up with is
to rework the caller slightly in a way that makes it obvious enough to
all arm64 compilers what is happening here.
Fixes: 41acec624087 ("arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()")
Link: https://patchwork.kernel.org/patch/9692829/
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[snitzer: moved declarations inside conditional, altered vmalloc return]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39772f0a7be3b3dc26c74ea13fe7847fd1522c8b upstream.
The locking protocols in md assume that a device will
never be removed from an array during resync/recovery/reshape.
When that isn't happening, rcu or reconfig_mutex is needed
to protect an rdev pointer while taking a refcount. When
it is happening, that protection isn't needed.
Unfortunately there are cases were remove_and_add_spares() is
called when recovery might be happening: is state_store(),
slot_store() and hot_remove_disk().
In each case, this is just an optimization, to try to expedite
removal from the personality so the device can be removed from
the array. If resync etc is happening, we just have to wait
for md_check_recover to find a suitable time to call
remove_and_add_spares().
This optimization and not essential so it doesn't
matter if it fails.
So change remove_and_add_spares() to abort early if
resync/recovery/reshape is happening, unless it is called
from md_check_recovery() as part of a newly started recovery.
The parameter "this" is only NULL when called from
md_check_recovery() so when it is NULL, there is no need to abort.
As this can result in a NULL dereference, the fix is suitable
for -stable.
cc: yuyufen <yuyufen@huawei.com>
Cc: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Fixes: 8430e7e0af9a ("md: disconnect device from personality before trying to remove it.")
Cc: stable@ver.kernel.org (v4.8+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 18022a1bd3709b74ca31ef0b28fccd52bcd6c504 ]
flush_pending_writes isn't always called with block plug, so add it, and plug
works in nested way.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aff69d89bdebc39235cddb4445371eb979b49685 ]
When disk failure occurs on new disks for reshape, mddev->degraded
is not calculated correctly. Faulty bit of the failure device is not
set before raid5_calc_degraded(conf).
mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012]
mdadm /dev/md0 -a /dev/loop3
mdadm /dev/md0 --grow -n4
mdadm /dev/md0 -f /dev/loop3 # simulating disk failure
cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1.
However, mdadm -D /dev/md0 will show that it is degraded. It's a bug.
It can be fixed by moving the resources raid5_calc_degraded() depends
on before it.
Reported-by: Roy Chung <roychung@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dd601fa8317243be887458c49f6c29c2f3d719f upstream.
dec_pending() is given an error status (possibly 0) to be recorded
against a bio. It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status. However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.
This can happen when chained bios are in use. If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.
This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da84354 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.
A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.
The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.
Reported-and-tested-by: Milan Broz <gmazyland@gmail.com>
Cc: stable@vger.kernel.org (v3.14+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6c4ca1e36cdc1a0a7a84797804b87920ccbebf51 ]
register_shrinker is now __must_check, so check it to kill a warning.
Caller of bch_btree_cache_alloc in super.c appropriately checks return
value so this is fully plumbed through.
This V2 fixes checkpatch warnings and improves the commit description,
as I was too hasty getting the previous version out.
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Vojtech Pavlik <vojtech@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3cc2e57c4beabcbbaa46e1ac6d77ca8276a4a42d upstream.
Fix to return error code -ENOMEM from the mempool_create_kmalloc_pool()
error handling case instead of 0, as done elsewhere in this function.
Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dc94902bde1e158cd19c4deab208e5d6eb382a44 upstream.
Loading key via kernel keyring service erases the internal
key copy immediately after we pass it in crypto layer. This is
wrong because IV is initialized later and we use wrong key
for the initialization (instead of real key there's just zeroed
block).
The bug may cause data corruption if key is loaded via kernel keyring
service first and later same crypt device is reactivated using exactly
same key in hexbyte representation, or vice versa. The bug (and fix)
affects only ciphers using following IVs: essiv, lmk and tcw.
Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27c7003697fc2c78f965984aa224ef26cd6b2949 upstream.
If dm-crypt uses authenticated mode with separate MAC, there are two
concatenated part of the key structure - key(s) for encryption and
authentication key.
Add a missing check for authenticated key length. If this key length is
smaller than actually provided key, dm-crypt now properly fails instead
of crashing.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Reported-by: Salah Coronya <salahx@yahoo.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 717f4b1c52135f279112df82583e0c77e80f90de upstream.
Some asynchronous cipher implementations may use DMA. The stack may
be mapped in the vmalloc area that doesn't support DMA. Therefore,
the cipher request and initialization vector shouldn't be on the
stack.
Fix this by allocating the request and iv with kmalloc.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 490ae017f54e55bde382d45ea24bddfb6d1a0aaf upstream.
For btree removal, there is a corner case that a single thread
could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5)
and leads to deadlock.
A btree removal might eventually call
rebalance_children()->rebalance3() to rebalance entries of three
neighbor child nodes when shadow_spine has already acquired two
write locks. In rebalance3(), it tries to shadow and acquire the
write locks of all three child nodes. However, shadowing a child
node requires acquiring a read lock of the original child node and
a write lock of the new block. Although the read lock will be
released after block shadowing, shadowing the third child node
in rebalance3() could still take the sixth lock.
(2 write locks for shadow_spine +
2 write locks for the first two child nodes's shadow +
1 write lock for the last child node's shadow +
1 read lock for the last child node)
Signed-off-by: Dennis Yang <dennisyang@qnap.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc68d0a43560e950850fc69b58f0f8254b28f6d6 upstream.
When inserting a new key/value pair into a btree we walk down the spine of
btree nodes performing the following 2 operations:
i) space for a new entry
ii) adjusting the first key entry if the new key is lower than any in the node.
If the _root_ node is full, the function btree_split_beneath() allocates 2 new
nodes, and redistibutes the root nodes entries between them. The root node is
left with 2 entries corresponding to the 2 new nodes.
btree_split_beneath() then adjusts the spine to point to one of the two new
children. This means the first key is never adjusted if the new key was lower,
ie. operation (ii) gets missed out. This can result in the new key being
'lost' for a period; until another low valued key is inserted that will uncover
it.
This is a serious bug, and quite hard to make trigger in normal use. A
reproducing test case ("thin create devices-in-reverse-order") is
available as part of the thin-provision-tools project:
https://github.com/jthornber/thin-provisioning-tools/blob/master/functional-tests/device-mapper/dm-tests.scm#L593
Fix the issue by changing btree_split_beneath() so it no longer adjusts
the spine. Instead it unlocks both the new nodes, and lets the main
loop in btree_insert_raw() relock the appropriate one and make any
neccessary adjustments.
Reported-by: Monty Pavel <monty_pavel@sina.com>
Signed-off-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fbc7c07ec23c040179384a1f16b62b6030eb6bdd upstream.
When system is under memory pressure it is observed that dm bufio
shrinker often reclaims only one buffer per scan. This change fixes
the following two issues in dm bufio shrinker that cause this behavior:
1. ((nr_to_scan - freed) <= retain_target) condition is used to
terminate slab scan process. This assumes that nr_to_scan is equal
to the LRU size, which might not be correct because do_shrink_slab()
in vmscan.c calculates nr_to_scan using multiple inputs.
As a result when nr_to_scan is less than retain_target (64) the scan
will terminate after the first iteration, effectively reclaiming one
buffer per scan and making scans very inefficient. This hurts vmscan
performance especially because mutex is acquired/released every time
dm_bufio_shrink_scan() is called.
New implementation uses ((LRU size - freed) <= retain_target)
condition for scan termination. LRU size can be safely determined
inside __scan() because this function is called after dm_bufio_lock().
2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to
determine number of freeable objects in the slab. However dm_bufio
always retains retain_target buffers in its LRU and will terminate
a scan when this mark is reached. Therefore returning the entire LRU size
from dm_bufio_shrink_count() is misleading because that does not
represent the number of freeable objects that slab will reclaim during
a scan. Returning (LRU size - retain_target) better represents the
number of freeable objects in the slab. This way do_shrink_slab()
returns 0 when (LRU size < retain_target) and vmscan will not try to
scan this shrinker avoiding scans that will not reclaim any memory.
Test: tested using Android device running
<AOSP>/system/extras/alloc-stress that generates memory pressure
and causes intensive shrinker scans
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d1d90147c9680aaec4a5757932c2103c42c9c23b ]
Since commit 4ad23a976413 ("MD: use per-cpu counter for writes_pending"),
the wait_queue is only got invoked if THREAD_WAKEUP is not set previously.
With above change, I can see process_metadata_update could always hang on
the wait queue, because mddev->thread could stay on 'D' status and the
THREAD_WAKEUP flag is not cleared since there are lots of place to wake up
mddev->thread. Then deadlock happened as follows:
linux175:~ # ps aux|grep md|grep D
root 20117 0.0 0.0 0 0 ? D 03:45 0:00 [md0_raid1]
root 20125 0.0 0.0 0 0 ? D 03:45 0:00 [md0_cluster_rec]
linux175:~ # cat /proc/20117/stack
[<ffffffffa0635604>] dlm_lock_sync+0x94/0xd0 [md_cluster]
[<ffffffffa0635674>] lock_token+0x34/0xd0 [md_cluster]
[<ffffffffa0635804>] metadata_update_start+0x64/0x110 [md_cluster]
[<ffffffffa04d985b>] md_update_sb.part.58+0x9b/0x860 [md_mod]
[<ffffffffa04da035>] md_update_sb+0x15/0x30 [md_mod]
[<ffffffffa04dc066>] md_check_recovery+0x266/0x490 [md_mod]
[<ffffffffa06450e2>] raid1d+0x42/0x810 [raid1]
[<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod]
[<ffffffff81091741>] kthread+0x101/0x140
linux175:~ # cat /proc/20125/stack
[<ffffffffa0636679>] recv_daemon+0x3f9/0x5c0 [md_cluster]
[<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod]
[<ffffffff81091741>] kthread+0x101/0x140
So let's revert the part of code in the commit to resovle the problem since
we can't get lots of benefits of previous change.
Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending")
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3382290ed2d5e275429cef510ab21889d3ccd164 upstream.
[ Note, this is a Git cherry-pick of the following commit:
506458efaf15 ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()")
... for easier x86 PTI code testing and back-porting. ]
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 385f4d7f946b08f36f68b0a28e95a319925b6b62 ]
The check used here is to avoid conflict between write and
resync, however we used the wrong logic, it should be the
inverse of the checking inside "if".
Fixes: 589a1c4 ("Suspend writes in RAID1 if within range")
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 07719ff767dcd8cc42050f185d332052f3816546 ]
If starting an array that is undergoing rebuild, make ppl recovery honor
the recovery_offset of a member disk and don't read data that is not yet
in-sync.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 235b6003fb28f0dd8e7ed8fbdb088bb548291766 ]
When reshaping a fully degraded raid5/raid6 to a larger
nubmer of devices, the new device(s) are not in-sync
and so that can make the newly grown stripe appear to be
"failed".
To avoid this, we set the R5_Expanded flag to say "Even though
this device is not fully in-sync, this block is safe so
don't treat the device as failed for this stripe".
This flag is set for data devices, not not for parity devices.
Consequently, if you have a RAID6 with two devices that are partly
recovered and a spare, and start a reshape to include the spare,
then when the reshape gets past the point where the recovery was
up to, it will think the stripes are failed and will get into
an infinite loop, failing to make progress.
So when contructing parity on an EXPAND_READY stripe,
set R5_Expanded.
Reported-by: Curt <lightspd@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c157313791a999646901b3e3c6888514ebc36d62 ]
Currently, Cache missed IOs are identified by s->cache_miss, but actually,
there are many situations that missed IOs are not assigned a value for
s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO
(s->iop.bypass = 1), or the cache_bio allocate failed. In these situations,
it will go to out_put or out_submit, and s->cache_miss is null, which leads
bch_mark_cache_accounting() to treat this IO as a hit IO.
[ML: applied by 3-way merge]
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ]
mutex_destroy does nothing most of time, but it's better to call
it to make the code future proof and it also has some meaning
for like mutex debug.
As Coly pointed out in a previous review, bcache_exit() may not be
able to handle all the references properly if userspace registers
cache and backing devices right before bch_debug_init runs and
bch_debug_init failes later. So not exposing userspace interface
until everything is ready to avoid that issue.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
created
commit 7e6358d244e4706fe612a77b9c36519a33600ac0 upstream.
A NULL pointer is seen if two concurrent "vgchange -ay -K <vg name>"
processes race to load the dm-thin-pool module:
PID: 25992 TASK: ffff883cd7d23500 CPU: 4 COMMAND: "vgchange"
#0 [ffff883cd743d600] machine_kexec at ffffffff81038fa9
0000001 [ffff883cd743d660] crash_kexec at ffffffff810c5992
0000002 [ffff883cd743d730] oops_end at ffffffff81515c90
0000003 [ffff883cd743d760] no_context at ffffffff81049f1b
0000004 [ffff883cd743d7b0] __bad_area_nosemaphore at ffffffff8104a1a5
0000005 [ffff883cd743d800] bad_area at ffffffff8104a2ce
0000006 [ffff883cd743d830] __do_page_fault at ffffffff8104aa6f
0000007 [ffff883cd743d950] do_page_fault at ffffffff81517bae
0000008 [ffff883cd743d980] page_fault at ffffffff81514f95
[exception RIP: kmem_cache_alloc+108]
RIP: ffffffff8116ef3c RSP: ffff883cd743da38 RFLAGS: 00010046
RAX: 0000000000000004 RBX: ffffffff81121b90 RCX: ffff881bf1e78cc0
RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000
RBP: ffff883cd743da68 R8: ffff881bf1a4eb00 R9: 0000000080042000
R10: 0000000000002000 R11: 0000000000000000 R12: 00000000000000d0
R13: 0000000000000000 R14: 00000000000000d0 R15: 0000000000000246
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
0000009 [ffff883cd743da70] mempool_alloc_slab at ffffffff81121ba5
0000010 [ffff883cd743da80] mempool_create_node at ffffffff81122083
0000011 [ffff883cd743dad0] mempool_create at ffffffff811220f4
0000012 [ffff883cd743dae0] pool_ctr at ffffffffa08de049 [dm_thin_pool]
0000013 [ffff883cd743dbd0] dm_table_add_target at ffffffffa0005f2f [dm_mod]
0000014 [ffff883cd743dc30] table_load at ffffffffa0008ba9 [dm_mod]
0000015 [ffff883cd743dc90] ctl_ioctl at ffffffffa0009dc4 [dm_mod]
The race results in a NULL pointer because:
Process A (vgchange -ay -K):
a. send DM_LIST_VERSIONS_CMD ioctl;
b. pool_target not registered;
c. modprobe dm_thin_pool and wait until end.
Process B (vgchange -ay -K):
a. send DM_LIST_VERSIONS_CMD ioctl;
b. pool_target registered;
c. table_load->dm_table_add_target->pool_ctr;
d. _new_mapping_cache is NULL and panic.
Note:
1. process A and process B are two concurrent processes.
2. pool_target can be detected by process B but
_new_mapping_cache initialization has not ended.
To fix dm-thin-pool, and other targets (cache, multipath, and snapshot)
with the same problem, simply dm_register_target() after all resources
created during module init (as labelled with __init) are finished.
Signed-off-by: monty <monty_pavel@sina.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0868b99c214a3d55486c700de7c3f770b7243e7c ]
When bitmap is resized, the old kalloced chunks just are not released
once the resized bitmap starts to use new space.
This fixes in particular kmemleak reports like this one:
unreferenced object 0xffff8f4311e9c000 (size 4096):
comm "lvm", pid 19333, jiffies 4295263268 (age 528.265s)
hex dump (first 32 bytes):
02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80 ................
02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80 ................
backtrace:
[<ffffffffa69471ca>] kmemleak_alloc+0x4a/0xa0
[<ffffffffa628c10e>] kmem_cache_alloc_trace+0x14e/0x2e0
[<ffffffffa676cfec>] bitmap_checkpage+0x7c/0x110
[<ffffffffa676d0c5>] bitmap_get_counter+0x45/0xd0
[<ffffffffa676d6b3>] bitmap_set_memory_bits+0x43/0xe0
[<ffffffffa676e41c>] bitmap_init_from_disk+0x23c/0x530
[<ffffffffa676f1ae>] bitmap_load+0xbe/0x160
[<ffffffffc04c47d3>] raid_preresume+0x203/0x2f0 [dm_raid]
[<ffffffffa677762f>] dm_table_resume_targets+0x4f/0xe0
[<ffffffffa6774b52>] dm_resume+0x122/0x140
[<ffffffffa6779b9f>] dev_suspend+0x18f/0x290
[<ffffffffa677a3a7>] ctl_ioctl+0x287/0x560
[<ffffffffa677a693>] dm_ctl_ioctl+0x13/0x20
[<ffffffffa62d6b46>] do_vfs_ioctl+0xa6/0x750
[<ffffffffa62d7269>] SyS_ioctl+0x79/0x90
[<ffffffffa6956d41>] entry_SYSCALL_64_fastpath+0x1f/0xc2
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 233978449074ca7e45d9c959f9ec612d1b852893 ]
Requesting a sync on an active raid device via a table reload
(see 'sync' parameter in Documentation/device-mapper/dm-raid.txt)
skips the super_load() call that defines the superblock size
(rdev->sb_size) -- resulting in an oops if/when super_sync()->memset()
is called.
Fix by moving the initialization of the superblock start and size
out of super_load() to the caller (analyse_superblocks).
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff35f58e8f8eb520367879a0ccc6f2ec4b62b17b upstream.
r5c_journal_mode_set() is called by r5c_journal_mode_store() and
raid_ctr() in dm-raid. We don't need mddev_lock() when calling from
raid_ctr(). This patch fixes this by moves the mddev_lock() to
r5c_journal_mode_store().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 230b55fa8d64007339319539f8f8e68114d08529 upstream.
Having both a bitmap and a journal is pointless.
Attempting to do so can corrupt the bitmap if the journal
replay happens before the bitmap is initialized.
Rather than try to avoid this corruption, simply
refuse to allow arrays with both a bitmap and a journal.
So:
- if raid5_run sees both are present, fail.
- if adding a bitmap finds a journal is present, fail
- if adding a journal finds a bitmap is present, fail.
Signed-off-by: NeilBrown <neilb@suse.com>
Tested-by: Joshua Kinard <kumba@gentoo.org>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e393aa2446150536929140739f09c6ecbcbea7f0 upstream.
When we send a read request and hit the clean data in cache device, there
is a situation called cache read race in bcache(see the commit in the tail
of cache_look_up(), the following explaination just copy from there):
The bucket we're reading from might be reused while our bio is in flight,
and we could then end up reading the wrong data. We guard against this
by checking (in bch_cache_read_endio()) if the pointer is stale again;
if so, we treat it as an error (s->iop.error = -EINTR) and reread from
the backing device (but we don't pass that error up anywhere)
It should be noted that cache read race happened under normal
circumstances, not the circumstance when SSD failed, it was counted
and shown in /sys/fs/bcache/XXX/internal/cache_read_races.
Without this patch, when we use writeback mode, we will never reread from
the backing device when cache read race happened, until the whole cache
device is clean, because the condition
(s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in
cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR)
will be passed up, at last, user will receive -EINTR when it's bio end,
this is not suitable, and wield to up-application.
In this patch, we use s->read_dirty_data to judge whether the read
request hit dirty data in cache device, it is safe to reread data from
the backing device when the read request hit clean data. This can not
only handle cache read race, but also recover data when failed read
request from cache device.
[edited by mlyle to fix up whitespace, commit log title, comment
spelling]
Fixes: d59b23795933 ("bcache: only permit to recovery read error when cache device is clean")
Signed-off-by: Hua Rui <huarui.dev@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d59b23795933678c9638fd20c942d2b4f3cd6185 upstream.
When bcache does read I/Os, for example in writeback or writethrough mode,
if a read request on cache device is failed, bcache will try to recovery
the request by reading from cached device. If the data on cached device is
not synced with cache device, then requester will get a stale data.
For critical storage system like database, providing stale data from
recovery may result an application level data corruption, which is
unacceptible.
With this patch, for a failed read request in writeback or writethrough
mode, recovery a recoverable read request only happens when cache device
is clean. That is to say, all data on cached device is up to update.
For other cache modes in bcache, read request will never hit
cached_dev_read_error(), they don't need this patch.
Please note, because cache mode can be switched arbitrarily in run time, a
writethrough mode might be switched from a writeback mode. Therefore
checking dc->has_data in writethrough mode still makes sense.
Changelog:
V4: Fix parens error pointed by Michael Lyle.
v3: By response from Kent Oversteet, he thinks recovering stale data is a
bug to fix, and option to permit it is unnecessary. So this version
the sysfs file is removed.
v2: rename sysfs entry from allow_stale_data_on_failure to
allow_stale_data_on_failure, and fix the confusing commit log.
v1: initial patch posted.
[small change to patch comment spelling by mlyle]
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Arne Wolf <awolf@lenovo.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: Kai Krakow <hurikhan77@gmail.com>
Cc: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf33c1ee5254c6a430bc1538232b49c3ea13e613 upstream.
This patch try to fix the building error on MIPS. The reason is MIPS
has already defined the PTR macro, which conflicts with the PTR macro
in include/uapi/linux/bcache.h.
[fixed by mlyle: corrected a line-length issue]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f6eca2d43ed694ab8124dd24c88277f7eca93b7d upstream.
If freeze_array is attempted in the middle of close_sync/
wait_all_barriers, deadlock can occur.
freeze_array will wait for nr_pending and nr_queued to line up.
wait_all_barriers increments nr_pending for each barrier bucket, one
at a time, but doesn't actually issue IO that could be counted in
nr_queued. So freeze_array is blocked until wait_all_barriers
completes and allow_all_barriers runs. At the same time, when
_wait_barrier sees array_frozen == 1, it stops and waits for
freeze_array to complete.
Prevent the deadlock by making close_sync call _wait_barrier and
_allow_barrier for one bucket at a time, instead of deferring the
_allow_barrier calls until after all _wait_barriers are complete.
Signed-off-by: Nate Dailey <nate.dailey@stratus.com>
Fix: fd76863e37fe(RAID1: a new I/O barrier implementation to remove resync window)
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 938b533d479e7428b7fa1b8179283646d2e2c53d upstream.
This reverts commit 8031c3ddc70a. That patches doesn't work well if PAGE_SIZE >
4k. We will fix the original problem with a different approach.
Fix: 8031c3ddc70a(md/bitmap: copy correct data for bitmap super)
Reported-by: Joshua Kinard <kumba@gentoo.org>
Suggested-by: Neil Brown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b90f6ff080c52e2f05364210733df120e3c4e597 upstream.
Only MD_SB_CHANGE_PENDING should be used to wait for transition from
clean to dirty. Checking also MD_SB_CHANGE_CLEAN is unnecessary and can
race with e.g. md_do_sync(). This sporadically causes a hang when
changing consistency policy during resync:
INFO: task mdadm:6183 blocked for more than 30 seconds.
Not tainted 4.14.0-rc3+ #391
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mdadm D12752 6183 6022 0x00000000
Call Trace:
__schedule+0x93f/0x990
schedule+0x6b/0x90
md_allow_write+0x100/0x130 [md_mod]
? do_wait_intr_irq+0x90/0x90
resize_stripes+0x3a/0x5b0 [raid456]
? kernfs_fop_write+0xbe/0x180
raid5_change_consistency_policy+0xa6/0x200 [raid456]
consistency_policy_store+0x2e/0x70 [md_mod]
md_attr_store+0x90/0xc0 [md_mod]
sysfs_kf_write+0x42/0x50
kernfs_fop_write+0x119/0x180
__vfs_write+0x28/0x110
? rcu_sync_lockdep_assert+0x12/0x60
? __sb_start_write+0x15a/0x1c0
? vfs_write+0xa3/0x1a0
vfs_write+0xb4/0x1a0
SyS_write+0x49/0xa0
entry_SYSCALL_64_fastpath+0x18/0xad
Fixes: 2214c260c72b ("md: don't return -EAGAIN in md_allow_write for external metadata arrays")
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d47c8ad261f787af22a220ffcc2d07afba809223 upstream.
A recent patch aimed to cause md_write_start() to fail (rather than
block) when the mddev was suspending, so as to avoid deadlocks.
Unfortunately the test in wait_event() was wrong, and it didn't change
behaviour at all.
We wait_event() must wait until the metadata is written OR the array is
suspending.
Fixes: cc27b0c78c79 ("md: fix deadlock between mddev_suspend() and md_write_start()")
Reported-by: Xiao Ni <xni@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 91af8300d9c1d7c6b6a2fd754109e08d4798b8d8 upstream.
In bcache code, sysfs entries are created before all resources get
allocated, e.g. allocation thread of a cache set.
There is posibility for NULL pointer deference if a resource is accessed
but which is not initialized yet. Indeed Jorg Bornschein catches one on
cache set allocation thread and gets a kernel oops.
The reason for this bug is, when bch_bucket_alloc() is called during
cache set registration and attaching, ca->alloc_thread is not properly
allocated and initialized yet, call wake_up_process() on ca->alloc_thread
triggers NULL pointer deference failure. A simple and fast fix is, before
waking up ca->alloc_thread, checking whether it is allocated, and only
wake up ca->alloc_thread when it is not NULL.
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Jorg Bornschein <jb@capsec.org>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a74d29d541cd86569139c6f3f44b2d210458071 upstream.
A DM device with a mix of discard capabilities (due to some underlying
devices not having discard support) _should_ just return -EOPNOTSUPP for
the region of the device that doesn't support discards (even if only by
way of the underlying driver formally not supporting discards). BUT,
that does ask the underlying driver to handle something that it never
advertised support for. In doing so we're exposing users to the
potential for a underlying disk driver hanging if/when a discard is
issued a the device that is incapable and never claimed to support
discards.
Fix this by requiring that each DM target in a DM table provide discard
support as a prereq for a DM device to advertise support for discards.
This may cause some configurations that were happily supporting discards
(even in the face of a mix of discard support) to stop supporting
discards -- but the risk of users hitting driver hangs, and forced
reboots, outweighs supporting those fringe mixed discard
configurations.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9a41d21dceadf8104812626ef85dc56ee8a60ed upstream.
The following BUG_ON was hit when testing repeat creation and removal of
DM devices:
kernel BUG at drivers/md/dm.c:2919!
CPU: 7 PID: 750 Comm: systemd-udevd Not tainted 4.1.44
Call Trace:
[<ffffffff81649e8b>] dm_get_from_kobject+0x34/0x3a
[<ffffffff81650ef1>] dm_attr_show+0x2b/0x5e
[<ffffffff817b46d1>] ? mutex_lock+0x26/0x44
[<ffffffff811df7f5>] sysfs_kf_seq_show+0x83/0xcf
[<ffffffff811de257>] kernfs_seq_show+0x23/0x25
[<ffffffff81199118>] seq_read+0x16f/0x325
[<ffffffff811de994>] kernfs_fop_read+0x3a/0x13f
[<ffffffff8117b625>] __vfs_read+0x26/0x9d
[<ffffffff8130eb59>] ? security_file_permission+0x3c/0x44
[<ffffffff8117bdb8>] ? rw_verify_area+0x83/0xd9
[<ffffffff8117be9d>] vfs_read+0x8f/0xcf
[<ffffffff81193e34>] ? __fdget_pos+0x12/0x41
[<ffffffff8117c686>] SyS_read+0x4b/0x76
[<ffffffff817b606e>] system_call_fastpath+0x12/0x71
The bug can be easily triggered, if an extra delay (e.g. 10ms) is added
between the test of DMF_FREEING & DMF_DELETING and dm_get() in
dm_get_from_kobject().
To fix it, we need to ensure the test of DMF_FREEING & DMF_DELETING and
dm_get() are done in an atomic way, so _minor_lock is used.
The other callers of dm_get() have also been checked to be OK: some
callers invoke dm_get() under _minor_lock, some callers invoke it under
_hash_lock, and dm_start_request() invoke it after increasing
md->open_count.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 856eb0916d181da6d043cc33e03f54d5c5bbe54a upstream.
The structure srcu_struct can be very big, its size is proportional to the
value CONFIG_NR_CPUS. The Fedora kernel has CONFIG_NR_CPUS 8192, the field
io_barrier in the struct mapped_device has 84kB in the debugging kernel
and 50kB in the non-debugging kernel. The large size may result in failure
of the function kzalloc_node.
In order to avoid the allocation failure, we use the function
kvzalloc_node, this function falls back to vmalloc if a large contiguous
chunk of memory is not available. This patch also moves the field
io_barrier to the last position of struct mapped_device - the reason is
that on many processor architectures, short memory offsets result in
smaller code than long memory offsets - on x86-64 it reduces code size by
320 bytes.
Note to stable kernel maintainers - the kernels 4.11 and older don't have
the function kvzalloc_node, you can use the function vzalloc_node instead.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74d4108d9e681dbbe4a2940ed8fdff1f6868184c upstream.
The default max_cache_size_bytes for dm-bufio is meant to be the lesser
of 25% of the size of the vmalloc area and 2% of the size of lowmem.
However, on 32-bit systems the intermediate result in the expression
(VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100
overflows, causing the wrong result to be computed. For example, on a
32-bit system where the vmalloc area is 520093696 bytes, the result is
1174405 rather than the expected 130023424, which makes the maximum
cache size much too small (far less than 2% of lowmem). This causes
severe performance problems for dm-verity users on affected systems.
Fix this by using mult_frac() to correctly multiply by a percentage. Do
this for all places in dm-bufio that multiply by a percentage. Also
replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary
to the comment is now defined in include/linux/vmalloc.h.
Depends-on: 9993bc635 ("sched/x86: Fix overflow in cyc2ns_offset")
Fixes: 95d402f057f2 ("dm: add bufio")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9dc112e2daf87b40607fd8d357e2d7de32290d45 upstream.
It is very normal to see allocation failure, especially with blk-mq
request_queues, so it's unnecessary to report this error and annoy
people.
In practice this 'blk_get_request() returned -11' error gets logged
quite frequently when a blk-mq DM multipath device sees heavy IO.
This change is marked for stable@ because the annoying message in
question was included in stable@ commit 7083abbbf.
Fixes: 7083abbbf ("dm mpath: avoid that path removal can trigger an infinite loop")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 114e025968b5990ad0b57bf60697ea64ee206aac upstream.
The SCSI layer allows ZBC drives to have a smaller last runt zone. For
such a device, specifying the entire capacity for a dm-zoned target
table entry fails because the specified capacity is not aligned on a
device zone size indicated in the request queue structure of the
device.
Fix this problem by ignoring the last runt zone in the entry length
when seting up the dm-zoned target (ctr method) and when iterating table
entries of the target (iterate_devices method). This allows dm-zoned
users to still easily setup a target using the entire device capacity
(as mandated by dm-zoned) or the aligned capacity excluding the last
runt zone.
While at it, replace direct references to the device queue chunk_sectors
limit with calls to the accessor blk_queue_zone_sectors().
Reported-by: Peter Desnoyers <pjd@ccs.neu.edu>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0440d5c0ca9744b92a07aeb6df0a9a75db6f4280 upstream.
When slub_debug is enabled kmalloc returns unaligned memory. XFS uses
this unaligned memory for its buffers (if an unaligned buffer crosses a
page, XFS frees it and allocates a full page instead - see the function
xfs_buf_allocate_memory).
dm-crypt checks if bv_offset is aligned on page size and these checks
fail with slub_debug and XFS.
Fix this bug by removing the bv_offset checks. Switch to checking if
bv_len is aligned instead of bv_offset (this check should be sufficient
to prevent overruns if a bio with too small bv_len is received).
Fixes: 8f0009a22517 ("dm crypt: optionally support larger encryption sector size")
Reported-by: Bruno Prémont <bonbons@sysophe.eu>
Tested-by: Bruno Prémont <bonbons@sysophe.eu>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d1260e2a3f85f4c1010510a15f89597001318b1b upstream.
When a DM cache in writeback mode moves data between the slow and fast
device it can often avoid a copy if the triggering bio either:
i) covers the whole block (no point copying if we're about to overwrite it)
ii) the migration is a promotion and the origin block is currently discarded
Prior to this fix there was a race with case (ii). The discard status
was checked with a shared lock held (rather than exclusive). This meant
another bio could run in parallel and write data to the origin, removing
the discard state. After the promotion the parallel write would have
been lost.
With this fix the discard status is re-checked once the exclusive lock
has been aquired. If the block is no longer discarded it falls back to
the slower full copy path.
Fixes: b29d4986d ("dm cache: significant rework to leverage dm-bio-prison-v2")
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95b1369a9638cfa322ad1c0cde8efbe524059884 upstream.
When slub_debug is enabled kmalloc returns unaligned memory. XFS uses
this unaligned memory for its buffers (if an unaligned buffer crosses a
page, XFS frees it and allocates a full page instead - see the function
xfs_buf_allocate_memory).
dm-integrity checks if bv_offset is aligned on page size and this check
fail with slub_debug and XFS.
Fix this bug by removing the bv_offset check, leaving only the check for
bv_len.
Fixes: 7eada909bfd7 ("dm: add integrity target")
Reported-by: Bruno Prémont <bonbons@sysophe.eu>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull block fixes from Jens Axboe:
"A collection of fixes for this series. This contains:
- NVMe pull request from Christoph, one uuid attribute fix, and one
fix for the controller memory buffer address for remapped BARs.
- use-after-free fix for bsg, from Benjamin Block.
- bcache race/use-after-free fix for a list traversal, fixing a
regression in this merge window. From Coly Li.
- null_blk change configfs dependency change from a 'depends' to a
'select'. This is a change from this merge window as well. From me.
- nbd signal fix from Josef, fixing a regression introduced with the
status code changes.
- nbd MAINTAINERS mailing list entry update.
- blk-throttle stall fix from Joseph Qi.
- blk-mq-debugfs fix from Omar, fixing an issue where we don't
register the IO scheduler debugfs directory, if the driver is
loaded with it. Only shows up if you switch through the sysfs
interface"
* 'for-linus' of git://git.kernel.dk/linux-block:
bsg-lib: fix use-after-free under memory-pressure
nvme-pci: Use PCI bus address for data/queues in CMB
blk-mq-debugfs: fix device sched directory for default scheduler
null_blk: change configfs dependency to select
blk-throttle: fix possible io stall when upgrade to max
MAINTAINERS: update list for NBD
nbd: fix -ERESTARTSYS handling
nvme: fix visibility of "uuid" ns attribute
bcache: use llist_for_each_entry_safe() in __closure_wake_up()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a stable fix for the alignment of the event number reported at the
end of the 'DM_LIST_DEVICES' ioctl.
- a couple stable fixes for the DM crypt target.
- a DM raid health status reporting fix.
* tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm raid: fix incorrect status output at the end of a "recover" process
dm crypt: reject sector_size feature if device length is not aligned to it
dm crypt: fix memory leak in crypt_ctr_cipher_old()
dm ioctl: fix alignment of event number in the device list
|
|
There are three important fields that indicate the overall health and
status of an array: dev_health, sync_ratio, and sync_action. They tell
us the condition of the devices in the array, and the degree to which
the array is synchronized.
This commit fixes a condition that is reported incorrectly. When a member
of the array is being rebuilt or a new device is added, the "recover"
process is used to synchronize it with the rest of the array. When the
process is complete, but the sync thread hasn't yet been reaped, it is
possible for the state of MD to be:
mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ]
curr_resync_completed = <max dev size> (but not MaxSector)
and all rdevs to be In_sync.
This causes the 'array_in_sync' output parameter that is passed to
rs_get_progress() to be computed incorrectly and reported as 'false' --
or not in-sync. This in turn causes the dev_health status characters to
be reported as all 'a', rather than the proper 'A'.
This can cause erroneous output for several seconds at a time when tools
will want to be checking the condition due to events that are raised at
the end of a sync process. Fix this by properly calculating the
'array_in_sync' return parameter in rs_get_progress().
Also, remove an unnecessary intermediate 'recovery_cp' variable in
rs_get_progress().
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
