summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2023-06-11RDMA/erdma: Allocate doorbell resources from hardwareCheng Xu
Each ucontext will try to allocate doorbell resources in the extended bar space from hardware. For compatibility, we change nothing for the original bar space, and it will be used only for applications with CAP_SYS_RAWIO authority in the older HW/FW environments. Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com> Link: https://lore.kernel.org/r/20230606055005.80729-3-chengyou@linux.alibaba.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/erdma: Configure PAGE_SIZE to hardwareCheng Xu
Add a new CMDQ message to configure hardware. Initially the page size (in the format of shift) will be passed to hardware, so that hardware can organize the mmio space properly. It's called only if hardware supports it. Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com> Link: https://lore.kernel.org/r/20230606055005.80729-2-chengyou@linux.alibaba.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Fix affinity assignmentMark Bloch
The cited commit aimed to ensure that Virtual Functions (VFs) assign a queue affinity to a Queue Pair (QP) to distribute traffic when the LAG master creates a hardware LAG. If the affinity was set while the hardware was not in LAG, the firmware would ignore the affinity value. However, this commit unintentionally assigned an affinity to QPs on the LAG master's VPORT even if the RDMA device was not marked as LAG-enabled. In most cases, this was not an issue because when the hardware entered hardware LAG configuration, the RDMA device of the LAG master would be destroyed and a new one would be created, marked as LAG-enabled. The problem arises when a user configures Equal-Cost Multipath (ECMP). In ECMP mode, traffic can be directed to different physical ports based on the queue affinity, which is intended for use by VPORTS other than the E-Switch manager. ECMP mode is supported only if both E-Switch managers are in switchdev mode and the appropriate route is configured via IP. In this configuration, the RDMA device is not destroyed, and we retain the RDMA device that is not marked as LAG-enabled. To ensure correct behavior, Send Queues (SQs) opened by the E-Switch manager through verbs should be assigned strict affinity. This means they will only be able to communicate through the native physical port associated with the E-Switch manager. This will prevent the firmware from assigning affinity and will not allow the SQs to be remapped in case of failover. Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Fix Q-counters query in LAG modePatrisious Haddad
Previously we used the core device associated to the IB device in order to do the Q-counters query to the FW, but in LAG mode it is possible that the core device isn't the one that created this VF. Hence instead of using the core device to query the Q-counters we use the ESW core device which is guaranteed to be that of the VF. Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/778d7d7a24892348d0bdef17d2e5f9e044717e86.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Remove vport Q-counters dependency on normal Q-countersPatrisious Haddad
Previously the Q-counters initialization assumed that the vport Q-counters structures and the normal Q-counters structures are identical in size, and hence when a Q-counter was added to normal Q-counters structure but not to the vport Q-counters struct it would lead to that counter name being NULL in switchdev mode, which could cause the kernel crash below. Currently break the dependency between those two structure and always use the appropriate struct size, in order to remove the assumption that both structure sizes are equal. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 20c64a067 P4D 20c64a067 PUD 20152b067 PMD 0 Oops: 0000 [#1] SMP CPU: 19 PID: 11717 Comm: devlink Tainted: G OE 6.2.0_mlnx #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:strlen+0x0/0x20 Code: 66 2e 0f 1f 84 00 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 48 89 f8 74 10 48 83 c7 01 80 3f 00 75 f7 48 29 c7 48 89 RSP: 0018:ffffc9000318b618 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000002c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888211918110 R09: ffff888211918000 R10: 000000000000001e R11: ffff888211918000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8881038ec250 FS: 00007fa53342fe80(0000) GS:ffff88885fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000002042b2003 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> kernfs_name_hash+0x12/0x80 kernfs_find_ns+0x35/0xb0 kernfs_remove_by_name_ns+0x46/0xc0 remove_files.isra.1+0x30/0x70 internal_create_group+0x253/0x380 internal_create_groups.part.4+0x3e/0xa0 setup_port+0x27a/0x8c0 [ib_core] ib_setup_port_attrs+0x9d/0x300 [ib_core] ib_register_device+0x48e/0x550 [ib_core] __mlx5_ib_add+0x2b/0x80 [mlx5_ib] mlx5_ib_vport_rep_load+0x141/0x360 [mlx5_ib] mlx5_esw_offloads_rep_load+0x48/0xa0 [mlx5_core] esw_offloads_enable+0x41e/0xd10 [mlx5_core] mlx5_eswitch_enable_locked+0x1e3/0x340 [mlx5_core] ? __cond_resched+0x15/0x30 mlx5_devlink_eswitch_mode_set+0x204/0x3c0 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0x8d/0x100 genl_family_rcv_msg_doit.isra.19+0xea/0x110 genl_rcv_msg+0x19b/0x290 ? devlink_nl_cmd_region_read_dumpit+0x760/0x760 ? devlink_nl_cmd_port_param_get_doit+0x30/0x30 ? devlink_put+0x50/0x50 ? genl_get_cmd_both+0x60/0x60 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1be/0x2a0 netlink_sendmsg+0x361/0x4d0 sock_sendmsg+0x30/0x40 __sys_sendto+0x11a/0x150 ? handle_mm_fault+0x101/0x2b0 ? do_user_addr_fault+0x21d/0x720 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fa533611cba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffdb6a898a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000daab00 RCX: 00007fa533611cba RDX: 0000000000000038 RSI: 0000000000daab00 RDI: 0000000000000003 RBP: 0000000000daa910 R08: 00007fa533822000 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) mlx_compat(OE) mlxfw(OE) memtrack(OE) pci_hyperv_intf nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_filter iptable_nat dns_resolver nf_nat br_netfilter nfs bridge stp llc lockd grace fscache netfs rfkill overlay iTCO_wdt iTCO_vendor_support kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel i2c_i801 sunrpc lpc_ich sha512_ssse3 pcspkr i2c_smbus mfd_core drm sch_fq_codel i2c_core ip_tables fuse crc32c_intel serio_raw virtio_net net_failover failover [last unloaded: mlxfw] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x0/0x20 Code: 66 2e 0f 1f 84 00 00 00 00 00 48 01 fe eb 0f 0f b6 07 38 d0 74 10 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 c3 48 89 f8 c3 <80> 3f 00 48 89 f8 74 10 48 83 c7 01 80 3f 00 75 f7 48 29 c7 48 89 RSP: 0018:ffffc9000318b618 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000002c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888211918110 R09: ffff888211918000 R10: 000000000000001e R11: ffff888211918000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8881038ec250 FS: 00007fa53342fe80(0000) GS:ffff88885fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000002042b2003 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/016777b7f16eb6bb178999ff59097d0c0f91f68a.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Fix Q-counters per vport allocationPatrisious Haddad
Previously Q-counters data was being allocated over the PF for all of the available vports, however that isn't necessary. Since each VF or SF has a Q-counter allocated for itself. So we only need to allocate two counters data structures, one for the device counters, and one for all the other vports to expose the representors, since they only need to read from it in order to determine mainly counters numbers and names, so they can all share. This in turn also solves a bug we previously had where we couldn't switch the device to switchdev mode when there were more than 128 SF/VFs configured, since that is the maximum amount of Q-counters available for a single port Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/f54671df16e2227a069b229b33b62cd9ee24c475.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Create an indirect flow table for steering anchorMark Bloch
A misbehaved user can create a steering anchor that points to a kernel flow table and then destroy the anchor without freeing the associated STC. This creates a problem as the kernel can't destroy the flow table since there is still a reference to it. As a result, this can exhaust all available flow table resources, preventing other users from using the RDMA device. To prevent this problem, a solution is implemented where a special flow table with two steering rules is created when a user creates a steering anchor for the first time. The rules include one that drops all traffic and another that points to the kernel flow table. If the steering anchor is destroyed, only the rule pointing to the kernel's flow table is removed. Any traffic reaching the special flow table after that is dropped. Since the special flow table is not destroyed when the steering anchor is destroyed, any issues are prevented from occurring. The remaining resources are only destroyed when the RDMA device is destroyed, which happens after all DEVX objects are freed, including the STCs, thus mitigating the issue. Fixes: 0c6ab0ca9a66 ("RDMA/mlx5: Expose steering anchor to userspace") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/b4a88a871d651fa4e8f98d552553c1cfe9ba2cd6.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functionsMaher Sanalla
Delay drop data is initiated for PFs that have the capability of rq_delay_drop and are in roce profile. However, PFs with RAW ethernet profile do not initiate delay drop data on function load, causing kernel panic if delay drop struct members are accessed later on in case a dropless RQ is created. Thus, stage the delay drop initialization as part of RAW ethernet PF loading process. Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/2e9d386785043d48c38711826eb910315c1de141.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Return the firmware result upon destroying QP/RQPatrisious Haddad
Previously when destroying a QP/RQ, the result of the firmware destruction function was ignored and upper layers weren't informed about the failure. Which in turn could lead to various problems since when upper layer isn't aware of the failure it continues its operation thinking that the related QP/RQ was successfully destroyed while it actually wasn't, which could lead to the below kernel WARN. Currently, we return the correct firmware destruction status to upper layers which in case of the RQ would be mlx5_ib_destroy_wq() which was already capable of handling RQ destruction failure or in case of a QP to destroy_qp_common(), which now would actually warn upon qp destruction failure. WARNING: CPU: 3 PID: 995 at drivers/infiniband/core/rdma_core.c:940 uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse CPU: 3 PID: 995 Comm: python3 Not tainted 5.16.0-rc5+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:uverbs_destroy_ufile_hw+0xcb/0xe0 [ib_uverbs] Code: 41 5c 41 5d 41 5e e9 44 34 f0 e0 48 89 df e8 4c 77 ff ff 49 8b 86 10 01 00 00 48 85 c0 74 a1 4c 89 e7 ff d0 eb 9a 0f 0b eb c1 <0f> 0b be 04 00 00 00 48 89 df e8 b6 f6 ff ff e9 75 ff ff ff 90 0f RSP: 0018:ffff8881533e3e78 EFLAGS: 00010287 RAX: ffff88811b2cf3e0 RBX: ffff888106209700 RCX: 0000000000000000 RDX: ffff888106209780 RSI: ffff8881533e3d30 RDI: ffff888109b101a0 RBP: 0000000000000001 R08: ffff888127cb381c R09: 0de9890000000009 R10: ffff888127cb3800 R11: 0000000000000000 R12: ffff888106209780 R13: ffff888106209750 R14: ffff888100f20660 R15: 0000000000000000 FS: 00007f8be353b740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8bd5b117c0 CR3: 000000012cd8a004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_uverbs_close+0x1a/0x90 [ib_uverbs] __fput+0x82/0x230 task_work_run+0x59/0x90 exit_to_user_mode_prepare+0x138/0x140 syscall_exit_to_user_mode+0x1d/0x50 ? __x64_sys_close+0xe/0x40 do_syscall_64+0x4a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8be3ae0abb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 83 43 f9 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 c1 43 f9 ff 8b 44 RSP: 002b:00007ffdb51909c0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000557bb7f7c020 RCX: 00007f8be3ae0abb RDX: 0000557bb7c74010 RSI: 0000557bb7f14ca0 RDI: 0000000000000005 RBP: 0000557bb7fbd598 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000557bb7fbd5b8 R13: 0000557bb7fbd5a8 R14: 0000000000001000 R15: 0000557bb7f7c020 </TASK> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://lore.kernel.org/r/c6df677f931d18090bafbe7f7dbb9524047b7d9b.1685953497.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Handle DCT QP logic separately from low level QP interfacePatrisious Haddad
Previously when destroying a DCT, if the firmware function for the destruction failed, the common resource would have been destroyed either way, since it was destroyed before the firmware object. Which leads to kernel warning "refcount_t: underflow" which indicates possible use-after-free. Which is triggered when we try to destroy the common resource for the second time and execute refcount_dec_and_test(&common->refcount). So, let's fix the destruction order by factoring out the DCT QP logic to be in separate XArray database. refcount_t: underflow; use-after-free. WARNING: CPU: 8 PID: 1002 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0 Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core overlay mlx5_core fuse CPU: 8 PID: 1002 Comm: python3 Not tainted 5.16.0-rc5+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0xd8/0xe0 Code: ff 48 c7 c7 18 f5 23 82 c6 05 60 70 ff 00 01 e8 d0 0a 45 00 0f 0b c3 48 c7 c7 c0 f4 23 82 c6 05 4c 70 ff 00 01 e8 ba 0a 45 00 <0f> 0b c3 0f 1f 44 00 00 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 RSP: 0018:ffff8881221d3aa8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8881313e8d40 RCX: ffff88852cc1b5c8 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff88852cc1b5c0 RBP: ffff888100f70000 R08: ffff88853ffd1ba8 R09: 0000000000000003 R10: 00000000fffff000 R11: 3fffffffffffffff R12: 0000000000000246 R13: ffff888100f71fa0 R14: ffff8881221d3c68 R15: 0000000000000020 FS: 00007efebbb13740(0000) GS:ffff88852cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005611aac29f80 CR3: 00000001313de004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> destroy_resource_common+0x6e/0x95 [mlx5_ib] mlx5_core_destroy_rq_tracked+0x38/0xbe [mlx5_ib] mlx5_ib_destroy_wq+0x22/0x80 [mlx5_ib] ib_destroy_wq_user+0x1f/0x40 [ib_core] uverbs_free_wq+0x19/0x40 [ib_uverbs] destroy_hw_idr_uobject+0x18/0x50 [ib_uverbs] uverbs_destroy_uobject+0x2f/0x190 [ib_uverbs] uobj_destroy+0x3c/0x80 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xb80 [ib_uverbs] ? uverbs_free_wq+0x40/0x40 [ib_uverbs] ? ip_list_rcv+0xf7/0x120 ? netif_receive_skb_list_internal+0x1b6/0x2d0 ? task_tick_fair+0xbf/0x450 ? __handle_mm_fault+0x11fc/0x1450 ib_uverbs_ioctl+0xa4/0x110 [ib_uverbs] __x64_sys_ioctl+0x3e4/0x8e0 ? handle_mm_fault+0xb9/0x210 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7efebc0be17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe71813e78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe71813fb8 RCX: 00007efebc0be17b RDX: 00007ffe71813fa0 RSI: 00000000c0181b01 RDI: 0000000000000005 RBP: 00007ffe71813f80 R08: 00005611aae96020 R09: 000000000000004f R10: 00007efebbf9ffa0 R11: 0000000000000246 R12: 00007ffe71813f80 R13: 00007ffe71813f4c R14: 00005611aae2eca0 R15: 00007efeae6c89d0 </TASK> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/4470888466c8a898edc9833286967529cc5f3c0d.1685953497.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-11RDMA/mlx5: Reduce QP table exposureLeon Romanovsky
driver.h is common header to whole mlx5 code base, but struct mlx5_qp_table is used in mlx5_ib driver only. So move that struct to be under sole responsibility of mlx5_ib. Link: https://lore.kernel.org/r/bec0dc1158e795813b135d1143147977f26bf668.1685953497.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2023-06-09mm/gup: remove vmas parameter from pin_user_pages()Lorenzo Stoakes
We are now in a position where no caller of pin_user_pages() requires the vmas parameter at all, so eliminate this parameter from the function and all callers. This clears the way to removing the vmas parameter from GUP altogether. Link: https://lkml.kernel.org/r/195a99ae949c9f5cb589d2222b736ced96ec199a.1684350871.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> [qib] Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> [drivers/media] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian König <christian.koenig@amd.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-09RDMA/vmw_pvrdma: Remove unnecessary check on wr->opcodeBryan Tan
wr->opcode is unsigned; checking if it is negative is unnecessary. Fix this issue by removing the check. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Link: https://lore.kernel.org/r/20230605183728.47021-1-bryantan@vmware.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/07c48eee-0aca-48ee-897a-38588c341c41@kili.mountain Signed-off-by: Bryan Tan <bryantan@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-07{net/RDMA}/mlx5: introduce lag_for_each_peerShay Drory
Introduce a generic APIs to iterate over all the devices which are part of the LAG. This API replace mlx5_lag_get_peer_mdev() which retrieve only a single peer device from the lag. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-07RDMA/mlx5: Free second uplink ib portShay Drory
The cited patch introduce ib port for the slave device uplink in case of multiport eswitch. However, this ib port didn't perform anything when unloaded. Unload the new ib port properly. Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-06-01RDMA/bnxt_re: Fix reporting active_{speed,width} attributesKamal Heib
After commit 6d758147c7b8 ("RDMA/bnxt_re: Use auxiliary driver interface") the active_{speed, width} attributes are reported incorrectly, This is happening because ib_get_eth_speed() is called only once from bnxt_re_ib_init() - Fix this issue by calling ib_get_eth_speed() from bnxt_re_query_port(). Fixes: 6d758147c7b8 ("RDMA/bnxt_re: Use auxiliary driver interface") Link: https://lore.kernel.org/r/20230529153525.87254-1-kheib@redhat.com Signed-off-by: Kamal Heib <kheib@redhat.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01RDMA/hns: Add clear_hem return value to logChengchang Tang
Log return value of clear_hem() to help diagnose. Link: https://lore.kernel.org/r/20230523121641.3132102-4-huangjunxian6@hisilicon.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01RDMA/hns: Fix hns_roce_table_get return valueChengchang Tang
The return value of set_hem has been fixed to ENODEV, which will lead a diagnostic information missing. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20230523121641.3132102-3-huangjunxian6@hisilicon.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01RDMA/hns: Remove unnecessary QP type checksJunxian Huang
It is not necessary to check the type of the queue on IO path because unsupported QP type cannot be created. Link: https://lore.kernel.org/r/20230523121641.3132102-2-huangjunxian6@hisilicon.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01IB/hfi1: Remove unused struct mmu_rb_ops fields .insert, .invalidateBrendan Cunningham
The struct mmu_rb_ops function pointers .insert, .invalidate were only used to increment and decrement struct sdma_mmu_node.refcount. With the deletion of struct sdma_mmu_node.refcount and the addition of struct mmu_rb_node.refcount these function pointers are not called and there are no implementations of them. So it is safe to delete these from struct mmu_rb_ops. Link: https://lore.kernel.org/r/168451526508.3702129.8677714753157495310.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01IB/hfi1: Add mmu_rb_node refcount to hfi1_mmu_rb_template tracepointsBrendan Cunningham
Add kref_read() of mmu_rb_node.refcount in hfi1_mmu_rb_template-type tracepoint output. Change hfi1_mmu_rb_template tracepoint to take a struct mmu_rb_node* and record the values it needs from that. This makes the trace_hfi1_mmu*() calls shorter and easier to read. Add hfi1_mmu_release_node() tracepoint before all mmu_rb_node->handler->ops->remove() calls. Make hfi1_mmu_rb_search() tracepoint its own tracepoint type separate from hfi1_mmu_rb_template since hfi1_mmu_rb_search() does not take a struct mmu_rb_node*. Link: https://lore.kernel.org/r/168451525987.3702129.12824880387615916700.stgit@awfm-02.cornelisnetworks.com Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01IB/hfi1: Fix wrong mmu_node used for user SDMA packet after invalidateBrendan Cunningham
The hfi1 user SDMA pinned-page cache will leave a stale cache entry when the cache-entry's virtual address range is invalidated but that cache entry is in-use by an outstanding SDMA request. Subsequent user SDMA requests with buffers in or spanning the virtual address range of the stale cache entry will result in packets constructed from the wrong memory, the physical pages pointed to by the stale cache entry. To fix this, remove mmu_rb_node cache entries from the mmu_rb_handler cache independent of the cache entry's refcount. Add 'struct kref refcount' to struct mmu_rb_node and manage mmu_rb_node lifetime with kref_get() and kref_put(). mmu_rb_node.refcount makes sdma_mmu_node.refcount redundant. Remove 'atomic_t refcount' from struct sdma_mmu_node and change sdma_mmu_node code to use mmu_rb_node.refcount. Move the mmu_rb_handler destructor call after a wait-for-SDMA-request-completion call so mmu_rb_nodes that need mmu_rb_handler's workqueue to queue themselves up for destruction from an interrupt context may do so. Fixes: f48ad614c100 ("IB/hfi1: Move driver out of staging") Fixes: 00cbce5cbf88 ("IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests") Link: https://lore.kernel.org/r/168451393605.3700681.13493776139032178861.stgit@awfm-02.cornelisnetworks.com Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01RDMA/irdma: avoid fortify-string warning in irdma_clr_wqesArnd Bergmann
Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") triggers a warning for fortified memset(): In function 'fortify_memset_chk', inlined from 'irdma_clr_wqes' at drivers/infiniband/hw/irdma/uk.c:103:4: include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 493 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The problem here isthat the inner array only has four 8-byte elements, so clearing 4096 bytes overflows that. As this structure is part of an outer array, change the code to pass a pointer to the irdma_qp_quanta instead, and change the size argument for readability, matching the comment above it. Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries") Link: https://lore.kernel.org/r/20230523111859.2197825-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-01RDMA/mana_ib: Use v2 version of cfg_rx_steer_req to enable RX coalescingLong Li
With RX coalescing, one CQE entry can be used to indicate multiple packets on the receive queue. This saves processing time and PCI bandwidth over the CQ. The MANA Ethernet driver also uses the v2 version of the protocol. It doesn't use RX coalescing and its behavior is not changed. Link: https://lore.kernel.org/r/1684045095-31228-1-git-send-email-longli@linuxonhyperv.com Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-29RDMA/irdma: Fix Local Invalidate fencingMustafa Ismail
If the local invalidate fence is indicated in the WR, only the read fence is currently being set in WQE. Fix this to set both the read and local fence in the WQE. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20230522155654.1309-4-shiraz.saleem@intel.com Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-29RDMA/irdma: Prevent QP use after freeMustafa Ismail
There is a window where the poll cq may use a QP that has been freed. This can happen if a CQE is polled before irdma_clean_cqes() can clear the CQE's related to the QP and the destroy QP races to free the QP memory. then the QP structures are used in irdma_poll_cq. Fix this by moving the clearing of CQE's before the reference is removed and the QP is destroyed. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://lore.kernel.org/r/20230522155654.1309-3-shiraz.saleem@intel.com Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Remove unnecessary checksKalesh AP
The NULL check inside bnxt_qplib_del_sgid() and bnxt_qplib_add_sgid() always return false as the "sgid_tbl" inside "rdev->qplib_res" is a static memory. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-8-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Return directly without goto jumpsKalesh AP
When there is no cleanup to be done, return directly. This will help eliminating unnecessary local variables and goto labels. This patch fixes such occurrences in qplib_fp.c file. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Fixes: 159fb4ceacd7 ("RDMA/bnxt_re: introduce a function to allocate swq") Link: https://lore.kernel.org/r/1684478897-12247-7-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Fix to remove an unnecessary logKalesh AP
During destroy_qp, driver sets the qp handle in the existing CQEs belonging to the QP being destroyed to NULL. As a result, a poll_cq after destroy_qp can report unnecessary messages. Remove this noise from system logs. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-6-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Remove a redundant check inside bnxt_re_update_gidKalesh AP
The NULL check inside bnxt_re_update_gid() always return false. If sgid_tbl->tbl is not allocated, then dev_init would have failed. Fixes: 5fac5b1b297f ("RDMA/bnxt_re: Add vlan tag for untagged RoCE traffic when PFC is configured") Link: https://lore.kernel.org/r/1684478897-12247-5-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Use unique names while registering interruptsKalesh AP
bnxt_re currently uses the names "bnxt_qplib_creq" and "bnxt_qplib_nq-0" while registering IRQs. There is no way to distinguish the IRQs of different device ports when there are multiple IB devices registered. This could make the scenarios worse where one want to pin IRQs of a device port to certain CPUs. Fixed the code to use unique names which has PCI BDF information while registering interrupts like: "bnxt_re-nq-0@pci:0000:65:00.0" and "bnxt_re-creq@pci:0000:65:00.1". Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-4-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Fix to remove unnecessary return labelsKalesh AP
If there is no cleanup needed then just return directly. This cleans up the code and improve readability. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-3-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Disable/kill tasklet only if it is enabledSelvin Xavier
When the ulp hook to start the IRQ fails because the rings are not available, tasklets are not enabled. In this case when the driver is unloaded, driver calls CREQ tasklet_kill. This causes an indefinite hang as the tasklet is not enabled. Driver shouldn't call tasklet_kill if it is not enabled. So using the creq->requested and nq->requested flags to identify if both tasklets/irqs are registered. Checking this flag while scheduling the tasklet from ISR. Also, added a cleanup for disabling tasklet, in case request_irq fails during start_irq. Check for return value for bnxt_qplib_rcfw_start_irq and in case the bnxt_qplib_rcfw_start_irq fails, return bnxt_re_start_irq without attempting to start NQ IRQs. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684478897-12247-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Do not enable congestion control on VFsKalesh AP
Congestion control needs to be enabled only on the PFs. FW fails the command if issued on VFs. Avoid sending the command on VFs. Fixes: f13bcef04ba0 ("RDMA/bnxt_re: Enable congestion control by default") Link: https://lore.kernel.org/r/1684397461-23082-4-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Fix return value of bnxt_re_process_raw_qp_pkt_rxKalesh AP
bnxt_re_process_raw_qp_pkt_rx() always return 0 and ignores the return value of bnxt_re_post_send_shadow_qp(). Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684397461-23082-3-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-19RDMA/bnxt_re: Fix a possible memory leakKalesh AP
Inside bnxt_qplib_create_cq(), when the check for NULL DPI fails, driver returns directly without freeing the memory allocated inside bnxt_qplib_alloc_init_hwq() routine. Fixed this by moving the check for NULL DPI before invoking bnxt_qplib_alloc_init_hwq(). Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1684397461-23082-2-git-send-email-selvin.xavier@broadcom.com Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-17RDMA/irdma: Move iw device ops initializationKamal Heib
Move the initialization of the iw device ops to be under the declaration of the irdma_iw_dev_ops. Link: https://lore.kernel.org/r/20230515191142.413633-4-kheib@redhat.com Signed-off-by: Kamal Heib <kheib@redhat.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-17RDMA/irdma: Return void from irdma_init_rdma_device()Kamal Heib
The return value from irdma_init_rdma_device() is always 0 - change it to be void. Link: https://lore.kernel.org/r/20230515191142.413633-3-kheib@redhat.com Signed-off-by: Kamal Heib <kheib@redhat.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-17RDMA/irdma: Return void from irdma_init_iw_device()Kamal Heib
The return value from irdma_init_iw_device() is always 0 - change it to be void. Link: https://lore.kernel.org/r/20230515191142.413633-2-kheib@redhat.com Signed-off-by: Kamal Heib <kheib@redhat.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-17RDMA/hns: Modify the value of long message loopback sliceYangyang Li
Long message loopback slice is used for achieving traffic balance between QPs. It prevents the problem that QPs with large traffic occupying the hardware pipeline for a long time and QPs with small traffic cannot be scheduled. Currently, its maximum value is set to 16K, which means only after a QP sends 16K will the second QP be scheduled. This value is too large, which will lead to unbalanced traffic scheduling, and thus it needs to be modified. The setting range of the long message loopback slice is modified to be from 1024 (the lower limit supported by hardware) to mtu. Actual testing shows that this value can significantly reduce error in hardware traffic scheduling. This solution is compatible with both HIP08 and HIP09. The modified lp_pktn_ini has a maximum value of 2 (when mtu is 256), so the range checking code for lp_pktn_ini is no longer necessary and needs to be deleted. Fixes: 0e60778efb07 ("RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility") Link: https://lore.kernel.org/r/20230512092245.344442-4-huangjunxian6@hisilicon.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-17RDMA/hns: Fix base address table allocationChengchang Tang
For hns, the specification of an entry like resource (E.g. WQE/CQE/EQE) depends on BT page size, buf page size and hopnum. For user mode, the buf page size depends on UMEM. Therefore, the actual specification is controlled by BT page size and hopnum. The current BT page size and hopnum are obtained from firmware. This makes the driver inflexible and introduces unnecessary constraints. Resource allocation failures occur in many scenarios. This patch will calculate whether the BT page size set by firmware is sufficient before allocating BT, and increase the BT page size if it is insufficient. Fixes: 1133401412a9 ("RDMA/hns: Optimize base address table config flow for qp buffer") Link: https://lore.kernel.org/r/20230512092245.344442-3-huangjunxian6@hisilicon.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-17RDMA/hns: Fix timeout attr in query qp for HIP08Chengchang Tang
On HIP08, the queried timeout attr is different from the timeout attr configured by the user. It is found by rdma-core testcase test_rdmacm_async_traffic: ====================================================================== FAIL: test_rdmacm_async_traffic (tests.test_rdmacm.CMTestCase) ---------------------------------------------------------------------- Traceback (most recent call last): File "./tests/test_rdmacm.py", line 33, in test_rdmacm_async_traffic self.two_nodes_rdmacm_traffic(CMAsyncConnection, self.rdmacm_traffic, File "./tests/base.py", line 382, in two_nodes_rdmacm_traffic raise(res) AssertionError Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/20230512092245.344442-2-huangjunxian6@hisilicon.com Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-16RDMA/efa: Fix unsupported page sizes in deviceYonatan Nachum
Device uses 4KB size blocks for user pages indirect list while the driver creates those blocks with the size of PAGE_SIZE of the kernel. On kernels with PAGE_SIZE different than 4KB (ARM RHEL), this leads to a failure on register MR with indirect list because of the miss communication between driver and device. Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Link: https://lore.kernel.org/r/20230511115103.13876-1-ynachum@amazon.com Reviewed-by: Firas Jahjah <firasj@amazon.com> Reviewed-by: Michael Margolin <mrgolin@amazon.com> Signed-off-by: Yonatan Nachum <ynachum@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-05-12RDMA/bnxt_re: Fix the page_size used during the MR creationSelvin Xavier
Driver populates the list of pages used for Memory region wrongly when page size is more than system page size. This is causing a failure when some of the applications that creates MR with page size as 2M. Since HW can support multiple page sizes, pass the correct page size while creating the MR. Also, driver need not adjust the number of pages when HW Queues are created with user memory. It should work with the number of dma blocks returned by ib_umem_num_dma_blocks. Fix this calculation also. Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Fixes: f6919d56388c ("RDMA/bnxt_re: Code refactor while populating user MRs") Link: https://lore.kernel.org/r/1683484169-9539-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-04-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Usual wide collection of unrelated items in drivers: - Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5, rxe, usnic, usnic, bnxt_re, ocrdma, iser: - remove unnecessary NULL checks - kmap obsolescence - pci_enable_pcie_error_reporting() obsolescence - unused variables and macros - trace event related warnings - casting warnings - Code cleanups for irdm and erdma - EFA reporting of 128 byte PCIe TLP support - mlx5 more agressively uses the out of order HW feature - Big rework of how state machines and tasks work in rxe - Fix a syzkaller found crash netdev refcount leak in siw - bnxt_re revises their HW description header - Congestion control for bnxt_re - Use mmu_notifiers more safely in hfi1 - mlx5 gets better support for PCIe relaxed ordering inside VMs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (81 commits) RDMA/efa: Add rdma write capability to device caps RDMA/mlx5: Use correct device num_ports when modify DC RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call RDMA/rxe: Fix spinlock recursion deadlock on requester RDMA/mlx5: Fix flow counter query via DEVX RDMA/rxe: Protect QP state with qp->state_lock RDMA/rxe: Move code to check if drained to subroutine RDMA/rxe: Remove qp->req.state RDMA/rxe: Remove qp->comp.state RDMA/rxe: Remove qp->resp.state RDMA/mlx5: Allow relaxed ordering read in VFs and VMs net/mlx5: Update relaxed ordering read HCA capabilities RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write RDMA: Add ib_virt_dma_to_page() RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task" RDMA/irdma: Slightly optimize irdma_form_ah_cm_frame() RDMA/rxe: Fix incorrect TASKLET_STATE_SCHED check in rxe_task.c IB/hfi1: Place struct mmu_rb_handler on cache line start IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests ...
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
2023-04-24Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linuxLinus Torvalds
Pull ITER_UBUF updates from Jens Axboe: "This turns singe vector imports into ITER_UBUF, rather than ITER_IOVEC. The former is more trivial to iterate and advance, and hence a bit more efficient. From some very unscientific testing, ~60% of all iovec imports are single vector" * tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux: iov_iter: Mark copy_compat_iovec_from_user() noinline iov_iter: import single vector iovecs as ITER_UBUF iov_iter: convert import_single_range() to ITER_UBUF iov_iter: overlay struct iovec and ubuf/len iov_iter: set nr_segs = 1 for ITER_UBUF iov_iter: remove iov_iter_iovec() iov_iter: add iter_iov_addr() and iter_iov_len() helpers ALSA: pcm: check for user backed iterator, not specific iterator type IB/qib: check for user backed iterator, not specific iterator type IB/hfi1: check for user backed iterator, not specific iterator type iov_iter: add iter_iovec() helper block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
2023-04-21RDMA/efa: Add rdma write capability to device capsYonatan Nachum
Add rdma write capability that is propagated from the device to rdma-core. Enable MR creation with remote write permissions according to this device capability. Link: https://lore.kernel.org/r/20230404154313.35194-1-ynachum@amazon.com Reviewed-by: Firas Jahjah <firasj@amazon.com> Reviewed-by: Michael Margolin <mrgolin@amazon.com> Signed-off-by: Yonatan Nachum <ynachum@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-04-21RDMA/mlx5: Use correct device num_ports when modify DCMark Zhang
Just like other QP types, when modify DC, the port_num should be compared with dev->num_ports, instead of HCA_CAP.num_ports. Otherwise Multi-port vHCA on DC may not work. Fixes: 776a3906b692 ("IB/mlx5: Add support for DC target QP") Link: https://lore.kernel.org/r/20230420013906.1244185-1-markzhang@nvidia.com Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-04-21RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() callTejun Heo
Workqueue is in the process of cleaning up the distinction between unbound workqueues w/ @nr_active==1 and ordered workqueues. Explicit WQ_UNBOUND isn't needed for alloc_ordered_workqueue() and will trigger a warning in the future. Let's remove it. This doesn't cause any functional changes. Link: https://lore.kernel.org/r/ZEGW-IcFReR1juVM@slm.duckdns.org Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 15:08:36 +0000