| Age | Commit message (Collapse) | Author |
|---|
|
This patch follows the logic from ib_core but considers the internal
device state upon executing the involved commands.
Specifically,
Upon internal error state modify QP to an error state can be assumed to
be success as each in-progress WR going to be flushed in error in any
case as expected by that modify command.
In addition,
As the drain should never fail the driver makes sure that post_send/recv
will succeed even if the device is already in an internal error state.
As such once the driver will supply the simulated/SW CQEs the CQE for
the drain WR will be handled as well.
In case of an internal error state the CQE for the drain WR may be
completed as part of the main task that handled the error state or by
the task that issued the drain WR.
As the above depends on scheduling the code takes the relevant locks and
actions to make sure that the completion handler for that WR will always
be called after that the post_send/recv were issued but not in parallel
to the other task that handles the error flow.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Return a device UAR index for a given user index via the DEVX interface.
Security note:
The hardware protection mechanism works like this: Each device object that
is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in
the device specification manual) upon its creation. Then upon doorbell,
hardware fetches the object context for which the doorbell was rang, and
validates that the UAR through which the DB was rang matches the UAR ID
of the object.
If no match the doorbell is silently ignored by the hardware. Of
course, the user cannot ring a doorbell on a UAR that was not mapped to
it.
Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command
mailboxes (except tagging them with UID), we expose to the user its UAR
ID, so it can embed it in these objects in the expected specification
format. So the only thing the user can do is hurt itself by creating a
QP/SQ/CQ with a UAR ID other than his, and then in this case other users
may ring a doorbell on its objects.
The consequence of that will be that another user can schedule a QP/SQ
of the buggy user for execution (just insert it to the hardware schedule
queue or arm its CQ for event generation), no further harm is expected.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.
Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-next
Update mlx4 to support user MR creation against read-only memory, previously
it required the memory to be writable.
Based on rdma for-rc due to dependencies.
* mr_fix: (2 commits)
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
IB/core: Make testing MR flags for writability a static inline function
|
|
Several items of conflict have arisen between the RDMA stack's for-rc
branch and upcoming for-next work:
9fd4350ba895 ("IB/rxe: avoid double kfree_skb") directly conflicts with
2e47350789eb ("IB/rxe: optimize the function duplicate_request")
Patches already submitted by Intel for the hfi1 driver will fail to
apply cleanly without this merge
Other people on the mailing list have notified that their upcoming
patches also fail to apply cleanly without this merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
As most kernel RDMA ULPs, (e.g. NVMe over Fabrics in its default
"register_always=Y" mode) registers and invalidates user buffer
upon each IO.
Today the mlx5 driver is posting the registration work
request using scatter/gather entry for the MTT/KLM list.
The fetch of the MTT/KLM list becomes the bottleneck in
number of IO operation could be done by NVMe over Fabrics
host driver on a single adapter as shown below.
This patch is adding the support for inline registration
work request upon MTT/KLM list of size <=64B.
The result for NVMe over Fabrics is increase of > x3.5 for small
IOs as shown below, I expect other ULPs (e.g iSER, SRP, NFS over RDMA)
performance to be enhanced as well.
The following results were taken against a single NVMe-oF (RoCE link layer)
subsystem with a single namespace backed by null_blk using fio benchmark
(with rw=randread, numjobs=48, iodepth={16,64}, ioengine=libaio direct=1):
ConnectX-5 (pci Width x16)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1302.8K/34.82% 4951.9K/99.02%
1KB 1284.3K/33.86% 4232.7K/98.09%
2KB 1238.6K/34.1% 2797.5K/80.04%
4KB 1169.3K/32.46% 1941.3K/61.35%
8KB 1013.4K/30.08% 1236.6K/39.47%
16KB 695.7K/20.19% 696.9K/20.59%
32KB 350.3K/9.64% 350.6K/10.3%
64KB 175.86K/5.27% 175.9K/5.28%
ConnectX-4 (pci Width x8)
---------------------------
Block Size s/g reg_wr inline reg_wr
++++++++++ +++++++++++++++ ++++++++++++++++
512B 1285.8K/42.66% 4242.7K/98.18%
1KB 1254.1K/41.74% 3569.2K/96.00%
2KB 1185.9K/39.83% 2173.9K/75.58%
4KB 1069.4K/36.46% 1343.3K/47.47%
8KB 755.1K/27.77% 748.7K/29.14%
Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
User can leave system without medium BlueFlames registers,
however the code assumed that at least one such register exists.
This patch fixes that assumption.
Fixes: c1be5232d21d ("IB/mlx5: Fix micro UAR allocator")
Reported-by: Rohit Zambre <rzambre@uci.edu>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Ensure that user didn't supply values too large that can cause overflow.
UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23
shift exponent -2147483648 is negative
CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call
Trace:
dump_stack+0xde/0x164
ubsan_epilogue+0xe/0x81
set_rq_size+0x7c2/0xa90
create_qp_common+0xc18/0x43c0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x2260
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
do_syscall_64+0x1aa/0x740
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x433569
RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569
RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003
RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
|
|
When a Raw Ethernet QP is created, we actually create a few objects.
One of these objects is a TIR. Currently, a TIR could hash (and spread
the traffic) by IP or port only. Adding a hashing by IPSec SPI to TIR
creation with the required UAPI bit.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This structure is pushed down the ex and the non-ex path, so it needs to be
aligned to 8 bytes to go through ex without implicit padding.
Old user space will provide 4 bytes of resp on !ex and 8 bytes on ex, so
take the approach of just copying the minimum length.
New user space will consistently provide 8 bytes in both cases.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Move query SQ state function from mlx5_ib to mlx5_core in order to
have it in shared code.
It will be used in a downstream patch from mlx5e.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In some firmware configuration, UMR usage from Virtual Functions is restricted.
This information is published to the driver using new capability bits.
Avoid using UMRs in these cases and use the Firmware slow-path flow to create
mkeys and populate them with Virtual to Physical address translation.
Older drivers that do not have this patch, will end up using memory keys that
aren't populated with Virtual to Physical address translation that is done
part of the UMR work.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e61 (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable RAW QP to be able to configure burst control by modify_qp. By
using burst control with rate limiting, user can achieve best
performance and accuracy. The burst control information is passed by
user through udata.
This patch also reports burst control capability for mlx5 related
hardwares, burst control is only marked as supported when both
packet_pacing_burst_bound and packet_pacing_typical_size are
supported.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e61 (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
mlx5 modify_qp() relies on FW that the error will be thrown if wrong
state is supplied. The missing check in FW causes the following crash
while using XRC_TGT QPs.
[ 14.769632] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 14.771085] IP: mlx5_ib_modify_qp+0xf60/0x13f0
[ 14.771894] PGD 800000001472e067 P4D 800000001472e067 PUD 14529067 PMD 0
[ 14.773126] Oops: 0002 [#1] SMP PTI
[ 14.773763] CPU: 0 PID: 365 Comm: ubsan Not tainted 4.16.0-rc1-00038-g8151138c0793 #119
[ 14.775192] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[ 14.777522] RIP: 0010:mlx5_ib_modify_qp+0xf60/0x13f0
[ 14.778417] RSP: 0018:ffffbf48001c7bd8 EFLAGS: 00010246
[ 14.779346] RAX: 0000000000000000 RBX: ffff9a8f9447d400 RCX: 0000000000000000
[ 14.780643] RDX: 0000000000000000 RSI: 000000000000000a RDI: 0000000000000000
[ 14.781930] RBP: 0000000000000000 R08: 00000000000217b0 R09: ffffffffbc9c1504
[ 14.783214] R10: fffff4a180519480 R11: ffff9a8f94523600 R12: ffff9a8f9493e240
[ 14.784507] R13: ffff9a8f9447d738 R14: 000000000000050a R15: 0000000000000000
[ 14.785800] FS: 00007f545b466700(0000) GS:ffff9a8f9fc00000(0000) knlGS:0000000000000000
[ 14.787073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.787792] CR2: 0000000000000000 CR3: 00000000144be000 CR4: 00000000000006b0
[ 14.788689] Call Trace:
[ 14.789007] _ib_modify_qp+0x71/0x120
[ 14.789475] modify_qp.isra.20+0x207/0x2f0
[ 14.790010] ib_uverbs_modify_qp+0x90/0xe0
[ 14.790532] ib_uverbs_write+0x1d2/0x3c0
[ 14.791049] ? __handle_mm_fault+0x93c/0xe40
[ 14.791644] __vfs_write+0x36/0x180
[ 14.792096] ? handle_mm_fault+0xc1/0x210
[ 14.792601] vfs_write+0xad/0x1e0
[ 14.793018] SyS_write+0x52/0xc0
[ 14.793422] do_syscall_64+0x75/0x180
[ 14.793888] entry_SYSCALL_64_after_hwframe+0x21/0x86
[ 14.794527] RIP: 0033:0x7f545ad76099
[ 14.794975] RSP: 002b:00007ffd78787468 EFLAGS: 00000287 ORIG_RAX: 0000000000000001
[ 14.795958] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f545ad76099
[ 14.797075] RDX: 0000000000000078 RSI: 0000000020009000 RDI: 0000000000000003
[ 14.798140] RBP: 00007ffd78787470 R08: 00007ffd78787480 R09: 00007ffd78787480
[ 14.799207] R10: 00007ffd78787480 R11: 0000000000000287 R12: 00005599ada98760
[ 14.800277] R13: 00007ffd78787560 R14: 0000000000000000 R15: 0000000000000000
[ 14.801341] Code: 4c 8b 1c 24 48 8b 83 70 02 00 00 48 c7 83 cc 02 00
00 00 00 00 00 48 c7 83 24 03 00 00 00 00 00 00 c7 83 2c 03 00 00 00 00
00 00 <c7> 00 00 00 00 00 48 8b 83 70 02 00 00 c7 40 04 00 00 00 00 4c
[ 14.804012] RIP: mlx5_ib_modify_qp+0xf60/0x13f0 RSP: ffffbf48001c7bd8
[ 14.804838] CR2: 0000000000000000
[ 14.805288] ---[ end trace 3f1da0df5c8b7c37 ]---
Cc: syzkaller <syzkaller@googlegroups.com>
Reported-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add a check for the length of the qpin structure to prevent out-of-bounds reads
BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2
Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549
CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0x8d/0xd4
print_address_description+0x73/0x290
kasan_report+0x25c/0x370
? create_raw_packet_qp+0x114c/0x15e2
memcpy+0x1f/0x50
create_raw_packet_qp+0x114c/0x15e2
? create_raw_packet_qp_tis.isra.28+0x13d/0x13d
? lock_acquire+0x370/0x370
create_qp_common+0x2245/0x3b50
? destroy_qp_user.isra.47+0x100/0x100
? kasan_kmalloc+0x13d/0x170
? sched_clock_cpu+0x18/0x180
? fs_reclaim_acquire.part.15+0x5/0x30
? __lock_acquire+0xa11/0x1da0
? sched_clock_cpu+0x18/0x180
? kmem_cache_alloc_trace+0x17e/0x310
? mlx5_ib_create_qp+0x30e/0x17b0
mlx5_ib_create_qp+0x33d/0x17b0
? sched_clock_cpu+0x18/0x180
? create_qp_common+0x3b50/0x3b50
? lock_acquire+0x370/0x370
? __radix_tree_lookup+0x180/0x220
? uverbs_try_lock_object+0x68/0xc0
? rdma_lookup_get_uobject+0x114/0x240
create_qp.isra.5+0xce4/0x1e20
? ib_uverbs_ex_create_cq_cb+0xa0/0xa0
? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00
? ib_uverbs_cq_event_handler+0x160/0x160
? __might_fault+0x17c/0x1c0
ib_uverbs_create_qp+0x21b/0x2a0
? ib_uverbs_destroy_cq+0x2e0/0x2e0
ib_uverbs_write+0x55a/0xad0
? ib_uverbs_destroy_cq+0x2e0/0x2e0
? ib_uverbs_destroy_cq+0x2e0/0x2e0
? ib_uverbs_open+0x760/0x760
? futex_wake+0x147/0x410
? check_prev_add+0x1680/0x1680
? do_futex+0x3d3/0xa60
? sched_clock_cpu+0x18/0x180
__vfs_write+0xf7/0x5c0
? ib_uverbs_open+0x760/0x760
? kernel_read+0x110/0x110
? lock_acquire+0x370/0x370
? __fget+0x264/0x3b0
vfs_write+0x18a/0x460
SyS_write+0xc7/0x1a0
? SyS_read+0x1a0/0x1a0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x4477b9
RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9
RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005
RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff
R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0
Allocated by task 549:
__kmalloc+0x15e/0x340
kvmalloc_node+0xa1/0xd0
create_user_qp.isra.46+0xd42/0x1610
create_qp_common+0x2e63/0x3b50
mlx5_ib_create_qp+0x33d/0x17b0
create_qp.isra.5+0xce4/0x1e20
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0x55a/0xad0
__vfs_write+0xf7/0x5c0
vfs_write+0x18a/0x460
SyS_write+0xc7/0x1a0
entry_SYSCALL_64_fastpath+0x18/0x85
Freed by task 368:
kfree+0xeb/0x2f0
kernfs_fop_release+0x140/0x180
__fput+0x266/0x700
task_work_run+0x104/0x180
exit_to_usermode_loop+0xf7/0x110
syscall_return_slowpath+0x298/0x370
entry_SYSCALL_64_fastpath+0x83/0x85
The buggy address belongs to the object at ffff880066b99180 which
belongs to the cache kmalloc-512 of size 512 The buggy address is
located 272 bytes inside of 512-byte region [ffff880066b99180,
ffff880066b99380) The buggy address belongs to the page:
page:000000006040eedd count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019
raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: 0fb2ed66a14c ("IB/mlx5: Add create and destroy functionality for Raw Packet QP")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next
mlx5-updates-2018-02-28-1 (IPSec-1)
This series consists of some fixes and refactors for the mlx5 drivers,
especially around the FPGA and flow steering. Most of them are trivial
fixes and are the foundation of allowing IPSec acceleration from user-space.
We use flow steering abstraction in order to accelerate IPSec packets.
When a user creates a steering rule, [s]he states that we'll carry an
encrypt/decrypt flow action (using a specific configuration) for every
packet which conforms to a certain match. Since currently offloading these
packets is done via FPGA, we'll add another set of flow steering ops.
These ops will execute the required FPGA commands and then call the
standard steering ops.
In order to achieve this, we need that the commands will get all the
required information. Therefore, we pass the fte object and embed the
flow_action struct inside the fte. In addition, we add the shim layer
that will later be used for alternating between the standard and the
FPGA steering commands.
Some fixes, like " net/mlx5e: Wait for FPGA command responses with a timeout"
are very relevant for user-space applications, as these applications could
be killed, but we still want to wait for the FPGA and update the kernel's
database.
Regards,
Aviad and Matan
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
"err" is either zero or possibly uninitialized here. It should be
-EINVAL.
Fixes: 427c1e7bcd7e ("{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Perform QP type check in one place and fail as early as possible.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
During QP creation, the mlx5 driver translates the QP type to an
internal value which is passed on to FW. There was no check to make
sure that the translated value is valid, and -EINVAL was coerced into
the mailbox command.
Current firmware refuses this as an invalid QP type, but future/past
firmware may do something else.
Fixes: 09a7d9eca1a6c ('{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc')
Reviewed-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When in switchdev mode, there is no need to do self loopback checks
as we can't receive those packets, we insert steering rules to the
eswitch that make sure packets can't be looped back.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In order to forward traffic from representor's SQ to the right virtual
function, every time an SQ is created also add the corresponding flow rule
to the FDB.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Failure in XRCD FW deallocation command leaves memory leaked and
returns error to the user which he can't do anything about it.
This patch changes behavior to always free memory and always return
success to the user.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The rdma_ah_find_type() accesses the port array based on an index
controlled by userspace. The existing bounds check is after the first use
of the index, so userspace can generate an out of bounds access, as shown
by the KASN report below.
==================================================================
BUG: KASAN: slab-out-of-bounds in to_rdma_ah_attr+0xa8/0x3b0
Read of size 4 at addr ffff880019ae2268 by task ibv_rc_pingpong/409
CPU: 0 PID: 409 Comm: ibv_rc_pingpong Not tainted 4.15.0-rc2-00031-gb60a3faf5b83-dirty #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xe9/0x18f
print_address_description+0xa2/0x350
kasan_report+0x3a5/0x400
to_rdma_ah_attr+0xa8/0x3b0
mlx5_ib_query_qp+0xd35/0x1330
ib_query_qp+0x8a/0xb0
ib_uverbs_query_qp+0x237/0x7f0
ib_uverbs_write+0x617/0xd80
__vfs_write+0xf7/0x500
vfs_write+0x149/0x310
SyS_write+0xca/0x190
entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x7fe9c7a275a0
RSP: 002b:00007ffee5498738 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fe9c7ce4b00 RCX: 00007fe9c7a275a0
RDX: 0000000000000018 RSI: 00007ffee5498800 RDI: 0000000000000003
RBP: 000055d0c8d3f010 R08: 00007ffee5498800 R09: 0000000000000018
R10: 00000000000000ba R11: 0000000000000246 R12: 0000000000008000
R13: 0000000000004fb0 R14: 000055d0c8d3f050 R15: 00007ffee5498560
Allocated by task 1:
__kmalloc+0x3f9/0x430
alloc_mad_private+0x25/0x50
ib_mad_post_receive_mads+0x204/0xa60
ib_mad_init_device+0xa59/0x1020
ib_register_device+0x83a/0xbc0
mlx5_ib_add+0x50e/0x5c0
mlx5_add_device+0x142/0x410
mlx5_register_interface+0x18f/0x210
mlx5_ib_init+0x56/0x63
do_one_initcall+0x15b/0x270
kernel_init_freeable+0x2d8/0x3d0
kernel_init+0x14/0x190
ret_from_fork+0x24/0x30
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff880019ae2000
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 104 bytes to the right of
512-byte region [ffff880019ae2000, ffff880019ae2200)
The buggy address belongs to the page:
page:000000005d674e18 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 00000001000c000c
raw: dead000000000100 dead000000000200 ffff88001a402000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880019ae2100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2180: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
>ffff880019ae2200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880019ae2280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880019ae2300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Disabling lock debugging due to kernel taint
Cc: <stable@vger.kernel.org>
Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Remove use of the num_ports general capability throughout. The number of
ports will be variable in the future, and reported in a different way.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.
The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.
A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
DC Initiator (DCI) QP is represented like any other QP in the hardware.
However, like any other transport QP there are attributes and settings
that are special to DCI QP and needs specific attention and care.
Make necessary changes to configure DCI QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.
Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().
Downstream patches from this series will add support for both DCI and
DCT driver QPs.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch enables QP creation with a given BF index, this allows the
user space driver to share same BF between few QPs or alternatively have
a dedicated BF per QP.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch exposes the option to dynamic allocates a UAR, this
functionality will be used in downstream patch in this series as
part of QP creation.
Specifically, the user space driver asks for a UAR allocation in a given
page index, upon success this UAR and its bfregs can be used as part of
QP creation by the user space driver.
To enable allocating more than 256 UARs the page index is encoded in an
extra one byte just after the command byte.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This patch extends the alloc context flow to be prepared for working
with dynamic UAR allocations.
Currently upon alloc context there is some fix size of UARs that are
allocated (named 'static allocation') and there is no option to user
application to ask for more or control which UAR will be used by which
QP.
In this patch the driver prepares its data structures to manage both the
static and the dynamic allocations and let the user driver knows about
the max value of dynamic blue-flame registers that are allowed.
Downstream patches from this series will enable the dynamic allocation
and the association as part of QP creation.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When working over a RoCE network, the UDP source port should be set only
for statically connected QPs (RC, UC and XRC).
Fixes: 2811ba51b049 ("IB/mlx5: Add RoCE fields to Address Vector")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add the PCI write end padding flag to device_cap_flags enum and set it
during mlx5_ib_query_device so it will be reported to user-space.
During WQ/QP creation, set that capability for WQ/QP if user requested
it and HW supports it.
PCI write end padding modification is not supported for now. There's no
such flag for a QP but for a WQ, create and modify use the same flag.
Return an error if PCI write end padding flag is set during modify_wq.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Some user space application would like to do RSS on the inner
packet fields instead on the outer.
When MLX5_RX_HASH_INNER is set with one or more of the other
hash fields, then the RSS will be done using the inner packet.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The device can support receive Stateless Offloads for the inner
packet's fields only when the packet is processed by TIR which is
enabled to support tunneling. Otherwise, the device treats the
packet as an ordinary non-tunneling packet and receive offloads
can be done only for the outer packet's field.
In order to enable receive Stateless Offloading support for incoming
tunneling traffic the TIR should be created with tunneled_offload_en.
Tunneling offloads is supported only be raw ethernet QP.
This patch includes:
* New QP creation flag for tunneling offloads.
* Reports device capabilities.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Allow creation of a multi-packet receive queue.
In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
before writing the message to memory (e.g. for the IP alignment).
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
References: commit 5fe9dec0d045 ("IB/mlx5: Use blue flame register allocator in mlx5_ib")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Avoid that gcc 7 reports the following warning when building with W=1:
warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Pass to mlx5_core flag to enable rendezvous offload, list_size and CQ
when SRQ created with IB_SRQT_TM.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Set the field to allow posting multi packet send WQEs if hardware
supports this feature. This doesn't mean the send WQEs will be for
multi packet unless the send WQE was prepared according to multi
packet send WQE format.
User space shall use flag MLX5_IB_ALLOW_MPW to check if hardware
supports MPW and allows MPW in SQ context.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Software parsing (SWP) is a feature that can be used to instruct the
device to stop using its internal parser and to parse packets on the
transmit path according to offsets set for each packets.
Through this feature, the device allows the handling of checksum and
LSO by the hardware according to the location of IP and TCP/UDP
headers.
Enable SW parsing on Raw Ethernet send queue by default if firmware
supports it and report these capabilities to user space.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Pick up -rc fixes.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In case we have SQ and RQ for Raw Packet QP, the SQ's event handler
wasn't assigned.
Fixing this by assigning event handler for each WQ after creation.
[ 1877.145243] Call Trace:
[ 1877.148644] <IRQ>
[ 1877.150580] [<ffffffffa07987c5>] ? mlx5_rsc_event+0x105/0x210 [mlx5_core]
[ 1877.159581] [<ffffffffa0795bd7>] ? mlx5_cq_event+0x57/0xd0 [mlx5_core]
[ 1877.167137] [<ffffffffa079208e>] mlx5_eq_int+0x53e/0x6c0 [mlx5_core]
[ 1877.174526] [<ffffffff8101a679>] ? sched_clock+0x9/0x10
[ 1877.180753] [<ffffffff810f717e>] handle_irq_event_percpu+0x3e/0x1e0
[ 1877.188014] [<ffffffff810f735d>] handle_irq_event+0x3d/0x60
[ 1877.194567] [<ffffffff810f9fe7>] handle_edge_irq+0x77/0x130
[ 1877.201129] [<ffffffff81014c3f>] handle_irq+0xbf/0x150
[ 1877.207244] [<ffffffff815ed78a>] ? atomic_notifier_call_chain+0x1a/0x20
[ 1877.214829] [<ffffffff815f434f>] do_IRQ+0x4f/0xf0
[ 1877.220498] [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d
[ 1877.227025] <EOI>
[ 1877.228967] [<ffffffff814834e2>] ? cpuidle_enter_state+0x52/0xc0
[ 1877.236990] [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200
[ 1877.243676] [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30
[ 1877.249831] [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290
[ 1877.256513] [<ffffffff815cfee1>] start_secondary+0x265/0x27b
[ 1877.263111] Code: Bad RIP value.
[ 1877.267296] RIP [< (null)>] (null)
[ 1877.273264] RSP <ffff88046fd63df8>
[ 1877.277531] CR2: 0000000000000000
Fixes: 19098df2da78 ("IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We observed multiple times on our Lustre OSS servers that when
the system memory is fragmented, kmalloc() in create_kernel_qp()
could fail order 4/5 allocations while we still have many free pages.
Switch to kvmalloc_array() to allow the operation to contine.
Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
