summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1
AgeCommit message (Collapse)Author
2017-06-01RDMA/qib,hfi1: Fix MR reference count leak on write with immediateMike Marciniszyn
The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory reference when a buffer cannot be allocated for returning the immediate data. The issue is that the rkey validation has already occurred and the RNR nak fails to release the reference that was fruitlessly gotten. The the peer will send the identical single packet request when its RNR timer pops. The fix is to release the held reference prior to the rnr nak exit. This is the only sequence the requires both rkey validation and the buffer allocation on the same packet. Cc: Stable <stable@vger.kernel.org> # 4.7+ Tested-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/hfi1: Defer setting VL15 credits to link-up interruptByczkowski, Jakub
Keep VL15 credits at 0 during LNI, before link-up. Store VL15 credits value during verify cap interrupt and set in after link-up. This addresses an issue where VL15 MAD packets could be sent by one side of the link before the other side is ready to receive them. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/hfi1: change PCI bar addr assignments to Linux API functionsSteven L. Roberts
The Omni-Path adapter driver fails to load on the ppc64le platform due to invalid PCI setup. This patch makes the PCI configuration more robust and will fix 64 bit addressing for ppc64le. Signed-off-by: Steven L Roberts <robers97@gmail.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-01RDMA/hfi1: fix array termination by appending NULL to attr arraySteven L. Roberts
This fixes a kernel panic when loading the hfi driver as a dynamic module. Signed-off-by: Steven L Roberts <robers97@gmail.com> Reviewed-by: Leon Romanovsky <leon@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-08Merge tags 'for-linus' and 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "As mentioned in my first pull request, this is the subsequent pull requests I had. This is all I have, and in fact this cleans out the RDMA subsystem's entire patchworks queue of kernel changes that are ready to go (well, it did for the weekend anyway, a few new patches are in, but they'll be coming during the -rc cycle). The first tag contains a single patch that would have conflicted if taken from my tree or DaveM's tree as it needed our trees merged to come cleanly. The second tag contains the patch series from Intel plus three other stragllers that came in late last week. I took them because it allowed me to legitimately claim that the RDMA patchworks queue was, for a short time, 100% cleared of all waiting kernel patches, woohoo! :-). I have it under my for-next tag, so it did get 0day and linux- next over the end of last week, and linux-next did show one minor conflict. Summary: 'for-linus' tag: - mlx5/IPoIB fixup patch 'for-next' tag: - the hfi1 15 patch set that landed late - IPoIB get_link_ksettings which landed late because I asked for a respin - one late rxe change - one -rc worthy fix that's in early" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx5: Enable IPoIB acceleration * tag 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: rxe: expose num_possible_cpus() cnum_comp_vectors IB/rxe: Update caller's CRC for RXE_MEM_TYPE_DMA memory type IB/hfi1: Clean up on context initialization failure IB/hfi1: Fix an assign/ordering issue with shared context IDs IB/hfi1: Clean up context initialization IB/hfi1: Correctly clear the pkey IB/hfi1: Search shared contexts on the opened device, not all devices IB/hfi1: Remove atomic operations for SDMA_REQ_HAVE_AHG bit IB/hfi1: Use filedata rather than filepointer IB/hfi1: Name function prototype parameters IB/hfi1: Fix a subcontext memory leak IB/hfi1: Return an error on memory allocation failure IB/hfi1: Adjust default eager_buffer_size to 8MB IB/hfi1: Get rid of divide when setting the tx request header IB/hfi1: Fix yield logic in send engine IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache line IB/hfi1: Fix checks for Offline transient state IB/ipoib: add get_link_ksettings in ethtool
2017-05-08Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-05-04Merge tag 'char-misc-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of new char/misc driver drivers and features for 4.12-rc1. There's lots of new drivers added this time around, new firmware drivers from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and a bunch of other driver updates. Nothing major, except if you happen to have the hardware for these drivers, and then you will be happy :) All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) firmware: google memconsole: Fix return value check in platform_memconsole_init() firmware: Google VPD: Fix return value check in vpd_platform_init() goldfish_pipe: fix build warning about using too much stack. goldfish_pipe: An implementation of more parallel pipe fpga fr br: update supported version numbers fpga: region: release FPGA region reference in error path fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe() mei: drop the TODO from samples firmware: Google VPD sysfs driver firmware: Google VPD: import lib_vpd source files misc: lkdtm: Add volatile to intentional NULL pointer reference eeprom: idt_89hpesx: Add OF device ID table misc: ds1682: Add OF device ID table misc: tsl2550: Add OF device ID table w1: Remove unneeded use of assert() and remove w1_log.h w1: Use kernel common min() implementation uio_mf624: Align memory regions to page size and set correct offsets uio_mf624: Refactor memory info initialization uio: Allow handling of non page-aligned memory regions hangcheck-timer: Fix typo in comment ...
2017-05-04IB/hfi1: Clean up on context initialization failureMichael J. Ruhl
The error path for context initialization is not consistent. Cleanup all resources on failure. Removed unused variable user_event_mask. Add the _BASE_FAILED bit to the event flags so that a base context can notify waiting sub contexts that they cannot continue. Running out of sub contexts is an EBUSY result, not EINVAL. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Fix an assign/ordering issue with shared context IDsMichael J. Ruhl
The current algorithm for generating sub-context IDs is FILO. If the contexts are not closed in that order, the uniqueness of the ID will be compromised. I.e. logging the creation/deletion of context IDs with an application that assigns and closes in a FIFO order reveals: cache_id: assign: uctxt: 3 sub_ctxt: 0 cache_id: assign: uctxt: 3 sub_ctxt: 1 cache_id: assign: uctxt: 3 sub_ctxt: 2 cache_id: close: uctxt: 3 sub_ctxt: 0 cache_id: assign: uctxt: 3 sub_ctxt: 2 <<< The sub_ctxt ID 2 is reused incorrectly. Update the sub-context ID assign algorithm to use a bitmask of in_use contexts. The new algorithm will allow the contexts to be closed in any order, and will only re-use unused contexts. Size subctxt and subctxt_cnt to match the user API size. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Clean up context initializationMichael J. Ruhl
Context initialization mixes base context init with sub context init. This is bad because contexts can be reused, and on reuse, reinit things that should not re-initialized. Normalize comments and function names to refer to base context and sub context (not main, shared or slaves). Separate the base context initialization from sub context initialization. hfi1_init_ctxt() cannot return an error so changed to a void and remove error message. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Correctly clear the pkeyMichael J. Ruhl
In the close path the context is removed from the device array, and then the clear pkey function is called. The pkey function trys to get the context from the device array, but because it was removed the clearing does not occur. Rework pkey clear function to work as expected. Update the function variable to reflect the correct size and name of the hw_context. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Search shared contexts on the opened device, not all devicesMichael J. Ruhl
The search for available shared contexts walks each registered hfi1 device. This search is too broad because other devices may not be on the same fabric, and using its contexts could cause unexpected behavior. Removed walking the list of devices, limiting the search to the opened device. With the device walk removed, the hfi1_devdata (dd) is not available. Added it to the hfi1_filedata for reference. With this change, hfi1_count_units() was rendered obsolete and was removed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Remove atomic operations for SDMA_REQ_HAVE_AHG bitSebastian Sanchez
The AHG index is only accessed in the request call from user space, so there's no need for atomic semantics. Replace atomic operations for SDMA_REQ_HAVE_AHG bit with a test of the AHG index. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Use filedata rather than filepointerMichael J. Ruhl
Since almost all functions that use the hfi1_filedata get the pointer from the file pointer, simplify by only passing the hfi1_filedata pointer. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Name function prototype parametersMichael J. Ruhl
To improve the readability of function prototypes, give the parameters names. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Fix a subcontext memory leakMichael J. Ruhl
The only context that frees user_exp_rcv data structures is the last context closed (from a sub-context set). This leaks the allocations from the other sub-contexts. Separate the common frees from the specific frees and call them at the appropriate time. Using KEDR to check for memory leaks we get: Before test: [leak_check] Possible leaks: 25 After test: [leak_check] Possible leaks: 31 (6 leaked data structures) After patch applied (before and after test have the same value) [leak_check] Possible leaks: 25 Each leak is 192 + 13440 + 6720 = 20352 bytes per sub-context. Cc: stable@vger.kernel.org Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Return an error on memory allocation failureMichael J. Ruhl
If the eager buffer allocation fails, it is necessary to return an error code. Cc: stable@vger.kernel.org Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Adjust default eager_buffer_size to 8MBTymoteusz Kielan
Performance analysis shows benefits for PSM2 in increasing eager buffer size from 2MB to 8MB. The change has neutral impact on verbs. Make change to the module parameter's default value. Allocation ring down was verified to work with the larger buffer size. Reviewed-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Get rid of divide when setting the tx request headerSebastian Sanchez
Div instructions show costly in profiles when the tx request header is set. Using right shift instead of a divide operation reduces the cycles spent in the function that sets the tx request header as shown in the profile. Use right shift operation instead. Profile before change: 43.24% 009 | |--23.41%-- user_sdma_send_pkts | | | |--99.90%-- hfi1_user_sdma_process_requestAfter: Profile after change: 45.75% 009 | |--14.81%-- user_sdma_send_pkts | | | |--99.95%-- hfi1_user_sdma_process_request Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Fix yield logic in send engineMike Marciniszyn
When there are many RC QPs and an RDMA READ request is sent, timeouts occur on the requester side because of fairness among RC QPs on their relative SDMA engine on the responder side. This also hits write and send, but to a lesser extent. Complicating the issue is that the current code checks if workqueue is congested before scheduling other QPs, however, this check is based on the number of active entries in the workqueue, which was found to be too big to for workqueue_congested() to be effective. Fix by reducing the number of active entries as revealed by experimentation from the default of num_sdma to HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES. Retry counts were monitored to determine the correct value. Tracing to investigate any future issues is also added. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache lineMike Marciniszyn
This field is causing excessive cache line bouncing. There are spare bytes in the r_lock cache line so the best approach is to make an rvt QP field and remove from the hfi1 priv field. Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Fix checks for Offline transient stateJakub Byczkowski
In goto_offline() function pstate is masked by 0xff when compared to PLS_OFFLINE state. Mask should be 0xf0, since upper 4 bits specify the "major" state. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Define 'ib' and 'roce' rdma_ah_attr typesDasaratharaman Chandramouli
rdma_ah_attr can now be either ib or roce allowing core components to use one type or the other and also to define attributes unique to a specific type. struct ib_ah is also initialized with the type when its first created. This ensures that calls such as modify_ah dont modify the type of the address handle attribute. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Use rdma_ah_attr accessor functionsDasaratharaman Chandramouli
Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Rename ib_create_ah to rdma_create_ahDasaratharaman Chandramouli
Rename ib_create_ah to rdma_create_ah so its in sync with the rename of the ib address handle attribute Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Rename struct ib_ah_attr to rdma_ah_attrDasaratharaman Chandramouli
This patch simply renames struct ib_ah_attr to rdma_ah_attr as these fields specify attributes that are not necessarily specific to IB. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/core: Move opa_class_port_info definition to header fileDasaratharaman Chandramouli
Both opa_vnic and the hfi driver use the same opa_classport_info definition. We will also have ib_sa capable of querying opa class port info and would need this definition. Move it to ib_mad.h for everyone to use. Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Use bool in process_ecnDennis Dalessandro
The process_ecn intends to return a bool value. However it is doing so incorrectly by ANDing the fecn mask. The fecn bit is bit 31. Bool is not a native data type and is up to the compiler to implement how it sees fit. It is conceivable that this upper bit gets washed out. Fix by converting to a bool properly. Cc: stable@vger.kernel.org Fixes: Commit fd2b562edca6 ("IB/hfi1: Pull FECN/BECN processing to a common place") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi: Protect against writable mmapIra Weiny
The device/port status is not intended to be changed from user space. Prevent a user from mapping them as write or execute. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Fix unbalanced braces around elseDennis Dalessandro
Add missing braces around else blocks in a few places to make checkpatch happy. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Convert %Lx to %llxDennis Dalessandro
According to checkpatch %Lx is not standard C so remove it and use the suggested %llx. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Fix misspelling in commentDennis Dalessandro
Checkpatch flagged a misspelled word. Fix it. Fixes: 8764522e5251 ("staging/rdma/hfi1: Unexpected link up pkey values are not an error") Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Permanently enable P_Key checking in HFINeel Desai
Ingress and egress port P_Key checking should always be performed for HFIs. This patch will enable ingress and egress P_Key checking when the port is initialized and will ignore the P_Key information sent by the FM in the port info structure which is meant to be used only by the switch. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Neel Desai <neel.desai@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Cache neighbor secure data after link upStuart Summers
Secure data is transferred across the link during verify cap. This includes Neighbor Guid, Type, and Port Number. This transfer is not guaranteed to complete until the 8051 firmware has completed processing of the state_complete frame. Move the consumption of this data from verify cap handling to link up handling to ensure the data is finalized. Additionally, do not notify the SM that the link is up until after this data is actually available. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Stuart Summers <john.s.summers@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Adjust high temperature warning for QSFP cableNeel Desai
When we receive a QSFP_HIGH_TEMP_ALARM or QSFP_HIGH_TEMP_WARNING interrupt, print a "QSFP cable temperature too high" message. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Neel Desai <neel.desai@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Fix softlockup issueTadeusz Struk
Soft lockups can occur because the mad processing on different CPUs acquire the spin lock dc8051_lock: [534552.835870] [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1] [534552.835880] [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1] [534552.835893] [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1] [534552.835904] [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1] [534552.835908] [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0 [534552.835936] [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core] [534552.835939] [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240 [534552.835947] [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core] [534552.835955] [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core] [534552.835962] [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core] [534552.835964] [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [534552.835966] [<ffffffff810a8d76>] worker_thread+0x126/0x410 [534552.835969] [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [534552.835971] [<ffffffff810b052f>] kthread+0xcf/0xe0 [534552.835974] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [534552.835977] [<ffffffff81696418>] ret_from_fork+0x58/0x90 [534552.835980] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 This issue is made worse when the 8051 is busy and the reads take longer. Fix by using a non-spinning lock procure. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Prevent kernel QP post send hard lockupsMike Marciniszyn
The driver progress routines can call cond_resched() when a timeslice is exhausted and irqs are enabled. If the ULP had been holding a spin lock without disabling irqs and the post send directly called the progress routine, the cond_resched() could yield allowing another thread from the same ULP to deadlock on that same lock. Correct by replacing the current hfi1_do_send() calldown with a unique one for post send and adding an argument to hfi1_do_send() to indicate that the send engine is running in a thread. If the routine is not running in a thread, avoid calling cond_resched(). CC: <stable@vger.kernel.org> # 4.7.x- Fixes: Commit 831464ce4b74 ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Use defines from common headersDon Hiatt
Move FECN and BECN related defines to common header files Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Add functions to parse 9B headersDon Hiatt
These inline functions improve code readability by enabling callers to read specific fields from the header without knowledge of byte offsets. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Rename hdr2sc to hfi1_9B_get_sc5Dasaratharaman Chandramouli
The function really returned the 5-bit sc value from the header and rhf. hdr2sc didn't quite describe what it did. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Return SC2VL mappings to FM with VL15 instead of ILLEGAL_VLSebastian Sanchez
VL15 in the SC2VL table is used to indicate an invalid SC for the FM, however, internally the driver remaps SCs from VL15 to ILLEGAL_VL to prevent error counts. This mapping confuses the FM when performing a sweep, making it return a table mismatch error. Have SMA convert ILLEGAL_VL to VL15 entries for the SC2VL table queries. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Validate the TID count before using itMichael J. Ruhl
Improve the safety of the code by validating the user supplied tidcnt before use. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/rdmavt/hfi1/qib: Use the MGID and MLID for multicast addressingMichael J. Ruhl
The Infiniband spec defines "A multicast address is defined by a MGID and a MLID" (section 10.5). The current code only uses the MGID for identifying multicast groups. Update the driver to be compliant with this definition. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28IB/hfi1: Correct MulticastMask/CollectiveMask info to SMA outputMichael J. Ruhl
The FM uses the values of MulticastMask and CollectiveMask to determine the number of bits for net masks. The current values of 0 and 0 are incorrect. The values should be 4 and 1. Updated the necessary code to reflect the specified values. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-25IB/hfi1: Use pcie_flr() instead of duplicating itChristoph Hellwig
Tested-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Doug Ledford <dledford@redhat.com>
2017-04-25IB/hfi: Fix up comments in engine mappingIra Weiny
Fix off by 1 error in comments documenting the sdma and send context mappings. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-20IB/hfi1: Coding style improvement (make sizeof use safer)Markus Elfring
Replace the specification of a data structure by a reference to the desired member as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-20IB/hfi1: Remove intermediate var in hfi1_user_sdma_alloc_queues()Markus Elfring
* Pass a product for a call of the function "vmalloc_user" without storing it in an intermediate variable. * Delete the local variable "memsize" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-20IB/hfi1: Use kcalloc() in hfi1_user_sdma_alloc_queues()Markus Elfring
* Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus reuse the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-20IB/hfi1: Use kcalloc() in hfi1_user_exp_rcv_init()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus reuse the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 20:18:12 +0000