summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mlx5/main.c
AgeCommit message (Collapse)Author
2015-12-23IB/mlx5: Add support for hca_core_clock and timestamp_maskMatan Barak
Reporting the hca_core_clock (in kHZ) and the timestamp_mask in query_device extended verb. timestamp_mask is used by users in order to know what is the valid range of the raw timestamps, while hca_core_clock reports the clock frequency that is used for timestamps. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support RoCEAchiad Shochat
Advertise RoCE support for IB/core layer and set the hardware to work in RoCE mode. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Add RoCE fields to Address VectorAchiad Shochat
Set the address handle and QP address path fields according to the link layer type (IB/Eth). Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support IB device's callbacks for adding/deleting GIDsAchiad Shochat
These callbacks write into the mlx5 RoCE address table. Upon del_gid we write a zero'd GID. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Extend query_device/port to support RoCEAchiad Shochat
Using the vport access functions to retrieve the Ethernet specific information and return this information in ib_query_device and ib_query_port. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support IB device's callback for getting its netdevAchiad Shochat
For Eth ports only: Maintain a net device pointer in mlx5_ib_device and update it upon NETDEV_REGISTER and NETDEV_UNREGISTER events if the net-device and IB device have the same PCI parent device. Implement the get_netdev callback to return this net device. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support IB device's callback for getting the link layerAchiad Shochat
Make the existing mlx5_ib_port_link_layer() signature match the ib device callback signature (add port_num parameter). Refactor it to use a sub function so that the link layer could be queried also before the ibdev is created. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-11-07Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is my initial round of 4.4 merge window patches. There are a few other things I wish to get in for 4.4 that aren't in this pull, as this represents what has gone through merge/build/run testing and not what is the last few items for which testing is not yet complete. - "Checksum offload support in user space" enablement - Misc cxgb4 fixes, add T6 support - Misc usnic fixes - 32 bit build warning fixes - Misc ocrdma fixes - Multicast loopback prevention extension - Extend the GID cache to store and return attributes of GIDs - Misc iSER updates - iSER clustering update - Network NameSpace support for rdma CM - Work Request cleanup series - New Memory Registration API" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (76 commits) IB/core, cma: Make __attribute_const__ declarations sparse-friendly IB/core: Remove old fast registration API IB/ipath: Remove fast registration from the code IB/hfi1: Remove fast registration from the code RDMA/nes: Remove old FRWR API IB/qib: Remove old FRWR API iw_cxgb4: Remove old FRWR API RDMA/cxgb3: Remove old FRWR API RDMA/ocrdma: Remove old FRWR API IB/mlx4: Remove old FRWR API support IB/mlx5: Remove old FRWR API support IB/srp: Dont allocate a page vector when using fast_reg IB/srp: Remove srp_finish_mapping IB/srp: Convert to new registration API IB/srp: Split srp_map_sg RDS/IW: Convert to new memory registration API svcrdma: Port to new memory registration API xprtrdma: Port to new memory registration API iser-target: Port to new memory registration API IB/iser: Port to new fast registration API ...
2015-10-28IB/mlx5: Remove old FRWR API supportSagi Grimberg
No ULP uses it anymore, go ahead and remove it. Keep only the local invalidate part of the handlers. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-28IB/mlx5: Support the new memory registration APISagi Grimberg
Support the new memory registration API by allocating a private page list array in mlx5_ib_mr and populate it when mlx5_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR by setting the exact WQE as IB_WR_FAST_REG_MR, just take the needed information from different places: - page_size, iova, length, access flags (ib_mr) - page array (mlx5_ib_mr) - key (ib_reg_wr) The IB_WR_FAST_REG_MR handlers will be removed later when all the ULPs will be converted. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-15mlx5: stop including <asm-generic/kmap_types.h>Christoph Hellwig
<linux/highmem.h> is the placace the get the kmap type flags, asm-generic files are generic implementations only to be used by architecture code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-09-25IB/mlx5: Remove pa_lkey usagesSagi Grimberg
Since mlx5 driver cannot rely on registration using the reserved lkey (global_dma_lkey) it used to allocate a private physical address lkey for each allocated pd. Commit 96249d70dd70 ("IB/core: Guarantee that a local_dma_lkey is available") just does it in the core layer so we can go ahead and use that. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-25IB/mlx5: Remove support for IB_DEVICE_LOCAL_DMA_LKEYSagi Grimberg
Commit 96249d70dd70 ("IB/core: Guarantee that a local_dma_lkey is available") allows ULPs that make use of the local dma key to keep working as before by allocating a DMA MR with local permissions and converted these consumers to use the MR associated with the PD rather then device->local_dma_lkey. ConnectIB has some known issues with memory registration using the local_dma_lkey (SEND, RDMA, RECV seems to work ok). Thus don't expose support for it (remove device->local_dma_lkey setting), and take advantage of the above commit such that no regression is introduced to working systems. The local_dma_lkey support will be restored in CX4 depending on FW capability query. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/mlx5: Remove ib_get_dma_mr callsJason Gunthorpe
The pd now has a local_dma_lkey member which completely replaces ib_get_dma_mr, use it instead. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30mlx5: Drop mlx5_ib_alloc_fast_reg_mrSagi Grimberg
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB: Modify ib_create_mr APISagi Grimberg
Use ib_alloc_mr with specific parameters. Change the existing callers. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/core: Get rid of redundant verb ib_destroy_mrSagi Grimberg
This was added in a thought of uniting all mr allocation and deallocation routines but the fact is we have a single deallocation routine already, ib_dereg_mr. And, move mlx5_ib_destroy_mr specific logic into mlx5_ib_dereg_mr (includes only signature stuff for now). And, fixup the only callers (iser/isert) accordingly. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx4, mlx5, mthca: Expose max_sge_rd correctlySagi Grimberg
Applications must not assume that max_sge and max_sge_rd are the same, Hence expose max_sge_rd correctly as well. Reported-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx5: Expose correct page_size_cap in device attributesSagi Grimberg
Should be all the page sizes that are supported by the device. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx5: Fix missing device local_dma_lkeySagi Grimberg
The mlx5 driver exposes device capability IB_DEVICE_LOCAL_DMA_LKEY but does not set the the device local_dma_lkey. This breaks rpcrdma drivers. Query and set this lkey when creating the device resources. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-12IB/core: Add ability for drivers to report an alternate MAD size.Ira Weiny
Add max MAD size to the device immutable data set and have all drivers that support MADs report the current IB MAD size (IB_MGMT_MAD_SIZE) to the core. Verify MAD size data in both the MAD core and when reading the immutable data. OPA drivers will report alternate MAD sizes in subsequent patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Pass hardware specific data in query_deviceMatan Barak
Vendors should be able to pass vendor specific data to/from user-space via query_device uverb. In order to do this, we need to pass the vendors' specific udata. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Change ib_create_cq to use struct ib_cq_init_attrMatan Barak
Currently, ib_create_cq uses cqe and comp_vecotr instead of the extendible ib_cq_init_attr struct. Earlier patches already changed the vendors to work with ib_cq_init_attr. This patch changes the consumers too. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Change provider's API of create_cq to be extendibleMatan Barak
Add a new ib_cq_init_attr structure which contains the previous cqe (minimum number of CQ entries) and comp_vector (completion vector) in addition to a new flags field. All vendors' create_cq callbacks are changed in order to work with the new API. This commit does not change any functionality. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2 Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-11net/mlx5e: Fix HW MTU settingsSaeed Mahameed
Previously we configured HW MTU to be netdev->mtu, actually we need to configure netdev->mtu + (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN). Also, query MTU can not fail, hence make the relevant helper a void functionm, add mlx5e_set_dev_port_mtu, helper function to handle MTU setting. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04mlx5: Enable mutual support for IB and EthernetHaggai Abramonvsky
Ethernet functionality is only available when working in ISSI > 0 mode. Previously, the IB driver wasn't ready to work on that mode, and hence building both the IB driver and the Ethernet functionality in the core driver were disallowed by Kconfigs. Now, once we have all the pre-steps in place, we can remove this limitation. The last steps in the IB driver for getting that setup to work are: create dummy SRQ for the driver's use (until now we could use XRC_SRQ as SRQ and XRC_SRQ, after moving to ISSI > 0, we separate XRC SRQs from basic SRQs) and adapt the create QP function to be compatible with ISSI > 0. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04IB/mlx5: Don't create IB instance over Ethernet portsMajd Dibbiny
Since we still don't have RoCE support in mlx5, avoid creating IB driver instance over Ethernet ports. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 modeMajd Dibbiny
In ISSI > 0 mode, most of the MAD_IFC command features are deprecated, and can't be used. Therefore, when in that mode, we replace all of them with other commands that provide the required functionality. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: New device capabilities handlingSaeed Mahameed
- Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-20IB/core: Convert core to use bitfield for capsIra Weiny
Remove query_protocol callback Use the new Core Capability bits for: rdma_protocol_* rdma_cap_ib_mad rdma_cap_ib_smi rdma_cap_ib_cm rdma_cap_iw_cm rdma_cap_ib_sa rdma_cap_ib_mcast rdma_cap_af_ib rdma_cap_eth_ah Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20IB/core: Add per port immutable struct to ib_deviceIra Weiny
As of commit 5eb620c81ce3 "IB/core: Add helpers for uncached GID and P_Key searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in the ib_device. The per port core capability flags to be added later are also immutable data to be stored in the ib_device object. In preparation for this create a structure for per port immutable data and place the pkey and gid table lengths within this structure. "get_port_immutable" is added as a mandatory device function to allow the drivers to fill in this data. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18IB/Verbs: Implement new callback query_protocol()Michael Wang
Add new callback query_protocol() and implement for each HW. Mapping List: node-type link-layer transport protocol nes RNIC ETH IWARP IWARP amso1100 RNIC ETH IWARP IWARP cxgb3 RNIC ETH IWARP IWARP cxgb4 RNIC ETH IWARP IWARP usnic USNIC_UDP ETH USNIC_UDP USNIC_UDP ocrdma IB_CA ETH IB IBOE mlx4 IB_CA IB/ETH IB IB/IBOE mlx5 IB_CA IB IB IB ehca IB_CA IB IB IB ipath IB_CA IB IB IB mthca IB_CA IB IB IB qib IB_CA IB IB IB Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-02net/mlx5_core: Extend struct mlx5_interface to support multiple protocolsSaeed Mahameed
Preparation for ethernet driver. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Move completion eqs from mlx5_ib to mlx5_coreSaeed Mahameed
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02IB/mlx5: Fix Mellanox copyright noteSaeed Mahameed
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20Merge branches 'core', 'cxgb4', 'iser', 'mlx4', 'mlx5', 'ocrdma', 'odp', ↵Roland Dreier
'qib' and 'srp' into for-next
2015-02-18IB/mlx5: Enable the ODP capability query verbHaggai Eran
Re-enable the on-demand paging capability query through the extended query device verb. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx5: Fix error code in get_port_caps()Dan Carpenter
The current code returns success when kmalloc() fails. It should return an error code, -ENOMEM. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-06Revert "IB/core: Add support for extended query device caps"Yann Droneaud
While commit 7e36ef8205ff ("IB/core: Temporarily disable ex_query_device uverb") is correct as it makes the extended QUERY_DEVICE uverb (which came as part of commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support")) not available to userspace, it doesn't address the initial issue regarding ib_copy_to_udata() [1][2]. Additionally, further discussions around this new uverb seems to conclude it would require a different data structure than the one currently described in <rdma/ib_user_verbs.h> [3]. Both of these issues require a revert of the changes, so this patch partially reverts commit 8cdd312cfed7 ("IB/mlx5: Implement the ODP capability query verb") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support") and fully reverts commit 5a77abf9a97a ("IB/core: Add support for extended query device caps"). [1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps" http://mid.gmane.org/1418733236.2779.26.camel@opteya.com [2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb" http://mid.gmane.org/1423067503.3030.83.camel@opteya.com [3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask" http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com Cc: Eli Cohen <eli@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/mlx5: Implement on demand paging by adding support for MMU notifiersHaggai Eran
* Implement the relevant invalidation functions (zap MTTs as needed) * Implement interlocking (and rollback in the page fault handlers) for cases of a racing notifier and fault. * With this patch we can now enable the capability bits for supporting RC send/receive/RDMA read/RDMA write, and UD send. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/mlx5: Page faults handling infrastructureHaggai Eran
* Refactor MR registration and cleanup, and fix reg_pages accounting. * Create a work queue to handle page fault events in a kthread context. * Register a fault handler to get events from the core for each QP. The registered fault handler is empty in this patch, and only a later patch implements it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-15IB/mlx5: Implement the ODP capability query verbHaggai Eran
The patch adds infrastructure to query ODP capabilities in the mlx5 driver. The code will read the capabilities from the device, and enable only those capabilities that both the driver and the device supports. At this point ODP is not supported, so no capability is copied from the device, but the patch exposes the global ODP device capability bit. Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-19Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/RDMA updates from Roland Dreier: - large set of iSER initiator improvements - hardware driver fixes for cxgb4, mlx5 and ocrdma - small fixes to core midlayer * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (47 commits) RDMA/cxgb4: Fix ntuple calculation for ipv6 and remove duplicate line RDMA/cxgb4: Add missing neigh_release in find_route RDMA/cxgb4: Take IPv6 into account for best_mtu and set_emss RDMA/cxgb4: Make c4iw_wr_log_size_order static IB/core: Fix XRC race condition in ib_uverbs_open_qp IB/core: Clear AH attr variable to prevent garbage data RDMA/ocrdma: Save the bit environment, spare unncessary parenthesis RDMA/ocrdma: The kernel has a perfectly good BIT() macro - use it RDMA/ocrdma: Don't memset() buffers we just allocated with kzalloc() RDMA/ocrdma: Remove a unused-label warning RDMA/ocrdma: Convert kernel VA to PA for mmap in user RDMA/ocrdma: Get vlan tag from ib_qp_attrs RDMA/ocrdma: Add default GID at index 0 IB/mlx5, iser, isert: Add Signature API additions Target/iser: Centralize ib_sig_domain setting IB/iser: Centralize ib_sig_domain settings IB/mlx5: Use extended internal signature layout IB/iser: Set IP_CSUM as default guard type IB/iser: Remove redundant assignment IB/mlx5: Use enumerations for PI copy mask ...
2014-10-09IB/mlx5: Fix possible array overflowEli Cohen
The check to verify that userspace does not provide an invalid index to the micro UAR was placed too late. Fix this by moving the check before using the index. Reported by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/mlx5: Clear umr resources after ib_unregister_deviceEli Cohen
Some ULPs may make use of resources created in create_umr_res so make sure to call destroy_umrc_res after returning from ib_unregister_device, which makes sure all ULPs have closed their resources. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-03net/mlx5_core: Update device capabilities handlingEli Cohen
Rearrange struct mlx5_caps so it has a "gen" field to represent the current capabilities configured for the device. Max capabilities can also be queried from the device. Also update capabilities struct to contain more fields as per the latest revision if firmware specification. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30mlx5: Adjust events to use unsigned long param instead of void *Jack Morgenstein
In the event flow, we currently pass only a port number in the void *data argument. Rather than pass a pointer to the event handlers, we should use an "unsigned long" parameter, and pass the port number value directly. In the future, if necessary for some events, we can use the unsigned long parameter to pass a pointer. Based on a patch by Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30mlx5: minor fixes (mainly avoidance of hidden casts)Jack Morgenstein
There were many places where parameters which should be u8/u16 were integer type. Additionally, in 2 places, a check for a non-null pointer was added before dereferencing the pointer (this is actually a bug fix). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30mlx5: Move pci device handling from mlx5_ib to mlx5_coreJack Morgenstein
In preparation for a new mlx5 device which is VPI (i.e., ports can be either IB or ETH), move the pci device functionality from mlx5_ib to mlx5_core. This involves the following changes: 1. Move mlx5_core_dev struct out of mlx5_ib_dev. mlx5_core_dev is now an independent structure maintained by mlx5_core. mlx5_ib_dev now has a pointer to that struct. This requires changing a lot of places where the core_dev struct was accessed via mlx5_ib_dev (now, this needs to be a pointer dereference). 2. All PCI initializations are now done in mlx5_core. Thus, it is now mlx5_core which does pci_register_device (and not mlx5_ib, as was previously). 3. mlx5_ib now registers itself with mlx5_core as an "interface" driver. This is very similar to the mechanism employed for the mlx4 (ConnectX) driver. Once the HCA is initialized (by mlx5_core), it invokes the interface drivers to do their initializations. 4. There is a new event handler which the core registers: mlx5_core_event(). This event handler invokes the event handlers registered by the interfaces. Based on a patch by Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:32:09 +0000