| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 3cef738208e5c3cb7084e208caf9bbf684f24feb ]
IRQs 0 (IPI) and 1 (MSI) are handled internally by this driver,
generic_handle_domain_irq() is never called for these IRQs.
Disallow mapping these IRQs.
[ Marek: changed commit message ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c5af2c90ba5629f0424a8d315f75fb8d91713c3c upstream.
gicv2m_of_init() fails to perform an of_node_put() when
of_address_to_resource() fails, leading to a refcount leak.
Address this by moving the error handling path outside of the loop and
making it common to all failure modes.
Fixes: 4266ab1a8ff5 ("irqchip/gic-v2m: Refactor to prepare for ACPI support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240820092843.1219933-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 382d2ffe86efb1e2fa803d2cf17e5bfc34e574f3 ]
This BUG_ON() is useless, because the same effect will be obtained
by letting the code run its course and vm being dereferenced,
triggering an exception.
So just remove this check.
Signed-off-by: Guanrui Huang <guanrui.huang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240418061053.96803-3-guanrui.huang@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dce0919c83c325ac9dec5bc8838d5de6d32c01b1 ]
As per the hardware team, TIEN and TINT source should not set at the same
time due to a possible hardware race leading to spurious IRQ.
Currently on some scenarios hardware settings for TINT detection is not in
sync with TINT source as the enable/disable overrides source setting value
leading to hardware inconsistent state. For eg: consider the case GPIOINT0
is used as TINT interrupt and configuring GPIOINT5 as edge type. During
rzg2l_irq_set_type(), TINT source for GPIOINT5 is set. On disable(),
clearing of the entire bytes of TINT source selection for GPIOINT5 is same
as GPIOINT0 with TIEN disabled. Apart from this during enable(), the
setting of GPIOINT5 with TIEN results in spurious IRQ as due to a HW race,
it is possible that IP can use the TIEN with previous source value
(GPIOINT0).
So, just update TIEN during enable/disable as TINT source is already set
during rzg2l_irq_set_type(). This will make the consistent hardware
settings for detection method tied with TINT source and allows to simplify
the code.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d73f0f49daa84176c3beee1606e73c7ffb6af8b2 upstream.
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81a91abab1307d7725fa4620952c0767beae7753 upstream.
lpic_gsi_to_irq() should return a valid Linux interrupt number if
acpi_register_gsi() succeeds, and return 0 otherwise. But lpic_gsi_to_irq()
converts a negative return value of acpi_register_gsi() to a positive value
silently.
Convert the return value explicitly.
Fixes: e8bba72b396c ("irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch")
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240723064508.35560-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f872d4af79fe8c71ae291ce8875b477e1669a6c7 upstream.
This lock is acquired under irq_desc::lock with interrupts disabled.
When PREEMPT_RT is enabled, 'spinlock_t' becomes preemptible, which results
in invalid lock acquire context;
[ BUG: Invalid wait context ]
swapper/0/1 is trying to lock:
ffff0000008fed30 (&ctl->lock){....}-{3:3}, at: meson_gpio_irq_update_bits0
other info that might help us debug this:
context-{5:5}
3 locks held by swapper/0/1:
#0: ffff0000003cd0f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0x90c
#1: ffff000004714650 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq0
#2: ffff0000047144c8 (&irq_desc_lock_class){-.-.}-{2:2}, at: __setup_irq0
stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.9-sdkernel #1
Call trace:
_raw_spin_lock_irqsave+0x60/0x88
meson_gpio_irq_update_bits+0x34/0x70
meson8_gpio_irq_set_type+0x78/0xc4
meson_gpio_irq_set_type+0x30/0x60
__irq_set_trigger+0x60/0x180
__setup_irq+0x30c/0x6e0
request_threaded_irq+0xec/0x1a4
Fixes: 215f4cc0fb20 ("irqchip/meson: Add support for gpio interrupt controller")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240729131850.3015508-1-avkrasnov@salutedevices.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6be6cba9c4371d27f78d900ccfe34bb880d9ee20 ]
The mbigen interrupt chip has its per node registers located in a
contiguous region of page sized chunks. The code maps them into virtual
address space as a contiguous region and determines the address of a node
by using the node ID as index.
mbigen chip
|-----------------|------------|--------------|
mgn_node_0 mgn_node_1 ... mgn_node_i
|--------------| |--------------| |----------------------|
[0x0000, 0x0x0FFF] [0x1000, 0x1FFF] [i*0x1000, (i+1)*0x1000 - 1]
This works correctly up to 10 nodes, but then fails because the 11th's
array slot is used for the MGN_CLEAR registers.
mbigen chip
|-----------|--------|--------|---------------|--------|
mgn_node_0 mgn_node_1 ... mgn_clear_register ... mgn_node_i
|-----------------|
[0xA000, 0xAFFF]
Skip the MGN_CLEAR register space when calculating the offset for node IDs
greater than or equal to ten.
Fixes: a6c2f87b8820 ("irqchip/mbigen: Implement the mbigen irq chip operation functions")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240730014400.1751530-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 33b1c47d1fc0b5f06a393bb915db85baacba18ea upstream.
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ]
Fixes: 0136afa08967 ("irqchip: Add driver for imx-irqsteer controller")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240703163250.47887-1-shenwei.wang@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9c3ee5d0fdb069b54902300df6ac822027f3b0a upstream.
The liointc hardware provides separate Interrupt Status Registers (ISR) for
each core. The current code uses always the ISR of core #0, which works
during boot because by default all interrupts are routed to core #0.
When the interrupt routing changes in the firmware configuration then this
causes interrupts to be lost because they are not configured in the
corresponding core.
Use the core index to access the correct ISR instead of a hardcoded 0.
[ tglx: Massaged changelog ]
Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support")
Co-developed-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d64eaeeeda5659d52da1af79d237269ba3c2d2c upstream.
Multi-bridge machines required that all eiointc controllers in the system
are initialized, otherwise the system does not boot.
The initialization happens on the boot CPU during early boot and relies on
cpu_to_node() for identifying the individual nodes.
That works when the number of possible CPUs is large enough, but with a
command line limit, e.g. "nr_cpus=$N" for kdump, but fails when the CPUs
of the secondary nodes are not covered.
During early ACPI enumeration all CPU to node mappings are recorded up to
CONFIG_NR_CPUS. These are accessible via early_cpu_to_node() even in the
case that "nr_cpus=N" truncates the number of possible CPUs and only
provides the possible CPUs via cpu_to_node() translation.
Change the node lookup in the driver to use early_cpu_to_node() so that
even with a limitation on the number of possible CPUs all eointc instances
are initialized.
This can't obviously cure the case where CONFIG_NR_CPUS is too small.
[ tglx: Massaged changelog ]
Fixes: 64cc451e45e1 ("irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240623034113.1808727-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
IRQ_LOONGARCH_CPU
[ Upstream commit 42a7d887664b02a747ef5d479f6fd01081564af8 ]
An interrupt's effective affinity can only be different from its configured
affinity if there are multiple CPUs. Make it clear that this option is only
meaningful when SMP is enabled. Otherwise, there exists "WARNING: unmet
direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK" when make
menuconfig if CONFIG_SMP is not set on LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240326121130.16622-3-yangtiezhu@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b97e8a2f7130a4b30d1502003095833d16c028b3 upstream.
its_vlpi_prop_update() calls lpi_write_config() which obtains the
mapping information for a VLPI without lock held. So it could race
with its_vlpi_unmap().
Since all calls from its_irq_set_vcpu_affinity() require the same
lock to be held, hoist the locking there instead of sprinkling the
locking all over the place.
This bug was discovered using Coverity Static Analysis Security Testing
(SAST) by Synopsys, Inc.
[ tglx: Use guard() instead of goto ]
Fixes: 015ec0386ab6 ("irqchip/gic-v3-its: Add VLPI configuration handling")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240531162144.28650-1-hagarhem@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0110c4b110477bb1f19b0d02361846be7ab08300 ]
When riscv_intc_init_common() fails, the firmware node allocated is not
freed. Add the missing free().
Fixes: 7023b9d83f03 ("irqchip/riscv-intc: Add ACPI support")
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240527081113.616189-1-sunilvl@ventanamicro.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4cc33e78ba8624a79ba8dea98ce5c85aa9ca33c ]
Add support for the Andes hart-level interrupt controller. This
controller provides interrupt mask/unmask functions to access the
custom register (SLIE) where the non-standard S-mode local interrupt
enable bits are located. The base of custom interrupt number is set
to 256.
To share the riscv_intc_domain_map() with the generic RISC-V INTC and
ACPI, add a chip parameter to riscv_intc_init_common(), so it can be
passed to the irq_domain_set_info() as a private data.
Andes hart-level interrupt controller requires the "andestech,cpu-intc"
compatible string to be present in interrupt-controller of cpu node to
enable the use of custom local interrupt source.
e.g.,
cpu0: cpu@0 {
compatible = "andestech,ax45mp", "riscv";
...
cpu0-intc: interrupt-controller {
#interrupt-cells = <0x01>;
compatible = "andestech,cpu-intc", "riscv,cpu-intc";
interrupt-controller;
};
};
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240222083946.3977135-4-peterlin@andestech.com
Stable-dep-of: 0110c4b11047 ("irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 96303bcb401c21dc1426d8d9bb1fc74aae5c02a9 ]
Currently, the implementation of the RISC-V INTC driver uses the
interrupt cause as the hardware interrupt number, with a maximum of
64 interrupts. However, the platform can expand the interrupt number
further for custom local interrupts.
To fully utilize the available local interrupt sources, switch
to using irq_domain_create_tree() that creates the radix tree
map, add global variables (riscv_intc_nr_irqs, riscv_intc_custom_base
and riscv_intc_custom_nr_irqs) to determine the valid range of local
interrupt number (hwirq).
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Randolph <randolph@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-3-peterlin@andestech.com
Stable-dep-of: 0110c4b11047 ("irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b327708798809328f21da8dc14cc8883d1e8a4b3 ]
When pch_msi_parent_domain_alloc() returns an error, there is an off-by-one
in the number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead of the
relative index of the last allocated one.
Fixes: 632dcc2c75ef ("irqchip: Add Loongson PCH MSI controller")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240327142334.1098-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff3669a71afa06208de58d6bea1cc49d5e3fcbd1 ]
When alpine_msix_gic_domain_alloc() fails, there is an off-by-one in the
number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead
of the relative index of the last allocated one.
Fixes: 3841245e8498 ("irqchip/alpine-msi: Fix freeing of interrupts on allocation error path")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240327142305.1048-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c26591afd33adce296c022e3480dea4282b7ef91 upstream.
The error handling path in its_vpe_irq_domain_alloc() causes a double free
when its_vpe_init() fails after successfully allocating at least one
interrupt. This happens because its_vpe_irq_domain_free() frees the
interrupts along with the area bitmap and the vprop_page and
its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the
vprop_page again.
Fix this by unconditionally invoking its_vpe_irq_domain_free() which
handles all cases correctly and by removing the bitmap/vprop_page freeing
from its_vpe_irq_domain_alloc().
[ tglx: Massaged change log ]
Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown")
Signed-off-by: Guanrui Huang <guanrui.huang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240418061053.96803-2-guanrui.huang@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 853a6030303f8a8fa54929b68e5665d9b21aa405 ]
RZ/G2L interrupt chips require that the interrupt is masked before changing
the NMI, IRQ, TINT interrupt settings. Aside of that, after setting an edge
trigger type it is required to clear the interrupt status register in order
to avoid spurious interrupts.
The current implementation fails to do either of that and therefore is
prone to generate spurious interrupts when setting the trigger type.
Address this by:
- Ensuring that the interrupt is masked at the chip level across the
update for the TINT chip
- Clearing the interrupt status register after updating the trigger mode
for edge type interrupts
[ tglx: Massaged changelog and reverted the spin_lock_irqsave() change as
the set_type() callback is always called with interrupts disabled. ]
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4b5cd61a6fdd92ede0dc39f0850a182affd1323 ]
Rename rzg2l_irq_eoi()->rzg2l_clear_irq_int() and simplify the code by
removing redundant priv local variable.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Stable-dep-of: 853a6030303f ("irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cb6362c63df233172eaecddaf9ce2ce2f769112 ]
Rename rzg2l_tint_eoi()->rzg2l_clear_tint_int() and simplify the code by
removing redundant priv and hw_irq local variables.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Stable-dep-of: 853a6030303f ("irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
register's index
[ Upstream commit 2eca4731cc66563b3919d8753dbd74d18c39f662 ]
There are 2 TITSR registers available on the IA55 interrupt controller.
Add a macro that retrieves the TITSR register offset based on it's
index. This macro is useful in when adding suspend/resume support so both
TITSR registers can be accessed in a for loop.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231120111820.87398-7-claudiu.beznea.uj@bp.renesas.com
Stable-dep-of: 853a6030303f ("irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9eec61df55c51415409c7cc47e9a1c8de94a0522 ]
The irq_eoi() callback of the RZ/G2L interrupt chip clears the relevant
interrupt cause bit in the TSCR register by writing to it.
This write is not sufficient because the write is posted and therefore not
guaranteed to immediately clear the bit. Due to that delay the CPU can
raise the just handled interrupt again.
Prevent this by reading the register back which causes the posted write to
be flushed to the hardware before the read completes.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef88eefb1a81a8701eabb7d5ced761a66a465a49 ]
The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes
the operation to clear interrupts through the ISCR register as follows:
[Write operation]
When "Falling-edge detection", "Rising-edge detection" or
"Falling/Rising-edge detection" is set in IITSR:
- In case ISTAT is 1
0: IRQn interrupt detection status is cleared.
1: Invalid to write.
- In case ISTAT is 0
Invalid to write.
When "Low-level detection" is set in IITSR.:
Invalid to write.
Take the interrupt type into account when clearing interrupts through the
ISCR register to avoid writing the ISCR when the interrupt type is level.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com
Stable-dep-of: 9eec61df55c5 ("irqchip/renesas-rzg2l: Flush posted write in irq_eoi()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9c92006b896c767218aabe8947b62026a571cfd0 upstream.
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as
explained in the description of Interrupt Completion in the PLIC spec:
"The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored."
Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked")
ensured that EOI is successful by enabling interrupt first, before EOI.
Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask
operations") removed the interrupt enabling code from the previous
commit, because it assumes that interrupt should already be enabled at the
point of EOI.
However, this is incorrect: there is a window after a hart claiming an
interrupt and before irq_desc->lock getting acquired, interrupt can be
disabled during this window. Thus, EOI can be invoked while the interrupt
is disabled, effectively nullify this EOI. This results in the interrupt
never gets asserted again, and the device who uses this interrupt appears
frozen.
Make sure that interrupt is really enabled before EOI.
Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec4308ecfc887128a468f03fb66b767559c57c23 upstream.
The GIC/ITS code is designed to ensure to pick up any preallocated LPI
tables on the redistributors, as enabling LPIs is a one-way switch. There
is no such restriction for vLPIs, and for GICv4.1 it is expected to
allocate a new vPE table at boot.
This works as intended when initializing an ITS, however when setting up a
redistributor in cpu_init_lpis() the early return for preallocated RD
tables skips straight past the GICv4 setup. This all comes to a head when
trying to kexec() into a new kernel, as the new kernel silently fails to
set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs.
Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always
initializes GICv4 on the way out, even if the other RD tables were
preallocated.
Fixes: 6479450f72c1 ("irqchip/gic-v4: Fix occasional VLPI drop")
Reported-by: George Cherian <gcherian@marvell.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219185809.286724-2-oliver.upton@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb33a46cd75e18773dd5a414744507d84ae90870 upstream.
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(),
but subsys_register() is not called by platform_bus_init().
Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL.
This makes mbigen_of_create_domain() always return -ENODEV.
Don't try to retrieve the parent via bus_get_dev_root() and
unconditionally hand a NULL pointer to of_platform_device_create() to
fix this.
Fixes: fea087fc291b ("irqchip/mbigen: move to use bus_get_dev_root()")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240220111429.110666-1-chenjun102@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af9acbfc2c4b72c378d0b9a2ee023ed01055d3e2 upstream.
When updating the affinity of a VPE, the VMOVP command is currently skipped
if the two CPUs are part of the same VPE affinity.
But this is wrong, as the doorbell corresponding to this VPE is still
delivered on the 'old' CPU, which screws up the balancing. Furthermore,
offlining that 'old' CPU results in doorbell interrupts generated for this
VPE being discarded.
The harsh reality is that VMOVP cannot be elided when a set_affinity()
request occurs. It needs to be obeyed, and if an optimisation is to be
made, it is at the point where the affinity change request is made (such as
in KVM).
Drop the VMOVP elision altogether, and only use the vpe_table_mask
to try and stay within the same ITS affinity group if at all possible.
Fixes: dd3f050a216e (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP)
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b02da04ad978827e5ccd675acf170198f747a7a upstream.
While refactoring the way the ITSs are probed, the handling of quirks
applicable to ACPI-based platforms was lost. As a result, systems such as
HIP07 lose their GICv4 functionnality, and some other may even fail to
boot, unless they are configured to boot with DT.
Move the enabling of quirks into its_probe_one(), making it common to all
firmware implementations.
Fixes: 9585a495ac93 ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-3-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0344d6854d25a8b3b901c778b1728885dd99007 upstream.
It was observed on Broadcom devices that use GIC v3 architecture L1
interrupt controllers as the parent of brcmstb-l2 interrupt controllers
that the deactivation of the parent interrupt could happen before the
brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the
interrupt only to find that no L2 interrupt was pending. The result was a
spurious interrupt invoking handle_bad_irq() with its associated
messaging. While this did not create a functional problem it is a waste of
cycles.
The hazard exists because the memory mapped bus writes to the brcmstb-l2
registers are buffered and the GIC v3 architecture uses a very efficient
system register write to deactivate the interrupt.
Add a write memory barrier prior to invoking chained_irq_exit() to
introduce a dsb(st) on those systems to ensure the system register write
cannot be executed until the memory mapped writes are visible to the
system.
[ florian: Added Fixes tag ]
Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 846297e11e8ae428f8b00156a0cfe2db58100702 ]
Although the GICv3 code base has gained some handling of systems failing to
handle the shareability attributes, the GICv4 side of things has been
firmly ignored.
This is unfortunate, as the new recent addition of the "dma-noncoherent" is
supposed to apply to all of the GICR tables, and not just the ones that are
common to v3 and v4.
Add some checks to handle the VPROPBASE/VPENDBASE shareability and
cacheability attributes in the same way we deal with the other GICR_BASE
registers, wrapping the flag check in a helper for improved readability.
Note that this has been found by inspection only, as I don't have access to
HW that suffers from this particular issue.
Fixes: 3a0fff0fb6a3 ("irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240213101206.2137483-2-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1c2765c6afcd1f71f76ed8c9bf94acedab4cecb ]
eiointc_domain_alloc() uses struct eiointc, which is not defined, for a
pointer. Older compilers treat that as a forward declaration and due to
assignment of a void pointer there is no warning emitted. As the variable
is then handed in as a void pointer argument to irq_domain_set_info() the
code is functional.
Use struct eiointc_priv instead.
[ tglx: Rewrote changelog ]
Fixes: dd281e1a1a93 ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-2-maobibo@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d3badb15613c14dd35d3495b1dde5c90fcd616dd ]
In non-coherent GIC designs, the ITS tables must be flushed before writing
to the GITS_BASER<n> registers, otherwise the ITS could read dirty tables,
which results in unpredictable behavior.
Flush the tables right at the begin of its_setup_baser() to prevent that.
[ tglx: Massage changelog ]
Fixes: a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum workaround")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fang Xiang <fangxiang3@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231030083256.4345-1-fangxiang3@xiaomi.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f99b926f6543faeadba1b4524d8dc9c102489135 ]
Multi-socket systems have a separate PLIC in each socket, so __plic_init()
is invoked for each PLIC. __plic_init() registers syscore operations, which
obviously fails on the second invocation.
Move it into the already existing condition for installing the CPU hotplug
state so it is only invoked once when the first PLIC is initialized.
[ tglx: Massaged changelog ]
Fixes: e80f0b6a2cf3 ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231025142820.390238-4-apatel@ventanamicro.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Restore unintentionally lost quirk settings in the GIC irqchip driver,
which broke certain devices"
* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Don't override quirk settings with default values
|
|
When splitting the allocation of the ITS node from its configuration,
some of the default settings were kept in the latter instead of
being moved to the former.
This has the side effect of negating some of the quirk detections that
have happened in between, amongst which the dreaded Synquacer hack
(that also affect Dominic's TI platform).
Move the initialisation of these fields early, so that they can again be
overriden by the Synquacer quirk.
Fixes: 9585a495ac93 ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Reported by: Dominic Rath <dominic.rath@ibv-augsburg.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dominic Rath <dominic.rath@ibv-augsburg.net>
Link: https://lore.kernel.org/r/20231024084831.GA3788@JADEVM-DRA
Link: https://lore.kernel.org/r/20231024143431.2144579-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
Use the existing irq_data_get_irq_chip_data() helper instead of
open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/8e47cc6400e5a82c854c855948d2665a3a3197e3.1695819391.git.geert+renesas@glider.be
|
|
The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger
flags specified in the device tree were being ignored. This was
preventing the RTC alarm interrupt from working, because it must be set
to trigger on the rising edge to function correctly.
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003162003.1649967-1-ben.wolsieffer@hefring.com
|
|
The RISC-V INTC local interrupts are per-HART (or per-CPU) so we
create INTC IRQ domain only for the INTC node belonging to the boot
HART. This means only the boot HART INTC node will be marked as
initialized and other INTC nodes won't be marked which results
downstream interrupt controllers (such as PLIC, IMSIC and APLIC
direct-mode) not being probed due to missing device suppliers.
To address this issue, we mark all INTC node for which we don't
create IRQ domain as initialized.
Reported-by: Dmitry Dunaev <dunaev@tecon.ru>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230926102801.1591126-1-dunaev@tecon.ru
Link: https://lore.kernel.org/r/20231003044403.1974628-4-apatel@ventanamicro.com
|
|
The GIC architecture specification defines a set of registers
for redistributors and ITSes that control the sharebility and
cacheability attributes of redistributors/ITSes initiator ports
on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER,
GITS_BASER<n>).
Architecturally the GIC provides a means to drive shareability
and cacheability attributes signals and related IWB/OWB/ISH barriers
but it is not mandatory for designs to wire up the corresponding
interconnect signals that control the cacheability/shareability
of transactions.
Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes
the redistributors and ITSes non-coherent observers.
So far, the GIC driver on probe executes a write to "probe" for
the redistributors and ITSes registers shareability bitfields
by writing a value (ie InnerShareable - the shareability domain the
CPUs are in) and check it back to detect whether the value sticks or
not; this hinges on a GIC programming model behaviour that predates the
current specifications, that just define shareability bits as writeable
but do not guarantee that writing certain shareability values
enable the expected behaviour for the redistributors/ITSes
memory interconnect ports.
To enable non-coherent GIC designs, introduce the "dma-noncoherent"
device tree property to allow firmware to describe redistributors and
ITSes as non-coherent observers on the memory interconnect and use the
property to force the shareability attributes to be programmed into the
redistributors and ITSes registers through the GIC quirks mechanism.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-3-lpieralisi@kernel.org
|
|
In order to pave the way for more fancy quirk handling without making
more of a mess of this terrible driver, split the allocation of the
ITS descriptor (its_node) from the actual probing.
This will allow firmware-specific hooks to be added between these
two points.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-4-lpieralisi@kernel.org
|
|
The logic to clear the TINT interrupt source in rzg2l_irqc_irq_disable()
is wrong as the mask is correct only for LSB on the TSSR register.
This issue is found when testing with two TINT interrupt sources. So fix
the logic for all TINTs by using the macro TSSEL_SHIFT() to multiply
tssr_offset with 8.
Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230918122411.237635-2-biju.das.jz@bp.renesas.com
|
|
Add <linux/irqchips/xtensa-mx.h> to provide the function prototype to
prevent a build warning:
drivers/irqchip/irq-xtensa-mx.c:166:12: warning: no previous prototype for 'xtensa_mx_init_legacy' [-Wmissing-prototypes]
166 | int __init xtensa_mx_init_legacy(struct device_node *interrupt_parent)
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Message-Id: <20230920052139.10570-10-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Starting from HW version 3.2 the IRQ_ENABLE bit has moved to the
IRQ_i_CFG register and requires a change of the driver to avoid
writing into an undefined register address.
Get the HW version from registers and set the IRQ_ENABLE bit to the
correct register depending on the HW version.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230905-topic-sm8x50-upstream-pdc-ver-v4-1-fc633c7df84b@linaro.org
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The main change this time was the introduction of the drivers/genpd
subsystem that gets split out from drivers/soc to keep common
functionality together.
The SCMI driver subsystem gets an update to version 3.2 of the
specification. There are also updates to memory, reset and other
firmware drivers.
On the soc driver side, the updates are mostly cleanups across a
number of Arm platforms. On driver for loongarch adds power management
for DT based systems, another driver is for HiSilicon's Arm server
chips with their HCCS system health interface.
The remaining updates for the most part add support for additional
hardware in existing drivers or contain minor cleanups. Most of these
are for the Qualcomm Snapdragon platform"
* tag 'soc-drivers-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (136 commits)
bus: fsl-mc: Use common ranges functions
soc: kunpeng_hccs: fix some sparse warnings about incorrect type
soc: loongson2_pm: add power management support
soc: dt-bindings: add loongson-2 pm
soc: rockchip: grf: Fix SDMMC not working on RK3588 with bus-width > 1
genpd: rockchip: Add PD_VO entry for rv1126
bus: ti-sysc: Fix cast to enum warning
soc: kunpeng_hccs: add MAILBOX dependency
MAINTAINERS: remove OXNAS entry
dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated
irqchip: irq-versatile-fpga: remove obsolete oxnas compatible
soc: qcom: aoss: Tidy up qmp_send() callers
soc: qcom: aoss: Format string in qmp_send()
soc: qcom: aoss: Move length requirements from caller
soc: kunpeng_hccs: fix size_t format string
soc: ti: k3-socinfo.c: Add JTAG ID for AM62PX
dt-bindings: firmware: qcom: scm: Updating VMID list
firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
firmware: imx: scu-irq: add imx_scu_irq_get_status
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Fix for Loongsoon eiointc init error handling
- Fix a bunch of warning showing up when -Wmissing-prototypes is set
- A set of fixes for drivers checking for 0 as a potential return
value from platform_get_irq()
- Another set of patches converting existing code to the use of helpers
such as of_address_count() and devm_platform_get_and_ioremap_resource()
- A tree-wide cleanup of drivers including of_*.h without discrimination
- Added support for the Amlogic C3 SoCs
Link: https://lore.kernel.org/lkml/20230828091543.4001857-1-maz@kernel.org
|
