summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2023-02-09Input: i8042 - add Clevo PCX0DX to i8042 quirk tableWerner Sembach
[ Upstream commit 9c445d2637c938a800fcc8b5f0b10e60c94460c7 ] The Clevo PCX0DX/TUXEDO XP1511, need quirks for the keyboard to not be occasionally unresponsive after resume. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20230110134524.553620-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-01Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"Dmitry Torokhov
commit 3c44e2b6cde674797b76e76d3a903a63ce8a18bb upstream. This reverts commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 because it causes loss of keyboard on HP 15-da1xxx. Fixes: ac5408991ea6 ("Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode") Reported-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/824effa5-8b9a-c28a-82bb-9b0ab24623e1@kernel.org Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1206358 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-31Input: wistron_btns - disable on UMLRandy Dunlap
[ Upstream commit b2b80d9dd14cb5b70dc254bddbc4eea932694791 ] The wistron_btns driver calls rtc_cmos_read(), which isn't available with UML builds, so disable this driver on UML. Prevents this build error: ld: drivers/input/misc/wistron_btns.o: in function `poll_bios': wistron_btns.c:(.text+0x4be): undefined reference to `rtc_cmos_read' Fixes: 0bbadafdc49d ("um: allow disabling NO_IOMEM") # v5.14+ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20221130161604.1879-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31Input: elants_i2c - properly handle the reset GPIO when power is offDouglas Anderson
[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ] As can be seen in elants_i2c_power_off(), we want the reset GPIO asserted when power is off. The reset GPIO is active low so we need the reset line logic low when power is off to avoid leakage. We have a problem, though, at probe time. At probe time we haven't powered the regulators on yet but we have: devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); While that _looks_ right, it turns out that it's not. The GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the GPIO to "not asserted". Since this is an active low GPIO that inits it to be high. Let's fix this to properly init the GPIO. Now after both probe and power off the state of the GPIO is consistent (it's "asserted" or level low). Once we fix this, we can see that at power on time we no longer to assert the reset GPIO as the first thing. The reset GPIO is _always_ asserted before powering on. Let's fix powering on to account for this. Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-31Input: joystick - fix Kconfig warning for JOYSTICK_ADCRandy Dunlap
[ Upstream commit 6100a19c4fcfe154dd32f8a8ef4e8c0b1f607c75 ] Fix a Kconfig warning for JOYSTICK_ADC by also selecting IIO_BUFFER. WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - JOYSTICK_ADC [=y] && INPUT [=y] && INPUT_JOYSTICK [=y] && IIO [=y] Fixes: 2c2b364fddd5 ("Input: joystick - add ADC attached joystick driver.") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20221104201238.31628-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()Zhang Xiaoxu
commit 8c9a59939deb4bfafdc451100c03d1e848b4169b upstream. There is a kmemleak when test the raydium_i2c_ts with bpf mock device: unreferenced object 0xffff88812d3675a0 (size 8): comm "python3", pid 349, jiffies 4294741067 (age 95.695s) hex dump (first 8 bytes): 11 0e 10 c0 01 00 04 00 ........ backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff88812d3675c8 (size 8): comm "python3", pid 349, jiffies 4294741070 (age 95.692s) hex dump (first 8 bytes): 22 00 36 2d 81 88 ff ff ".6-.... backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 After BANK_SWITCH command from i2c BUS, no matter success or error happened, the tx_buf should be freed. Fixes: 3b384bd6c3f2 ("Input: raydium_ts_i2c - do not split tx transactions") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Link: https://lore.kernel.org/r/20221202103412.2120169-1-zhangxiaoxu5@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-02Input: i8042 - apply probe defer to more ASUS ZenBook modelsTakashi Iwai
[ Upstream commit 26c263bf1847d4dadba016a0457c4c5f446407bf ] There are yet a few more ASUS ZenBook models that require the deferred probe. At least, there are different ZenBook UX325x and UX425x models. Let's extend the DMI matching table entries for adapting those missing models. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20221108142027.28480-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]Hans de Goede
[ Upstream commit e13757f52496444b994a7ac67b6e517a15d89bbc ] Like on the Acer Switch 10 SW5-012, the Acer Switch V 10 SW5-017's _LID method messes with home- and power-button GPIO IRQ settings, causing an IRQ storm. Add a quirk entry for the Acer Switch V 10 to the dmi_use_low_level_irq[] DMI quirk list, to use low-level IRQs on this model, fixing the IRQ storm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221106215320.67109-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02Input: soc_button_array - add use_low_level_irq module parameterHans de Goede
[ Upstream commit 8e9ada1d0e72b4737df400fe1bba48dc42a68df7 ] It seems that the Windows drivers for the ACPI0011 soc_button_array device use low level triggered IRQs rather then using edge triggering. Some ACPI tables depend on this, directly poking the GPIO controller's registers to clear the trigger type when closing a laptop's/2-in-1's lid and re-instating the trigger when opening the lid again. Linux sets the edge/level on which to trigger to both low+high since it is using edge type IRQs, the ACPI tables then ends up also setting the bit for level IRQs and since both low and high level have been selected by Linux we get an IRQ storm leading to soft lockups. As a workaround for this the soc_button_array already contains a DMI quirk table with device models known to have this issue. Add a module parameter for this so that users can easily test if their device is affected too and so that they can use the module parameter as a workaround. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221106215320.67109-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02Input: goodix - try resetting the controller when no config is setHans de Goede
[ Upstream commit c7e37cc6240767f794678d11704935d49cc81d59 ] On ACPI systems (irq_pin_access_method == IRQ_PIN_ACCESS_ACPI_*) the driver does not reset the controller at probe time, because sometimes the system firmware loads a config and resetting might loose this config. On the Nanote UMPC-01 device OTOH the config is in flash of the controller, the controller needs a reset to load this; and the system firmware does not reset the controller on a cold boot. To fix the Nanote UMPC-01 touchscreen not working on a cold boot, try resetting the controller and then re-reading the config when encountering a config with 0 width/height/max_touch_num value and the controller has not already been reset by goodix_ts_probe(). This should be safe to do in general because normally we should never encounter a config with 0 width/height/max_touch_num. Doing this in general not only avoids the need for a DMI quirk, but also might help other systems. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20221025122930.421377-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI modeAman Dhoot
[ Upstream commit ac5408991ea6b06e29129b4d4861097c4c3e0d59 ] The device works fine in native RMI mode, there is no reason to use legacy PS/2 mode with it. Signed-off-by: Aman Dhoot <amandhoot12@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-26Input: i8042 - fix leaking of platform device on module removalChen Jun
[ Upstream commit 81cd7e8489278d28794e7b272950c3e00c344e44 ] Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload. Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support") Signed-off-by: Chen Jun <chenjun102@huawei.com> Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-26Input: iforce - invert valid length check when fetching device IDsTetsuo Handa
commit b8ebf250997c5fb253582f42bfe98673801ebebd upstream. syzbot is reporting uninitialized value at iforce_init_device() [1], for commit 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer when fetching device IDs") is checking that valid length is shorter than bytes to read. Since iforce_get_id_packet() stores valid length when returning 0, the caller needs to check that valid length is longer than or equals to bytes to read. Reported-by: syzbot <syzbot+4dd880c1184280378821@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer when fetching device IDs") Link: https://lore.kernel.org/r/531fb432-7396-ad37-ecba-3e42e7f56d5c@I-love.SAKURA.ne.jp Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-15Input: xpad - fix wireless 360 controller breaking after suspendCameron Gutman
commit a17b9841152e7f4621619902b347e2cc39c32996 upstream. Suspending and resuming the system can sometimes cause the out URB to get hung after a reset_resume. This causes LED setting and force feedback to break on resume. To avoid this, just drop the reset_resume callback so the USB core rebinds xpad to the wireless pads on resume if a reset happened. A nice side effect of this change is the LED ring on wireless controllers is now set correctly on system resume. Cc: stable@vger.kernel.org Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-15Input: xpad - add supported devices as contributed on githubPavel Rojtberg
commit b382c5e37344883dc97525d05f1f6b788f549985 upstream. This is based on multiple commits at https://github.com/paroj/xpad Cc: stable@vger.kernel.org Signed-off-by: Jasper Poppe <jgpoppe@gmail.com> Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz> Signed-off-by: Ruineka <ruinairas1992@gmail.com> Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com> Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-05Input: melfas_mip4 - fix return value check in mip4_probe()Yang Yingliang
[ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ] devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER), add a minus sign to fix it. Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-05Input: snvs_pwrkey - fix SNVS_HPVIDR1 register addressSebastian Krzyszkowiak
commit e62563db857f81d75c5726a35bc0180bed6d1540 upstream. Both i.MX6 and i.MX8 reference manuals list 0xBF8 as SNVS_HPVIDR1 (chapters 57.9 and 6.4.5 respectively). Without this, trying to read the revision number results in 0 on all revisions, causing the i.MX6 quirk to apply on all platforms, which in turn causes the driver to synthesise power button release events instead of passing the real one as they happen even on platforms like i.MX8 where that's not wanted. Fixes: 1a26c920717a ("Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q") Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/4599101.ElGaqSPkdT@pliszka Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-20Input: goodix - add compatible string for GT1158Jarrah Gosbell
commit 80b9ebd3e478cd41526cbf84f80c3e0eb885d1d3 upstream. Add compatible string for GT1158 missing from the previous patch. Fixes: 425fe4709c76 ("Input: goodix - add support for GT1158") Signed-off-by: Jarrah Gosbell <kernel@undef.tools> Link: https://lore.kernel.org/r/20220813043821.9981-1-kernel@undef.tools Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-20Input: iforce - add support for Boeder Force Feedback WheelGreg Tulli
[ Upstream commit 9c9c71168f7979f3798b61c65b4530fbfbcf19d1 ] Add a new iforce_device entry to support the Boeder Force Feedback Wheel device. Signed-off-by: Greg Tulli <greg.iforce@gmail.com> Link: https://lore.kernel.org/r/3256420-c8ac-31b-8499-3c488a9880fd@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-20Input: goodix - add support for GT1158Ondrej Jirman
[ Upstream commit 425fe4709c76e35f93f4c0e50240f0b61b2a2e54 ] This controller is used by PinePhone and PinePhone Pro. Support for the PinePhone Pro will be added in a later patch set. Signed-off-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Jarrah Gosbell <kernel@undef.tools> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220809091200.290492-1-kernel@undef.tools Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-08Input: rk805-pwrkey - fix module autoloadingPeter Robinson
[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-08Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flagTetsuo Handa
commit 98e01215708b6d416345465c09dce2bd4868c67a upstream. syzbot is reporting hung task at __input_unregister_device() [1], for iforce_close() waiting at wait_event_interruptible() with dev->mutex held is blocking input_disconnect_device() from __input_unregister_device(). It seems that the cause is simply that commit c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device") forgot to call wake_up() after clear_bit(). Fix this problem by introducing a helper that calls clear_bit() followed by wake_up_all(). Reported-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device") Tested-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31Input: i8042 - add additional TUXEDO devices to i8042 quirk tablesWerner Sembach
[ Upstream commit 436d219069628f0f0ed27f606224d4ee02a0ca17 ] A lot of modern Clevo barebones have touchpad and/or keyboard issues after suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use. No negative effects could be observed when setting all four. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220708161005.1251929-2-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31Input: i8042 - add TUXEDO devices to i8042 quirk tablesWerner Sembach
[ Upstream commit a6a87c36165e6791eeaed88025cde270536c3198 ] A lot of modern Clevo barebones have touchpad and/or keyboard issues after suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use. No negative effects could be observed when setting all four. The list is quite massive as neither the TUXEDO nor the Clevo dmi strings have been very consistent historically. I tried to keep the list as short as possible without risking on missing an affected device. This is revision 3. The Clevo N150CU barebone is still removed as it might have problems with the fix and needs further investigations. The SchenkerTechnologiesGmbH System-/Board-Vendor string variations are added. This is now based in the quirk table refactor. This now also includes the additional noaux flag for the NS7xMU. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220629112725.12922-5-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31Input: i8042 - merge quirk tablesWerner Sembach
[ Upstream commit ff946268a0813c35b790dfbe07c3bfaa7bfb869c ] Merge i8042 quirk tables to reduce code duplication for devices that need more than one quirk. Before every quirk had its own table with devices needing that quirk. If a new quirk needed to be added a new table had to be created. When a device needed multiple quirks, it appeared in multiple tables. Now only one table called i8042_dmi_quirk_table exists. In it every device has one entry and required quirks are coded in the .driver_data field of the struct dmi_system_id used by this table. Multiple quirks for one device can be applied by bitwise-or of the new SERIO_QUIRK_* defines. Also align quirkable options with command line parameters and make vendor wide quirks per device overwriteable on a per device basis. The first match is honored while following matches are ignored. So when a vendor wide quirk is defined in the table, a device can inserted before and therefore ignoring the vendor wide define. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220629112725.12922-3-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-31Input: i8042 - move __initconst to fix code styling warningWerner Sembach
[ Upstream commit 95a9916c909f0b1d95e24b4232b4bc38ff755415 ] Move __intconst from before i8042_dmi_laptop_table[] to after it for consistent code styling. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220629112725.12922-2-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25Input: exc3000 - fix return value check of wait_for_completion_timeoutMiaoqian Lin
commit 6bb7144c3fa16a5efb54a8e2aff1817b4168018e upstream. wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case. Fixes: 102feb1ddfd0 ("Input: exc3000 - factor out vendor data request") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220411105828.22140-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-17Input: gscps2 - check return value of ioremap() in gscps2_probe()Xie Shaowen
commit e61b3125a4f036b3c6b87ffd656fc1ab00440ae9 upstream. The function ioremap() in gscps2_probe() can fail, so its return value should be checked. Fixes: 4bdc0d676a643 ("remove ioremap_nocache and devm_ioremap_nocache") Cc: <stable@vger.kernel.org> # v5.6+ Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: Xie Shaowen <studentxswpy@163.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12Input: goodix - try not to touch the reset-pin on x86/ACPI devicesHans de Goede
[ Upstream commit a2fd46cd3dbb83b373ba74f4043f8dae869c65f1 ] Unless the controller is not responding at boot or after suspend/resume, the driver never resets the controller on x86/ACPI platforms. The driver still requesting the reset pin at probe() though in case it needs it. Until now the driver has always requested the reset pin with GPIOD_IN as type. The idea being to put the pin in high-impedance mode to save power until the driver actually wants to issue a reset. But this means that just requesting the pin can cause issues, since requesting it in another mode then GPIOD_ASIS may cause the pinctrl driver to touch the pin settings. We have already had issues before due to a bug in the pinctrl-cherryview.c driver which has been fixed in commit 921daeeca91b ("pinctrl: cherryview: Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOs"). And now it turns out that requesting the reset-pin as GPIOD_IN also stops the touchscreen from working on the GPD P2 max mini-laptop. The behavior of putting the pin in high-impedance mode relies on there being some external pull-up to keep it high and there seems to be no pull-up on the GPD P2 max, causing things to break. This commit fixes this by requesting the reset pin as is when using the x86/ACPI code paths to lookup the GPIOs; and by not dropping it back into input-mode in case the driver does end up issuing a reset for error-recovery. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209061 Fixes: a7d4b171660c ("Input: goodix - add support for getting IRQ + reset GPIOs on Cherry Trail devices") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211206091116.44466-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12Input: goodix - refactor reset handlingHans de Goede
[ Upstream commit 209bda4741f68f102cf2f272227bfc938e387b51 ] Refactor reset handling a bit, change the main reset handler into a new goodix_reset_no_int_sync() helper and add a goodix_reset() wrapper which calls goodix_int_sync() separately. Also push the dev_err() call on reset failure into the goodix_reset_no_int_sync() and goodix_int_sync() functions, so that we don't need to have separate dev_err() calls in all their callers. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-4-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12Input: goodix - add a goodix.h header fileHans de Goede
[ Upstream commit a2233cb7b65a017067e2f2703375ecc930a0ab30 ] Add a goodix.h header file, and move the register definitions, and struct declarations there and add prototypes for various helper functions. This is a preparation patch for adding support for controllers without flash, which need to have their firmware uploaded and need some other special handling too. Since MAINTAINERS needs updating because of this change anyways, also add myself as co-maintainer. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12Input: goodix - change goodix_i2c_write() len parameter type to intHans de Goede
[ Upstream commit 31ae0102a34ed863c7d32b10e768036324991679 ] Change the type of the goodix_i2c_write() len parameter to from 'unsigned' to 'int' to avoid bare use of 'unsigned', changing it to 'int' makes goodix_i2c_write()' prototype consistent with goodix_i2c_read(). Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210920150643.155872-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12Input: cpcap-pwrbutton - handle errors from platform_get_irq()Tang Bin
[ Upstream commit 58ae4004b9c4bb040958cf73986b687a5ea4d85d ] The function cpcap_power_button_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210802121740.8700-1-tangbin@cmss.chinamobile.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-22Input: soc_button_array - also add Lenovo Yoga Tablet2 1051F to ↵Marius Hoch
dmi_use_low_level_irq [ Upstream commit 6ab2e51898cd4343bbdf8587af8ce8fbabddbcb5 ] Commit 223f61b8c5ad ("Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list") added the 1051L to this list already, but the same problem applies to the 1051F. As there are no further 1051 variants (just the F/L), we can just DMI match 1051. Tested on a Lenovo Yoga Tablet2 1051F: Without this patch the home-button stops working after a wakeup from suspend. Signed-off-by: Marius Hoch <mail@mariushoch.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220603120246.3065-1-mail@mariushoch.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flagMathias Nyman
commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream. The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-09Input: stmfts - do not leave device disabled in stmfts_input_openDmitry Torokhov
[ Upstream commit 5f76955ab1e43e5795a9631b22ca4f918a0ae986 ] The commit 26623eea0da3 attempted to deal with potential leak of runtime PM counter when opening the touchscreen device, however it ended up erroneously dropping the counter in the case of successfully enabling the device. Let's address this by using pm_runtime_resume_and_get() and then executing pm_runtime_put_sync() only when we fail to send "sense on" command to the device. Fixes: 26623eea0da3 ("Input: stmfts - fix reference leak in stmfts_input_open") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09Input: sparcspkr - fix refcount leak in bbc_beep_probeMiaoqian Lin
[ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ] of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-09Input: gpio-keys - cancel delayed work only in case of GPIOLad Prabhakar
[ Upstream commit cee409bbba0d1bd3fb73064fb480ff365f453b5d ] gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : __flush_work+0x414/0x470 [ 360.342385] lr : __cancel_work_timer+0x140/0x1b0 [ 360.347065] sp : ffff80000a7fba00 [ 360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000 [ 360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001 [ 360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000 [ 360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48 [ 360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40 [ 360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c [ 360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008 [ 360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080 [ 360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458 [ 360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000 [ 360.422818] Call trace: [ 360.425299] __flush_work+0x414/0x470 [ 360.429012] __cancel_work_timer+0x140/0x1b0 [ 360.433340] cancel_delayed_work_sync+0x10/0x18 [ 360.437931] gpio_keys_quiesce_key+0x28/0x58 [gpio_keys] [ 360.443327] devm_action_release+0x10/0x18 [ 360.447481] release_nodes+0x8c/0x1a0 [ 360.451194] devres_release_all+0x90/0x100 [ 360.455346] device_unbind_cleanup+0x14/0x60 [ 360.459677] device_release_driver_internal+0xe8/0x168 [ 360.464883] driver_detach+0x4c/0x90 [ 360.468509] bus_remove_driver+0x54/0xb0 [ 360.472485] driver_unregister+0x2c/0x58 [ 360.476462] platform_driver_unregister+0x10/0x18 [ 360.481230] gpio_keys_exit+0x14/0x828 [gpio_keys] [ 360.486088] __arm64_sys_delete_module+0x1e0/0x270 [ 360.490945] invoke_syscall+0x40/0xf8 [ 360.494661] el0_svc_common.constprop.3+0xf0/0x110 [ 360.499515] do_el0_svc+0x20/0x78 [ 360.502877] el0_svc+0x48/0xf8 [ 360.505977] el0t_64_sync_handler+0x88/0xb0 [ 360.510216] el0t_64_sync+0x148/0x14c [ 360.513930] irq event stamp: 4306 [ 360.517288] hardirqs last enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0 [ 360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88 [ 360.534204] softirqs last enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0 [ 360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0 [ 360.550591] ---[ end trace 0000000000000000 ]--- Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220524135822.14764-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25Input: ili210x - fix reset timingMarek Vasut
commit e4920d42ce0e9c8aafb7f64b6d9d4ae02161e51e upstream. According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30 "2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum 10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset timings such that T4 is 12ms and T2 is 160ms to fit those figures. This prevents sporadic touch controller start up failures when some systems with at least ILI251x controller boot, without this patch the systems sometimes fail to communicate with the touch controller. Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support") Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25Input: stmfts - fix reference leak in stmfts_input_openZheng Yongjun
[ Upstream commit 26623eea0da3476446909af96c980768df07bbd9 ] pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put_noidle will result in reference leak in stmfts_input_open, so we should fix it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25Input: add bounds checking to input_set_capability()Jeff LaBundy
[ Upstream commit 409353cbe9fe48f6bc196114c442b1cff05a39bc ] Update input_set_capability() to prevent kernel panic in case the event code exceeds the bitmap for the given event type. Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com> Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27Input: omap4-keypad - fix pm_runtime_get_sync() error checkingMiaoqian Lin
[ Upstream commit 81022a170462d38ea10612cb67e8e2c529d58abe ] If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: f77621cc640a ("Input: omap-keypad - dynamically handle register offsets") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"José Expósito
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream. This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40. The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons. In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property: [Precision 7x50 Touchpad] MatchBus=i2c MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD However, because of the change introduced in 37ef4c19b4 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space. In order to avoid breakage on other present or future devices, revert the patch causing the issue. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08Input: zinitix - do not report shadow fingersLinus Walleij
[ Upstream commit e941dc13fd3717122207d74539ab95da07ef797f ] I observed the following problem with the BT404 touch pad running the Phosh UI: When e.g. typing on the virtual keyboard pressing "g" would produce "ggg". After some analysis it turns out the firmware reports that three fingers hit that coordinate at the same time, finger 0, 2 and 4 (of the five available 0,1,2,3,4). DOWN Zinitix-TS 3-0020: finger 0 down (246, 395) Zinitix-TS 3-0020: finger 1 up (0, 0) Zinitix-TS 3-0020: finger 2 down (246, 395) Zinitix-TS 3-0020: finger 3 up (0, 0) Zinitix-TS 3-0020: finger 4 down (246, 395) UP Zinitix-TS 3-0020: finger 0 up (246, 395) Zinitix-TS 3-0020: finger 2 up (246, 395) Zinitix-TS 3-0020: finger 4 up (246, 395) This is one touch and release: i.e. this is all reported on touch (down) and release. There is a field in the struct touch_event called finger_cnt which is actually a bitmask of the fingers active in the event. Rename this field finger_mask as this matches the use contents better, then use for_each_set_bit() to iterate over just the fingers that are actally active. Factor out a finger reporting function zinitix_report_fingers() to handle all fingers. Also be more careful in reporting finger down/up: we were reporting every event with input_mt_report_slot_state(..., true); but this should only be reported on finger down or move, not on finger up, so also add code to check p->sub_status to see what is happening and report correctly. After this my Zinitix BT404 touchscreen report fingers flawlessly. The vendor drive I have notably does not use the "finger_cnt" and contains obviously incorrect code like this: if (touch_dev->touch_info.finger_cnt > MAX_SUPPORTED_FINGER_NUM) touch_dev->touch_info.finger_cnt = MAX_SUPPORTED_FINGER_NUM; As MAX_SUPPORTED_FINGER_NUM is an ordinal and the field is a bitmask this seems quite confused. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220228233017.2270599-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-23Input: aiptek - properly check endpoint typePavel Skripkin
commit 5600f6986628dde8881734090588474f54a540a8 upstream. Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints") Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: samsung-keypad - properly state IOMEM dependencyDavid Gow
commit ba115adf61b36b8c167126425a62b0efc23f72c0 upstream. Make the samsung-keypad driver explicitly depend on CONFIG_HAS_IOMEM, as it calls devm_ioremap(). This prevents compile errors in some configs (e.g, allyesconfig/randconfig under UML): /usr/bin/ld: drivers/input/keyboard/samsung-keypad.o: in function `samsung_keypad_probe': samsung-keypad.c:(.text+0xc60): undefined reference to `devm_ioremap' Signed-off-by: David Gow <davidgow@google.com> Acked-by: anton ivanov <anton.ivanov@cambridgegreys.com> Link: https://lore.kernel.org/r/20220225041727.1902850-1-davidgow@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: elan_i2c - fix regulator enable count imbalance after suspend/resumeHans de Goede
commit 04b7762e37c95d9b965d16bb0e18dbd1fa2e2861 upstream. Before these changes elan_suspend() would only disable the regulator when device_may_wakeup() returns false; whereas elan_resume() would unconditionally enable it, leading to an enable count imbalance when device_may_wakeup() returns true. This triggers the "WARN_ON(regulator->enable_count)" in regulator_put() when the elan_i2c driver gets unbound, this happens e.g. with the hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1. Fix this by making the regulator_enable() call also be conditional on device_may_wakeup() returning false. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()Hans de Goede
commit 81a36d8ce554b82b0a08e2b95d0bd44fcbff339b upstream. elan_disable_power() is called conditionally on suspend, where as elan_enable_power() is always called on resume. This leads to an imbalance in the regulator's enable count. Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power() in preparation of fixing this. No functional changes intended. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com [dtor: consolidate elan_[en|dis]able() into elan_set_power()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: ti_am335x_tsc - fix STEPCONFIG setup for Z2Dario Binacchi
[ Upstream commit 6bfeb6c21e1bdc11c328b7d996d20f0f73c6b9b0 ] The Z2 step configuration doesn't erase the SEL_INP_SWC_3_0 bit-field before setting the ADC channel. This way its value could be corrupted by the ADC channel selected for the Z1 coordinate. Fixes: 8c896308feae ("input: ti_am335x_adc: use only FIFO0 and clean up a little") Signed-off-by: Dario Binacchi <dariobin@libero.it> Link: https://lore.kernel.org/r/20211212125358.14416-3-dariobin@libero.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08Input: ti_am335x_tsc - set ADCREFM for X configurationDario Binacchi
[ Upstream commit 73cca71a903202cddc8279fc76b2da4995da5bea ] As reported by the STEPCONFIG[1-16] registered field descriptions of the TI reference manual, for the ADC "in single ended, SEL_INM_SWC_3_0 must be 1xxx". Unlike the Y and Z coordinates, this bit has not been set for the step configuration registers used to sample the X coordinate. Fixes: 1b8be32e6914 ("Input: add support for TI Touchscreen controller") Signed-off-by: Dario Binacchi <dariobin@libero.it> Link: https://lore.kernel.org/r/20211212125358.14416-2-dariobin@libero.it Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 22:46:30 +0000