summaryrefslogtreecommitdiff
path: root/drivers/iommu/mtk_iommu.c
AgeCommit message (Collapse)Author
2022-05-04iommu/mediatek: Just move code position in hw_initYong Wu
No functional change too, prepare for mt8195 IOMMU support bank functions. Some global control settings are in bank0 while the other banks have their bank independent setting. Here only move the global control settings and the independent registers together. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-26-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Only adjust code about register baseYong Wu
No functional change. Use "base" instead of the data->base. This is avoid to touch too many lines in the next patches. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-25-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add mt8195 supportYong Wu
mt8195 has 3 IOMMU, containing 2 MM IOMMUs, one is for vdo, the other is for vpp. and 1 INFRA IOMMU. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-24-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add PCIe supportYong Wu
Currently the code for of_iommu_configure_dev_id is like this: static int of_iommu_configure_dev_id(struct device_node *master_np, struct device *dev, const u32 *id) { struct of_phandle_args iommu_spec = { .args_count = 1 }; err = of_map_id(master_np, *id, "iommu-map", "iommu-map-mask", &iommu_spec.np, iommu_spec.args); ... } It supports only one id output. BUT our PCIe HW has two ID(one is for writing, the other is for reading). I'm not sure if we should change of_map_id to support output MAX_PHANDLE_ARGS. Here add the solution in ourselve drivers. If it's pcie case, enable one more bit. Not all infra iommu support PCIe, thus add a PCIe support flag here. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-23-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add infra iommu supportYong Wu
The infra iommu enable bits in mt8195 is in the pericfg register segment, use regmap to update it. If infra iommu master translation fault, It doesn't have the larbid/portid, thus print out the whole register value. Since regmap_update_bits may fail, add return value for mtk_iommu_config. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-22-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add a PM_CLK_AO flag for infra iommuYong Wu
The power/clock of infra iommu is always on, and it doesn't have the device link with the master devices, then the infra iommu device's PM status is not active, thus we add A PM_CLK_AO flag for infra iommu. The tlb operation is a bit not clear here, there are 2 special cases. Comment them in the code. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-21-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Allow IOMMU_DOMAIN_UNMANAGED for PCIe VFIOYong Wu
Allow the type IOMMU_DOMAIN_UNMANAGED since vfio_iommu_type1.c always call iommu_domain_alloc. The PCIe EP works ok when going through vfio. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-20-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Adjust device link when it is sub-commonYong Wu
For MM IOMMU, We always add device link between smi-common and IOMMU HW. In mt8195, we add smi-sub-common. Thus, if the node is sub-common, we still need find again to get smi-common, then do device link. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-19-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Contain MM IOMMU flow with the MM TYPEYong Wu
Prepare for supporting INFRA_IOMMU, and APU_IOMMU later. For Infra IOMMU/APU IOMMU, it doesn't have the "larb""port". thus, Use the MM flag contain the MM_IOMMU special flow, Also, it moves a big chunk code about parsing the mediatek,larbs into a function, this is only needed for MM IOMMU. and all the current SoC are MM_IOMMU. The device link between iommu consumer device and smi-larb device only is needed in MM iommu case. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-18-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add IOMMU_TYPE flagYong Wu
Add IOMMU_TYPE definition. In the mt8195, we have another IOMMU_TYPE: infra iommu, also there will be another APU_IOMMU, thus, use 2bits for the IOMMU_TYPE. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-17-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add SUB_COMMON_3BITS flagYong Wu
In prevous SoC, the sub common id occupy 2 bits. the mt8195's sub common id has 3bits. Add a new flag for this. and rename the previous flag to _2BITS. For readable, I put these two flags together, then move the other flags. no functional change. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-16-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Always enable output PA over 32bits in isrYong Wu
Currently the output PA[32:33] is contained by the flag IOVA_34. This is not right. the iova_34 has no relation with pa[32:33], the 32bits iova still could map to pa[32:33]. Move it out from the flag. No need fix tag since currently only mt8192 use the calulation and it always has this IOVA_34 flag. Prepare for the IOMMU that still use IOVA 32bits but its dram size may be over 4GB. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-15-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Remove the granule in the tlb flushYong Wu
The MediaTek IOMMU doesn't care about granule when tlb flushing. Remove this variable. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-14-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add a flag STD_AXI_MODEYong Wu
Add a new flag STD_AXI_MODE which is prepared for infra and apu iommu which use the standard axi mode. All the current SoC don't use this flag. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-13-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add a flag DCM_DISABLEYong Wu
In the infra iommu, we should disable DCM. add a new flag for this. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-12-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add 12G~16G support for multi domainsYong Wu
In mt8192, we preassign 0-4G; 4G-8G; 8G-12G for different multimedia engines. This depends on the "dma-ranges=" in the iommu consumer's dtsi node. Adds 12G-16G region here. and reword the previous comment. we don't limit which master locate in which region. CCU still is 8G-12G. Don't change it here. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-11-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Adapt sharing and non-sharing pgtable caseYong Wu
In previous mt2712, Both IOMMUs are MM IOMMU, and they will share pgtable. However in the latest SoC, another is infra IOMMU, there is no reason to share pgtable between MM with INFRA IOMMU. This patch manage to implement the two case(sharing and non-sharing pgtable). Currently we use for_each_m4u to loop the 2 HWs. Add the list_head into this macro. In the sharing pgtable case, the list_head is the global "m4ulist". In the non-sharing pgtable case, the list_head is hw_list_head which is a variable in the "data". then for_each_m4u will only loop itself. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-10-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add mutex for data in the mtk_iommu_domainYong Wu
Same with the previous patch, add a mutex for the "data" in the mtk_iommu_domain. Just improve the safety for multi devices enter attach_device at the same time. We don't get the real issue for this. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-9-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add mutex for m4u_group and m4u_dom in dataYong Wu
Add a mutex to protect the data in the structure mtk_iommu_data, like ->"m4u_group" ->"m4u_dom". For the internal data, we should protect it in ourselves driver. Add a mutex for this. This could be a fix for the multi-groups support. Fixes: c3045f39244e ("iommu/mediatek: Support for multi domains") Signed-off-by: Yunfei Wang <yf.wang@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-8-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Remove clk_disable in mtk_iommu_removeYong Wu
After the commit b34ea31fe013 ("iommu/mediatek: Always enable the clk on resume"), the iommu clock is controlled by the runtime callback. thus remove the clk control in the mtk_iommu_remove. Otherwise, it will warning like: echo 14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind [ 51.413044] ------------[ cut here ]------------ [ 51.413648] vpp0_smi_iommu already disabled [ 51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/ drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 51.417174] Hardware name: MT8195V/C(ENG) (DT) [ 51.418635] pc : clk_core_disable+0xb0/0xb8 [ 51.419177] lr : clk_core_disable+0xb0/0xb8 ... [ 51.429375] Call trace: [ 51.429694] clk_core_disable+0xb0/0xb8 [ 51.430193] clk_core_disable_lock+0x24/0x40 [ 51.430745] clk_disable+0x20/0x30 [ 51.431189] mtk_iommu_remove+0x58/0x118 [ 51.431705] platform_remove+0x28/0x60 [ 51.432197] device_release_driver_internal+0x110/0x1f0 [ 51.432873] device_driver_detach+0x18/0x28 [ 51.433418] unbind_store+0xd4/0x108 [ 51.433886] drv_attr_store+0x24/0x38 [ 51.434363] sysfs_kf_write+0x40/0x58 [ 51.434843] kernfs_fop_write_iter+0x164/0x1e0 Fixes: b34ea31fe013 ("iommu/mediatek: Always enable the clk on resume") Reported-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-7-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Add list_del in mtk_iommu_removeYong Wu
Lack the list_del in the mtk_iommu_remove, and remove bus_set_iommu(*, NULL) since there may be several iommu HWs. we can not bus_set_iommu null when one iommu driver unbind. This could be a fix for mt2712 which support 2 M4U HW and list them. Fixes: 7c3a2ec02806 ("iommu/mediatek: Merge 2 M4U HWs into one iommu domain") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-6-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-05-04iommu/mediatek: Fix 2 HW sharing pgtable issueYong Wu
In the commit 4f956c97d26b ("iommu/mediatek: Move domain_finalise into attach_device"), I overlooked the sharing pgtable case. After that commit, the "data" in the mtk_iommu_domain_finalise always is the data of the current IOMMU HW. Fix this for the sharing pgtable case. Only affect mt2712 which is the only SoC that share pgtable currently. Fixes: 4f956c97d26b ("iommu/mediatek: Move domain_finalise into attach_device") Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20220503071427.2285-5-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-03-28Merge tag 'driver-core-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core changes for 5.18-rc1. Not much here, primarily it was a bunch of cleanups and small updates: - kobj_type cleanups for default_groups - documentation updates - firmware loader minor changes - component common helper added and take advantage of it in many drivers (the largest part of this pull request). All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits) Documentation: update stable review cycle documentation drivers/base/dd.c : Remove the initial value of the global variable Documentation: update stable tree link Documentation: add link to stable release candidate tree devres: fix typos in comments Documentation: add note block surrounding security patch note samples/kobject: Use sysfs_emit instead of sprintf base: soc: Make soc_device_match() simpler and easier to read driver core: dd: fix return value of __setup handler driver core: Refactor sysfs and drv/bus remove hooks driver core: Refactor multiple copies of device cleanup scripts: get_abi.pl: Fix typo in help message kernfs: fix typos in comments kernfs: remove unneeded #if 0 guard ALSA: hda/realtek: Make use of the helper component_compare_dev_name video: omapfb: dss: Make use of the helper component_compare_dev power: supply: ab8500: Make use of the helper component_compare_dev ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of iommu/mediatek: Make use of the helper component_compare/release_of drm: of: Make use of the helper component_release_of ...
2022-03-24Merge tag 'iommu-updates-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - IOMMU Core changes: - Removal of aux domain related code as it is basically dead and will be replaced by iommu-fd framework - Split of iommu_ops to carry domain-specific call-backs separatly - Cleanup to remove useless ops->capable implementations - Improve 32-bit free space estimate in iova allocator - Intel VT-d updates: - Various cleanups of the driver - Support for ATS of SoC-integrated devices listed in ACPI/SATC table - ARM SMMU updates: - Fix SMMUv3 soft lockup during continuous stream of events - Fix error path for Qualcomm SMMU probe() - Rework SMMU IRQ setup to prepare the ground for PMU support - Minor cleanups and refactoring - AMD IOMMU driver: - Some minor cleanups and error-handling fixes - Rockchip IOMMU driver: - Use standard driver registration - MSM IOMMU driver: - Minor cleanup and change to standard driver registration - Mediatek IOMMU driver: - Fixes for IOTLB flushing logic * tag 'iommu-updates-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (47 commits) iommu/amd: Improve amd_iommu_v2_exit() iommu/amd: Remove unused struct fault.devid iommu/amd: Clean up function declarations iommu/amd: Call memunmap in error path iommu/arm-smmu: Account for PMU interrupts iommu/vt-d: Enable ATS for the devices in SATC table iommu/vt-d: Remove unused function intel_svm_capable() iommu/vt-d: Add missing "__init" for rmrr_sanity_check() iommu/vt-d: Move intel_iommu_ops to header file iommu/vt-d: Fix indentation of goto labels iommu/vt-d: Remove unnecessary prototypes iommu/vt-d: Remove unnecessary includes iommu/vt-d: Remove DEFER_DEVICE_DOMAIN_INFO iommu/vt-d: Remove domain and devinfo mempool iommu/vt-d: Remove iova_cache_get/put() iommu/vt-d: Remove finding domain in dmar_insert_one_dev_info() iommu/vt-d: Remove intel_iommu::domains iommu/mediatek: Always tlb_flush_all when each PM resume iommu/mediatek: Add tlb_lock in tlb_flush_all iommu/mediatek: Remove the power status checking in tlb flush all ...
2022-03-08Merge branches 'arm/mediatek', 'arm/msm', 'arm/renesas', 'arm/rockchip', ↵Joerg Roedel
'arm/smmu', 'x86/vt-d' and 'x86/amd' into next
2022-03-04iommu/mediatek: Always tlb_flush_all when each PM resumeYong Wu
Prepare for 2 HWs that sharing pgtable in different power-domains. When there are 2 M4U HWs, it may has problem in the flush_range in which we get the pm_status via the m4u dev, BUT that function don't reflect the real power-domain status of the HW since there may be other HW also use that power-domain. DAM allocation is often done while the allocating device is runtime suspended. In such a case the iommu will also be suspended and partial flushing of the tlb will not be executed. Therefore, we add a tlb_flush_all in the pm_runtime_resume to make sure the tlb is always clean. In other case, the iommu's power should be active via device link with smi. Signed-off-by: Yong Wu <yong.wu@mediatek.com> [move the call to mtk_iommu_tlb_flush_all to the bottom of resume cb, improve doc/log] Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211208120744.2415-6-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-03-04iommu/mediatek: Add tlb_lock in tlb_flush_allYong Wu
The tlb_flush_all touches the registers controlling tlb operations. Protect it with the tlb_lock spinlock. This also require the range_sync func to release that spinlock before calling tlb_flush_all. Signed-off-by: Yong Wu <yong.wu@mediatek.com> [refactor commit log] Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211208120744.2415-5-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-03-04iommu/mediatek: Remove the power status checking in tlb flush allYong Wu
To simplify the code, Remove the power status checking in the tlb_flush_all, remove this: if (pm_runtime_get_if_in_use(data->dev) <= 0) continue; The mtk_iommu_tlb_flush_all is called from a) isr b) tlb flush range fail case c) iommu_create_device_direct_mappings In first two cases, the power and clock are always enabled. In the third case tlb flush is unnecessary because in a later patch in the series a full flush from the pm_runtime_resume callback is added. In addition, writing the tlb control register when the iommu is not resumed is ok and the write is ignored. Signed-off-by: Yong Wu <yong.wu@mediatek.com> [refactor commit log] Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211208120744.2415-4-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-03-04iommu/mediatek: Always check runtime PM status in tlb flush range callbackSebastian Reichel
In case of v4l2_reqbufs() it is possible, that a TLB flush is done without runtime PM being enabled. In that case the "Partial TLB flush timed out, falling back to full flush" warning is printed. Commit c0b57581b73b ("iommu/mediatek: Add power-domain operation") introduced has_pm as optimization to avoid checking runtime PM when there is no power domain attached. But without the PM domain there is still the device driver's runtime PM suspend handler, which disables the clock. Thus flushing should also be avoided when there is no PM domain involved. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20211208120744.2415-3-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-03-04iommu/mediatek: Remove for_each_m4u in tlb_sync_allYong Wu
The tlb_sync_all is called from these three functions: a) flush_iotlb_all: it will be called for each a iommu HW. b) tlb_flush_range_sync: it already has for_each_m4u. c) in irq: When IOMMU HW translation fault, Only need flush itself. Thus, No need for_each_m4u in this tlb_sync_all. Remove it. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211208120744.2415-2-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-02-28iommu: Split struct iommu_opsLu Baolu
Move the domain specific operations out of struct iommu_ops into a new structure that only has domain specific operations. This solves the problem of needing to know if the method vector for a given operation needs to be retrieved from the device or the domain. Logically the domain ops are the ones that make sense for external subsystems and endpoint drivers to use, while device ops, with the sole exception of domain_alloc, are IOMMU API internals. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220216025249.3459465-10-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-02-25iommu/mediatek: Make use of the helper component_compare/release_ofYong Wu
Use the common compare/release helpers from component. Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Yunfei Wang <yf.wang@mediatek.com> Cc: Libo Kang <libo.kang@mediatek.com> Cc: Anan Sun <anan.sun@mediatek.com> Cc: Mingyuan Ma <mingyuan.ma@mediatek.com> Cc: Xueqi Zhang <xueqi.zhang@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20220214060819.7334-20-yong.wu@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-28media: iommu/mediatek: Add device_link between the consumer and the larb devicesYong Wu
MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/ Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: iommu/mediatek: Add probe_defer for smi-larbYong Wu
Prepare for adding device_link. The iommu consumer should use device_link to connect with the smi-larb(supplier). then the smi-larb should run before the iommu consumer. Here we delay the iommu driver until the smi driver is ready, then all the iommu consumers always are after the smi driver. When there is no this patch, if some consumer drivers run before smi-larb, the supplier link_status is DL_DEV_NO_DRIVER(0) in the device_link_add, then device_links_driver_bound will use WARN_ON to complain that the link_status of supplier is not right. device_is_bound may be more elegant here. but it is not allowed to EXPORT from https://lore.kernel.org/patchwork/patch/1334670/. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-28media: iommu/mediatek: Return ENODEV if the device is NULLYong Wu
The platform device is created at: of_platform_default_populate_init: arch_initcall_sync ->of_platform_populate ->of_platform_device_create_pdata When entering our probe, all the devices should be already created. if it is null, means NODEV. Currently we don't get the fail case. It's a minor fix, no need add fixes tags. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2021-09-28iommu/mediatek: Fix out-of-range warning with clangArnd Bergmann
clang-14 notices that a comparison is never true when CONFIG_PHYS_ADDR_T_64BIT is disabled: drivers/iommu/mtk_iommu.c:553:34: error: result of comparison of constant 5368709120 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (dom->data->enable_4GB && pa >= MTK_IOMMU_4GB_MODE_REMAP_BASE) ~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Add an explicit check for the type of the variable to skip the check and the warning in that case. Fixes: b4dad40e4f35 ("iommu/mediatek: Adjust the PA for the 4GB Mode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210927121857.941160-1-arnd@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-20Merge branches 'apple/dart', 'arm/smmu', 'iommu/fixes', 'x86/amd', ↵Joerg Roedel
'x86/vt-d' and 'core' into next
2021-08-18iommu/mtk: Drop IOVA cookie managementRobin Murphy
The core code bakes its own cookies now. CC: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/b856648e7ee2b1017e7c7c02e2ddd50eaf72cbf7.1628682048.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-08-02iommu: Improve iommu_iotlb_gather helpersRobin Murphy
The Mediatek driver is not the only one which might want a basic address-based gathering behaviour, so although it's arguably simple enough to open-code, let's factor it out for the sake of cleanliness. Let's also take this opportunity to document the intent of these helpers for clarity. Cc: Joerg Roedel <joro@8bytes.org> Cc: Will Deacon <will@kernel.org> Cc: Jiajun Cao <caojiajun@vmware.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Nadav Amit <namit@vmware.com> Link: https://lore.kernel.org/r/20210723093209.714328-4-namit@vmware.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-08iommu: Drop unnecessary of_iommu.h includesRob Herring
The only place of_iommu.h is needed is in drivers/of/device.c. Remove it from everywhere else. Cc: Will Deacon <will@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Yong Wu <yong.wu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20210527193710.1281746-2-robh@kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16iommu: Streamline registration interfaceRobin Murphy
Rather than have separate opaque setter functions that are easy to overlook and lead to repetitive boilerplate in drivers, let's pass the relevant initialisation parameters directly to iommu_device_register(). Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16iommu/mediatek: Always enable the clk on resumeDafna Hirschfeld
In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume. Fixes: c0b57581b73b ("iommu/mediatek: Add power-domain operation") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210416105449.4744-1-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-07iommu/mediatek: Allow building as moduleYong Wu
The IOMMU in many SoC depends on the MM clocks and power-domain which are device_initcall normally, thus the subsys_init here is not helpful. This patch switches it to module_platform_driver which also allow the driver built as module. Correspondingly switch the config to tristate, and update the iommu_ops's owner. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210326032337.24578-2-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-08iommu/mediatek: Fix error code in probe()Dan Carpenter
This error path is supposed to return -EINVAL. It used to return directly but we added some clean up and accidentally removed the error code. Also I fixed a typo in the error message. Fixes: c0b57581b73b ("iommu/mediatek: Add power-domain operation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/YB0+GU5akSdu29Vu@mwanda Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-05iommu/mediatek: Fix unsigned domid comparison with less than zeroColin Ian King
Currently the check for domid < 0 is always false because domid is unsigned. Fix this by casting domid to an int before making the comparison. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210204150001.102672-1-colin.king@canonical.com Addresses-Coverity: ("Unsigned comparison against 0") Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-02-01iommu/mediatek: Add mt8192 supportYong Wu
Add mt8192 iommu support. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-33-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01iommu/mediatek: Remove unnecessary check in attach_deviceYong Wu
This priv_data is set in the of_xlate. if of_xlate failed, it should not enter attach_device. remove the unnecessary check. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-32-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01iommu/mediatek: Support master use iova over 32bitYong Wu
After extending v7s, our pagetable already support iova reach 16GB(34bit). the master got the iova via dma_alloc_attrs may reach 34bits, but its HW register still is 32bit. then how to set the bit32/bit33 iova? this depend on a SMI larb setting(bank_sel). we separate whole 16GB iova to four banks: bank: 0: 0~4G; 1: 4~8G; 2: 8-12G; 3: 12-16G; The bank number is (iova >> 32). We will preassign which bank the larbs belong to. currently we don't have a interface for master to adjust its bank number. Each a bank is a iova_region which is a independent iommu-domain. the iova range for each iommu-domain can't cross 4G. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> #for memory part Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-31-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01iommu/mediatek: Add iova reserved functionYong Wu
For multiple iommu_domains, we need to reserve some iova regions. Take a example, If the default iova region is 0 ~ 4G, but the 0x4000_0000 ~ 0x43ff_ffff is only for the special CCU0 domain. Thus we should exclude this region for the default iova region. Signed-off-by: Anan sun <anan.sun@mediatek.com> Signed-off-by: Chao Hao <chao.hao@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-30-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-02-01iommu/mediatek: Support for multi domainsYong Wu
Some HW IP(ex: CCU) require the special iova range. That means the iova got from dma_alloc_attrs for that devices must locate in his special range. In this patch, we prepare a iommu group(domain) for each a iova range requirement. Meanwhile we still use one pagetable which support 16GB iova. After this patch, If the iova range of a master is over 4G, the master should: a) Declare its special dma-ranges in its dtsi node. For example, If we preassign the iova 4G-8G for vcodec, then the vcodec dtsi node should add this: /* * iova start at 0x1_0000_0000, pa still start at 0x4000_0000 * size is 0x1_0000_0000. */ dma-ranges = <0x1 0x0 0x0 0x40000000 0x1 0x0>; /* 4G ~ 8G */ Note: we don't have a actual bus concept here. the master doesn't have its special parent node, thus this dma-ranges can only be put in the master's node. b) Update the dma_mask: dma_set_mask_and_coherent(dev, DMA_BIT_MASK(33)); Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-29-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 21:21:12 +0000