summaryrefslogtreecommitdiff
path: root/drivers/infiniband/core/device.c
AgeCommit message (Collapse)Author
2020-10-16RDMA: Explicitly pass in the dma_device to ib_register_deviceJason Gunthorpe
The code in setup_dma_device has become rather convoluted, move all of this to the drivers. Drives now pass in a DMA capable struct device which will be used to setup DMA, or drivers must fully configure the ibdev for DMA and pass in NULL. Other than setting the masks in rvt all drivers were doing this already anyhow. mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for DMA based on their hardweare limits in: __mthca_init_one() dma_set_max_seg_size (1G) __mlx4_init_one() dma_set_max_seg_size (1G) mlx5_pci_init() set_dma_caps() dma_set_max_seg_size (2G) Other non software drivers (except usnic) were extended to UINT_MAX [1, 2] instead of 2G as was before. [1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ [2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16Merge branch 'dynamic_sg' into rdma.git for-nextJason Gunthorpe
From Maor Gottlieb says: ==================== This series extends __sg_alloc_table_from_pages to allow chaining of new pages to an already initialized SG table. This allows for drivers to utilize the optimization of merging contiguous pages without a need to pre allocate all the pages and hold them in a very large temporary buffer prior to the call to SG table initialization. The last patch changes the Infiniband core to use the new API. It removes duplicate functionality from the code and benefits from the optimization of allocating dynamic SG table from pages. In huge pages system of 2MB page size, without this change, the SG table would contain x512 SG entries. ==================== * branch 'dynamic_sg': RDMA/umem: Move to allocate SG table from pages lib/scatterlist: Add support in dynamic allocation of SG table from pages tools/testing/scatterlist: Show errors in human readable form tools/testing/scatterlist: Rejuvenate bit-rotten test
2020-09-17RDMA: Convert RWQ table logic to ib_core allocation schemeLeon Romanovsky
Move struct ib_rwq_ind_table allocation to ib_core. Link: https://lore.kernel.org/r/20200902081623.746359-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-17RDMA: Clean MW allocation and free flowsLeon Romanovsky
Move allocation and destruction of memory windows under ib_core responsibility and clean drivers to ensure that no updates to MW ib_core structures are done in driver layer. Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-14RDMA/core: Fix ordering of CQ pool destructionJason Gunthorpe
rxe will hold a refcount on the IB device as long as CQ objects exist, this causes destruction of a rxe device to hang if the CQ pool has any cached CQs since they are being destroyed after the refcount must go to zero. Treat the CQ pool like a client and create/destroy it before/after all other clients. No users of CQ pool can exist past a client remove call. Link: https://lore.kernel.org/r/e8a240aa-9e9b-3dca-062f-9130b787f29b@acm.org Fixes: c7ff819aefea ("RDMA/core: Introduce shared CQ pool API") Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-20RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"Colin Ian King
There is a spelling mistake in a pr_warn message. Fix it. Link: https://lore.kernel.org/r/20200810075824.46770-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "A quiet cycle after the larger 5.8 effort. Substantially cleanup and driver work with a few smaller features this time. - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re - Removal of dead or redundant code across the drivers - RAW resource tracker dumps to include a device specific data blob for device objects to aide device debugging - Further advance the IOCTL interface, remove the ability to turn it off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands - Remove stubs related to devices with no pkey table - A shared CQ scheme to allow multiple ULPs to share the CQ rings of a device to give higher performance - Several more static checker, syzkaller and rare crashers fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits) RDMA/mlx5: Fix flow destination setting for RDMA TX flow table RDMA/rxe: Remove pkey table RDMA/umem: Add a schedule point in ib_umem_get() RDMA/hns: Fix the unneeded process when getting a general type of CQE error RDMA/hns: Fix error during modify qp RTS2RTS RDMA/hns: Delete unnecessary memset when allocating VF resource RDMA/hns: Remove redundant parameters in set_rc_wqe() RDMA/hns: Remove support for HIP08_A RDMA/hns: Refactor hns_roce_v2_set_hem() RDMA/hns: Remove redundant hardware opcode definitions RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP RDMA/include: Replace license text with SPDX tags RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting RDMA/cma: Execute rdma_cm destruction from a handler properly RDMA/cma: Remove unneeded locking for req paths RDMA/cma: Using the standard locking pattern when delivering the removal event RDMA/cma: Simplify DEVICE_REMOVAL for internal_id RDMA/efa: Add EFA 0xefa1 PCI ID RDMA/efa: User/kernel compatibility handshake mechanism ...
2020-07-20RDMA/core: Remove query_pkey from the mandatory opsKamal Heib
The query_pkey() isn't mandatory for the iwarp providers, so remove this requirement from the RDMA core. Link: https://lore.kernel.org/r/20200714183414.61069-4-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-19dma-mapping: make support for dma ops optionalChristoph Hellwig
Avoid the overhead of the dma ops support for tiny builds that only use the direct mapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2020-07-06RDMA: Move XRCD to be under ib_core responsibilityLeon Romanovsky
Update the code to allocate and free ib_xrcd structure in the ib_core instead of inside drivers. Link: https://lore.kernel.org/r/20200630101855.368895-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-06RDMA/core: Create and destroy counters in the ib_coreLeon Romanovsky
Move allocation and destruction of counters under ib_core responsibility Link: https://lore.kernel.org/r/20200630101855.368895-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-06IB/uverbs: Expose UAPI to query ucontextYishai Hadas
Expose UAPI to query ucontext, this will let user space application that didn't allocate the ucontext but has access to by owning the matching command FD to retrieve the ucontext information. Link: https://lore.kernel.org/r/20200630093916.332097-4-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02RDMA/core: Fix bogus WARN_ON during ib_unregister_device_queued()Jason Gunthorpe
ib_unregister_device_queued() can only be used by drivers using the new dealloc_device callback flow, and it has a safety WARN_ON to ensure drivers are using it properly. However, if unregister and register are raced there is a special destruction path that maintains the uniform error handling semantic of 'caller does ib_dealloc_device() on failure'. This requires disabling the dealloc_device callback which triggers the WARN_ON. Instead of using NULL to disable the callback use a special function pointer so the WARN_ON does not trigger. Fixes: d0899892edd0 ("RDMA/device: Provide APIs from the core code to help unregistration") Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com Suggested-by: Hillf Danton <hdanton@sina.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-24RDMA: Add support to dump resource tracker in RAW formatMaor Gottlieb
Add support to get resource dump in raw format. It enable drivers to return the entire device specific QP/CQ/MR context without a need from the driver to set each field separately. The raw query returns only the device specific data, general data is still returned by using the existing queries. Example: $ rdma res show mr dev mlx5_1 mrn 2 -r -j [{"ifindex":7,"ifname":"mlx5_1", "data":[0,4,255,254,0,0,0,0,0,0,0,0,16,28,0,216,...]}] Link: https://lore.kernel.org/r/20200623113043.1228482-9-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-23RDMA: Add dedicated CM_ID resource tracker functionMaor Gottlieb
In order to avoid double multiplexing of the resource when it is a cm id, add a dedicated callback function. In addition remove fill_res_entry which is not used anymore. Link: https://lore.kernel.org/r/20200623113043.1228482-8-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-23RDMA: Add dedicated QP resource tracker functionMaor Gottlieb
In order to avoid double multiplexing of the resource when it is a QP, add a dedicated callback function. Link: https://lore.kernel.org/r/20200623113043.1228482-7-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-23RDMA: Add a dedicated CQ resource tracker functionMaor Gottlieb
In order to avoid double multiplexing of the resource when it is a CQ, add a dedicated callback function. Link: https://lore.kernel.org/r/20200623113043.1228482-6-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-23RDMA: Add dedicated MR resource tracker functionMaor Gottlieb
In order to avoid double multiplexing of the resource when it is a MR, add a dedicated callback function. Link: https://lore.kernel.org/r/20200623113043.1228482-5-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-02RDMA/core: Remove FMR device opsMax Gurtovoy
After removing FMR support from all the RDMA ULPs and providers, there is no need to keep FMR operation for IB devices. Link: https://lore.kernel.org/r/11-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-29RDMA/core: Introduce shared CQ pool APIYamin Friedman
Allow a ULP to ask the core to provide a completion queue based on a least-used search on a per-device CQ pools. The device CQ pools grow in a lazy fashion when more CQs are requested. This feature reduces the amount of interrupts when using many QPs. Using shared CQs allows for more effcient completion handling. It also reduces the amount of overhead needed for CQ contexts. Test setup: Intel(R) Xeon(R) Platinum 8176M CPU @ 2.10GHz servers. Running NVMeoF 4KB read IOs over ConnectX-5EX across Spectrum switch. TX-depth = 32. The patch was applied in the nvme driver on both the target and initiator. Four controllers are accessed from each core. In the current test case we have exposed sixteen NVMe namespaces using four different subsystems (four namespaces per subsystem) from one NVM port. Each controller allocated X queues (RDMA QPs) and attached to Y CQs. Before this series we had X == Y, i.e for four controllers we've created total of 4X QPs and 4X CQs. In the shared case, we've created 4X QPs and only X CQs which means that we have four controllers that share a completion queue per core. Until fourteen cores there is no significant change in performance and the number of interrupts per second is less than a million in the current case. ================================================== |Cores|Current KIOPs |Shared KIOPs |improvement| |-----|---------------|--------------|-----------| |14 |2332 |2723 |16.7% | |-----|---------------|--------------|-----------| |20 |2086 |2712 |30% | |-----|---------------|--------------|-----------| |28 |1971 |2669 |35.4% | |================================================= |Cores|Current avg lat|Shared avg lat|improvement| |-----|---------------|--------------|-----------| |14 |767us |657us |14.3% | |-----|---------------|--------------|-----------| |20 |1225us |943us |23% | |-----|---------------|--------------|-----------| |28 |1816us |1341us |26.1% | ======================================================== |Cores|Current interrupts|Shared interrupts|improvement| |-----|------------------|-----------------|-----------| |14 |1.6M/sec |0.4M/sec |72% | |-----|------------------|-----------------|-----------| |20 |2.8M/sec |0.6M/sec |72.4% | |-----|------------------|-----------------|-----------| |28 |2.9M/sec |0.8M/sec |63.4% | ==================================================================== |Cores|Current 99.99th PCTL lat|Shared 99.99th PCTL lat|improvement| |-----|------------------------|-----------------------|-----------| |14 |67ms |6ms |90.9% | |-----|------------------------|-----------------------|-----------| |20 |5ms |6ms |-10% | |-----|------------------------|-----------------------|-----------| |28 |8.7ms |6ms |25.9% | |=================================================================== Performance improvement with sixteen disks (sixteen CQs per core) is comparable. Link: https://lore.kernel.org/r/1590568495-101621-3-git-send-email-yaminf@mellanox.com Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-06RDMA: Allow ib_client's to fail when add() is calledJason Gunthorpe
When a client is added it isn't allowed to fail, but all the client's have various failure paths within their add routines. This creates the very fringe condition where the client was added, failed during add and didn't set the client_data. The core code will then still call other client_data centric ops like remove(), rename(), get_nl_info(), and get_net_dev_by_params() with NULL client_data - which is confusing and unexpected. If the add() callback fails, then do not call any more client ops for the device, even remove. Remove all the now redundant checks for NULL client_data in ops callbacks. Update all the add() callbacks to return error codes appropriately. EOPNOTSUPP is used for cases where the ULP does not support the ib_device - eg because it only works with IB. Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-13RDMA/core: Fix missing error check on dev_set_name()Jason Gunthorpe
If name memory allocation fails the name will be left empty and device_add_one() will crash: kobject: (0000000004952746): attempted to be registered with empty name! WARNING: CPU: 0 PID: 329 at lib/kobject.c:234 kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 329 Comm: syz-executor.5 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Code: 1a 98 ca f9 e9 f0 f8 ff ff 4c 89 f7 e8 6d 98 ca f9 e9 95 f9 ff ff e8 c3 f0 8b f9 4c 89 e6 48 c7 c7 a0 0e 1a 89 e8 e3 41 5c f9 <0f> 0b 41 bd ea ff ff ff e9 52 ff ff ff e8 a2 f0 8b f9 0f 0b e8 9b RSP: 0018:ffffc90005b27908 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815eae46 RDI: fffff52000b64f13 RBP: ffffc90005b27960 R08: ffff88805aeba480 R09: ffffed1015d06659 R10: ffffed1015d06658 R11: ffff8880ae8332c7 R12: ffff8880a37fd000 R13: 0000000000000000 R14: ffff888096691780 R15: 0000000000000001 kobject_add_varg lib/kobject.c:390 [inline] kobject_add+0x150/0x1c0 lib/kobject.c:442 device_add+0x3be/0x1d00 drivers/base/core.c:2412 add_one_compat_dev drivers/infiniband/core/device.c:901 [inline] add_one_compat_dev+0x46a/0x7e0 drivers/infiniband/core/device.c:857 rdma_dev_init_net+0x2eb/0x490 drivers/infiniband/core/device.c:1120 ops_init+0xb3/0x420 net/core/net_namespace.c:137 setup_net+0x2d5/0x8b0 net/core/net_namespace.c:327 copy_net_ns+0x29e/0x5a0 net/core/net_namespace.c:468 create_new_namespaces+0x403/0xb50 kernel/nsproxy.c:108 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:229 ksys_unshare+0x444/0x980 kernel/fork.c:2955 __do_sys_unshare kernel/fork.c:3023 [inline] __se_sys_unshare kernel/fork.c:3021 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3021 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: https://lore.kernel.org/r/20200309193200.GA10633@ziepe.ca Cc: stable@kernel.org Fixes: 4e0f7b907072 ("RDMA/core: Implement compat device/sysfs tree in net namespace") Reported-by: syzbot+ab4dae63f7d310641ded@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-10RDMA/core: Remove err in iw_query_portGuoqing Jiang
Since we can return device->ops.query_port directly, so no need to keep those lines. Link: https://lore.kernel.org/r/20200109134043.15568-1-guoqing.jiang@cloud.ionos.com Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-07IB/core: Rename event_handler_lock to qp_open_list_lockParav Pandit
This lock is used to protect the qp->open_list linked list. As a side effect it seems to also globally serialize the qp event_handler, but it isn't clear if that is a deliberate design. Link: https://lore.kernel.org/r/20191212113024.336702-5-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-07IB/core: Let IB core distribute cache update eventsParav Pandit
Currently when the low level driver notifies Pkey, GID, and port change events they are notified to the registered handlers in the order they are registered. IB core and other ULPs such as IPoIB are interested in GID, LID, Pkey change events. Since all GID queries done by ULPs are serviced by IB core, and the IB core deferes cache updates to a work queue, it is possible for other clients to see stale cache data when they handle their own events. For example, the below call tree shows how ipoib will call rdma_query_gid() concurrently with the update to the cache sitting in the WQ. mlx5_ib_handle_event() ib_dispatch_event() ib_cache_event() queue_work() -> slow cache update [..] ipoib_event() queue_work() [..] work handler ipoib_ib_dev_flush_light() __ipoib_ib_dev_flush() ipoib_dev_addr_changed_valid() rdma_query_gid() <- Returns old GID, cache not updated. Move all the event dispatch to a work queue so that the cache update is always done before any clients are notified. Fixes: f35faa4ba956 ("IB/core: Simplify ib_query_gid to always refer to cache") Link: https://lore.kernel.org/r/20191212113024.336702-3-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-30Merge tag 'for-linus-hmm' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull hmm updates from Jason Gunthorpe: "This is another round of bug fixing and cleanup. This time the focus is on the driver pattern to use mmu notifiers to monitor a VA range. This code is lifted out of many drivers and hmm_mirror directly into the mmu_notifier core and written using the best ideas from all the driver implementations. This removes many bugs from the drivers and has a very pleasing diffstat. More drivers can still be converted, but that is for another cycle. - A shared branch with RDMA reworking the RDMA ODP implementation - New mmu_interval_notifier API. This is focused on the use case of monitoring a VA and simplifies the process for drivers - A common seq-count locking scheme built into the mmu_interval_notifier API usable by drivers that call get_user_pages() or hmm_range_fault() with the VA range - Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev drivers to the new API. This deletes a lot of wonky driver code. - Two improvements for hmm_range_fault(), from testing done by Ralph" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap mm/hmm: make full use of walk_page_range() xen/gntdev: use mmu_interval_notifier_insert mm/hmm: remove hmm_mirror and related drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror drm/amdgpu: Call find_vma under mmap_sem nouveau: use mmu_interval_notifier instead of hmm_mirror nouveau: use mmu_notifier directly for invalidate_range_start drm/radeon: use mmu_interval_notifier_insert RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv RDMA/odp: Use mmu_interval_notifier_insert() mm/hmm: define the pre-processor related parts of hmm.h even if disabled mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror mm/mmu_notifier: add an interval tree notifier mm/mmu_notifier: define the header pre-processor parts even if disabled mm/hmm: allow snapshot of the special zero page
2019-11-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Again another fairly quiet cycle with few notable core code changes and the usual variety of driver bug fixes and small improvements. - Various driver updates and bug fixes for siw, bnxt_re, hns, qedr, iw_cxgb4, vmw_pvrdma, mlx5 - Improvements in SRPT from working with iWarp - SRIOV VF support for bnxt_re - Skeleton kernel-doc files for drivers/infiniband - User visible counters for events related to ODP - Common code for tracking of mmap lifetimes so that drivers can link HW object liftime to a VMA - ODP bug fixes and rework - RDMA READ support for efa - Removal of the very old cxgb3 driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (168 commits) RDMA/hns: Delete unnecessary callback functions for cq RDMA/hns: Rename the functions used inside creating cq RDMA/hns: Redefine the member of hns_roce_cq struct RDMA/hns: Redefine interfaces used in creating cq RDMA/efa: Expose RDMA read related attributes RDMA/efa: Support remote read access in MR registration RDMA/efa: Store network attributes in device attributes IB/hfi1: remove redundant assignment to variable ret RDMA/bnxt_re: Fix missing le16_to_cpu RDMA/bnxt_re: Fix stat push into dma buffer on gen p5 devices RDMA/bnxt_re: Fix chip number validation Broadcom's Gen P5 series RDMA/bnxt_re: Fix Kconfig indentation IB/mlx5: Implement callbacks for getting VFs GUID attributes IB/ipoib: Add ndo operation for getting VFs GUID attributes IB/core: Add interfaces to get VF node and port GUIDs net/core: Add support for getting VF GUIDs RDMA/qedr: Fix null-pointer dereference when calling rdma_user_mmap_get_offset RDMA/cm: Use refcount_t type for refcount variable IB/mlx5: Support extended number of strides for Striding RQ IB/mlx4: Update HW GID table while adding vlan GID ...
2019-11-25Merge branch 'ib-guids' into rdma.git for-nextJason Gunthorpe
Danit Goldberg says: ==================== This series extends RTNETLINK to provide IB port and node GUIDs, which were configured for Infiniband VFs. The functionality to set VF GUIDs already existed for a long time, and here we are adding the missing "get" so that netlink will be symmetric and various cloud orchestration tools will be able to manage such VFs more naturally. The iproute2 was extended too to present those GUIDs. - ip link show <device> For example: - ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33 - ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10 - ip link show ib4 ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'ib-guids': (35 commits) IB/mlx5: Implement callbacks for getting VFs GUID attributes IB/ipoib: Add ndo operation for getting VFs GUID attributes IB/core: Add interfaces to get VF node and port GUIDs net/core: Add support for getting VF GUIDs net/mlx5: Add new chain for netfilter flow table offload net/mlx5: Refactor creating fast path prio chains net/mlx5: Accumulate levels for chains prio namespaces net/mlx5: Define fdb tc levels per prio net/mlx5: Rename FDB_* tc related defines to FDB_TC_* defines net/mlx5: Simplify fdb chain and prio eswitch defines IB/mlx5: Load profile according to RoCE enablement state IB/mlx5: Rename profile and init methods net/mlx5: Handle "enable_roce" devlink param net/mlx5: Document flow_steering_mode devlink param devlink: Add new "enable_roce" generic device param net/mlx5: fix spelling mistake "metdata" -> "metadata" net/mlx5: fix kvfree of uninitialized pointer spec IB/mlx5: Introduce and use mlx5_core_is_vf() net/mlx5: E-switch, Enable metadata on own vport net/mlx5: Refactor ingress acl configuration ... Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-23RDMA/odp: Use mmu_interval_notifier_insert()Jason Gunthorpe
Replace the internal interval tree based mmu notifier with the new common mmu_interval_notifier_insert() API. This removes a lot of code and fixes a deadlock that can be triggered in ODP: zap_page_range() mmu_notifier_invalidate_range_start() [..] ib_umem_notifier_invalidate_range_start() down_read(&per_mm->umem_rwsem) unmap_single_vma() [..] __split_huge_page_pmd() mmu_notifier_invalidate_range_start() [..] ib_umem_notifier_invalidate_range_start() down_read(&per_mm->umem_rwsem) // DEADLOCK mmu_notifier_invalidate_range_end() up_read(&per_mm->umem_rwsem) mmu_notifier_invalidate_range_end() up_read(&per_mm->umem_rwsem) The umem_rwsem is held across the range_start/end as the ODP algorithm for invalidate_range_end cannot tolerate changes to the interval tree. However, due to the nested invalidation regions the second down_read() can deadlock if there are competing writers. The new core code provides an alternative scheme to solve this problem. Fixes: ca748c39ea3f ("RDMA/umem: Get rid of per_mm->notifier_count") Link: https://lore.kernel.org/r/20191112202231.3856-6-jgg@ziepe.ca Tested-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-22IB/core: Add interfaces to get VF node and port GUIDsDanit Goldberg
Provide ability to get node and port GUIDs of VFs to be symmetrical to already existing set option. Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-11-06RDMA/core: Fix return code when modify_port isn't supportedKamal Heib
Improve return code from ib_modify_port() by doing the following: - Use "-EOPNOTSUPP" instead "-ENOSYS" which is the proper return code - Allow only fake IB_PORT_CM_SUP manipulation for RoCE providers that didn't implement the modify_port callback, otherwise return "-EOPNOTSUPP" Fixes: 61e0962d5221 ("IB: Avoid ib_modify_port() failure for RoCE devices") Link: https://lore.kernel.org/r/20191028155931.1114-2-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06RDMA/core: Create mmap database and cookie helper functionsMichal Kalderon
Create some common API's for adding entries to a xa_mmap. Searching for an entry and freeing one. The general approach is copied from the EFA driver and improved to be more general and do more to help the drivers. Integration with the core allows a reference counted scheme with a free function so that the driver can know when its mmaps are all gone. This significant new functionality will be helpful for drivers to have the correct lifetime model for mmap objects. Link: https://lore.kernel.org/r/20191030094417.16866-3-michal.kalderon@marvell.com Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28Merge tag 'v5.4-rc5' into rdma.git for-nextJason Gunthorpe
Linux 5.4-rc5 For dependencies in the next patches Conflict resolved by keeping the delete of the unlock. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/core: Set DMA parameters correctlyBart Van Assche
The dma_set_max_seg_size() call in setup_dma_device() does not have any effect since device->dev.dma_parms is NULL. Fix this by initializing device->dev.dma_parms first. Link: https://lore.kernel.org/r/20191025225830.257535-5-bvanassche@acm.org Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-24IB/core: Avoid deadlock during netlink message handlingParav Pandit
When rdmacm module is not loaded, and when netlink message is received to get char device info, it results into a deadlock due to recursive locking of rdma_nl_mutex with the below call sequence. [..] rdma_nl_rcv() mutex_lock() [..] rdma_nl_rcv_msg() ib_get_client_nl_info() request_module() iw_cm_init() rdma_nl_register() mutex_lock(); <- Deadlock, acquiring mutex again Due to above call sequence, following call trace and deadlock is observed. kernel: __mutex_lock+0x35e/0x860 kernel: ? __mutex_lock+0x129/0x860 kernel: ? rdma_nl_register+0x1a/0x90 [ib_core] kernel: rdma_nl_register+0x1a/0x90 [ib_core] kernel: ? 0xffffffffc029b000 kernel: iw_cm_init+0x34/0x1000 [iw_cm] kernel: do_one_initcall+0x67/0x2d4 kernel: ? kmem_cache_alloc_trace+0x1ec/0x2a0 kernel: do_init_module+0x5a/0x223 kernel: load_module+0x1998/0x1e10 kernel: ? __symbol_put+0x60/0x60 kernel: __do_sys_finit_module+0x94/0xe0 kernel: do_syscall_64+0x5a/0x270 kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe process stack trace: [<0>] __request_module+0x1c9/0x460 [<0>] ib_get_client_nl_info+0x5e/0xb0 [ib_core] [<0>] nldev_get_chardev+0x1ac/0x320 [ib_core] [<0>] rdma_nl_rcv_msg+0xeb/0x1d0 [ib_core] [<0>] rdma_nl_rcv+0xcd/0x120 [ib_core] [<0>] netlink_unicast+0x179/0x220 [<0>] netlink_sendmsg+0x2f6/0x3f0 [<0>] sock_sendmsg+0x30/0x40 [<0>] ___sys_sendmsg+0x27a/0x290 [<0>] __sys_sendmsg+0x58/0xa0 [<0>] do_syscall_64+0x5a/0x270 [<0>] entry_SYSCALL_64_after_hwframe+0x49/0xbe To overcome this deadlock and to allow multiple netlink messages to progress in parallel, following scheme is implemented. 1. Split the lock protecting the cb_table into a per-index lock, and make it a rwlock. This lock is used to ensure no callbacks are running after unregistration returns. Since a module will not be registered once it is already running callbacks, this avoids the deadlock. 2. Use smp_store_release() to update the cb_table during registration so that no lock is required. This avoids lockdep problems with thinking all the rwsems are the same lock class. Fixes: 0e2d00eb6fd45 ("RDMA: Add NLDEV_GET_CHARDEV to allow char dev discovery and autoload") Link: https://lore.kernel.org/r/20191015080733.18625-1-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22RDMA/nldev: Provide MR statisticsErez Alfasi
Add RDMA nldev netlink interface for dumping MR statistics information. Output example: $ ./ibv_rc_pingpong -o -P -s 500000000 local address: LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID :: $ rdma stat show mr dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0 Link: https://lore.kernel.org/r/20191016062308.11886-5-leon@kernel.org Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix core/ kernel-doc notationrd.dunlab@gmail.com
Correct function parameter names (typos or renames). Add kernel-doc notation for missing function parameters. ../drivers/infiniband/core/sa_query.c:1263: warning: Function parameter or member 'gid_attr' not described in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/sa_query.c:1263: warning: Excess function parameter 'sgid_attr' description in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/device.c:145: warning: Function parameter or member 'dev' not described in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:145: warning: Excess function parameter 'device' description in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:1333: warning: Function parameter or member 'name' not described in 'ib_register_device' ../drivers/infiniband/core/device.c:1461: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1461: warning: Excess function parameter 'device' description in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1483: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_and_put' ../drivers/infiniband/core/device.c:1550: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_queued' Link: https://lore.kernel.org/r/20191010035240.191542461@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-01RDMA/core: Fix return code when modify_device isn't supportedKamal Heib
The proper return code is "-EOPNOTSUPP" when modify_device callback is not supported. Link: https://lore.kernel.org/r/20190923104158.5331-2-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-01RDMA/core: Fix use after free and refcnt leak on ndev in_device in ↵Michal Kalderon
iwarp_query_port If an iWARP driver is probed and removed while there are no ips set for the device, it will lead to a reference count leak on the inet device of the netdevice. In addition, the netdevice was accessed after already calling netdev_put, which could lead to using the netdev after already freed. Fixes: 4929116bdf72 ("RDMA/core: Add common iWARP query port") Link: https://lore.kernel.org/r/20190925123332.10746-1-michal.kalderon@marvell.com Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21Merge branch 'odp_fixes' into rdma.git for-nextJason Gunthorpe
Jason Gunthorpe says: ==================== This is a collection of general cleanups for ODP to clarify some of the flows around umem creation and use of the interval tree. ==================== The branch is based on v5.3-rc5 due to dependencies * odp_fixes: RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr RDMA/mlx5: Use ib_umem_start instead of umem.address RDMA/core: Make invalidate_range a device operation RDMA/odp: Use kvcalloc for the dma_list and page_list RDMA/odp: Check for overflow when computing the umem_odp end RDMA/odp: Provide ib_umem_odp_release() to undo the allocs RDMA/odp: Split creating a umem_odp from ib_umem_get RDMA/odp: Make the three ways to create a umem_odp clear RMDA/odp: Consolidate umem_odp initialization RDMA/odp: Make it clearer when a umem is an implicit ODP umem RDMA/odp: Iterate over the whole rbtree directly RDMA/odp: Use the common interval tree library instead of generic RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21RDMA/core: Make invalidate_range a device operationMoni Shoua
The callback function 'invalidate_range' is implemented in a driver so the place for it is in the ib_device_ops structure and not in ib_ucontext. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Link: https://lore.kernel.org/r/20190819111710.18440-11-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-12RDMA/core: Add common iWARP query portKamal Heib
Add support for a common iWARP query port function, the new function includes a common code that is used by the iWARP devices to update the port attributes like max_mtu, active_mtu, state, and phys_state, the function also includes a call for the driver-specific query_port callback to query the device-specific port attributes. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Link: https://lore.kernel.org/r/20190807103138.17219-4-kamalheib1@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Remove the lock around remove_client_contextJason Gunthorpe
Due to the complexity of client->remove() callbacks it is desirable to not hold any locks while calling them. Remove the last one by tracking only the highest client ID and running backwards from there over the xarray. Since the only purpose of that lock was to protect the linked list, we can drop the lock. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01RDMA/devices: Do not deadlock during client removalJason Gunthorpe
lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: <stable@vger.kernel.org> Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-25RDMA/core: Support netlink commands in non init_net net namespacesParav Pandit
Now that IB core supports RDMA device binding with specific net namespace, enable IB core to accept netlink commands in non init_net namespaces. This is done by having per net namespace netlink socket. At present only netlink device handling client RDMA_NL_NLDEV supports device handling in multiple net namespaces. Hence do not accept netlink messages for other clients in non init_net net namespaces. Link: https://lore.kernel.org/r/20190723070205.6247-1-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25RDMA/core: Annotate destroy of mutex to ensure that it is released as unlockedParav Pandit
While compiled with CONFIG_DEBUG_MUTEXES, the kernel ensures that mutex is not held during destroy. Hence add mutex_destroy() for mutexes used in RDMA modules. Link: https://lore.kernel.org/r/20190723065733.4899-2-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-08Merge branch 'next-integrity' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "Bug fixes, code clean up, and new features: - IMA policy rules can be defined in terms of LSM labels, making the IMA policy dependent on LSM policy label changes, in particular LSM label deletions. The new environment, in which IMA-appraisal is being used, frequently updates the LSM policy and permits LSM label deletions. - Prevent an mmap'ed shared file opened for write from also being mmap'ed execute. In the long term, making this and other similar changes at the VFS layer would be preferable. - The IMA per policy rule template format support is needed for a couple of new/proposed features (eg. kexec boot command line measurement, appended signatures, and VFS provided file hashes). - Other than the "boot-aggregate" record in the IMA measuremeent list, all other measurements are of file data. Measuring and storing the kexec boot command line in the IMA measurement list is the first buffer based measurement included in the measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: integrity: Introduce struct evm_xattr ima: Update MAX_TEMPLATE_NAME_LEN to fit largest reasonable definition KEXEC: Call ima_kexec_cmdline to measure the boot command line args IMA: Define a new template field buf IMA: Define a new hook to measure the kexec boot command line arguments IMA: support for per policy rule template formats integrity: Fix __integrity_init_keyring() section mismatch ima: Use designated initializers for struct ima_event_data ima: use the lsm policy update notifier LSM: switch to blocking policy update notifiers x86/ima: fix the Kconfig dependency for IMA_ARCH_POLICY ima: Make arch_policy_entry static ima: prevent a file already mmap'ed write to be mmap'ed execute x86/ima: check EFI SetupMode too
2019-07-08RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlinkYamin Friedman
Added parameter in ib_device for enabling dynamic interrupt moderation so that it can be configured in userspace using rdma tool. In order to set adaptive-moderation for an ib device the command is: rdma dev set [DEV] adaptive-moderation [on|off] Please set on/off. rdma dev show 0: mlx5_0: node_type ca fw 16.26.0055 node_guid 248a:0703:00a5:29d0 sys_image_guid 248a:0703:00a5:29d0 adaptive-moderation on rdma resource show cq dev mlx5_0 cqn 0 cqe 1023 users 4 poll-ctx UNBOUND_WORKQUEUE adaptive-moderation off comm [ib_core] Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-05RDMA/netlink: Implement counter dumpit calbackMark Zhang
This patch adds the ability to return all available counters together with their properties and hwstats. Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 00:49:13 +0000