| Age | Commit message (Collapse) | Author |
|---|
|
The interconnect driver is (or soon will be) vital to many other
devices, as it's not a given that the bootloader will set up enough
bandwidth for us or that the values we come into are reasonable.
Promote the driver to core_initcall to ensure the consumers (i.e.
most "meaningful" parts of the SoC) can probe without deferrals.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-8-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
For SMD RPM bus scaling to work, we need a pair of sleep-wake clocks.
The variable number of them we previously supported was only a hack
to keep the clocks required for QoS register access, but now that
these are separated, we can leave bus_clks to the actual bus clocks.
In cases where there is no actual bus scaling (such as A0NoC on MSM8996
and GNoC on SDM660 where the HLOS is only supposed to program the QoS
registers and the bus is either static or controlled remotely), allow
for no clock scaling with a boolean property.
Remove all the code related to allowing an arbitrary number of bus_clks,
replace the number by BUS_CLK_MAX (= 2) and guard the bus clock paths
to ensure they are not taken on non-scaling buses.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-6-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Some (but not all) providers (or their specific nodes) require
specific clocks to be turned on before they can be accessed. Failure
to ensure that results in a seemingly random system crash (which
would usually happen at boot with the interconnect driver built-in),
resulting in the platform not booting up properly.
Limit the number of bus_clocks to 2 (which is the maximum that SMD
RPM interconnect supports anyway) and handle non-scaling clocks
separately. Update MSM8996 and SDM660 drivers to make sure they do
not regress with this change.
This unfortunately has to be done in one patch to prevent either
compile errors or broken bisect.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230518195801.2556998-1-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Rename the "clocks" (and _names) fields of qcom_icc_desc to
"bus_clocks" in preparation for introducing handling of clocks that
need to be enabled but not voted on with aggregate frequency.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-1-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Any power domain would already have been attached by the platform bus
code so drop the bogus power domain attach which always succeeds from
probe.
This effectively reverts commit 7de109c0abe9 ("interconnect: icc-rpm:
Add support for bus power domain").
Fixes: 7de109c0abe9 ("interconnect: icc-rpm: Add support for bus power domain")
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # MSM8996 Sony Kagura
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230313084953.24088-3-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The device tree reg starts at BUS_BASE + QoS_OFFSET, but the regmap
configs in the ICC driver had values suggesting the reg started at
BUS_BASE. Shrink them down (where they haven't been already, so for
providers where QoS_OFFSET = 0) to make sure they stay within their
window.
Fixes: 7add937f5222 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Link: https://lore.kernel.org/r/20221210200353.418391-4-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
On eMMC devices the bootloader has no business enabling UFS clocks.
That results in a platform hang and hard reboot when trying to vote
on paths including MASTER_UFS and since sync_state guarantees that
it's done at boot time, this effectively prevents such devices from
booting. Fix that.
Fixes: 7add937f5222 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Link: https://lore.kernel.org/r/20221210200353.418391-3-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Pointers to struct qcom_icc_node (and similar structures) are not
modified, so they can be made const for safety. The contents of struct
qcom_icc_node must stay non-const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220412102623.227607-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
The driver currently uses .is_bimc_node to distinguish device type BIMC
from NOC. Define type for bus/noc devices like what downstream[1] does
to make support for more types easier.
[1] https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/soc/qcom/msm_bus/msm_bus_core.h?h=kernel.lnx.4.19.r22-rel#n46
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20211215002324.1727-2-shawn.guo@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Add a driver for the MSM8996 NoCs. This chip is similar to SDM660 where
some busses are controlled by RPM, while others directly by the AP with
writes to QoS registers.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20211021132329.234942-5-y.oudjana@protonmail.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
