summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hns/hns_roce_main.c
AgeCommit message (Collapse)Author
2021-06-21RDMA/hns: Use IDA interface to manage pd indexYangyang Li
Switch pd index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-6-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-21RDMA/hns: Use IDA interface to manage mtpt indexYangyang Li
Switch mtpt index allocation and release from hns own bitmap interface to IDA interface. Link: https://lore.kernel.org/r/1623325814-55737-5-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-01RDMA/hns: Support configuring doorbell mode of RQ and CQYixian Liu
HIP08 supports both normal and record doorbell mode for RQ and CQ, SQ record doorbell for userspace is also supported by the software for flushing CQE process. As now the capability of HIP08 are exposed to the user and are configurable, the support of normal doorbell should be added back. Note that, if switching to normal doorbell, the kernel will report "flush cqe is unsupported" if modify qp to error status as the flush is based on record doorbell. Link: https://lore.kernel.org/r/1616840738-7866-2-git-send-email-liweihang@huawei.com Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-04-01RDMA/hns: Support congestion control type selection according to the FWYangyang Li
The type of congestion control algorithm includes DCQCN, LDCP, HC3 and DIP. The driver will select one of them according to the firmware when querying PF capabilities, and then set the related configuration fields into QPC. Link: https://lore.kernel.org/r/1616679236-7795-3-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26RDMA: Support more than 255 rdma portsMark Bloch
Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-23RDMA/hns: Support to query firmware versionLang Cheng
Implement the ops named get_dev_fw_str to support ib_get_device_fw_str(). Link: https://lore.kernel.org/r/1615882161-53827-1-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-11RDMA/hns: Add support for XRC on HIP09Wenpeng Liang
The HIP09 supports XRC transport service, it greatly saves the number of QPs required to connect all processes in a large cluster. Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-16RDMA/hns: Adjust definition of FRMR fieldsYixing Liu
FRMR is not well-supported on HIP08, it is re-designed for HIP09 and the position of related fields is changed. Then the ULPs should be forbidden to use FRMR on older hardwares. Link: https://lore.kernel.org/r/1612924424-28217-1-git-send-email-liweihang@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Avoid filling sgid index when modifying QP to RTRWeihang Li
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want to record sgid index into QPC. For UD QPs, it is useless because it will be included in WQE. For RC QPs, it will be filled in hns_roce_set_path(). So sgid index shouldn't be filled by default. Then hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called in it. Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC") Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/hns: Fixed wrong judgments in the goto branchWenpeng Liang
When an error occurs, the qp_table must be cleared, regardless of whether the SRQ feature is enabled. Fixes: 5c1f167af112 ("RDMA/hns: Init SRQ table for hip08") Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-18RDMA/hns: Create CQ with selected CQN for bank load balanceYangyang Li
In order to improve performance by balancing the load between different banks of cache, the CQC cache is desigend to choose one of 4 banks according to lower 2 bits of CQN. The hns driver needs to count the number of CQ on each bank and then assigns the CQ being created to the bank with the minimum load first. Link: https://lore.kernel.org/r/1610008589-35770-1-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-11RDMA/hns: Fix incorrect symbol typesWenpeng Liang
Types of some fields, variables and parameters of some functions should be unsigned. Link: https://lore.kernel.org/r/1607650657-35992-10-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-11RDMA/hns: Fix coding style issuesLang Cheng
Just format the code without modifying anything, including fixing some redundant and missing blanks and spaces and changing the variable definition order. Link: https://lore.kernel.org/r/1607650657-35992-8-git-send-email-liweihang@huawei.com Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-11RDMA/hns: Normalization the judgment of some featuresWenpeng Liang
Whether to enable the these features should better depend on the enable flags, not the value of related fields. Fixes: 5c1f167af112 ("RDMA/hns: Init SRQ table for hip08") Fixes: 3cb2c996c9dc ("RDMA/hns: Add support for SCCC in size of 64 Bytes") Link: https://lore.kernel.org/r/1607650657-35992-3-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-11RDMA/hns: Limit the length of data copied between kernel and userspaceWenpeng Liang
For ib_copy_from_user(), the length of udata may not be the same as that of cmd. For ib_copy_to_user(), the length of udata may not be the same as that of resp. So limit the length to prevent out-of-bounds read and write operations from ib_copy_from_user() and ib_copy_to_user(). Fixes: de77503a5940 ("RDMA/hns: RDMA/hns: Assign rq head pointer when enable rq record db") Fixes: 633fb4d9fdaa ("RDMA/hns: Use structs to describe the uABI instead of opencoding") Fixes: ae85bf92effc ("RDMA/hns: Optimize qp param setup flow") Fixes: 6fd610c5733d ("RDMA/hns: Support 0 hop addressing for SRQ buffer") Fixes: 9d9d4ff78884 ("RDMA/hns: Update the kernel header file of hns") Link: https://lore.kernel.org/r/1607650657-35992-2-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07RDMA/hns: Move capability flags of QP and CQ to hns-abi.hWeihang Li
These flags will be returned to the userspace through ABI, so they should be defined in hns-abi.h. Furthermore, there is no need to include hns-abi.h in every source files, it just needs to be included in the common header file. Link: https://lore.kernel.org/r/1606872560-17823-1-git-send-email-liweihang@huawei.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-26RDMA/hns: Add UD support for HIP09Weihang Li
HIP09 supports service type of Unreliable Datagram, add necessary process to enable this feature. Link: https://lore.kernel.org/r/1605526408-6936-7-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-28RDMA/hns: Add support for filling GMV tableWeihang Li
Add a interface to fill GMV(SGID/SMAC/VLAN) table for HIP09, all of above source address information is stored as an entry in GMV table. The users just need to provide the index to the hardware when POST SEND. Link: https://lore.kernel.org/r/1603508836-33054-3-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-28RDMA/hns: Add support for configuring GMV tableWeihang Li
HIP09 supports to store SGID/SMAC/VLAN together in a table named GMV. The driver needs to allocate memory for it and tell the information about this region to hardware. Link: https://lore.kernel.org/r/1603508836-33054-2-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove uverbs cmds from drivers that don't use themJason Gunthorpe
Allowing userspace to invoke these commands is probably going to crash these drivers as they are not tested and not expecting to use them on a user object. For example pvrdma touches cq->ring_state which is not initialized for user QPs. These commands are effected: - IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in rdma-core, only hfi1, ipath and rxe calls it. - IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only ipath and hfi1 calls it. - IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in rdma-core, only ipath and hfi1 call them. - IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in rdma-core, only ipath and hfi1 calls it. - IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere - IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call it. Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Move more uverbs_cmd_mask settings to the coreJason Gunthorpe
These functions all depend on the driver providing a specific op: - REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op - ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this without providing the op - OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow. - OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd() - CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq() - QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but sometimes supplies a NULL op. - RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op - ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an (now deleted) implementation but no userspace All drivers were checked that no drivers provide the op without also setting uverbs_cmd_mask so this should have no functional change. Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove elements in uverbs_cmd_mask that all drivers setJason Gunthorpe
This is a step toward eliminating uverbs_cmd_mask. Preset this list in the core code. Only the op reg_user_mr wasn't already being required from the drivers. Link: https://lore.kernel.org/r/3-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove uverbs_ex_cmd_mask values that are linked to functionsJason Gunthorpe
Since a while now the uverbs layer checks if the driver implements a function before allowing the ucmd to proceed. This largely obsoletes the cmd_mask stuff, but there is some tricky bits in drivers preventing it from being removed. Remove the easy elements of uverbs_ex_cmd_mask by pre-setting them in the core code. These are triggered soley based on the related ops function pointer. query_device_ex is not triggered based on an op, but all drivers already implement something compatible with the extension, so enable it globally too. Link: https://lore.kernel.org/r/2-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16RDMA: Explicitly pass in the dma_device to ib_register_deviceJason Gunthorpe
The code in setup_dma_device has become rather convoluted, move all of this to the drivers. Drives now pass in a DMA capable struct device which will be used to setup DMA, or drivers must fully configure the ibdev for DMA and pass in NULL. Other than setting the masks in rvt all drivers were doing this already anyhow. mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for DMA based on their hardweare limits in: __mthca_init_one() dma_set_max_seg_size (1G) __mlx4_init_one() dma_set_max_seg_size (1G) mlx5_pci_init() set_dma_caps() dma_set_max_seg_size (2G) Other non software drivers (except usnic) were extended to UINT_MAX [1, 2] instead of 2G as was before. [1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ [2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-24RDMA/hns: Add support for SCCC in size of 64 BytesYangyang Li
For HIP09, size of SCCC (Soft Congestion Control Context) is increased to 64 Bytes from 32 Bytes. The hardware will get the configuration of SCCC from driver instead of using a fixed value. Link: https://lore.kernel.org/r/1600245806-56321-5-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-24RDMA/hns: Add support for QPC in size of 512 BytesWenpeng Liang
The new version of RoCEE supports using QPC in size of 256B or 512B, so that HIP09 can supports new congestion control algorithms by using QPC in larger size. Link: https://lore.kernel.org/r/1600245806-56321-4-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-24RDMA/hns: Add support for CQE in size of 64 BytesWenpeng Liang
The new version of RoCEE supports using CQE in size of 32B or 64B. The performance of bus can be improved by using larger size of CQE. Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-17RDMA: Clean MW allocation and free flowsLeon Romanovsky
Move allocation and destruction of memory windows under ib_core responsibility and clean drivers to ensure that no updates to MW ib_core structures are done in driver layer. Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA/hns: Avoid unncessary initializationLijun Ou
Some variables have been initialized when used. As a result, here removes some unncessary initial assignment. Link: https://lore.kernel.org/r/1599547944-30671-1-git-send-email-oulijun@huawei.com Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-23RDMA: Add a dedicated CQ resource tracker functionMaor Gottlieb
In order to avoid double multiplexing of the resource when it is a CQ, add a dedicated callback function. Link: https://lore.kernel.org/r/20200623113043.1228482-6-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-05-25RDMA/hns: Remove unused code about assertYangyang Li
The codes related to assert are no longer used and need to be deleted. Link: https://lore.kernel.org/r/1589982799-28728-5-git-send-email-liweihang@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-06RDMA/hns: Remove unused MTT functionsXi Wang
The MTT (Memory Translate Table) interface is no longer used to configure the buffer address to BT (Base Address Table) that requires driver mapping. Because the MTT is not compatible with multi-hop addressing of the hip08, it is replaced by MTR (Memory Translate Region) interface, and all the MTT functions should be removed. Link: https://lore.kernel.org/r/1588071823-40200-3-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-15RDMA/hns: Remove some redundant variables related to capabilitiesWeihang Li
In struct hns_roce_caps, max_srq_sg and max_srqwqes is unused, and max_srqs has the same effect with num_srqs. So remove them from this structrue. Link: https://lore.kernel.org/r/1578738761-3176-2-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-10RDMA/hns: Add support for reporting wc as software modeXi Wang
When hardware is in resetting stage, we may can't poll back all the expected work completions as the hardware won't generate cqe anymore. This patch allows the driver to compose the expected wc instead of the hardware during resetting stage. Once the hardware finished resetting, we can poll cq from hardware again. Link: https://lore.kernel.org/r/1578572412-25756-1-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-07RDMA/hns: Fix coding style issuesLijun Ou
Fix some coding style issuses without changing logic of codes, most of the modification is unreasonable line breaks and alignments. Link: https://lore.kernel.org/r/1578313276-29080-8-git-send-email-liweihang@huawei.com Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-25RDMA/hns: Rename the functions used inside creating cqYixian Liu
Current names of functions are not proper, such as hns_roce_free_cq, actually it means free cqc, thus we rename them. Furthermore, functions used inside one file can be named without the prefix hns_roce_ which will make the functions for verbs symbols more eye-catching. Link: https://lore.kernel.org/r/1574044493-46984-4-git-send-email-liweihang@hisilicon.com Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-08RDMA/hns: Modify appropriate printingsWenpeng Liang
Modify some printings that is not in uniformed style, non-standard or with spelling errors. Link: https://lore.kernel.org/r/1572952082-6681-10-git-send-email-liweihang@hisilicon.com Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06RDMA/hns: Remove unsupported modify_port callbackKamal Heib
There is no need to return always zero for function which is not supported. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20191028155931.1114-3-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06RDMA: Connect between the mmap entry and the umap_priv structureMichal Kalderon
The rdma_user_mmap_io interface created a common interface for drivers to correctly map hw resources and zap them once the ucontext is destroyed enabling the drivers to safely free the hw resources. However, this meant the drivers need to delay freeing the resource to the ucontext destroy phase to ensure they were no longer mapped. The new mechanism for a common way of handling user/driver address mapping enabled notifying the driver if all umap_priv mappings were removed, and enabled freeing the hw resources when they are done with and not delay it until ucontext destroy. Since not all drivers use the mechanism, NULL can be sent to the rdma_user_mmap_io interface to continue working as before. Drivers that use the mmap_xa interface can pass the entry being mapped to the rdma_user_mmap_io function to be linked together. Link: https://lore.kernel.org/r/20191030094417.16866-4-michal.kalderon@marvell.com Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16RDMA/hns: Optimize cmd init and mode selection for hip08Yixian Liu
There are two modes for mailbox command (cmd) queue, i.e., event mode and poll mode. For each mode, we use corresponding semaphores to protect the cmd queue resource competition, so called event_sem and poll_sem. During cmd init, both semaphores are initialized and poll mode is selected. Thus, there is no need to up poll_sema again in cmd_use_polling. Furthermore, there is no need to down the sema of the other side while switching mode. This patch aims to decouple the switch between event mode and poll mode of cmd. Link: https://lore.kernel.org/r/1567068102-56919-2-git-send-email-liweihang@hisilicon.com Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-12RDMA: Introduce ib_port_phys_state enumKamal Heib
In order to improve readability, add ib_port_phys_state enum to replace the use of magic numbers. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Andrew Boyer <aboyer@tobark.org> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-07RDMA/hns: Clean up unnecessary variable initializationLang Cheng
Here Clean up unnecessary initial value for some variable. Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25RDMA/hns: Cleanup unnecessary exported symbolsLijun Ou
This patch removes the hns-roce.ko for cleanup all the exported symbols in common part. Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-18RDMA: Report available cdevs through RDMA_NLDEV_CMD_GET_CHARDEVJason Gunthorpe
Update the struct ib_client for all modules exporting cdevs related to the ibdevice to also implement RDMA_NLDEV_CMD_GET_CHARDEV. All cdevs are now autoloadable and discoverable by userspace over netlink instead of relying on sysfs. uverbs also exposes the DRIVER_ID for drivers that are able to support driver id binding in rdma-core. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move uverbs_abi_ver into struct ib_device_opsJason Gunthorpe
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-27RDMA/hns: Replace magic numbers with #definesLijun Ou
This patch makes the code more readable by removing magic numbers. Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-27RDMA/hns: Move spin_lock_irqsave to the correct placeLang Cheng
When hip08 set gid, it will call spin_unlock_bh when send cmq. if main.ko call spin_lock_irqsave firstly, and the kernel is before commit f71b74bca637 ("irq/softirqs: Use lockdep to assert IRQs are disabled/enabled"), it will cause WARN_ON_ONCE because of calling spin_unlock_bh in disable context. In fact, the spin_lock_irqsave in main.ko is only used for hip06, and should be placed in hns_roce_hw_v1.c. hns_roce_hw_v2.c uses its own spin_unlock_bh and does not need main.ko manage spin_lock. Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>