| Age | Commit message (Collapse) | Author |
|---|
|
The mlx4 driver uses a special QP to implement the GSI QP. This kind
of QP allows to build the InfiniBand headers in software.
When mlx4 hardware builds the packet, it calculates the ICRC and puts
it at the end of the payload. However, this ICRC calculation depends
on the QP configuration, which is determined when the QP is modified
(roce_mode during INIT->RTR).
When receiving a packet, the ICRC verification doesn't depend on this
configuration.
Therefore, using two GSI QPs for send (one for each RoCE version) and
one GSI QP for receive are required.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
RoCEv2 packets are sent over IP/UDP protocols.
The mlx4 driver uses a type of RAW QP to send packets for QP1 and
therefore needs to build the network headers below BTH in software.
This patch adds option to build QP1 packets with IP and UDP headers if
RoCEv2 is requested.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
If the hardware supports RoCE v2, we configure the hardware UDP
port according to the RoCE v2 Annex when mlx4_ib device is added.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In order to support modify_qp for RoCE v2, we need to set
the gid_type in the QP context.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
To tell hardware about a gid with type RoCEv2, software needs a new
modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can
replace the old method, MLX4_SET_PORT_GID_TABLE, for RoCEv1 gids.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
IB core driver adds a property of type to struct ib_gid_attr.
The mlx4 driver should take that in consideration when modifying or
querying the hardware gid table.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In commit dbf727de7440 ("IB/core: Use GID table in AH creation and dmac
resolution") we copy source mac to mlx4_ah from the attributes of
gid at ib_ah_attr.grh.sgid_index. Now we can use it.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Hop limit value wasn't copied from attributes when ah was created.
This may influence packets for unconnected services to get dropped in
routers when endpoints are not in the same subnet.
Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
|
|
Convert kmalloc to be kmalloc_array to fix warnings below:
WARNING: Prefer kmalloc_array over kmalloc with multiply
+ qp->sq.wrid = kmalloc(qp->sq.wqe_cnt * sizeof(u64),
WARNING: Prefer kmalloc_array over kmalloc with multiply
+ qp->rq.wrid = kmalloc(qp->rq.wqe_cnt * sizeof(u64),
WARNING: Prefer kmalloc_array over kmalloc with multiply
+ srq->wrid = kmalloc(srq->msrq.max * sizeof(u64),
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Failure in kmalloc memory allocations will throw a warning about it.
Such warnings are not needed anymore, since in commit 0ef2f05c7e02
("IB/mlx4: Use vmalloc for WR buffers when needed"), fallback mechanism
from kmalloc() to __vmalloc() was added.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
ib_ud_header_init() is used to format InfiniBand headers
in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is
required that this function would be able to build also IP and UDP
headers.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Commit 0ef2f05c7e02ff99c0b5b583d7dee2cd12b053f2 uses vmalloc for WR buffers
when needed and uses kvfree to free the buffers. It missed changing kfree
to kvfree in mlx4_ib_destroy_srq().
Reported-by: Matthew Finaly <matt@Mellanox.com>
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Conflicts:
drivers/net/geneve.c
Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are several hits that WR buffer allocation(kmalloc) failed.
It failed at order 3 and/or 4 contigous pages allocation. At the same time
there are actually 100MB+ free memory but well fragmented.
So try vmalloc when kmalloc failed.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
mlx4 devices (ConnectX-2, ConnectX-3) has a limitation
where rdma read work queue entries cannot exceed 512 bytes.
A rdma_read wqe needs to fit in 512 bytes:
- wqe control segment (16 bytes)
- rdma segment (16 bytes)
- scatter elements (16 bytes each)
So max_sge_rd should be: (512 - 16 - 16) / 16 = 30.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Under HA mode, it's possible that the VF registered its GID
(and expects to get mads through the PV scheme) on a port which is
different from the one this mad arrived on, due to HA fail over.
Therefore, if the gid is not matched on the port that the packet arrived
on, check for a match on the other port if HA mode is active -- and if a
match is found on the other port, continue processing the mad using that
other port.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No ULP uses it anymore, go ahead and remove it.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Support the new memory registration API by allocating a
private page list array in mlx4_ib_mr and populate it when
mlx4_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by setting the exact WQE as IB_WR_FAST_REG_MR, just take the
needed information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (mlx4_ib_mr)
- key (ib_reg_wr)
The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
|
|
Previously, vlan id and source MAC were used from QP attributes. Since
the net device is now stored in the GID attributes, they could be used
instead of getting this information from the QP attributes.
IB_QP_SMAC, IB_QP_ALT_SMAC, IB_QP_VID and IB_QP_ALT_VID were removed
because there is no known libibverbs that uses them.
This commit also modifies the vendors (mlx4, ocrdma) drivers in order
to use the new approach.
ocrdma driver changes were done by Somnath Kotur <Somnath.Kotur@Avagotech.Com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Adding an ability to query the IB cache by a netdev and get the
attributes of a GID. These parameters are necessary in order to
successfully resolve the required GID (when the netdevice is known)
and get the Ethernet L2 attributes from a GID.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is now supported downstream.
In addition, this flag was supported only for IB_QPT_UD, now, with the
new implementation it is supported for all QP types.
Support IB_USER_VERBS_EX_CMD_CREATE_QP in order to get the flag from
user space using the extension create qp command.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Current implementation for MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is not
supported when link layer is Ethernet.
This patch will add counter based implementation for multicast loopback
prevention. HW can drop multicast loopback packets if sender QP counter
index is equal to receiver QP counter index. If qp flag
MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK is set and link layer is Ethernet,
create a new counter and attach it to the QP so it will continue
receiving multicast loopback traffic but it's own.
The decision if to create a new counter is being made at the qp
modification to RTR after the QP's port is set. When QP is destroyed or
moved back to reset state, delete the counter.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This is an infrastructure step for allocating and attaching more than
one counter to QPs on the same port. Allocate a counters table and
manage the insertion and removals of the counters in load and unload of
mlx4 IB.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch split up struct ib_send_wr so that all non-trivial verbs
use their own structure which embedds struct ib_send_wr. This dramaticly
shrinks the size of a WR for most common operations:
sizeof(struct ib_send_wr) (old): 96
sizeof(struct ib_send_wr): 48
sizeof(struct ib_rdma_wr): 64
sizeof(struct ib_atomic_wr): 96
sizeof(struct ib_ud_wr): 88
sizeof(struct ib_fast_reg_wr): 88
sizeof(struct ib_bind_mw_wr): 96
sizeof(struct ib_sig_handover_wr): 80
And with Sagi's pending MR rework the fast registration WR will also be
down to a reasonable size:
sizeof(struct ib_fastreg_wr): 64
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt]
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc]
Tested-by: Haggai Eran <haggaie@mellanox.com>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
|
|
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull inifiniband/rdma updates from Doug Ledford:
"This is a fairly sizeable set of changes. I've put them through a
decent amount of testing prior to sending the pull request due to
that.
There are still a few fixups that I know are coming, but I wanted to
go ahead and get the big, sizable chunk into your hands sooner rather
than waiting for those last few fixups.
Of note is the fact that this creates what is intended to be a
temporary area in the drivers/staging tree specifically for some
cleanups and additions that are coming for the RDMA stack. We
deprecated two drivers (ipath and amso1100) and are waiting to hear
back if we can deprecate another one (ehca). We also put Intel's new
hfi1 driver into this area because it needs to be refactored and a
transfer library created out of the factored out code, and then it and
the qib driver and the soft-roce driver should all be modified to use
that library.
I expect drivers/staging/rdma to be around for three or four kernel
releases and then to go away as all of the work is completed and final
deletions of deprecated drivers are done.
Summary of changes for 4.3:
- Create drivers/staging/rdma
- Move amso1100 driver to staging/rdma and schedule for deletion
- Move ipath driver to staging/rdma and schedule for deletion
- Add hfi1 driver to staging/rdma and set TODO for move to regular
tree
- Initial support for namespaces to be used on RDMA devices
- Add RoCE GID table handling to the RDMA core caching code
- Infrastructure to support handling of devices with differing read
and write scatter gather capabilities
- Various iSER updates
- Kill off unsafe usage of global mr registrations
- Update SRP driver
- Misc mlx4 driver updates
- Support for the mr_alloc verb
- Support for a netlink interface between kernel and user space cache
daemon to speed path record queries and route resolution
- Ininitial support for safe hot removal of verbs devices"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits)
IB/ipoib: Suppress warning for send only join failures
IB/ipoib: Clean up send-only multicast joins
IB/srp: Fix possible protection fault
IB/core: Move SM class defines from ib_mad.h to ib_smi.h
IB/core: Remove unnecessary defines from ib_mad.h
IB/hfi1: Add PSM2 user space header to header_install
IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY
mlx5: Fix incorrect wc pkey_index assignment for GSI messages
IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow
IB/uverbs: reject invalid or unknown opcodes
IB/cxgb4: Fix if statement in pick_local_ip6adddrs
IB/sa: Fix rdma netlink message flags
IB/ucma: HW Device hot-removal support
IB/mlx4_ib: Disassociate support
IB/uverbs: Enable device removal when there are active user space applications
IB/uverbs: Explicitly pass ib_dev to uverbs commands
IB/uverbs: Fix race between ib_uverbs_open and remove_one
IB/uverbs: Fix reference counting usage of event files
IB/core: Make ib_dealloc_pd return void
IB/srp: Create an insecure all physical rkey only if needed
...
|
|
Implements the IB core disassociate_ucontext API. The driver detaches the HW
resources for a given user context to prevent a dependency between application
termination and device disconnecting. This is done by managing the VMAs that
were mapped to the HW bars such as door bell and blueflame. When need to detach
remap them to an arbitrary kernel page returned by the zap API.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When handling a device internal error, the driver is responsible to
drain the completion queue with flush errors.
In case a completion queue was assigned to multiple send queues, the
driver iterates over the send queues and generates flush errors of
inflight wqes. The driver must correctly pass the wc array with an
offset as a result of the previous send queue iteration. Not doing so
will overwrite previously set completions and return a wrong number
of polled completions which includes ones which were not correctly set.
Fixes: 35f05dabf95a (IB/mlx4: Reset flow support for IB kernel ULPs)
Signed-off-by: Ariel Nahum <arieln@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The mlx4 IB driver implementation for ib_query_ah used a wrong offset
(28 instead of 29) when link type is Ethernet. Fixed to use the correct one.
Fixes: fa417f7b520e ('IB/mlx4: Add support for IBoE')
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The pkey mapping for RoCE must remain the default mapping:
VFs:
virtual index 0 = mapped to real index 0 (0xFFFF)
All others indices: mapped to a real pkey index containing an
invalid pkey.
PF:
virtual index i = real index i.
Don't allow users to change these mappings using files found in
sysfs.
Fixes: c1e7e466120b ('IB/mlx4: Add iov directory in sysfs under the ib device')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The mcg "too many pending requests" warning message fills the log
when OpenSM is downed. Demote the message from warning level to
debug level.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
send_mad_to_wire takes the same spinlock that is taken in
the interrupt context. Therefore, it needs irqsave/restore.
Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Manage RoCE gid table with logic in IB/core, which is common to all
vendors, and remove the mechanism from the mlx4 IB driver.
Since management of the GID cache may lead to index mismatch with the
hardware GID table, a translation between indexes is required when
modifying a QP or creating an address handle.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
get_netdev: get the net_device on the physical port of the IB transport port. In
port aggregation mode it is required to return the netdev of the active port.
modify_gid: note for a change in the RoCE gid cache. Handle this by writing to
the harsware GID table. It is possible that indexes in cahce and hardware tables
won't match so a translation is required when modifying a QP or creating an
address handle.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Applications must not assume that max_sge and max_sge_rd are the same,
Hence expose max_sge_rd correctly as well.
Reported-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
To add Hardware accelerated support in 802.1ad vlan, replace
Current VLAN macros to CVLAN.
Replace:
MLX4_WQE_CTRL_INS_VLAN
MLX4_CQE_VLAN_PRESENT_MASK
With:
MLX4_WQE_CTRL_INS_CVLAN
MLX4_CQE_CVLAN_PRESENT_MASK
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is little chance our memory allocation will fail, so we can
combine initializing the work structs with allocating them instead of
looping through all of them once to allocate and again to initialize.
Then when we need to actually find out if our device is up or in the
process of going down, have all of our work structs batched up, take the
spin_lock once and only once, and do all of the batch under the one
spin_lock invocation instead of incurring all of the locked memory cycles
we would otherwise incur to take/release the spin_lock over and over
again.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We create a number of work structs to be queued up to a workqueue, and
on completion of the workqueue handler, the workqueue handler frees the
allocated memory. If, however, we don't queue the work struct because
the device is going down, then we need to free the memory ourselves.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
On failure, we loop through all possible pointers and test them before
calling kfree. But really, why even attempt to free items we didn't
allocate when we can easily loop through exactly and only the devices
for which the original memory allocation succeeded and free just those.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
For IB links, reading HCA flow counters through iboe_process_mad() should
be used when mlx4_ib_process_mad() is invoked only for VFs PMA queries and
exactly nothing else.
Fixes: 7193a141eb74 ('IB/mlx4: Set VF to read from QP counters')
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
mlx4 VFs can provide CQE raw time-stamping services, but they
don't have the hca core clock mapped to their PCI bars.
As such, we should not attempt to query and report the clock offset
to user space for VFs. Doing so causes query_device over VFs to fail
with -ENOSUPP.
Fixes: 4b664c4355b2 ('IB/mlx4: Add support for CQ time-stamping')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We recently added BUG_ON's which were inappropriate for a condition which
should never happen. Change these to be WARN_ON_ONCE as a debugging aid.
Fixes: 4cd7c9479aff ('IB/mad: Add support for additional MAD info to/from drivers')
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Pull networking updates from David Miller:
1) Add TX fast path in mac80211, from Johannes Berg.
2) Add TSO/GRO support to ibmveth, from Thomas Falcon
3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.
4) Lots of new rhashtable tests, from Thomas Graf.
5) Run ingress qdisc lockless, from Alexei Starovoitov.
6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.
7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.
8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.
9) Move page frag allocator under mm/, also from Alexander.
10) Add xmit_more support to hv_netvsc, from KY Srinivasan.
11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.
12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.
13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.
14) Add netdev driver for GENEVE tunnels, from John W Linville.
15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.
16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.
17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.
18) Add tail call support to BPF, from Alexei Starovoitov.
19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.
20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.
21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.
22) Add Cavium ThunderX driver, from Sunil Goutham.
23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.
24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.
25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.
26) Add more entropy inputs to flow dissector, from Tom Herbert.
27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.
28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.
29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...
|
|
This is an infrastructure step for querying VF and PF counters.
This code was in the IB driver, move it to the mlx4 core driver
so it will be accessible for more use cases.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
