summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1
AgeCommit message (Collapse)Author
2018-09-20IB/hfi1: Fix SL array bounds checkIra Weiny
The SL specified by a user needs to be a valid SL. Add a range check to the user specified SL value which protects from running off the end of the SL to SC table. CC: stable@vger.kernel.org Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11IB/hfi1,PCI: Allow bus reset while probingDennis Dalessandro
Calling into the new API to reset the secondary bus results in a deadlock. This occurs because the device/bus is already locked at probe time. Reverting back to the old behavior while the API is improved. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200985 Fixes: c6a44ba950d1 ("PCI: Rename pci_try_reset_bus() to pci_reset_bus()") Fixes: 409888e0966e ("IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset") Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Cc: Sinan Kaya <okaya@codeaurora.org>
2018-09-11IB/hfi1: set_intr_bits uses incorrect source for register modificationMichael J. Ruhl
HFI IRQ enable bits are not being set correctly. Send context error and DC IRQs are not being enabled correctly. In addition, send context error IRQs are not being delivered. Because of this, send context errors are not being handled correctly when they occur. When setting the IRQ bits, if an IRQ range is used, and the last bit is on a register boundary (bit 63), the calculated index for the final register modification is incorrect (index + 1 vs. index). The incorrect index calculation causes incorrect IRQ bits to be set. In this case the send context error IRQ is NOT enabled. Fix by using the 'last' value rather than the counted 'src' value to determine the final index to use. This satisfies all cases. Fixes: a2f7bbdc2dba ("IB/hfi1: Rework the IRQ API to be more flexible") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11IB/hfi1: Missing return value in error path for user sdmaMichael J. Ruhl
If the set_txreq_header_agh() function returns an error, the exit path is chosen. In this path, the code fails to set the return value. This will cause the caller to not realize an error has occurred. Set the return value correctly in the error path. Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11IB/hfi1: Right size user_sdma sequence numbers and related variablesMichael J. Ruhl
Hardware limits the maximum number of packets to u16 packets. Match that size for all relevant sequence numbers in the user_sdma engine. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11IB/hfi1: Remove race conditions in user_sdma send pathMichael J. Ruhl
Packet queue state is over used to determine SDMA descriptor availablitity and packet queue request state. cpu 0 ret = user_sdma_send_pkts(req, pcount); cpu 0 if (atomic_read(&pq->n_reqs)) cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE) cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE); At this point pq->n_reqs == 0 and pq->state is incorrectly SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state to return to _INACTIVE. This can also change the state from _DEFERRED to _ACTIVE. However, this is a mostly benign race. Remove the racy code path. Use n_reqs to determine if a packet queue is active or not. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11IB/hfi1: Eliminate races in the SDMA send error pathMichael J. Ruhl
pq_update() can only be called in two places: from the completion function when the complete (npkts) sequence of packets has been submitted and processed, or from setup function if a subset of the packets were submitted (i.e. the error path). Currently both paths can call pq_update() if an error occurrs. This race will cause the n_req value to go negative, hanging file_close(), or cause a crash by freeing the txlist more than once. Several variables are used to determine SDMA send state. Most of these are unnecessary, and have code inspectible races between the setup function and the completion function, in both the send path and the error path. The request 'status' value can be set by the setup or by the completion function. This is code inspectibly racy. Since the status is not needed in the completion code or by the caller it has been removed. The request 'done' value races between usage by the setup and the completion function. The completion function does not need this. When the number of processed packets matches npkts, it is done. The 'has_error' value races between usage of the setup and the completion function. This can cause incorrect error handling and leave the n_req in an incorrect value (i.e. negative). Simplify the code by removing all of the unneeded state checks and variables. Clean up iovs node when it is freed. Eliminate race conditions in the error path: If all packets are submitted, the completion handler will set the completion status correctly (ok or aborted). If all packets are not submitted, the caller must wait until the submitted packets have completed, and then set the completion status. These two change eliminate the race condition in the error path. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11IB/{hfi1, qib, rdmavt}: Schedule multi RC/UC packets instead of postingMichael J. Ruhl
The post_send() path determines if it should post directly or, schedule the post for later. The current logic is: if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold post the send else schedule This can allow large requests to call the send engine directly. Large requests can potentially produce a large number of packets prior to returning to the caller, blocking the caller from posting more requests, and allowing better parallel processing. Allow the driver(s) more say in this logic (pass call_send to the driver, rather than examining a return value). Update hfi1/qib logic to schedule the send engine if an RC or UC message is larger than the QP MTU size. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-01IB/hfi1: Move URGENT IRQ enable to hfi1_rcvctrl()Michael J. Ruhl
User contexts use the receive URGENT interrupt. However, enabling the IRQ SRC in the file_ops module is not as clean as it could be. Augment the _rcvctl() function to be able to enable/disable the IRQ source. Use the new interface from file_ops to enable/disable the IRQ. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Rework the IRQ API to be more flexibleMichael J. Ruhl
The current IRQ API is an all or nothing interface. This has two problems: 1. All IRQs are enabled regardless of use 2. Moving from general interrupt to MSIx handling is difficult Introduce a new API to enable/disable specific IRQs or a range of IRQs. Do not enable and disable all IRQs in one step. Rework various modules to enable/disable IRQs when needed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: PCIe bus width retryKamenee Arumugam
Retry the PCIe link training up to 'pcie_retry' times if the PCIe link width is narrower than the previous width. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Make the MSIx resource allocation a bit more flexibleMichael J. Ruhl
The current method of allocating MSIx resources is a bit cumbersome, and not very easily added to. Refactor and re-order the code paths into a more consistent interface. Update the interface so that allocations are not order dependent. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Prepare for new HFI1 MSIx APIMichael J. Ruhl
The current HFI1 MSIx API is difficult to follow, change, or add to. In anticipation of moving to an more flexible API, move the current MSIx functionality to the new msix.c module. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Get the hfi1_devdata structure as early as possibleMichael J. Ruhl
Currently several things occur before the hfi1_devdata structure is allocated. This leads to an inconsistent logging ability and makes it more difficult to restructure some code paths. Allocate (and do a minimal init) the structure as soon as possible. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: tune_pcie_caps is arbitrarily placed, poorlyMichael J. Ruhl
The tune_pcie_caps needs to occur sometime after PCI is enabled, but before the HFI is enabled. Currently it is placed in the MSIx allocation code which doesn't really fit. Moving it to just after the gen3 bump. Clean up the associated code (modules, etc.). Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Remove duplicated definesMichael J. Ruhl
TXREQ defines are duplicated, incompletely, in the sdma header file. Remove duplicate defines. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Rework file list in MakefileDennis Dalessandro
We want to keep files in alphabetical order in our makefile, however this just makes for messy diffs when adding (or removing) files. Let's just clean this up and make it line by line. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull more rdma updates from Jason Gunthorpe: "This is the SMC cleanup promised, a randconfig regression fix, and kernel oops fix. Summary: - Switch SMC over to rdma_get_gid_attr and remove the compat - Fix a crash in HFI1 with some BIOS's - Fix a randconfig failure" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/ucm: fix UCM link error IB/hfi1: Invalid NUMA node information can cause a divide by zero RDMA/smc: Replace ib_query_gid with rdma_get_gid_attr
2018-08-22mm, oom: distinguish blockable mode for mmu notifiersMichal Hocko
There are several blockable mmu notifiers which might sleep in mmu_notifier_invalidate_range_start and that is a problem for the oom_reaper because it needs to guarantee a forward progress so it cannot depend on any sleepable locks. Currently we simply back off and mark an oom victim with blockable mmu notifiers as done after a short sleep. That can result in selecting a new oom victim prematurely because the previous one still hasn't torn its memory down yet. We can do much better though. Even if mmu notifiers use sleepable locks there is no reason to automatically assume those locks are held. Moreover majority of notifiers only care about a portion of the address space and there is absolutely zero reason to fail when we are unmapping an unrelated range. Many notifiers do really block and wait for HW which is harder to handle and we have to bail out though. This patch handles the low hanging fruit. __mmu_notifier_invalidate_range_start gets a blockable flag and callbacks are not allowed to sleep if the flag is set to false. This is achieved by using trylock instead of the sleepable lock for most callbacks and continue as long as we do not block down the call chain. I think we can improve that even further because there is a common pattern to do a range lookup first and then do something about that. The first part can be done without a sleeping lock in most cases AFAICS. The oom_reaper end then simply retries if there is at least one notifier which couldn't make any progress in !blockable mode. A retry loop is already implemented to wait for the mmap_sem and this is basically the same thing. The simplest way for driver developers to test this code path is to wrap userspace code which uses these notifiers into a memcg and set the hard limit to hit the oom. This can be done e.g. after the test faults in all the mmu notifier managed memory and set the hard limit to something really small. Then we are looking for a proper process tear down. [akpm@linux-foundation.org: coding style fixes] [akpm@linux-foundation.org: minor code simplification] Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Christian König <christian.koenig@amd.com> # AMD notifiers Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx and umem_odp Reported-by: David Rientjes <rientjes@google.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-20IB/hfi1: Invalid NUMA node information can cause a divide by zeroMichael J. Ruhl
If the system BIOS does not supply NUMA node information to the PCI devices, the NUMA node is selected by choosing the current node. This can lead to the following crash: divide error: 0000 SMP CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G IOE ------------ 3.10.0-693.21.1.el7.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.01.01.0005.101720141054 10/17/2014 Workqueue: events work_for_cpu_fn task: ffff880174480fd0 ti: ffff880174488000 task.ti: ffff880174488000 RIP: 0010: [<ffffffffc020ac69>] hfi1_dev_affinity_init+0x129/0x6a0 [hfi1] RSP: 0018:ffff88017448bbf8 EFLAGS: 00010246 RAX: 0000000000000011 RBX: ffff88107ffba6c0 RCX: ffff88085c22e130 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880824ad0000 RBP: ffff88017448bc48 R08: 0000000000000011 R09: 0000000000000002 R10: ffff8808582b6ca0 R11: 0000000000003151 R12: ffff8808582b6ca0 R13: ffff8808582b6518 R14: ffff8808582b6010 R15: 0000000000000012 FS: 0000000000000000(0000) GS:ffff88085ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc707404f0 CR3: 0000000001a02000 CR4: 00000000001607f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: hfi1_init_dd+0x14b3/0x27a0 [hfi1] ? pcie_capability_write_word+0x46/0x70 ? hfi1_pcie_init+0xc0/0x200 [hfi1] do_init_one+0x153/0x4c0 [hfi1] ? sched_clock_cpu+0x85/0xc0 init_one+0x1b5/0x260 [hfi1] local_pci_probe+0x4a/0xb0 work_for_cpu_fn+0x1a/0x30 process_one_work+0x17f/0x440 worker_thread+0x278/0x3c0 ? manage_workers.isra.24+0x2a0/0x2a0 kthread+0xd1/0xe0 ? insert_kthread_work+0x40/0x40 ret_from_fork+0x77/0xb0 ? insert_kthread_work+0x40/0x40 If the BIOS is not supplying NUMA information: - set the default table count to 1 for all possible nodes - select node 0 (instead of current NUMA) node to get consistent performance - generate an error indicating that the BIOS should be upgraded Reviewed-by: Gary Leshner <gary.s.leshner@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-16Merge branch 'linus/master' into rdma.git for-nextJason Gunthorpe
rdma.git merge resolution for the 4.19 merge window Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new spelling for atomic_fetch_add_unless drivers/nvme/host/rdma.c - Replace max_sge with max_send_sge in new blk code drivers/nvme/target/rdma.c - Use the blk code and revise to use NULL for ib_post_recv when appropriate - Replace max_sge with max_recv_sge in new blk code net/rds/ib_send.c - Use the net code and revise to use NULL for ib_post_recv when appropriate Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-16Merge tag 'v4.18' into rdma.git for-nextJason Gunthorpe
Resolve merge conflicts from the -rc cycle against the rdma.git tree: Conflicts: drivers/infiniband/core/uverbs_cmd.c - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next - Merge removal of file->ucontext in for-next with new code in -rc drivers/infiniband/core/uverbs_main.c - for-next removed code from ib_uverbs_write() that was modified in for-rc Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-16Merge tag 'pci-v4.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19PCI: Rename pci_try_reset_bus() to pci_reset_bus()Sinan Kaya
Now that the old implementation of pci_reset_bus() is gone, replace pci_try_reset_bus() with pci_reset_bus(). Compared to the old implementation, new code will fail immmediately with -EAGAIN if object lock cannot be obtained. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19PCI: Unify try slot and bus reset APISinan Kaya
Drivers are expected to call pci_try_reset_slot() or pci_try_reset_bus() by querying if a system supports hotplug or not. A survey showed that most drivers don't do this and we are leaking hotplug capability to the user. Hide pci_try_slot_reset() from drivers and embed into pci_try_bus_reset(). Change pci_try_reset_bus() parameter from struct pci_bus to struct pci_dev. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus ResetSinan Kaya
Getting ready to hide pci_reset_bridge_secondary_bus() from the drivers. pci_reset_bridge_secondary_bus() should only be used internally by the PCI code itself. Other drivers should rely on higher level pci_try_reset_bus() API. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-11IB/hfi1: Suppress a compiler warningBart Van Assche
Avoid that the following compiler warning is reported when building with gcc 8: drivers/infiniband/hw/hfi1/verbs.c:1896:2: warning: 'strncpy' output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-10RDMA/hfi1: Move grh_required into update_sm_ahJason Gunthorpe
grh_required is intended to be a global setting where all AV's will require a GRH, not just the sm_lid. Move the special logic to the creation of the SM AH. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-07-09net: allow ndo_select_queue to pass netdevAlexander Duyck
This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-07-03IB/hfi1: Remove incorrect call to do_interrupt callbackMichael J. Ruhl
The general interrupt handler is_rcv_avail_int() has two paths, do_interrupt() (callback) and handle_user_interrupt(). The do_interrupt() callback is for the threaded receive handling. is_rcv_avail_int() cannot handle threaded IRQs. If the do_interrupt() path is taken, and the IRQ returns IRQ_WAKE_THREAD, the IRQ behavior will be indeterminate. Remove incorrect call to do_interrupt() from is_rcv_avail_int(), leaving the un-threaded (handle_user_interrupt()) path. Fixes: f4f30031c33c ("staging/rdma/hfi1: Thread the receive interrupt.") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-03IB/hfi1: Set in_use_ctxts bits for user ctxts onlyMichael J. Ruhl
The in_use_ctxts bitmask is for user receive contexts only. Setting it for any other type of receive context is incorrect. Move initial set of in_use_ctxts bits from the general context init to the user context specific init. Having this bit set can allow contexts to be incorrectly identified by some IRQ handlers. This will allow handle_user_interrupt() will now filter user contexts correctly. Clean up redundant is_rcv_urgent_int() user context check. A follow on patch will clean up an incorrect code path in the is_rcv_avail_int(). Fixes: 8737ce95c463 ("IB/hfi1: Fix an assign/ordering issue with shared context IDs") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-26IB/hfi1: Fix incorrect mixing of ERR_PTR and NULL return valuesMichael J. Ruhl
The __get_txreq() function can return a pointer, ERR_PTR(-EBUSY), or NULL. All of the relevant call sites look for IS_ERR, so the NULL return would lead to a NULL pointer exception. Do not use the ERR_PTR mechanism for this function. Update all call sites to handle the return value correctly. Clean up error paths to reflect return value. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> # 4.9.x+ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-22IB/hfi1: Remove INTx support and simplify MSIx usageMichael J. Ruhl
The INTx IRQ support does not work for all HF1 IRQ handlers (specifically the receive data IRQs). Remove all supporting code for the INTx IRQ. If the requested MSIx vector request is unsuccessful, do not allow the driver to continue. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-22IB/hfi1: Reorg ctxtdata and rightsize fieldsMike Marciniszyn
Many fields in ctxtdata are incorrectly sized and the organization of the fields within the structure is a jumble. Fix by: - Correcting oversize fields. - Putting fields common to all contexts at the top with hot fields at the top. - Moving PSM fields to the bottom of the structure. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-22IB/hfi1: Remove caches of chip CSRsMike Marciniszyn
Remove the sizeable cache of the chip sizing CSRs and replace with CSR reads as needed. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-22IB/hfi1: Remove unused/writeonly devdata fieldsMike Marciniszyn
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-22IB/hfi1: Rightsize ctxt_eager_bufs fieldsMike Marciniszyn
Fields in this structure are sized excessively based on hardware limitations and input values. Fix by reducing fields as appropriate and repositioning to close holes in the structure. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-22IB/hfi1: Remove rcvctrl from ctxtdataMike Marciniszyn
It is only ever written. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-22IB/hfi1: Remove rcvhdrq_sizeMike Marciniszyn
The usage of this ctxt data field is not hot path and the value can be computed on demand to cut down the ctxtdata bloat. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/rdmavt, IB/hfi1: Create device dependent s_flagsMike Marciniszyn
Move some s_flags defines out of rdmavt and into hfi1 because they are hfi1 specific and therefore should remain in the driver instead of bubbling up to rdmavt. Document device specific ranges in rdmavt and remap those in hfi1. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/hfi1: Remove rcvhdrsizeMike Marciniszyn
The field is based on a constant that can never change. Use the define to assign the register instead. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/hfi1: Move rhf_offset from devdata to ctxtdataMike Marciniszyn
This field should be in ctxtdata to allow for better locality of access by eliminating a dd dereference. The new field is now side-by-side with rcvhdrqentsize since the rhf_offset is a function of the rcvhdrqentsize. Both fields are now correctly sized as u8. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/hfi1: Move normal functions from hfi1_devdata to const arrayMike Marciniszyn
The current implementation precludes having receive context specific packet type receive handlers. Fix this by adding adding c99 const array for the existing handlers and remove the current 72 bytes of pointers from devdata. A new pointer in hfi1_ctxtdata will point to the const array. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-12treewide: Use array_size() in kvzalloc_node()Kees Cook
The kvzalloc_node() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: kvzalloc_node(a * b, gfp, node) with: kvzalloc_node(array_size(a, b), gfp, node) as well as handling cases of: kvzalloc_node(a * b * c, gfp, node) with: kvzalloc_node(array3_size(a, b, c), gfp, node) This does, however, attempt to ignore constant size factors like: kvzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( kvzalloc_node( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | kvzalloc_node( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | kvzalloc_node( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | kvzalloc_node( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ kvzalloc_node( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc_node(C1 * C2 * C3, ...) | kvzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( kvzalloc_node(C1 * C2, ...) | kvzalloc_node( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This has been a quiet cycle for RDMA, the big bulk is the usual smallish driver updates and bug fixes. About four new uAPI related things. Not as much Szykaller patches this time, the bugs it finds are getting harder to fix. Summary: - More work cleaning up the RDMA CM code - Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns, i40iw, iw_cxgb4, mlx5, rxe - Driver specific resource tracking and reporting via netlink - Continued work for name space support from Parav - MPLS support for the verbs flow steering uAPI - A few tricky IPoIB fixes improving robustness - HFI1 driver support for the '16B' management packet format - Some auditing to not print kernel pointers via %llx or similar - Mark the entire 'UCM' user-space interface as BROKEN with the intent to remove it entirely. The user space side of this was long ago replaced with RDMA-CM and syzkaller is finding bugs in the residual UCM interface nobody wishes to fix because nobody uses it. - Purge more bogus BUG_ON's from Leon - 'flow counters' verbs uAPI - T10 fixups for iser/isert, these are Acked by Martin but going through the RDMA tree due to dependencies" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (138 commits) RDMA/mlx5: Update SPDX tags to show proper license RDMA/restrack: Change SPDX tag to properly reflect license IB/hfi1: Fix comment on default hdr entry size IB/hfi1: Rename exp_lock to exp_mutex IB/hfi1: Add bypass register defines and replace blind constants IB/hfi1: Remove unused variable IB/hfi1: Ensure VL index is within bounds IB/hfi1: Fix user context tail allocation for DMA_RTAIL IB/hns: Use zeroing memory allocator instead of allocator/memset infiniband: fix a possible use-after-free bug iw_cxgb4: add INFINIBAND_ADDR_TRANS dependency IB/isert: use T10-PI check mask definitions from core layer IB/iser: use T10-PI check mask definitions from core layer RDMA/core: introduce check masks for T10-PI offload IB/isert: fix T10-pi check mask setting IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters ...
2018-06-07Merge tag 'pci-v4.18-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-04IB/hfi1: Fix comment on default hdr entry sizeMike Marciniszyn
The comment for the default header queue entry size is incorrect. Correct the comment and fix the resulting S_IRUGO warning that shows up in the widened patch context. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-04IB/hfi1: Rename exp_lock to exp_mutexKaike Wan
The mutex exp_lock in struct hfi1_ctxtdata is used to protect all Expected TID data of a user context. This patch renames it to exp_mutex to better reflect its identity and prepare for upcoming patches. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:18:06 +0000