| Age | Commit message (Collapse) | Author |
|---|
|
Extend the dbg log messages (e.g. rxe_dbg_xxx) to include
err and info types. rxe.c is modified to use these new log
messages as examples.
Link: https://lore.kernel.org/r/20230303221623.8053-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace the name rxe_dbg with rxe_dbg_dev which better matches
the remaining rxe_dbg_xxx macros for debug messages with a
rxe device parameter. Reuse the name rxe_dbg for debug messages
which do not have a rxe device parameter.
Link: https://lore.kernel.org/r/20230303221623.8053-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
'exists' looks like a boolean. This patch replaces it by the
normal name used for the rxe device, 'rxe', which should be a
little less confusing. The second rxe_dbg() message is
incorrect since rxe is known to be NULL and this will cause a
seg fault if this message were ever sent. Replace it by pr_debug
for the moment.
Fixes: c6aba5ea0055 ("RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe.c")
Link: https://lore.kernel.org/r/20230303221623.8053-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is no need to check 'rdi->qp_dev' for NULL. The field 'qp_dev'
is created in rvt_register_device() which will fail if the 'qp_dev'
allocation fails in rvt_driver_qp_init(). Overwise this pointer
doesn't changed and passed to rvt_qp_exit() by the next step.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Link: https://lore.kernel.org/r/20230303124408.16685-1-n.petrova@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The "cplen" result used by the memcpy() into struct rvt_swqe "wqe" may
be sized to 80 for struct rvt_ud_wr (which is member "ud_wr", not "wr"
which is only 40 bytes in size). Change the destination union member so
the compiler can use the correct bounds check.
struct rvt_swqe {
union {
struct ib_send_wr wr; /* don't use wr.sg_list */
struct rvt_ud_wr ud_wr;
...
};
...
};
Silences false positive memcpy() run-time warning:
memcpy: detected field-spanning write (size 80) of single field "&wqe->wr" at drivers/infiniband/sw/rdmavt/qp.c:2043 (size 40)
Reported-by: Zhang Yi <yizhan@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216561
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230218185701.never.779-kees@kernel.org
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When seg is equal to MAX_ARRAY, the loop should break, otherwise
it will result in out of range access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://lore.kernel.org/r/20230227091751.589612-1-d.dulov@aladdin.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Quite a small cycle this time, even with the rc8. I suppose everyone
went to sleep over xmas.
- Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw,
mana
- inline CQE support for hns
- Have mlx5 display device error codes
- Pinned DMABUF support for irdma
- Continued rxe cleanups, particularly converting the MRs to use
xarray
- Improvements to what can be cached in the mlx5 mkey cache"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits)
IB/mlx5: Extend debug control for CC parameters
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
RDMA/irdma: Add support for dmabuf pin memory regions
RDMA/mlx5: Use query_special_contexts for mkeys
net/mlx5e: Use query_special_contexts for mkeys
net/mlx5: Change define name for 0x100 lkey value
net/mlx5: Expose bits for querying special mkeys
RDMA/rxe: Fix missing memory barriers in rxe_queue.h
RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet
RDMA/rxe: Remove rxe_alloc()
RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
Subject: RDMA/rxe: Handle zero length rdma
iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
RDMA/mlx5: Use rdma_umem_for_each_dma_block()
RDMA/umem: Remove unused 'work' member from struct ib_umem
RDMA/irdma: Cap MSIX used to online CPUs + 1
RDMA/mlx5: Check reg_create() create for errors
RDMA/restrack: Correct spelling
RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
...
|
|
An earlier patch which introduced smp_load_acquire/smp_store_release
into rxe_queue.h incorrectly assumed that surrounding spin-locks in
rxe_verbs.c around queue updates for kernel ulps was sufficient to
protect the passing of data through the queues between the ulp and
the rxe tasklets. But this was incorrect. The typical sequence was
ulp rxe requester tasklet
------------------------ ---------------------
spin_lock_irqsave() wqe = queue_head(queue)
if (!queue_full(q)) { if (!wqe)
spin_unlock_irqrestore return;
return -ENOMEM
} <process wqe>
wqe = queue_producer_addr(q)
<fill in wqe> queue_advance_consumer(queue)
queue_advance_producer(q)
spin_unlock_irqrestore()
queue_head() calls queue_empty() which calls smp_load_acquire()
For user space apps queue_advance_producer() calls smp_store_release()
so that there is a memory barrier between the producer and the
consumer but for kernel ulps queue_advance_produce() just incremented
the producer index because the lock function is a release function.
But to work the barrier has to come between filling in the wqe and
updating the producer index. This patch adds the missing barriers.
It also changes the enum names for the ulp queue types to
QUEUE_TYPE_FROM/TO_ULP instead of QUEUE_TYPE_TO/FROM_DRIVER
which is very ambiguous. This bug is suspected as the cause of very
rare lockups in a very high scale storage application. It is a bug
in any case and should be corrected.
Fixes: 0a67c46d2e99 ("RDMA/rxe: Protect user space index loads/stores")
Link: https://lore.kernel.org/r/20230214071053.5395-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently all the object types in the rxe driver are allocated in
rdma-core except for MRs. By moving tha kzalloc() call outside of
the pool code the rxe_alloc() subroutine can be eliminated and code
checking for MR as a special case can be removed.
This patch moves the kzalloc() and kfree_rcu() calls into the mr
registration and destruction verbs. It removes that code from
rxe_pool.c including the rxe_alloc() subroutine which is no longer
used.
Link: https://lore.kernel.org/r/20230213225551.12437-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com>
Reviewed-by: Devesh Sharma <devesh.s.sharma@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently the rxe driver does not handle all cases of zero length rdma
operations correctly. The client does not have to provide an rkey for zero
length RDMA read or write operations so the rkey provided may be invalid
and should not be used to lookup an mr.
This patch corrects the driver to ignore the provided rkey if the reth
length is zero for read or write operations and make sure to set the mr to
NULL. In read_reply() if length is zero rxe_recheck_mr() is not
called. Warnings are added in the routines in rxe_mr.c to catch NULL MRs
when the length is non-zero.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230202044240.6304-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
To avoid racing with other user memory reservations, immediately
account full amount of pages to be pinned.
Fixes: 2251334dcac9 ("rdma/siw: application buffer management")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20230202101000.402990-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
418e53401e47 ("ice: move devlink port creation/deletion")
643ef23bd9dd ("ice: Introduce local var for readability")
https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/
drivers/net/ethernet/engleder/tsnep_main.c
3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues")
25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/
net/netfilter/nf_conntrack_proto_sctp.c
13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths")
f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/
https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace struct rxe-phys_buf and struct rxe_map by struct xarray
in rxe_verbs.h. This allows using rcu locking on reads for
the memory maps stored in each mr.
This is based off of a sketch of a patch from Jason Gunthorpe in the
link below. Some changes were needed to make this work. It applies
cleanly to the current for-next and passes the pyverbs, perftest
and the same blktests test cases which run today.
Link: https://lore.kernel.org/r/20230119235936.19728-7-rpearsonhpe@gmail.com
Link: https://lore.kernel.org/linux-rdma/Y3gvZr6%2FNCii9Avy@nvidia.com/
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Cleanup usage of mr->page_shift and mr->page_mask and introduce
an extractor for mr->ibmr.page_size. Normal usage in the kernel
has page_mask masking out offset in page rather than masking out
the page number. The rxe driver had reversed that which was confusing.
Implicitly there can be a per mr page_size which was not uniformly
supported.
Link: https://lore.kernel.org/r/20230119235936.19728-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Isolate mr specific code from atomic_write_reply() in rxe_resp.c into
a subroutine rxe_mr_do_atomic_write() in rxe_mr.c.
Check length for atomic write operation.
Make iova_to_vaddr() static.
Link: https://lore.kernel.org/r/20230119235936.19728-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Isolate mr specific code from atomic_reply() in rxe_resp.c into
a subroutine rxe_mr_do_atomic_op() in rxe_mr.c.
Minor cleanups to rxe_check_range() and iova_to_vaddr().
Move enum resp_state to rxe.h
Link: https://lore.kernel.org/r/20230119235936.19728-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move rxe_map_mr_sg() to rxe_mr.c where it makes a little more sense.
Link: https://lore.kernel.org/r/20230119235936.19728-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove blank lines and replace EFAULT by EINVAL when an invalid
mr type is used.
Link: https://lore.kernel.org/r/20230119235936.19728-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If you create MRs more than 0x10000 times after loading the module,
responder starts to reply NAKs for RDMA/Atomic operations because of rkey
violation detected in check_rkey(). The root cause is that rkeys are
incremented each time a new MR is created and the value overflows into the
range reserved for MWs.
This commit also increases the value of RXE_MAX_MW that has been limited
unlike other parameters.
Fixes: 0994a1bcd5f7 ("RDMA/rxe: Bump up default maximum values used via uverbs")
Link: https://lore.kernel.org/r/20221220080848.253785-2-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ibv_query_device() has reported incorrect device attributes, which are
actually not used by the device. Make the constants correspond with the
attributes shown to users.
Fixes: 3ccffe8abf2f ("RDMA/rxe: Move max_elem into rxe_type_info")
Fixes: 3225717f6dfa ("RDMA/rxe: Replace red-black trees by xarrays")
Link: https://lore.kernel.org/r/20221220080848.253785-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Fix two build warnings on 32 bit platforms
It seems the linux-next CI and 0-day bot are not testing enough 32 bit
configurations, as soon as you merged the rdma pull request there were
two instant reports of warnings on these sytems that I would have
thought should have been covered by time in linux-next
Anyhow, here are the fixes so people don't hit problems with -Werror"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix pointer cast warning
RDMA/rxe: Fix compile warnings on 32-bit
|
|
The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:
drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
32 | return virt_to_page((void *)paddr);
| ^
Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.
Fixes: 0d1b756acf60 ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move the conditional code into a function, with two varients so it is
harder to make these kinds of mistakes.
drivers/infiniband/sw/rxe/rxe_resp.c: In function 'atomic_write_reply':
drivers/infiniband/sw/rxe/rxe_resp.c:794:13: error: unused variable 'payload' [-Werror=unused-variable]
794 | int payload = payload_size(pkt);
| ^~~~~~~
drivers/infiniband/sw/rxe/rxe_resp.c:793:24: error: unused variable 'mr' [-Werror=unused-variable]
793 | struct rxe_mr *mr = qp->resp.mr;
| ^~
drivers/infiniband/sw/rxe/rxe_resp.c:791:19: error: unused variable 'dst' [-Werror=unused-variable]
791 | u64 src, *dst;
| ^~~
drivers/infiniband/sw/rxe/rxe_resp.c:791:13: error: unused variable 'src' [-Werror=unused-variable]
791 | u64 src, *dst;
Fixes: 034e285f8b99 ("RDMA/rxe: Make responder support atomic write on RC service")
Link: https://lore.kernel.org/linux-rdma/Y5s+EVE7eLWQqOwv@nvidia.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual size of updates, a new driver, and most of the bulk focusing on
rxe:
- Usual typos, style, and language updates
- Driver updates for mlx5, irdma, siw, rts, srp, hfi1, hns, erdma,
mlx4, srp
- Lots of RXE updates:
* Improve reply error handling for bad MR operations
* Code tidying
* Debug printing uses common loggers
* Remove half implemented RD related stuff
* Support IBA's recently defined Atomic Write and Flush operations
- erdma support for atomic operations
- New driver 'mana' for Ethernet HW available in Azure VMs. This
driver only supports DPDK"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (122 commits)
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
RDMA: Add missed netdev_put() for the netdevice_tracker
RDMA/rxe: Enable RDMA FLUSH capability for rxe device
RDMA/cm: Make QP FLUSHABLE for supported device
RDMA/rxe: Implement flush completion
RDMA/rxe: Implement flush execution in responder side
RDMA/rxe: Implement RC RDMA FLUSH service in requester side
RDMA/rxe: Extend rxe packet format to support flush
RDMA/rxe: Allow registering persistent flag for pmem MR only
RDMA/rxe: Extend rxe user ABI to support flush
RDMA: Extend RDMA kernel verbs ABI to support flush
RDMA: Extend RDMA user ABI to support flush
RDMA/rxe: Fix incorrect responder length checking
RDMA/rxe: Fix oops with zero length reads
RDMA/mlx5: Remove not-used IB_FLOW_SPEC_IB define
RDMA/hns: Fix XRC caps on HIP08
RDMA/hns: Fix error code of CMD
RDMA/hns: Fix page size cap from firmware
RDMA/hns: Fix PBL page MTR find
RDMA/hns: Fix AH attr queried by query_qp
...
|
|
Now we are ready to enable RDMA FLUSH capability for RXE.
It can support Global Visibility and Persistence placement types.
Link: https://lore.kernel.org/r/20221206130201.30986-11-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Per IBA SPEC, FLUSH will ack in rdma read response with 0 length.
Use IB_WC_FLUSH (aka IB_UVERBS_WC_FLUSH) code to tell userspace a FLUSH
completion.
Link: https://lore.kernel.org/r/20221206130201.30986-9-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Only the requested placement types that also registered in the destination
memory region are acceptable.
Otherwise, responder will also reply NAK "Remote Access Error" if it
found a placement type violation.
We will persist data via arch_wb_cache_pmem(), which could be
architecture specific.
This commit also adds 2 helpers to update qp.resp from the incoming packet.
Link: https://lore.kernel.org/r/20221206130201.30986-8-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Implement FLUSH request operation in the requester.
Link: https://lore.kernel.org/r/20221206130201.30986-7-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Extend rxe opcode tables, headers, helper and constants to support
flush operations.
Refer to the IBA A19.4.1 for more FETH definition details
Link: https://lore.kernel.org/r/20221206130201.30986-6-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Memory region could support at most 2 flush access flags:
IB_ACCESS_FLUSH_PERSISTENT and IB_ACCESS_FLUSH_GLOBAL
But we only allow user to register persistent flush flags to the pmem MR
where it has the ability of persisting data across power cycles.
So registering a persistent access flag to a non-pmem MR will be rejected.
Link: https://lore.kernel.org/r/20221206130201.30986-5-lizhijian@fujitsu.com
CC: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The code in rxe_resp.c at check_length() is incorrect as it compares
pkt->opcode an 8 bit value against various mask bits which are all higher
than 256 so nothing is ever reported.
This patch rewrites this to compare against pkt->mask which is
correct. However this now exposes another error. For UD send packets the
value of the pmtu cannot be determined from qp->mtu. All that is required
here is to later check if the payload fits into the posted receive buffer
in that case.
Fixes: 837a55847ead ("RDMA/rxe: Implement packet length validation on responder")
Link: https://lore.kernel.org/r/20221208210945.28607-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The commit 686d348476ee ("RDMA/rxe: Remove unnecessary mr testing") causes
a kernel crash. If responder get a zero-byte RDMA Read request,
qp->resp.mr is not set in check_rkey() (see IBA C9-88). The mr is NULL in
this case, and a NULL pointer dereference occurs as shown below.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 3622 Comm: python3 Kdump: loaded Not tainted 6.1.0-rc3+ #34
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:__rxe_put+0xc/0x60 [rdma_rxe]
Code: cc cc cc 31 f6 e8 64 36 1b d3 41 b8 01 00 00 00 44 89 c0 c3 cc cc cc cc 41 89 c0 eb c1 90 0f 1f 44 00 00 41 54 b8 ff ff ff ff <f0> 0f c1 47 10 83 f8 01 74 11 45 31 e4 85 c0 7e 20 44 89 e0 41 5c
RSP: 0018:ffffb27bc012ce78 EFLAGS: 00010246
RAX: 00000000ffffffff RBX: ffff9790857b0580 RCX: 0000000000000000
RDX: ffff979080fe145a RSI: 000055560e3e0000 RDI: 0000000000000000
RBP: ffff97909c7dd800 R08: 0000000000000001 R09: e7ce43d97f7bed0f
R10: ffff97908b29c300 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff97908b29c300 R15: 0000000000000000
FS: 00007f276f7bd740(0000) GS:ffff9792b5c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000000114230002 CR4: 0000000000060ee0
Call Trace:
<IRQ>
read_reply+0xda/0x310 [rdma_rxe]
rxe_responder+0x82d/0xe50 [rdma_rxe]
do_task+0x84/0x170 [rdma_rxe]
tasklet_action_common.constprop.0+0xa7/0x120
__do_softirq+0xcb/0x2ac
do_softirq+0x63/0x90
</IRQ>
Support a NULL mr during read_reply()
Fixes: 686d348476ee ("RDMA/rxe: Remove unnecessary mr testing")
Fixes: b5f9a01fae42 ("RDMA/rxe: Fix mr leak in RESPST_ERR_RNR")
Link: https://lore.kernel.org/r/20221209045926.531689-1-matsuda-daisuke@fujitsu.com
Link: https://lore.kernel.org/r/20221202145713.13152-1-lizhijian@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The capability shows that rxe device supports atomic write operation.
Link: https://lore.kernel.org/r/1669905568-62-4-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Generate an atomic write completion when the atomic write request
has been finished.
Link: https://lore.kernel.org/r/1669905568-62-3-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make responder process an atomic write request and send a read response
on RC service.
Link: https://lore.kernel.org/r/1669905568-62-2-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make requester process and send an atomic write request on RC service.
Link: https://lore.kernel.org/r/1669905568-62-1-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Extend rxe_wr_opcode_info[] and rxe_opcode[] for new atomic write opcode.
Link: https://lore.kernel.org/r/1669905432-14-5-git-send-email-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
GUP now supports reliable R/O long-term pinning in COW mappings, such
that we break COW early. MAP_SHARED VMAs only use the shared zeropage so
far in one corner case (DAXFS file with holes), which can be ignored
because GUP does not support long-term pinning in fsdax (see
check_vma_flags()).
Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required
for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop
using FOLL_FORCE, which is really only for ptrace access.
Link: https://lkml.kernel.org/r/20221116102659.70287-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bernard Metzler <bmt@zurich.ibm.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a null-ptr-deref when mount.cifs over rdma:
BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
Read of size 8 at addr 0000000000000018 by task mount.cifs/3046
CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xad/0x130
rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
execute_in_process_context+0x25/0x90
__rxe_cleanup+0x101/0x1d0 [rdma_rxe]
rxe_create_qp+0x16a/0x180 [rdma_rxe]
create_qp.part.0+0x27d/0x340
ib_create_qp_kernel+0x73/0x160
rdma_create_qp+0x100/0x230
_smbd_get_connection+0x752/0x20f0
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause of the issue is the socket create failed in
rxe_qp_init_req().
So move the reset rxe_qp_do_cleanup() after the NULL ptr check.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20221122151437.1057671-1-zhangxiaoxu5@huawei.com
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Correct the mistake, mr is obviously NULL in this code path.
Fixes: 2778b72b1df0 ("RDMA/rxe: Replace pr_xxx by rxe_dbg_xxx in rxe_mr.c")
Link: https://lore.kernel.org/r/Y3eeJW0AdyJYhYyQ@kili
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
rxe_mr_cleanup() which tries to free mr->map again will be called when
rxe_mr_init_user() fails:
CPU: 0 PID: 4917 Comm: rdma_flush_serv Kdump: loaded Not tainted 6.1.0-rc1-roce-flush+ #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5d
panic+0x19e/0x349
end_report.part.0+0x54/0x7c
kasan_report.cold+0xa/0xf
rxe_mr_cleanup+0x9d/0xf0 [rdma_rxe]
__rxe_cleanup+0x10a/0x1e0 [rdma_rxe]
rxe_reg_user_mr+0xb7/0xd0 [rdma_rxe]
ib_uverbs_reg_mr+0x26a/0x480 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x1a2/0x250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1397/0x15a0 [ib_uverbs]
This issue was firstly exposed since commit b18c7da63fcb ("RDMA/rxe: Fix
memory leak in error path code") and then we fixed it in commit
8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") but this
fix was reverted together at last by commit 1e75550648da (Revert
"RDMA/rxe: Create duplicate mapping tables for FMRs")
Simply let rxe_mr_cleanup() always handle freeing the mr->map once it is
successfully allocated.
Fixes: 1e75550648da ("Revert "RDMA/rxe: Create duplicate mapping tables for FMRs"")
Link: https://lore.kernel.org/r/1667099073-2-1-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The rdma_rxe driver does not actually support the reliable datagram
transport but contains a variable with RD opcodes in driver code. And
this variable is never used. So remove it.
Link: https://lore.kernel.org/r/20221112023537.432912-1-yanjun.zhu@intel.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A malicious user may write undefined values into memory mapped completion
queue elements status or opcode. Undefined status or opcode values will
result in out-of-bounds access to an array mapping siw internal
representation of opcode and status to RDMA core representation when
reaping CQ elements. While siw detects those undefined values, it did not
correctly set completion status to a defined value, thus defeating the
whole purpose of the check.
This bug leads to the following Smatch static checker warning:
drivers/infiniband/sw/siw/siw_cq.c:96 siw_reap_cqe()
error: buffer overflow 'map_cqe_status' 10 <= 21
Fixes: bdf1da5df9da ("RDMA/siw: Fix immediate work request flush to completion queue")
Link: https://lore.kernel.org/r/20221115170747.1263298-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_mmap.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-17-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_icrc.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-16-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe.c with rxe_dbg_xxx().
Calls with a rxe device not yet in scope are left as is.
Link: https://lore.kernel.org/r/20221103171013.20659-15-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_task.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-14-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace calls to pr_xxx() in rxe_av.c with rxe_dbg_xxx().
Link: https://lore.kernel.org/r/20221103171013.20659-13-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
