| Age | Commit message (Collapse) | Author |
|---|
|
The KX022A provides the accelerometer data in two subsequent registers.
The registers are laid out so that the value obtained via bulk-read of
these registers can be interpreted as signed 16-bit little endian value.
The read value is converted to cpu_endianes and stored into 32bit integer.
The le16_to_cpu() casts value to unsigned 16-bit value, and when this is
assigned to 32-bit integer the resulting value will always be positive.
This has not been a problem to users (at least not all users) of the sysfs
interface, who know the data format based on the scan info and who have
converted the read value back to 16-bit signed value. This isn't
compliant with the ABI however.
This, however, will be a problem for those who use the in-kernel
interfaces, especially the iio_read_channel_processed_scale().
The iio_read_channel_processed_scale() performs multiplications to the
returned (always positive) raw value, which will cause strange results
when the data from the sensor has been negative.
Fix the read_raw format by casting the result of the le_to_cpu() to
signed 16-bit value before assigning it to the integer. This will make
the negative readings to be correctly reported as negative.
This fix will be visible to users by changing values returned via sysfs
to appear in correct (negative) format.
Reported-by: Kalle Niemi <kaleposti@gmail.com>
Fixes: 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Kalle Niemi <kaleposti@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://patch.msgid.link/ZyIxm_zamZfIGrnB@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In iio_gts_build_avail_time_table(), it is checked that gts->num_itime is
non-zero, but gts->num_itime is not checked in gain_to_scaletables(). The
variable time_idx is initialized as gts->num_itime - 1. This implies that
time_idx might initially be set to -1 (0 - 1 = -1). Consequently, using
while (time_idx--) could lead to an infinite loop.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241031014626.2313077-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Initialize the variable ret at the time of declaration to prevent it from
being returned without a defined value. Fixes smatch warning:
drivers/iio/industrialio-gts-helper.c:256 gain_to_scaletables() error:
uninitialized symbol 'ret'.
Cc: stable@vger.kernel.org # v6.6+
Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241031014505.2313035-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix reading unsigned data from the AD4000 ADC via the _raw sysfs
attribute by ensuring that *val is set before returning from
ad4000_single_conversion(). This was not being set in any code path
and was causing the attribute to return a random value.
Fixes: 938fd562b974 ("iio: adc: Add support for AD4000")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241030-iio-adc-ad4000-fix-reading-unsigned-data-v1-1-2e28dd75fe29@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero.
Fixes: 9085daa4abcc ("staging: iio: ad7780: add gain & filter gpio support")
Cc: stable@vger.kernel.org
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241028142027.1032332-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD7923 was updated to support devices with 8 channels, but the size
of tx_buf and ring_xfer was not increased accordingly, leading to a
potential buffer overflow in ad7923_update_scan_mode().
Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Link: https://patch.msgid.link/20241029134637.2261336-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
It should be fwnode_back passed to IS_ERR().
Fixes: c464cc610f51 ("iio: add child nodes support in iio backend framework")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20241028135215.1549-1-yangyingliang@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When multiple ODR switch happens during FIFO off, the change could
not be taken into account if you get back to previous FIFO on value.
For example, if you run sensor buffer at 50Hz, stop, change to
200Hz, then back to 50Hz and restart buffer, data will be timestamped
at 200Hz. This due to testing against mult and not new_mult.
To prevent this, let's just run apply_odr automatically when FIFO is
off. It will also simplify driver code.
Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr.
Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241021-invn-inv-sensors-timestamp-fix-switch-fifo-off-v2-1-39ffd43edcc4@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of using enum, out of which only a couple of values
are being actually used, make a comparisons against pointer
to the respective chip_info structures.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert odr_start_up_times array to the variable in chip_info.
Tweak whitespace for readablity whilst here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move odr_start_up_times up in the code in a preparation of
the further cleaning up changes.
While at it, make it clear what values from enum are being used for
the respective array entries.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Instead of having a enum and keeping IDs as driver data pointers,
just have a chip_info struct per supported device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rename kxcjk1013_info to kxcjk1013_iio_info in preparatory of
further cleaning up changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use local variable for regs in preparatory of further cleaning up changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.
Removing instances of this approach from IIO also stops them being
copied into new drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The mentioned change effectively broke the ODR startup timeouts
settungs for KX023-1025 case. Let's revert it for now and see
how we can handle it with the better approach after switching
the driver to use data structure instead of enum.
This reverts commit d5cbe1502043124ff8af8136b80f93758c4a61e0.
Fixes: d5cbe1502043 ("iio: accel: kxcjk-1013: Add support for KX022-1020")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ACPI IDs are defined in the respective ID tables. Puting them
to the I²C ID legacy table has no meaning. Remove that ID.
Fixes: 3bfa74f86006 ("iio:kxcjk-1013: Add support for SMO8500 device")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A few drivers duplicate the code to retrieve ACPI device instance name.
Some of them want an associated driver data as well.
In order of deduplication introduce the common helper functions.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
By using ACPI_HANDLE() the handler argument can be retrieved directly.
Replace ACPI_COMPANION() + dereference with ACPI_HANDLE().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When device is enumerated via ACPI the respective device node is of
ACPI device type. Use that to check for ACPI enumeration, rather than
calling for full match which is O(n) vs. O(1) for the regular check.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When device is enumerated via ACPI the respective device node is of
ACPI device type. Use that to check for ACPI enumeration, rather than
calling for full match which is O(n) vs. O(1) for the regular check.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since there is no ACPI IDs for this driver to be served for,
drop dead ACPI bits from it completely.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD7607, AD7608 and AD7609 are some older parts of the AD7606 family.
They are hardware-only, meaning that they don't have any registers
accessible via SPI or Parallel interface.
They are more similar to the AD7605-4 part, which is supported by the
'ad7606' driver, and are configurable via GPIOs.
Like the AD7605-4 part, all 3 parts have 2 CONVST (Conversion Start) pins
(CONVST A and CONVST B). But in practice, these should be tied together to
make reading of samples easier via a serial line.
The AD7607 has an 14-bit resolution and AD7608 & AD7609 have an 18-bit
resolution. The main difference between the AD7608 & AD7609 is that the
AD7609 has a larger range (±10V & ±20V) vs the ±5V & ±10V ranges for AD7608.
However, unlike AD7605-4 part, these 3 parts have oversampling which is
configurable (like for the AD7606 in HW-mode) via GPIOs.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7607.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7608.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7609.pdf
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-6-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The main driver for this change is the AD7607 part, which has a scale of
"1.220703" for the ±10V range. The AD7607 has a resolution of 14-bits.
So, just adding the scale-available list for that part would require some
quirks to handle just that scale value.
But to do it more neatly, the best approach is to rework the scale
available lists to have the same format as it is returned to userspace.
That way, we can also get rid of the allocation for the 'scale_avail_show'
array.
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-4-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currently the 'ad7606' driver supports parts with 18 and 16 bits
resolutions.
But when adding support for AD7607 (which has a 14-bit resolution) we
should check for the 'realbits' field, to be able to sign-extend correctly.
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-3-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When the mutexes were reworked to guards, the caching of the
oversampling_ratio values was removed by accident.
The main effect of this change is that, after setting the
oversampling_ratio value, reading it back would result in the initial value
(of 1).
The value would get sent to the device correctly though.
Fixes 2956979dbd0d: ("iio: adc: ad7606: switch mutexes to guard")
Signed-off-by: Alexandru Ardelean <aardelean@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241025095939.271811-2-aardelean@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Prepare the bmi270 driver to support similar devices like the bmi260.
Signed-off-by: Justin Weiss <justin@justinweiss.com>
Link: https://patch.msgid.link/20241020220011.212395-3-justin@justinweiss.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
These attributes are not currently wired up, and will always return
EINVAL.
Fixes: 3ea51548d6b2 ("iio: imu: Add i2c driver for bmi270 imu")
Signed-off-by: Justin Weiss <justin@justinweiss.com>
Link: https://patch.msgid.link/20241020220011.212395-2-justin@justinweiss.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linus already once did that for PDx86, don't repeat our mistakes.
TL;DR: 'n' *is* the default 'default'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241022143600.3314241-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Linus already once did that for PDx86, don't repeat our mistakes.
TL;DR: 'n' *is* the default 'default'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241022143605.3314275-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
e4ca0e59c394 ("types: Complement the aligned types with signed 64-bit one")
introduced aligned_s64. Use it for all IIO accelerometer drivers.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20241020180720.496327-1-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
TI's opt3002 light sensor shares most properties with the opt3001
model, with the exception of supporting a wider spectrum range.
Add support for TI's opt3002 by extending the TI opt3001 driver.
Datasheet: https://www.ti.com/product/OPT3002
Signed-off-by: Emil Gedenryd <emil.gedenryd@axis.com>
Link: https://patch.msgid.link/20241003-add_opt3002-v4-2-c550dc4591b4@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for AD7770, AD7771, AD7779 ADCs. The device is capable of
sending out data both on DOUT lines interface,as on the SDO line.
The driver currently implements only the SDO data streaming mode. SPI
communication is used alternatively for accessing registers and streaming
data. Register accesses are protected by crc8.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Link: https://patch.msgid.link/20241014143204.30195-4-ramona.nechita@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If REGMAP_SPI is n and LTC2664 is y, the following build error occurs:
riscv64-unknown-linux-gnu-ld: drivers/iio/dac/ltc2664.o: in function `ltc2664_probe':
ltc2664.c:(.text+0x714): undefined reference to `__devm_regmap_init_spi'
Select REGMAP_SPI instead of REGMAP for LTC2664 to fix it.
Fixes: 4cc2fc445d2e ("iio: dac: ltc2664: Add driver for LTC2664 and LTC2672")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20241024015553.1111253-1-ruanjinjie@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the ad7124_write_raw() function, parameter val can potentially
be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST()
is called within ad7124_set_channel_odr(). The ad7124_write_raw()
function is invoked through the sequence: iio_write_channel_raw() ->
iio_write_channel_attribute() -> iio_channel_write(), with no checks
in place to ensure val is non-zero.
Cc: stable@vger.kernel.org
Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241022134330.574601-1-quzicheng@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad7380-4 is the only device in the family that does not have an internal
reference. It uses "refin" as a required external reference.
All other devices in the family use "refio"" as an optional external
reference.
Fixes: 737413da8704 ("iio: adc: ad7380: add support for ad738x-4 4 channels variants")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-4-f0cefe1b7fa6@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
vcc and vlogic are required but are not retrieved and enabled in the
probe. Add them.
In order to prepare support for additional parts requiring different
supplies, add vcc and vlogic to the platform specific structures
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-3-f0cefe1b7fa6@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use devm_regulator_get_enable_read_voltage() to simplify the code.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20241022-ad7380-fix-supplies-v3-2-f0cefe1b7fa6@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The raw value conversion to obtain a measurement in lux as
INT_PLUS_MICRO does not calculate the decimal part properly to display
it as micro (in this case microlux). It only calculates the module to
obtain the decimal part from a resolution that is 10000 times the
provided in the datasheet (0.5376 lux/cnt for the veml6030). The
resulting value must still be multiplied by 100 to make it micro.
This bug was introduced with the original implementation of the driver.
Only the illuminance channel is fixed becuase the scale is non sensical
for the intensity channels anyway.
Cc: stable@vger.kernel.org
Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241016-veml6030-fix-processed-micro-v1-1-4a5644796437@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since the pwm was introduced before backend, there was a mock use, with
a GPIO emulation. Now that iio backend is introduced, the mock use can
be removed.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-8-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
- Basic support for iio backend.
- Supports IIO_CHAN_INFO_SAMP_FREQ R/W.
- Only hardware mode is available, and that IIO_CHAN_INFO_RAW is not
supported if iio-backend mode is selected.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-7-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This variable determines how many hardware channels has the chip,
oppositely to the num_channels that can contain more channels, e.g a
timestamp channel in our case. Introducing this variable avoids
decreasing the former num_channels variable when reading the ADC's
channels, and clarifies a bit the code.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-6-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
On the parallel version, the current implementation is only compatible
with id tables and won't work with fw_nodes, this commit intends to fix
it.
Doing so required to declare ad7606_chip_info structures in the .h file
so to make them accessible to all the driver files that can set a
pointer to the corresponding chip as the driver data.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-5-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Until now, the conversion were triggered by setting high the GPIO
connected to the convst pin. This commit gives the possibility to
connect the convst pin to a PWM.
Connecting a PWM allows to have a better control on the samplerate,
but it must be handled with care, as it is completely decorrelated of
the driver's busy pin handling.
Hence it is not recommended to be used "as is" but must be exploited
in conjunction with IIO backend, and for now only a mock functionality
is enabled, i.e PWM never swings, but is used as a GPIO, i.e duty_cycle
== period equals high state, duty_cycle == 0 equals low state.
This mock functionality will be disabled after the IIO backend usecase
is introduced.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-4-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Make use of mutex guard() and IIO iio_device_claim_direct_scoped() to
simplify code and error handling.
While at it, use devm_mutex_init() to initialize the mutex.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-3-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
It's highly unlikely for the converter ref voltage to change at runtime.
Hence, let's read the voltage and save it (instead of the regulator
struct). While at it, simplify the code by using
devm_regulator_get_enable_read_voltage().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-2-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We just need the reset gpio during probe so there's no need to keep it
in our state struct. Hence, move devm_gpiod_get_optional() into
ad74413r_reset() and use a local struct gpio_desc.
While at it, request the gpio in the asserted state (GPIOD_OUT_HIGH) so
that we already perform the reset while requesting the gpio saving us a
call to gpiod_set_value_cansleep().
Also, explicitly include <gpio/consumer.h> for
devm_gpiod_get_optional().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-1-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Define the integration time within the configuration register as a field
to easy its handling as an index, preparing the driver to support
configurable integration times.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241017-veml6070-integration-time-v1-2-3507d17d562a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Trivial modification to use the recommended keyword 'int' after
'unsigned' for unsigned integers.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241017-veml6070-integration-time-v1-1-3507d17d562a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
spi_get_device_match_data() can return a NULL pointer. Hence, let's
check for it.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241014-fix-error-check-v1-1-089e1003d12f@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
