summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2015-12-17Input: goodix - add axis swapping and axis inversion supportKarsten Merker
Implement support for the following device-tree and ACPI 5.1 DSD properties in the goodix touchscreen driver: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) These are necessary on tablets which have a display in portrait format while the touchscreen is in landscape format, such as e.g. the MSI Primo 81. Signed-off-by: Karsten Merker <merker@debian.org> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Irina Tirdea <irina.tirdea@intel.com> (with ACPI DSD properties) Tested-by: Aleksei Mamlin <mamlinav@gmail.com> (with device-tree properties) Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_sendIrina Tirdea
Use goodix_i2c_write_u8 instead of i2c_master_send to simplify code. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - add power management supportIrina Tirdea
Implement suspend/resume for goodix driver. The suspend and resume process uses the gpio pins. If the device ACPI/DT information does not declare gpio pins, suspend/resume will not be available for these devices. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - write configuration data to deviceIrina Tirdea
Goodix devices can be configured by writing custom data to the device at init. The configuration data is read with request_firmware from "goodix_<id>_cfg.bin", where <id> is the product id read from the device (e.g.: goodix_911_cfg.bin for Goodix GT911, goodix_9271_cfg.bin for GT9271). The configuration information has a specific format described in the Goodix datasheet. It includes X/Y resolution, maximum supported touch points, interrupt flags, various sensitivity factors and settings for advanced features (like gesture recognition). Before writing the firmware, it is necessary to reset the device. If the device ACPI/DT information does not declare gpio pins (needed for reset), writing the firmware will not be available for these devices. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - reset device at initIrina Tirdea
After power on, it is recommended that the driver resets the device. The reset procedure timing is described in the datasheet and is used at device init (before writing device configuration) and for power management. It is a sequence of setting the interrupt and reset pins high/low at specific timing intervals. This procedure also includes setting the slave address to the one specified in the ACPI/device tree. This is based on Goodix datasheets for GT911 and GT9271 and on Goodix driver gt9xx.c for Android (publicly available in Android kernel trees for various devices). For reset the driver needs to control the interrupt and reset gpio pins (configured through ACPI/device tree). For devices that do not have the gpio pins properly declared, the functionality depending on these pins will not be available, but the device can still be used with basic functionality. For both device tree and ACPI, the interrupt gpio pin configuration is read from the "irq-gpios" property and the reset pin configuration is read from the "reset-gpios" property. For ACPI 5.1, named properties can be specified using the _DSD section. This functionality will not be available for devices that use indexed gpio pins declared in the _CRS section (we need to provide backward compatibility with devices that do not support using the interrupt gpio pin as output). For ACPI, the pins can be specified using ACPI 5.1: Device (STAC) { Name (_HID, "GDIX1001") ... Method (_CRS, 0, Serialized) { Name (RBUF, ResourceTemplate () { I2cSerialBus (0x0014, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\I2C0", 0x00, ResourceConsumer, , ) GpioInt (Edge, ActiveHigh, Exclusive, PullNone, 0x0000, "\\I2C0", 0x00, ResourceConsumer, , ) { // Pin list 0 } GpioIo (Exclusive, PullDown, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\I2C0", 0x00, ResourceConsumer, , ) { 1 } }) Return (RBUF) } Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package (2) {"irq-gpios", Package() {^STAC, 0, 0, 0 }}, Package (2) {"reset-gpios", Package() {^STAC, 1, 0, 0 }}, ... } } Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-17Input: goodix - use actual config length for each device typeIrina Tirdea
Each of the Goodix devices supported by this driver has a fixed size for the configuration information registers. The size varies depending on the device and is specified in the datasheet. Use the proper configuration length as specified in the datasheet for each device model, so we do not read more than the actual size of the configuration registers. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Tested-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-16Input: add touchscreen support for TS-4800Damien Riegel
On this board, the touchscreen, an ads7843, is not handled directly by Linux but by a companion FPGA. This FPGA is memory-mapped and the IP design is very similar to the mk712. This commit adds the support for this IP. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-16Input: add eGalaxTouch serial touchscreen driverBöszörményi Zoltán
There are two EETI touchscreen drivers in the kernel (eeti_ts and egalax_ts) but both are for I2C-connected panels. This is for a different, serial and not multi-touch touchscreen panel. The protocol documentation is at http://www.eeti.com.tw/pdf/Software%20Programming%20Guide_v2.0.pdf Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-11Input: atmel_mxt_ts - add maxtouch to I2C table for module autoloadJavier Martinez Canillas
The Atmel maxtouch DT binding documents that the compatible string for the device is "atmel,maxtouch" and the I2C core always reports a module alias of the form i2c:alias where alias is the compatible string model: $ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent MODALIAS=i2c:maxtouch But there isn't maxtouch entry in the I2C device ID table so when the i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the alias with a module to load: $ modinfo atmel_mxt_ts | grep alias alias: of:N*T*Catmel,maxtouch alias: i2c:mXT224 alias: i2c:atmel_mxt_tp alias: i2c:atmel_mxt_ts alias: i2c:qt602240_ts So add the maxtouch entry to the I2C device ID table to allow the module to be autoloaded when the device is registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-04Input: pixcir_i2c - add support for wake and enable gpiosSander Vermin
On some devices the wake and enable pins of the pixcir touchscreen controller are connected to gpios and these must be controlled by the driver for the device to operate properly. Signed-off-by: Sander Vermin <sander@vermin.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-03Input: wacom_w8001 - split the touch and pen devices into two devicesPeter Hutterer
These devices have a pen device and a touch device through the same serial protocol, split it up into two separate devices like we do for USB Wacom tablets too. Userspace already matches on the device name so we can't drop it completely. Compose the same basename based on capabilities and append the tool type, leading to a name like "Wacom Serial Penabled 2FG Touchscreen Pen". Note that this drops BTN_TOOL_FINGER, it is not needed once the tools are split out (and a touch device with BTN_TOOL_FINGER is interpreted as touchpad by most of userspace). Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-03Input: wacom_w8001 - split pen and touch initialization upPeter Hutterer
This is preparation work for splitting it up for two event nodes. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-03Input: wacom_w8001 - handle touch error case correctlyPeter Hutterer
If a device failed at the pen setup and gets a zero reply from the touch device, we need to return an error. Otherwise we have a device with nothing but a name and the EV_KEY and EV_ABS bits. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-03Input: wacom_w8001 - set BTN_TOOL_DOUBLETAP if we have 2fg supportPeter Hutterer
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-03Input: wacom_w8001 - use __set_bit for evbitsPeter Hutterer
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-02Input: atmel_mxt_ts - add generic platform data for ChromebooksDmitry Torokhov
Apparently people are installing generic Linux distributions not only on Pixels but also on other Chromebooks. Unfortunately on all of them Atmel parts assigned names ATML0000 and ATML0001, and do not carry any other configuration data. So let's create generic instance of platform data that should cover most of them (we assume that they will not be using T100 objects, since with those Google mapped BTN_LEFT onto a different GPIO, so slightly different keymap would be needed, but I think we used parts with T100 on ARM devices where we thankfully have DTS and can describe the devices better). Tested-by: Rich K <rgkirch@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-12-01Input: s3c2410_ts: fix S3C_ADC dependencyArnd Bergmann
S3C_ADC is only available on machines that don't do ARCH_MULTIPLATFORM, so changing the 'select' into 'depends on' here helps us move to ARCH_MULTIPLATFORM without introducing regressions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-19gpio: change member .dev to .parentLinus Walleij
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "An update to the tsc2005 driver that allows it to also support tsc2004 (basically the same controller, but uses i2c instead of spi bus), and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: parkbd - drop bogus __init from parkbd_allocate_serio() Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled Input: tsc2004 - add support for tsc2004 Input: tsc200x-core - rename functions and variables Input: tsc2005 - separate SPI and core functions
2015-11-13Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 4.3 merge window.
2015-11-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Items of note: - evdev users can now limit or mask the kind of events they will receive. This will allow applications such as power manager or network manager to only be woken when user presses special keys such as KEY_POWER or KEY_WIFI and not be bothered with ordinary key presses coming from keyboard - support for FocalTech FT6236 touchscreen controller - support for ROHM BU21023/24 touchscreen controller - edt-ft5x06 touchscreen driver got a face lift and can now be used with FT5506 - support for Google Fiber TV Box remote controls - improvements in xpad driver (with more to come) - several parport-based drivers have been switched to the new device model - other miscellaneous driver improvements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits) HID: hid-gfrm: avoid warning for input_configured API change HID: hid-input: allow input_configured callback return errors Input: evdev - fix bug in checking duplicate clock change request Input: add userio module Input: evdev - add event-mask API Input: snvs_pwrkey - remove duplicated semicolon HID: hid-gfrm: Google Fiber TV Box remote controls Input: e3x0-button - update Kconfig description Input: tegra-kbc - drop use of IRQF_NO_SUSPEND flag Input: tegra-kbc - enable support for the standard "wakeup-source" property Input: xen - check return value of xenbus_printf Input: hp_sdc_rtc - fix y2038 problem in proc_show Input: nomadik-ske-keypad - fix a trivial typo Input: xpad - fix clash of presence handling with LED setting Input: edt-ft5x06 - work around FT5506 firmware bug Input: edt-ft5x06 - add support for FT5506 Input: edt-ft5x06 - add support for different max support points Input: edt-ft5x06 - use max support points to determine how much to read Input: rotary-encoder - add support for quarter-period mode Input: rotary-encoder - use of_property_read_bool ...
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-05Merge tag 'media/v4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates, including: - Lots of improvements at the kABI documentation - Split of Videobuf2 into a common part and a V4L2 specific one - Split of the VB2 tracing events into a separate header file - s5p-mfc got support for Exynos 5433 - v4l2 fixes for 64-bits alignment when running 32 bits userspace on ARM - Added support for SDR radio transmitter at core, vivid and hackrf drivers - Some y2038 fixups - Some improvements at V4L2 colorspace support - saa7164 converted to use the V4L2 core control framework - several new boards additions, cleanups and fixups PS: There are two patches for scripts/kernel-doc that are needed by the documentation patches on Media. Jon is OK on merging those via my tree" * tag 'media/v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (146 commits) [media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK [media] DocBook media: update copyright/version numbers [media] ivtv: Convert to get_user_pages_unlocked() [media] media/v4l2-ctrls: fix setting autocluster to manual with VIDIOC_S_CTRL [media] DocBook media: Fix a typo in encoder cmd [media] DocBook: add SDR specific info to G_MODULATOR / S_MODULATOR [media] DocBook: add SDR specific info to G_TUNER / S_TUNER [media] hackrf: do not set human readable name for formats [media] hackrf: add support for transmitter [media] hackrf: switch to single function which configures everything [media] hackrf: add control for RF amplifier [media] DocBook: add modulator type field [media] v4l: add type field to v4l2_modulator struct [media] DocBook: document SDR transmitter [media] v4l2: add support for SDR transmitter [media] DocBook: document tuner RF gain control [media] v4l2: add RF gain control [media] v4l2: rename V4L2_TUNER_ADC to V4L2_TUNER_SDR [media] media/vivid-osd: fix info leak in ioctl [media] media: videobuf2: Move v4l2-specific stuff to videobuf2-v4l2 ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-11-03Input: tsc2004 - add support for tsc2004Michael Welling
This adds support for the i2c based tsc2004 touchscreen controller. Signed-off-by: Michael Welling <mwelling@ieee.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-03Input: tsc200x-core - rename functions and variablesMichael Welling
The functions, variables, and defines of the new tsc200x-core.c are renamed to tsc200x instead of tsc2005 avoid possible confusion. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-03Input: tsc2005 - separate SPI and core functionsMichael Welling
This patch separates the SPI functionality from core functionality that overlaps with the tsc2004. Prepares kernel for new tsc2004 driver without much redundant code. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-11-03Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 4.3 merge window.
2015-10-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: - a change to the ALPS driver where we had limit the quirk for trackstick handling from being active on all Dells to just a few models - a fix for a build dependency issue in the sur40 driver - a small clock handling fixup in the LPC32xx touchscreen driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - only the Dell Latitude D420/430/620/630 have separate stick button bits Input: sur40 - add dependency on VIDEO_V4L2 Input: lpc32xx_ts - fix warnings caused by enabling unprepared clock
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-20[media] media: videobuf2: Change queue_setup argumentJunghak Sung
Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-18Input: sur40 - add dependency on VIDEO_V4L2Randy Dunlap
Fix build errors due to missing Kconfig dependency. drivers/built-in.o: In function `sur40_disconnect': sur40.c:(.text+0x22be6e): undefined reference to `video_unregister_device' sur40.c:(.text+0x22be77): undefined reference to `v4l2_device_unregister' drivers/built-in.o: In function `sur40_process_video': sur40.c:(.text+0x22c1d4): undefined reference to `v4l2_get_timestamp' drivers/built-in.o: In function `sur40_probe': sur40.c:(.text+0x22ca82): undefined reference to `v4l2_device_register' sur40.c:(.text+0x22cb1a): undefined reference to `v4l2_device_unregister' sur40.c:(.text+0x22cbf7): undefined reference to `video_device_release_empty' sur40.c:(.text+0x22cc53): undefined reference to `__video_register_device' sur40.c:(.text+0x22cc90): undefined reference to `video_unregister_device' drivers/built-in.o: In function `sur40_vidioc_querycap': sur40.c:(.text+0x22ccb0): undefined reference to `video_devdata' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-17Input: lpc32xx_ts - fix warnings caused by enabling unprepared clockVladimir Zapolskiy
If common clock framework is configured, the driver generates a warning, which is fixed by this change: root@devkit3250:~# cat /dev/input/touchscreen0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 720 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: sc16is7xx snd_soc_uda1380 CPU: 0 PID: 720 Comm: cat Not tainted 4.3.0-rc2+ #199 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_setup_tsc+0x18/0xa0) [<>] (lpc32xx_setup_tsc) from [<>] (lpc32xx_ts_open+0x14/0x1c) [<>] (lpc32xx_ts_open) from [<>] (input_open_device+0x74/0xb0) [<>] (input_open_device) from [<>] (evdev_open+0x110/0x16c) [<>] (evdev_open) from [<>] (chrdev_open+0x1b4/0x1dc) [<>] (chrdev_open) from [<>] (do_dentry_open+0x1dc/0x2f4) [<>] (do_dentry_open) from [<>] (vfs_open+0x6c/0x70) [<>] (vfs_open) from [<>] (path_openat+0xb4c/0xddc) [<>] (path_openat) from [<>] (do_filp_open+0x40/0x8c) [<>] (do_filp_open) from [<>] (do_sys_open+0x124/0x1c4) [<>] (do_sys_open) from [<>] (SyS_open+0x2c/0x30) [<>] (SyS_open) from [<>] (ret_fast_syscall+0x0/0x38) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI
2015-10-16Input: edt-ft5x06 - work around FT5506 firmware bugFranklin S Cooper Jr
In the touchscreen controller ISR, reading the tsc starting from register 0x2 causes the tsc to infrequently update the detected finger's x and y coordinate. The irq pin toggles at a fast rate to indicate touch events are happening. However, the tsc on average updates the touch point's x and y value every ~100 ms which is much slower than the advertised rate of 100+ Hz. This leads to multiple reads within this ~100 ms time window returning the same value. Example: X: 10 , Y: 30 X: 10 , Y: 30 X: 10, Y: 30 .. // After 100 ms X: 300, Y: 300 X: 300, y: 300 .. // After 100 ms X: 1743, Y: 621 X: 1743, Y: 621 For some reason if instead of starting to read at register 0x2 you start reading at register 0x0 this issue isn't seen. This seems like a quirk only seen in the EDT FT5506 so to fix this issue simply adjust the code to start reading from 0x0. Technically this isn't wrong so no regressions should be seen with other touchscreen controllers supported by this driver. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-16Input: edt-ft5x06 - add support for FT5506Franklin S Cooper Jr
FT5506 is essentially the same as other FT5x06 devices other than supporting 10 support points. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-16Input: edt-ft5x06 - add support for different max support pointsFranklin S Cooper Jr
Update the code so that the maximum supported points aren't hard coded but can be changed. Set the maximum support points based on the data passed along side the compatible field. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-16Input: edt-ft5x06 - use max support points to determine how much to readFranklin S Cooper Jr
Calculate the amount of data that needs to be read for the specified max number of support points. If the maximum number of support points changes then the amount that is read from the touch screen controller should reflect this. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-13Input: pixcir_i2c_ts - remove wakeirq related code from pixcir driverVignesh R
With commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") wakeirq is managed by i2c-core, so remove wakeirq related code from pixcir_i2c_ts driver. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-10Input: ft6236 - change module license string to match copyright noticeDmitry Torokhov
The copyright/license notice says that the code is licensed under GPL v2 only (not GPL v2+), so let's use proper string in MODULE_LICENSE(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-06Input: ads7846 - correct the value got from SPIAndrey Gelman
According to the touch controller spec, SPI return a 16 bit value, only 12 bits are valid, they are bit[14-3]. The value of MISO and MOSI can be configured when SPI is in idle mode. Currently this touch driver assumes the SPI bus sets the MOSI and MISO in low level when SPI bus is in idle mode. So the bit[15] of the value got from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in high level during the SPI idle mode, the bit[15] of the value get from SPI is always 1. If bit[15] is not masked, we may get the wrong value. Mask the invalid bit to make sure the correct value gets returned. Regardless of the SPI bus idle configuration. Signed-off-by: Andrey Gelman <andrey.gelman@compulab.co.il> Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-06Input: ft6236 - do not explicitly set driver's ownerFengguang Wu
There is no need to explicitly set .owner for the driver, the core will do it for us. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-06Input: edt-ft5x06 - do not call desc_to_gpio for invalid gpiosFranklin S Cooper Jr
Since reset and wake pin are optional the gpio structure for those pins may be null. Therefore, they can't be blindly passed to desc_to_gpio. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-05Input: add support for ROHM BU21023/24 touchscreenYoichi Yuasa
This adds support for ROHM BU21023/24 Dual touch resistive touchscreens. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-05Merge tag 'v4.3-rc4' into nextDmitry Torokhov
Merge with mainline to sync up with changes to parkbd driver.
2015-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for two recent regressions (in Synaptics PS/2 and uinput drivers) and some more driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - fix handling of disabling gesture mode" Input: psmouse - fix data race in __ps2_command Input: elan_i2c - add all valid ic type for i2c/smbus Input: zhenhua - ensure we have BITREVERSE Input: omap4-keypad - fix memory leak Input: serio - fix blocking of parport Input: uinput - fix crash when using ABS events Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF Input: elan_i2c - add ic type 0x03 Input: elan_i2c - don't require known iap version Input: imx6ul_tsc - fix controller name Input: imx6ul_tsc - use the preferred method for kzalloc() Input: imx6ul_tsc - check for negative return value Input: imx6ul_tsc - propagate the errors Input: walkera0701 - fix abs() calculations on 64 bit values Input: mms114 - remove unneded semicolons Input: pm8941-pwrkey - remove unneded semicolon Input: fix typo in MT documentation Input: cyapa - fix address of Gen3 devices in device tree documentation
2015-10-02Input: add support for FocalTech FT6236 touchscreen controllerNoralf Trønnes
This adds support for the FT6x06 and the FT6x36 family of capacitive touch panel controllers, in particular the FT6236. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: cyttsp - use PTR_ERR_OR_ZERO()Javier Martinez Canillas
The PTR_ERR_OR_ZERO() helper function checks if a pointer contains an errno code and returns it or return 0 if that's not the case. Use the helper instead of open coding the same logic in the driver. This was found with make coccicheck that complains with the following warning: drivers/input/touchscreen/cyttsp4_i2c.c:53:1-3: WARNING: PTR_ERR_OR_ZERO can be used Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: ads7846 - use PTR_ERR_OR_ZERO()Javier Martinez Canillas
The PTR_ERR_OR_ZERO() helper function checks if a pointer contains an errno code and returns it or return 0 if that's not the case. Use the helper instead of open coding the same logic in the driver. This was found with make coccicheck that complains with the following warning: drivers/input/touchscreen/ads7846.c:532:1-3: WARNING: PTR_ERR_OR_ZERO can be used Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-02Input: tps6507x-ts - simplify function return logicJavier Martinez Canillas
The invoked function already returns zero on success or a negative errno code so there is no need to open code the logic in the caller. This also fixes the following make coccicheck warning: drivers/input/touchscreen/tps6507x-ts.c:57:5-8: WARNING: end returns can be simplified Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>