| Age | Commit message (Collapse) | Author |
|---|
|
The top of the 2 level stream table is (at most) 128k entries big, and two
high order allocations are required. One of __le64 which is programmed
into the HW (1M), and one of struct arm_smmu_strtab_l1_desc which holds
the CPU pointer (3M).
There is no reason to store the l2ptr_dma as nothing reads it. devm stores
a copy of it and the DMA memory will be freed via devm mechanisms. span is
a constant of 8+1. Remove both.
This removes 16 bytes from each arm_smmu_l1_ctx_desc and saves up to 2M of
memory per iommu instance.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
dmam_alloc_coherent() already returns zero'd memory so cfg->strtab.l1_desc
(the list of DMA addresses for the L2 entries) is already zero'd.
arm_smmu_init_l1_strtab() goes through and calls
arm_smmu_write_strtab_l1_desc() on the newly allocated (and zero'd) struct
arm_smmu_strtab_l1_desc, which ends up computing 'val = 0' and zeroing it
again.
Remove arm_smmu_init_l1_strtab() and just call devm_kcalloc() from
arm_smmu_init_strtab_2lvl to allocate the companion struct.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-318ed5f6983b+198f-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SVA cleanup made the SSID logic entirely general so all we need to do
is call it with the correct cd table entry for a S1 domain.
This is slightly tricky because of the ASID and how the locking works, the
simple fix is to just update the ASID once we get the right locks.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If the STE doesn't point to the CD table we can upgrade it by
reprogramming the STE with the appropriate S1DSS. We may also need to turn
on ATS at the same time.
Keep track if the installed STE is pointing at the cd_table and the ATS
state to trigger this path.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
S1DSS brings in quite a few new transition pairs that are
interesting. Test to/from S1DSS_BYPASS <-> S1DSS_SSID0, and
BYPASS <-> S1DSS_SSID0.
Test a contrived non-hitless flow to make sure that the logic works.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The HW supports this, use the S1DSS bits to configure the behavior
of SSID=0 which is the RID's translation.
If SSID's are currently being used in the CD table then just update the
S1DSS bits in the STE, remove the master_domain and leave ATS alone.
For iommufd the driver design has a small problem that all the unused CD
table entries are set with V=0 which will generate an event if VFIO
userspace tries to use the CD entry. This patch extends this problem to
include the RID as well if PASID is being used.
For BLOCKED with used PASIDs the
F_STREAM_DISABLED (STRTAB_STE_1_S1DSS_TERMINATE) event is generated on
untagged traffic and a substream CD table entry with V=0 (removed pasid)
will generate C_BAD_CD. Arguably there is no advantage to using S1DSS over
the CD entry 0 with V=0.
As we don't yet support PASID in iommufd this is a problem to resolve
later, possibly by using EPD0 for unused CD table entries instead of V=0,
and not using S1DSS for BLOCKED.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This removes all the notifier de-duplication logic in the driver and
relies on the core code to de-duplicate and allocate only one SVA domain
per mm per smmu instance. This naturally gives a 1:1 relationship between
SVA domain and mmu notifier.
It is a significant simplication of the flow, as we end up with a single
struct arm_smmu_domain for each MM and the invalidation can then be
shifted to properly use the masters list like S1/S2 do.
Remove all of the previous mmu_notifier, bond, shared cd, and cd refcount
logic entirely.
The logic here is tightly wound together with the unusued BTM
support. Since the BTM logic requires holding all the iommu_domains in a
global ASID xarray it conflicts with the design to have a single SVA
domain per PASID, as multiple SMMU instances will need to have different
domains.
Following patches resolve this by making the ASID xarray per-instance
instead of global. However, converting the BTM code over to this
methodology requires many changes.
Thus, since ARM_SMMU_FEAT_BTM is never enabled, remove the parts of the
BTM support for ASID sharing that interact with SVA as well.
A followup series is already working on fully enabling the BTM support,
that requires iommufd's VIOMMU feature to bring in the KVM's VMID as
well. It will come with an already written patch to bring back the ASID
sharing using a per-instance ASID xarray.
https://lore.kernel.org/linux-iommu/20240208151837.35068-1-shameerali.kolothum.thodi@huawei.com/
https://lore.kernel.org/linux-iommu/26-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com/
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fill in the smmu_domain->devices list in the new struct arm_smmu_domain
that SVA allocates. Keep track of every SSID and master that is using the
domain reusing the logic for the RID attach.
This is the first step to making the SVA invalidation follow the same
design as S1/S2 invalidation. At present nothing will read this list.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the SVA domain is a naked struct iommu_domain, allocate a struct
arm_smmu_domain instead.
This is necessary to be able to use the struct arm_master_domain
mechanism.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow creating and managing arm_smmu_mater_domain's with a non-zero SSID
through the arm_smmu_attach_*() family of functions. This triggers ATC
invalidation for the correct SSID in PASID cases and tracks the
per-attachment SSID in the struct arm_smmu_master_domain.
Generalize arm_smmu_attach_remove() to be able to remove SSID's as well by
ensuring the ATC for the PASID is flushed properly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We no longer need a master->sva_enable to control what attaches are
allowed. Instead we can tell if the attach is legal based on the current
configuration of the master.
Keep track of the number of valid CD entries for SSID's in the cd_table
and if the cd_table has been installed in the STE directly so we know what
the configuration is.
The attach logic is then made into:
- SVA bind, check if the CD is installed
- RID attach of S2, block if SSIDs are used
- RID attach of IDENTITY/BLOCKING, block if SSIDs are used
arm_smmu_set_pasid() is already checking if it is possible to setup a CD
entry, at this patch it means the RID path already set a STE pointing at
the CD table.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Prepare to allow a S1 domain to be attached to a PASID as well. Keep track
of the SSID the domain is using on each master in the
arm_smmu_master_domain.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The core code allows the domain to be changed on the fly without a forced
stop in BLOCKED/IDENTITY. In this flow the driver should just continually
maintain the ATS with no change while the STE is updated.
ATS relies on a linked list smmu_domain->devices to keep track of which
masters have the domain programmed, but this list is also used by
arm_smmu_share_asid(), unrelated to ats.
Create two new functions to encapsulate this combined logic:
arm_smmu_attach_prepare()
<caller generates and sets the STE>
arm_smmu_attach_commit()
The two functions can sequence both enabling ATS and disabling across
the STE store. Have every update of the STE use this sequence.
Installing a S1/S2 domain always enables the ATS if the PCIe device
supports it.
The enable flow is now ordered differently to allow it to be hitless:
1) Add the master to the new smmu_domain->devices list
2) Program the STE
3) Enable ATS at PCIe
4) Remove the master from the old smmu_domain
This flow ensures that invalidations to either domain will generate an ATC
invalidation to the device while the STE is being switched. Thus we don't
need to turn off the ATS anymore for correctness.
The disable flow is the reverse:
1) Disable ATS at PCIe
2) Program the STE
3) Invalidate the ATC
4) Remove the master from the old smmu_domain
Move the nr_ats_masters adjustments to be close to the list
manipulations. It is a count of the number of ATS enabled masters
currently in the list. This is stricly before and after the STE/CD are
revised, and done under the list's spin_lock.
This is part of the bigger picture to allow changing the RID domain while
a PASID is in use. If a SVA PASID is relying on ATS to function then
changing the RID domain cannot just temporarily toggle ATS off without
also wrecking the SVA PASID. The new infrastructure here is organized so
that the PASID attach/detach flows will make use of it as well in
following patches.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The next patch will need to store the same master twice (with different
SSIDs), so allocate memory for each list element.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add arm_smmu_set_pasid()/arm_smmu_remove_pasid() which are to be used by
callers that already constructed the arm_smmu_cd they wish to program.
These functions will encapsulate the shared logic to setup a CD entry that
will be shared by SVA and S1 domain cases.
Prior fixes had already moved most of this logic up into
__arm_smmu_sva_bind(), move it to it's final home.
Following patches will relieve some of the remaining SVA restrictions:
- The RID domain is a S1 domain and has already setup the STE to point to
the CD table
- The programmed PASID is the mm_get_enqcmd_pasid()
- Nothing changes while SVA is running (sva_enable)
SVA invalidation will still iterate over the S1 domain's master list,
later patches will resolve that.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This allows the driver the receive the mm and always a device during
allocation. Later patches need this to properly setup the notifier when
the domain is first allocated.
Remove ops->domain_alloc() as SVA was the only remaining purpose.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5cd718286059+79186-smmuv3_newapi_p2b_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240508151611.1444352-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Static checker is complaining about the ASID possibly set uninitialized.
This only happens in case of error and this value would be ignored anyway.
A simple fix would be just to initialize the local variable to zero,
this path will only be reached on the first attach to a domain where
the CD is already initialized to zero.
This avoids having to bloat the function with an error path.
Closes: https://lore.kernel.org/linux-iommu/849e3d77-0a3c-43c4-878d-a0e061c8cd61@moroto.mountain/T/#u
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Fixes: 04905c17f648 ("iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240604185218.2602058-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
into next
|
|
It turns out kconfig has problems ensuring the SMMU module and the KUNIT
module are consistently y/m to allow linking. It will permit KUNIT to be a
module while SMMU is built in.
Also, Fedora apparently enables kunit on production kernels.
So, put the entire kunit in its own module using the
VISIBLE_IF_KUNIT/EXPORT_SYMBOL_IF_KUNIT machinery. This keeps it out of
vmlinus on Fedora and makes the kconfig work in the normal way. There is
no cost if kunit is disabled.
Fixes: 56e1a4cc2588 ("iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry")
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/all/aeea8546-5bce-4c51-b506-5d2008e52fef@leemhuis.info
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/0-v1-24cba6c0f404+2ae-smmu_kunit_module_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This was missed because of the function pointer indirection.
nvidia_smmu_context_fault() is also installed as a irq function, and the
'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain
is embedded at a non-zero offset this causes nvidia_smmu_context_fault()
to miscompute the offset. Fixup the types.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000
[0000000000000120] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1
Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023
Workqueue: events_unbound deferred_probe_work_func
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : nvidia_smmu_context_fault+0x1c/0x158
lr : __free_irq+0x1d4/0x2e8
sp : ffff80008044b6f0
x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970
x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30
x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000
x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff
x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888
x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0
x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c
x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f
x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000
x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057
Call trace:
nvidia_smmu_context_fault+0x1c/0x158
__free_irq+0x1d4/0x2e8
free_irq+0x3c/0x80
devm_free_irq+0x64/0xa8
arm_smmu_domain_free+0xc4/0x158
iommu_domain_free+0x44/0xa0
iommu_deinit_device+0xd0/0xf8
__iommu_group_remove_device+0xcc/0xe0
iommu_bus_notifier+0x64/0xa8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x90
bus_notify+0x44/0x70
device_del+0x264/0x3e8
pci_remove_bus_device+0x84/0x120
pci_remove_root_bus+0x5c/0xc0
dw_pcie_host_deinit+0x38/0xe0
tegra_pcie_config_rp+0xc0/0x1f0
tegra_pcie_dw_probe+0x34c/0x700
platform_probe+0x70/0xe8
really_probe+0xc8/0x3a0
__driver_probe_device+0x84/0x160
driver_probe_device+0x44/0x130
__device_attach_driver+0xc4/0x170
bus_for_each_drv+0x90/0x100
__device_attach+0xa8/0x1c8
device_initial_probe+0x1c/0x30
bus_probe_device+0xb0/0xc0
deferred_probe_work_func+0xbc/0x120
process_one_work+0x194/0x490
worker_thread+0x284/0x3b0
kthread+0xf4/0x108
ret_from_fork+0x10/0x20
Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1)
Cc: stable@vger.kernel.org
Fixes: e0976331ad11 ("iommu/arm-smmu: Pass arm_smmu_domain to internal functions")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Closes: https://lore.kernel.org/all/jto5e3ili4auk6sbzpnojdvhppgwuegir7mpd755anfhwcbkfz@2u5gh7bxb4iv
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v1-24ce064de41f+4ac-nvidia_smmu_fault_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add tests for some of the more common STE update operations that we expect
to see, as well as some artificial STE updates to test the edges of
arm_smmu_write_entry. These also serve as a record of which common
operation is expected to be hitless, and how many syncs they require.
arm_smmu_write_entry implements a generic algorithm that updates an STE/CD
to any other abritrary STE/CD configuration. The update requires a
sequence of write+sync operations with some invariants that must be held
true after each sync. arm_smmu_write_entry lends itself well to
unit-testing since the function's interaction with the STE/CD is already
abstracted by input callbacks that we can hook to introspect into the
sequence of operations. We can use these hooks to guarantee that
invariants are held throughout the entire update operation.
Link: https://lore.kernel.org/r/20240106083617.1173871-3-mshavit@google.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Michael Shavit <mshavit@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/9-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Half the code was living in arm_smmu_domain_finalise_s1(), just move it
here and take the values directly from the pgtbl_ops instead of storing
copies.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull all the calculations for building the CD table entry for a mmu_struct
into arm_smmu_make_sva_cd().
Call it in the two places installing the SVA CD table entry.
Open code the last caller of arm_smmu_update_ctx_desc_devices() and remove
the function.
Remove arm_smmu_write_ctx_desc() since all callers are gone. Add the
locking assertions to arm_smmu_alloc_cd_ptr() since
arm_smmu_update_ctx_desc_devices() was the last problematic caller.
Remove quiet_cd since all users are gone, arm_smmu_make_sva_cd() creates
the same value.
The behavior of quiet_cd changes slightly, the old implementation edited
the CD in place to set CTXDESC_CD_0_TCR_EPD0 assuming it was a SVA CD
entry. This version generates a full CD entry with a 0 TTB0 and relies on
arm_smmu_write_cd_entry() to install it hitlessly.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Avoid arm_smmu_attach_dev() having to undo the changes to the
smmu_domain->devices list, acquire the cdptr earlier so we don't need to
handle that error.
Now there is a clear break in arm_smmu_attach_dev() where all the
prep-work has been done non-disruptively and we commit to making the HW
change, which cannot fail.
This completes transforming arm_smmu_attach_dev() so that it does not
disturb the HW if it fails.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Only the attach callers can perform an allocation for the CD table entry,
the other callers must not do so, they do not have the correct locking and
they cannot sleep. Split up the functions so this is clear.
arm_smmu_get_cd_ptr() will return pointer to a CD table entry without
doing any kind of allocation.
arm_smmu_alloc_cd_ptr() will allocate the table and any required
leaf.
A following patch will add lockdep assertions to arm_smmu_alloc_cd_ptr()
once the restructuring is completed and arm_smmu_alloc_cd_ptr() is never
called in the wrong context.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A cleared entry is all 0's. Make arm_smmu_clear_cd() do this sequence.
If we are clearing an entry and for some reason it is not already
allocated in the CD table then something has gone wrong.
Remove case (5) from arm_smmu_write_ctx_desc().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Introduce arm_smmu_make_s1_cd() to build the CD from the paging S1 domain,
and reorganize all the places programming S1 domain CD table entries to
call it.
Split arm_smmu_update_s1_domain_cd_entry() from
arm_smmu_update_ctx_desc_devices() so that the S1 path has its own call
chain separate from the unrelated SVA path.
arm_smmu_update_s1_domain_cd_entry() only works on S1 domains attached to
RIDs and refreshes all their CDs. Remove case (3) from
arm_smmu_write_ctx_desc() as it is now handled by directly calling
arm_smmu_write_cd_entry().
Remove the forced clear of the CD during S1 domain attach,
arm_smmu_write_cd_entry() will do this automatically if necessary.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
[will: Drop unused arm_smmu_clean_cd_entry() function]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CD table entries and STE's have the same essential programming sequence,
just with different types. Use the new ops indirection to link CD
programming to the common writer.
In a few more patches all CD writers will call an appropriate make
function and then directly call arm_smmu_write_cd_entry().
arm_smmu_write_ctx_desc() will be removed.
Until then lightly tweak arm_smmu_write_ctx_desc() to also use the new
programmer by using the same logic as right now to build the target CD on
the stack, sanitizing it to meet the used rules, and then using the
writer.
Sanitizing is necessary because the writer expects that the currently
programmed CD follows the used rules. Next patches add new make functions
and new direct calls to arm_smmu_write_cd_entry() which will require this.
Signed-off-by: Michael Shavit <mshavit@google.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Prepare to put the CD code into the same mechanism. Add an ops indirection
around all the STE specific code and make the worker functions independent
of the entry content being processed.
get_used and sync ops are provided to hook the correct code.
Signed-off-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v9-5040dc602008+177d7-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The TBU support is now available, so let's allow it to be used on other
platforms that have the Qualcomm SMMU-500 implementation with TBUs. This
will allow the context fault handler to query the TBUs when a context
fault occurs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-7-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The sdm845 platform now supports TBUs, so let's get additional debug
info from the TBUs when a context fault occurs. Implement a custom
context fault handler that does both software + hardware page table
walks and TLB Invalidate All.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-5-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Threaded IRQ handlers run in a less critical context compared to normal
IRQs, so they can perform more complex and time-consuming operations
without causing significant delays in other parts of the kernel.
During a context fault, it might be needed to do more processing and
gather debug information from TBUs in the handler. These operations may
sleep, so add an option to use a threaded IRQ handler in these cases.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-4-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Operating the TBUs (Translation Buffer Units) from Linux on Qualcomm
platforms can help with debugging context faults. To help with that,
the TBUs can run ATOS (Address Translation Operations) to manually
trigger address translation of IOVA to physical address in hardware
and provide more details when a context fault happens.
The driver will control the resources needed by the TBU to allow
running the debug operations such as ATOS, check for outstanding
transactions, do snapshot capture etc.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-3-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If devm_add_action() returns -ENOMEM, then MSIs are allocated but not
not freed on teardown. Use devm_add_action_or_reset() instead to keep
the static analyser happy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Aleksandr Aprelkov <aaprelkov@usergate.com>
Link: https://lore.kernel.org/r/20240403053759.643164-1-aaprelkov@usergate.com
[will: Tweak commit message, remove warning message]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that the BLOCKED and IDENTITY behaviors are managed with their own
domains change to the domain_alloc_paging() op.
The check for using_legacy_binding is now redundant,
arm_smmu_def_domain_type() always returns IOMMU_DOMAIN_IDENTITY for this
mode, so the core code will never attempt to create a DMA domain in the
first place.
Since commit a4fdd9762272 ("iommu: Use flush queue capability") the core
code only passes in IDENTITY/BLOCKED/UNMANAGED/DMA domain types. It will
not pass in IDENTITY or BLOCKED if the global statics exist, so the test
for DMA is also redundant now too.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-3632c65678e0+2f1-smmu_alloc_paging_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Existing remove_dev_pasid() callbacks of the underlying iommu drivers
get the attached domain from the group->pasid_array. However, the domain
stored in group->pasid_array is not always correct in all scenarios.
A wrong domain may result in failure in remove_dev_pasid() callback.
To avoid such problems, it is more reliable to pass the domain to the
remove_dev_pasid() op.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240328122958.83332-3-yi.l.liu@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Instead of passing a naked __le16 * around to represent a CD table entry
wrap it in a "struct arm_smmu_cd" with an array of the correct size. This
makes it much clearer which functions will comprise the "CD API".
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
At this point we know which master we are going to change the PCI config
on, this is the only device we need to invalidate. Switch
arm_smmu_atc_inv_domain() for arm_smmu_atc_inv_master().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SVA code is wired to assume that the SVA is programmed onto the
mm->pasid. The current core code always does this, so it is fine.
Add a check for clarity.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The disable_bypass parameter has been mostly meaningless for a long time
since the introduction of default domains. Its original intent is now
fulfilled by the controls users have over the default domain type, and
its remaining effect in the brief window between Stream Table
initialisation and default domain creation hardly seems worth the
complication. Furthermore, thanks to 2-level Stream Tables, disabling
disable_bypass (there's another reason not to like it right there) has
never guaranteed that any particular StreamID *will* bypass anyway - any
device which might actually care about that wants RMRs - so there's not
really much lost by taking away that option (which has already been
non-default for nearing 6 years now).
As part of this, also remove the weird behaviour where we "successfully"
probe and register a non-functional SMMU if the DT "#iommu-cells"
property is wrong. I have no memory of what possessed me to think that
was a good idea at the time, and by now I suspect it's likely to break
things worse than simply failing probe would.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/ea3ac4cd595a81b5511729601b2f7d4668178438.1712335927.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
STE attributes(NSCFG, PRIVCFG, INSTCFG) use value 0 for "Use Icomming",
for some reason SHCFG doesn't follow that, and it is defined as "0b01".
Currently the driver sets SHCFG to Use Incoming for stage-2 and bypass
domains.
However according to the User Manual (ARM IHI 0070 F.b):
When SMMU_IDR1.ATTR_TYPES_OVR == 0, this field is RES0 and the
incoming Shareability attribute is used.
This patch adds a condition for writing SHCFG to Use incoming to be
compliant with the architecture, and defines ATTR_TYPE_OVR as a new
feature discovered from IDR1.
This also required to propagate the SMMU through some functions args.
There is no need to add similar condition for the newly introduced function
arm_smmu_get_ste_used() as the values of the STE are the same before and
after any transition, so this will not trigger any change. (we already
do the same for the VMID).
Although this is a misconfiguration from the driver, this has been there
for a long time, so probably no HW running Linux is affected by it.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20240215134952.GA690@willie-the-truck/
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240323134658.464743-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
STRTAB_STE_0_V is a CPU value, it needs conversion for sparse to be clean.
The missing annotation was a mistake introduced by splitting the ops out
from the STE writer.
Fixes: 7da51af9125c ("iommu/arm-smmu-v3: Make STE programming independent of the callers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403011441.5WqGrYjp-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-98b23ebb0c84+9f-smmu_cputole_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
|
'x86/amd' and 'core' into next
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216144027.185959-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now that the BLOCKED and IDENTITY behaviors are managed with their own
domains change to the domain_alloc_paging() op.
For now SVA remains using the old interface, eventually it will get its
own op that can pass in the device and mm_struct which will let us have a
sane lifetime for the mmu_notifier.
Call arm_smmu_domain_finalise() early if dev is available.
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/16-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Instead of putting container_of() casts in the internals, use the proper
type in this call chain. This makes it easier to check that the two global
static domains are not leaking into call chains they should not.
Passing the smmu avoids the only caller from having to set it and unset it
in the error path.
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/15-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Consolidate some more code by having release call
arm_smmu_attach_dev_identity/blocked() instead of open coding this.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Moritz Fischer <moritzf@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v6-96275f25c39d+2d4-smmuv3_newapi_p1_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
