summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2021-02-16Input: sur40 - fix an error code in sur40_probe()Dan Carpenter
If v4l2_ctrl_handler_setup() fails then probe() should return an error code instead of returning success. Fixes: cee1e3e2ef39 ("media: add video control handlers using V4L2 control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFkbATXa5fA3xj@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-16Input: elants_i2c - detect enum overflowJosh Poimboeuf
If an enum value were to get added without updating this switch statement, the unreachable() annotation would trigger undefined behavior, causing execution to fall through the end of the function, into the next one. Make the error handling more robust for an unexpected enum value, by doing BUG() instead of unreachable(). Fixes the following objtool warning: drivers/input/touchscreen/elants_i2c.o: warning: objtool: elants_i2c_initialize() falls through to next function elants_i2c_resume() Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/59e2e82d1e40df11ab38874c03556a31c6b2f484.1612974132.git.jpoimboe@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-16Input: zinitix - remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./drivers/input/touchscreen/zinitix.c:164:31-32: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/1612319443-115831-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-02-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Nothing terribly interesting, just a few fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - sync supported devices with fork on GitHub Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table Input: goodix - add support for Goodix GT9286 chip dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC dt-bindings: input: adc-keys: clarify description Input: ili210x - implement pressure reporting for ILI251x Input: i8042 - unbreak Pegatron C15B Input: st1232 - wait until device is ready before reading resolution Input: st1232 - do not read more bytes than needed Input: st1232 - fix off-by-one error in resolution handling
2021-01-28Input: iqs5xx - initialize an uninitialized variableJeff LaBundy
If execution jumps to the err_kfree label, error_bl is evaluated before it is initialized. Fix this by initializing it to zero. Fixes: 2539da6677b6 ("Input: iqs5xx - preserve bootloader errors") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611592500-32209-1-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-26isa: Make the remove callback for isa drivers return voidUwe Kleine-König
The driver core ignores the return value of the remove callback, so don't give isa drivers the chance to provide a value. Adapt all isa_drivers with a remove callbacks accordingly; they all return 0 unconditionally anyhow. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/ Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/ Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/ Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-24Input: iqs5xx - allow device to be a wake-up sourceJeff LaBundy
Avoid placing the device in suspend mode (from which it cannot generate interrupts) if it is defined as a wake-up source. The device is still permitted to enter a low-power sensing mode on its own. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-11-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: iqs5xx - allow more time for ATI to completeJeff LaBundy
After the device is initialized, it runs ATI (calibration) during which it cannot readily respond to I2C communication. To keep the open and close callbacks from writing to the device too soon, the driver waits 100 ms before returning from probe. The vendor reports that ATI may actually take up to 250 ms to run (including margin), so increase the delay accordingly. Update the comments to clarify the reason for the delay as well. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-9-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: iqs5xx - eliminate unnecessary register readJeff LaBundy
Instead of relying on firmware to enable important register fields and performing read-modify-write operations to additionally enable the fields the driver cares about, it's much simpler just to write all of the pertinent fields explicitly. This avoids an unnecessary register read operation at start-up and makes way for the iqs5xx_read_byte() helper to be dropped. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-8-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: iqs5xx - simplify axis setup logicJeff LaBundy
The present implementation manipulates axis swap and inversion fields in the device to more or less duplicate what touchscreen_report_pos() does. The resulting logic is convoluted and difficult to follow. Instead report the maximum X and Y coordinates in earnest as they are read from the device, then let touchscreen_parse_properties() fix the axes up as necessary. Finally, use touchscreen_report_pos() to report the transformed coordinates. Last but not least, the maximum X and Y coordinates are not functions of the number of rows/columns that comprise the touch surface. Either coordinate is simply limited to 1 below what is reported for absolute X or Y coordinates when no fingers are present (0xFFFF). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-7-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: iqs5xx - re-initialize device upon warm resetJeff LaBundy
The device may be inadvertently reset during runtime in the event of ESD strike, etc. To protect against this case, acknowledge the SHOW_RESET interrupt and re-initialize the device. To facilitate this change, expand the range of registers that are read in the interrupt handler to include the system status fields. Also, update the unrelated (but nearby) SUSPEND register field to use the BIT() macro. The remaining register fields are cleaned up in another patch. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-6-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: iqs5xx - accommodate bootloader latencyJeff LaBundy
The bootloader NAK's all I2C communication after the first 64-byte bulk write if the bus frequency is equal to 400 kHz. This prevents the platform from pushing updated firmware to the device. The vendor's USB bootloader programming dongle appears to insert a delay between the "open" command and the first 64-byte bulk write. Adding a similar delay to the driver seems to eliminate the issue. Furthermore, the dongle does not access the bootloader immediately after powering up the device. Follow suit by adding a delay before the "open" command to avoid wasted retries at 400 kHz. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-4-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: iqs5xx - preserve bootloader errorsJeff LaBundy
After user space writes the fw_file attribute to push new firmware to the device, the driver calls iqs5xx_dev_init() to re-initialize the device with the updated firmware or recover the device in case the update failed. In the case of the latter, however, iqs5xx_fw_file_write() returns zero (success) so long as iqs5xx_dev_init() does not fail, and any error encountered during the update process is lost. Solve this by saving the error before calling iqs5xx_dev_init(). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-3-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: iqs5xx - minor cosmetic improvementsJeff LaBundy
Copyrights are generally followed by the name of a person or a company (i.e. the copyright holder) but that was not done here. Fix this by squashing the 'copyright' and 'author' lines. Also, trim some leading whitespace ahead of the parameters for the fw_file_store() function and re-align them for readability. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-2-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-24Input: elants_i2c - add support for eKTF3624Michał Mirosław
Add ELAN KTF3624 touchscreen support to the elants_i2c driver. The eKTF3624 TS is found on a series of ASUS Transformer tablet devices, Nexus 7 tablet and etc. The firmware interface of eKTF3624 is nearly identical to eKTH3500, which is already supported by the driver. The minor differences of the firmware interface are now handled by the driver. The eKTF3624 support was tested on ASUS Transformer TF700T, TF300T and Nexus 7 tablets. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210124195414.27333-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-20Input: ads7846 - convert to one messageOleksij Rempel
Convert multiple full duplex transfers in to a single transfer to reduce CPU load. Current driver version support following filtering modes: - ads7846_no_filter() - not filtered - ads7846_debounce_filter() - driver specific debounce filter - pdata->filter - platform specific debounce filter (do any platform provides such filter?) Without filter this HW is not really usable, since the physic of resistive touchscreen can provide some bounce effects. With driver internal filter, we have constant amount of retries + debounce retries if some anomaly was detected. High amount of tiny SPI transfers is the primer reason of high CPU load and interrupt frequency. This patch create one SPI transfer with all fields and not optional retires. If bounce anomaly was detected, we will make more transfer if needed. Without this patch, we will get about 10% CPU load on iMX6S on pen-down event. For example by holding stylus on the screen. With this patch, depending in the amount of retries, the CPU load will be 1% with "ti,debounce-rep = <3>". One buffer transfer allows us to use PIO FIFO or DMA engine, depending on the platform. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201110085041.16303-3-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-19Input: stmpe-ts - add description for 'prop' struct memberLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/stmpe-ts.c:82: warning: Function parameter or member 'prop' not described in 'stmpe_touch' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210114152323.2382283-6-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-19Input: surface3_spi - remove set but unused variable 'timestamp'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/surface3_spi.c: In function ‘surface3_spi_process_touch’: drivers/input/touchscreen/surface3_spi.c:97:6: warning: variable ‘timestamp’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20210114152323.2382283-5-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-19Input: usbtouchscreen - actually check return value of usb_submit_urb()Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/usbtouchscreen.c: In function ‘nexio_read_data’: drivers/input/touchscreen/usbtouchscreen.c:1052:50: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210114152323.2382283-4-lee.jones@linaro.org [dtor: log error code as well] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-19Input: melfas_mip4 - mark a bunch of variables as __always_unusedLee Jones
Dmitry requested to keep these around for the purposes of documentation. Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/melfas_mip4.c: In function ‘mip4_report_touch’: drivers/input/touchscreen/melfas_mip4.c:474:5: warning: variable ‘size’ set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/melfas_mip4.c:472:5: warning: variable ‘pressure_stage’ set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/melfas_mip4.c:469:7: warning: variable ‘palm’ set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/melfas_mip4.c:468:7: warning: variable ‘hover’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210114152323.2382283-3-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-09Input: goodix - add support for Goodix GT9286 chipAngeloGioacchino Del Regno
The Goodix GT9286 is a capacitive touch sensor IC based on GT1x. This chip can be found on a number of smartphones, including the F(x)tec Pro 1 and the Elephone U. This has been tested on F(x)Tec Pro1 (MSM8998). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109135512.149032-2-angelogioacchino.delregno@somainline.org Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-03Input: ili210x - implement pressure reporting for ILI251xMarek Vasut
The ILI251x seems to report pressure information in the 5th byte of each per-finger touch data element. On the available hardware, this information has the values ranging from 0x0 to 0xa, which is also matching the downstream example code. Report pressure information on the ILI251x. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20201224071238.160098-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-01Input: st1232 - wait until device is ready before reading resolutionGeert Uytterhoeven
According to the st1232 datasheet, the host has to wait for the device to change into Normal state before accessing registers other than the Status Register. If the reset GPIO is wired, the device is powered on during driver probe, just before reading the resolution. However, the latter may happen before the device is ready, leading to a probe failure: st1232-ts 1-0055: Failed to read resolution: -6 Fix this by waiting until the device is ready, by trying to read the Status Register until it indicates so, or until timeout. On Armadillo 800 EVA, typically the first read fails with an I2C transfer error, while the second read indicates the device is ready. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-4-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-01Input: st1232 - do not read more bytes than neededGeert Uytterhoeven
st1232_ts_read_data() already reads ts->read_buf_len bytes (8 or 20 bytes) from the touchscreen controller. This was fine when it was used to read touch point coordinates only, but is overkill for reading the touchscreen resolution, which just needs 3 bytes. Optimize transfers by passing the wanted number of bytes. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-3-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-01Input: st1232 - fix off-by-one error in resolution handlingGeert Uytterhoeven
Before, the maximum coordinates were fixed to (799, 479) or (319, 479), depending on touchscreen controller type. The driver was changed to read the actual values from the touchscreen controller, but did not take into account the returned values are not the maximum coordinates, but the touchscreen resolution (e.g. 800 and 480). Fix this by subtracting 1. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-2-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-15Input: raydium_ts_i2c - do not send zero lengthjeffrey.lin
Add default write command package to prevent i2c quirk error of zero data length as Raydium touch firmware update is executed. Signed-off-by: jeffrey.lin <jeffrey.lin@rad-ic.com> Link: https://lore.kernel.org/r/1608031217-7247-1-git-send-email-jeffrey.lin@raydium.corp-partner.google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...
2020-12-15Merge tag 'spi-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The big change this release has been some excellent work from Lukas Wunner which closes a bunch of holes in the cleanup paths for drivers, mainly introduced as a result of devm conversions causing bad interactions with the support SPI has for allocating the bus and driver data together. Together with some of the other work done it feels like we've turned the corner on several long standing pain points with the API. Summary: - Many cleanups around probe/remove and error handling from Lukas Wunner and Uwe Kleine-König, and further fixes around PM from Zhang Qilong. - Provide a mask for which bits of the mode can safely be configured by drivers and use that to fix an issue with the ADS7846 driver. - Documentation of the expected interactions between SPI and GPIO level chip select polarity configuration from H. Nikolaus Schaller, hopefully we're pretty much at the end of sorting out the interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus Walleij for this. - DMA support for Allwinner sun6i controllers. - Support for Canaan K210 Designware implementations and Intel Adler Lake" * tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits) spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors spi: Limit the spi device max speed to controller's max speed spi: spi-geni-qcom: Use the new method of gpio CS control platform/chrome: cros_ec_spi: Drop bits_per_word assignment platform/chrome: cros_ec_spi: Don't overwrite spi::mode spi: dw: Add support for the Canaan K210 SoC SPI spi: dw: Add support for 32-bits max xfer size dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller spi: Update DT binding docs to support SiFive FU740 SoC spi: atmel-quadspi: Fix use-after-free on unbind spi: npcm-fiu: Disable clock in probe error path spi: ar934x: Don't leak SPI master in probe error path spi: mt7621: Don't leak SPI master in probe error path spi: mt7621: Disable clock in probe error path media: netup_unidvb: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: gpio: Don't leak SPI master in probe error path spi: spi-mtk-nor: Don't leak SPI master in probe error path spi: mxic: Don't leak SPI master in probe error path ...
2020-12-14Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 5.11 merge window.
2020-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for cm109 stomping on its own control URB if it tries to toggle buzzer immediately after userspace opens input device (found by syzcaller) - another fix for Raydium touchscreens that do not like splitting command transfers - quirks for i8042, soc_button_array, and goodix drivers to make them work better with certain hardware. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - add upside-down quirk for Teclast X98 Pro tablet Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list Input: raydium_ts_i2c - do not split tx transactions
2020-12-11Input: stmpe - add axis inversion and swapping capabilityStefan Riedmueller
Make use of generic touchscreen_properties structure to add axis inversion and swapping capabilities. It's configurable via devicetree properties: touchscreen-inverted-x touchscreen-inverted-y touchscreen-swapped-x-y Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Link: https://lore.kernel.org/r/20200922093903.157232-1-s.riedmueller@phytec.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: goodix - add upside-down quirk for Teclast X98 Pro tabletSimon Beginn
The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn <linux@simonmicro.de> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: elants - document some registers and valuesMichał Mirosław
Add information found in downstream kernels, to make the code less magic. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/728fff020bc92be10d84cc2a7ea8af6fd99af96c.1607669375.git.mirq-linux@rere.qmqm.pl Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: atmel_mxt_ts - simplify the return expression of ↵Zheng Yongjun
mxt_send_bootloader_cmd() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201210135943.1612-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: ad7877 - use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Link: https://lore.kernel.org/r/20200228104508.15564-1-sergiu.cuciurean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Input: edt-ft5x06 - consolidate handling of number of electrodesDmitry Torokhov
Instead of special-casing retrieval of number of X/Y electrodes based on the firmware, let's select default values and mark registers as non-existent on firmwares that do not support this operation. Also mark "report rate" register as non-existent for generic firmwares as having it set to 0 does not make sense. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Simon Budig <simon.budig@kernelconcepts.de> Link: https://lore.kernel.org/r/X9FZFs3NZADoIhhH@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-10Merge series "spi: spi-geni-qcom: Use gpio descriptors for CS" from Stephen ↵Mark Brown
Boyd <swboyd@chromium.org>: Collected patches from the two series below and associated tags so they can be merged in one pile through the spi tree. Merry December! SPI: https://lore.kernel.org/r/20201202214935.1114381-1-swboyd@chromium.org cros-ec: https://lore.kernel.org/r/20201203011649.1405292-1-swboyd@chromium.org Cc: Akash Asthana <akashast@codeaurora.org> Cc: Simon Glass <sjg@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Stephen Boyd (3): platform/chrome: cros_ec_spi: Don't overwrite spi::mode platform/chrome: cros_ec_spi: Drop bits_per_word assignment spi: spi-geni-qcom: Use the new method of gpio CS control drivers/platform/chrome/cros_ec_spi.c | 2 -- drivers/spi/spi-geni-qcom.c | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) base-commit: b65054597872ce3aefbc6a666385eabdf9e288da -- https://chromeos.dev
2020-12-06Input: raydium_ts_i2c - do not split tx transactionsFurquan Shaikh
Raydium device does not like splitting of tx transactions into multiple messages - one for the register address and one for the actual data. This results in incorrect behavior on the device side. This change updates raydium_i2c_read and raydium_i2c_write to create i2c_msg arrays separately and passes those arrays into raydium_i2c_xfer which decides based on the address whether the bank switch command should be sent. The bank switch header is still added by raydium_i2c_read and raydium_i2c_write to ensure that all these operations are performed as part of a single I2C transfer. It guarantees that no other transactions are initiated to any other device on the same bus after the bank switch command is sent. Signed-off-by: Furquan Shaikh <furquan@google.com> Link: https://lore.kernel.org/r/20201205005941.1427643-1-furquan@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for 'RETRIGEN' handling in Atmel touch controllers that was causing lost interrupts on systems using edge-triggered interrupts, a quirk for i8042 driver, and a couple more fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - fix lost interrupts Input: xpad - support Ardwiino Controllers Input: i8042 - add ByteSpeed touchpad to noloop table Input: i8042 - fix error return code in i8042_setup_aux() Input: soc_button_array - add missing include
2020-12-02Input: use input_device_enabled()Andrzej Pietrasiewicz
Use the newly added helper in relevant input drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-01Input: atmel_mxt_ts - fix lost interruptsLinus Walleij
After commit 74d905d2d38a devices requiring the workaround for edge triggered interrupts stopped working. The hardware needs the quirk to be used before even proceeding to check if the quirk is needed because mxt_acquire_irq() is called before mxt_check_retrigen() is called and at this point pending IRQs need to be checked, and if the workaround is not active, all interrupts will be lost from this point. Solve this by switching the calls around. Reported-by: Andre Müller <andre.muller@web.de> Tested-by: Andre Müller <andre.muller@web.de> Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Fixes: 74d905d2d38a ("Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201201123026.1416743-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: goodix - fix misspelling of 'ctx'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/goodix.c:1168: warning: Function parameter or member 'ctx' not described in 'goodix_config_cb' drivers/input/touchscreen/goodix.c:1168: warning: Excess function parameter 'ts' description in 'goodix_config_cb' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-14-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: wm97xx-ts - provide missing description for 'status'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/wm97xx-core.c:204: warning: Function parameter or member 'status' not described in 'wm97xx_set_gpio' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20201112110204.2083435-12-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: surface3_spi - fix naming issue with 'surface3_spi_get_gpio_config's ↵Lee Jones
header Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/surface3_spi.c: In function ‘surface3_spi_process_touch’: drivers/input/touchscreen/surface3_spi.c:97:6: warning: variable ‘timestamp’ set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/surface3_spi.c:225: warning: Function parameter or member 'data' not described in 'surface3_spi_get_gpio_config' drivers/input/touchscreen/surface3_spi.c:225: warning: Excess function parameter 'ts' description in 'surface3_spi_get_gpio_config' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-11-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-19Input: goodix - provide some missing function parameter descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/goodix.c:569: warning: Function parameter or member 'len' not described in 'goodix_check_cfg' drivers/input/touchscreen/goodix.c:587: warning: Function parameter or member 'len' not described in 'goodix_send_cfg' drivers/input/touchscreen/goodix.c:1165: warning: Function parameter or member 'cfg' not described in 'goodix_config_cb' drivers/input/touchscreen/goodix.c:1165: warning: Function parameter or member 'ctx' not described in 'goodix_config_cb' drivers/input/touchscreen/goodix.c:1165: warning: Excess function parameter 'ts' description in 'goodix_config_cb' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112110204.2083435-5-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: atmel_mxt_ts - support regulator suppliesLinus Walleij
This adds the code for the Atmel touchscreens such as mXT224 to obtain power regulators for the supply voltages AVDD and VDD. On mobile phones such as Samsung GT-I8190 (Golden) this is needed to explicitly bring power online. We just enable the regulators at probe() and disable them at remove() or in the error path for now. As regulators are naturally stubbed if not available, this should have no impact on existing systems. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201104153032.1387747-3-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: atmel_mxt_ts - fix up inverted RESET handlerLinus Walleij
This driver uses GPIO descriptors to drive the touchscreen RESET line. In the existing device trees this has in conflict with intution been flagged as GPIO_ACTIVE_HIGH and the driver then applies the reverse action by driving the line low (setting to 0) to enter reset state and driving the line high (setting to 1) to get out of reset state. The correct way to handle active low GPIO lines is to provide the GPIO_ACTIVE_LOW in the device tree (thus properly describing the hardware) and letting the GPIO framework invert the assertion (driving high) to a low level and vice versa. This is considered a bug since the device trees are incorrectly mis-specifying the line as active high. Fix the driver and all device trees specifying a reset line. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201104153032.1387747-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Merge tag 'v5.9' into nextDmitry Torokhov
Sync up with mainline to bring in the latest DTS files.
2020-11-17Input: ads7846 - drop unneeded asm/irq.h includeDmitry Torokhov
This is essentially a revert of: 3ac8bf077d0f ("[PATCH] ads7846: sparc32 warning fix") By now enable_irq() and disable_irq() are properly defined in linux/interrupt.h and we do not need to pull in architecture-specific bits. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-17Input: ads7846 - fix unaligned access on 7845Dmitry Torokhov
req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:52:25 +0000