summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
3 daysiio: hid-sensor-prox: Fix incorrect OFFSET calculationZhang Lixu
[ Upstream commit 79dabbd505210e41c88060806c92c052496dd61c ] The OFFSET calculation in the prox_read_raw() was incorrectly using the unit exponent, which is intended for SCALE calculations. Remove the incorrect OFFSET calculation and set it to a fixed value of 0. Cc: stable@vger.kernel.org Fixes: 39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-4-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [ adapted prox_attr array access to single structure member access ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysiio: hid-sensor-prox: Restore lost scale assignmentsZhang Lixu
[ Upstream commit 83ded7cfaccccd2f4041769c313b58b4c9e265ad ] The variables `scale_pre_decml`, `scale_post_decml`, and `scale_precision` were assigned in commit d68c592e02f6 ("iio: hid-sensor-prox: Fix scale not correct issue"), but due to a merge conflict in commit 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next"), these assignments were lost. Add back lost assignments and replace `st->prox_attr` with `st->prox_attr[0]` because commit 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels") changed `prox_attr` to an array. Cc: stable@vger.kernel.org # 5.13+ Fixes: 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-2-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [ changed st->prox_attr[0] array access to st->prox_attr single struct member ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysiio: adc: ad7949: use spi_is_bpw_supported()David Lechner
[ Upstream commit 7b86482632788acd48d7b9ee1867f5ad3a32ccbb ] Use spi_is_bpw_supported() instead of directly accessing spi->controller ->bits_per_word_mask. bits_per_word_mask may be 0, which implies that 8-bits-per-word is supported. spi_is_bpw_supported() takes this into account while spi_ctrl_mask == SPI_BPW_MASK(8) does not. Fixes: 0b2a740b424e ("iio: adc: ad7949: enable use with non 14/16-bit controllers") Closes: https://lore.kernel.org/linux-spi/c8b8a963-6cef-4c9b-bfef-dab2b7bd0b0f@sirena.org.uk/ Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/20250611-iio-adc-ad7949-use-spi_is_bpw_supported-v1-1-c4e15bfd326e@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
11 daysiio: common: st_sensors: Fix use of uninitialize device structsMaud Spierings
commit 9f92e93e257b33e73622640a9205f8642ec16ddd upstream. Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1] Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ [1] Cc: stable@vger.kernel.org Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://... [1] Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 daysiio: backend: fix out-of-bound writeMarkus Burri
commit da9374819eb3885636934c1006d450c3cb1a02ed upstream. The buffer is set to 80 character. If a caller write more characters, count is truncated to the max available space in "simple_write_to_buffer". But afterwards a string terminator is written to the buffer at offset count without boundary check. The zero termination is written OUT-OF-BOUND. Add a check that the given buffer is smaller then the buffer to prevent. Fixes: 035b4989211d ("iio: backend: make sure to NULL terminate stack buffer") Signed-off-by: Markus Burri <markus.burri@mt.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250508130612.82270-2-markus.burri@mt.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 daysiio: adc: stm32-adc: Fix race in installing chained IRQ handlerChen Ni
commit e8ad595064f6ebd5d2d1a5d5d7ebe0efce623091 upstream. Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250515083101.3811350-1-nichen@iscas.ac.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 daysiio: adc: max1363: Reorder mode_list[] entriesFabio Estevam
commit 8d8d7c1dbc46aa07a76acab7336a42ddd900be10 upstream. The IIO core issues warnings when a scan mask is a subset of a previous entry in the available_scan_masks array. On a board using a MAX11601, the following warning is observed: max1363 1-0064: available_scan_mask 7 subset of 6. Never used This occurs because the entries in the max11607_mode_list[] array are not ordered correctly. To fix this, reorder the entries so that no scan mask is a subset of an earlier one. While at it, reorder the mode_list[] arrays for other supported chips as well, to prevent similar warnings on different variants. Note fixes tag dropped as these were introduced over many commits a long time back and the side effect until recently was a reduction in sampling rate due to reading too many channels when only a few were desired. Now we have a sanity check that reports this error but that is not where the issue was introduced. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 daysiio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]Fabio Estevam
commit 6d21f2c2dd843bceefd9455f2919f6bb526797f0 upstream. Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"), booting a board populated with a MAX11601 results in a flood of warnings: max1363 1-0064: available_scan_mask 8 subset of 0. Never used max1363 1-0064: available_scan_mask 9 subset of 0. Never used max1363 1-0064: available_scan_mask 10 subset of 0. Never used max1363 1-0064: available_scan_mask 11 subset of 0. Never used max1363 1-0064: available_scan_mask 12 subset of 0. Never used max1363 1-0064: available_scan_mask 13 subset of 0. Never used ... These warnings are caused by incorrect offsets used for differential channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros. The max1363_mode_table[] defines the differential channel mappings as follows: MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12), MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13), MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14), MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15), MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16), MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17), MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18), MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19), MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20), MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21), MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22), MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23), Update the macros to follow this same pattern, ensuring that the scan masks are valid and preventing the warnings. Cc: stable@vger.kernel.org Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20250516173900.677821-1-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 daysiio: adc: axp20x_adc: Add missing sentinel to AXP717 ADC channel mapsChen-Yu Tsai
commit 3281ddcea6429f7bc1fdb39d407752dd1371aba9 upstream. The AXP717 ADC channel maps is missing a sentinel entry at the end. This causes a KASAN warning. Add the missing sentinel entry. Fixes: 5ba0cb92584b ("iio: adc: axp20x_adc: add support for AXP717 ADC") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 daysiio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flushSean Nyekjaer
commit 1fe16dc1a2f5057772e5391ec042ed7442966c9a upstream. fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with iio_for_each_active_channel()) without making sure the indio_dev stays in buffer mode. There is a race if indio_dev exits buffer mode in the middle of the interrupt that flushes the fifo. Fix this by calling synchronize_irq() to ensure that no interrupt is currently running when disabling buffer mode. Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [...] _find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290 fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178 fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c irq_thread_fn from irq_thread+0x110/0x1f4 irq_thread from kthread+0xe0/0xfc kthread from ret_from_fork+0x14/0x2c Fixes: 79e3a5bdd9ef ("iio: accel: fxls8962af: add hw buffered sampling") Cc: stable@vger.kernel.org Suggested-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-06iio: dac: ad3552r-common: fix ad3541/2r rangesAngelo Dureghello
[ Upstream commit 1e758b613212b6964518a67939535910b5aee831 ] Fix ad3541/2r voltage ranges to be as per ad3542r datasheet, rev. C, table 38 (page 57). The wrong ad354xr ranges was generating erroneous Vpp output. In more details: - fix wrong number of ranges, they are 5 ranges, not 6, - remove non-existent 0-3V range, - adjust order, since ad3552r_find_range() get a wrong index, producing a wrong Vpp as output. Retested all the ranges on real hardware, EVALAD3542RFMCZ: adi,output-range-microvolt (fdt): <(000000) (2500000)>; ok (Rfbx1, switch 10) <(000000) (5000000)>; ok (Rfbx1, switch 10) <(000000) (10000000)>; ok (Rfbx1, switch 10) <(-5000000) (5000000)>; ok (Rfbx2, switch +/- 5) <(-2500000) (7500000)>; ok (Rfbx2, switch -2.5/7.5) Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support") Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250108-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v2-1-2dac02f04638@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06iio: dac: ad3552r: extract common code (no changes in behavior intended)Angelo Dureghello
[ Upstream commit f665d7d33d7909cf51e2db0f0767ecab0295c0bd ] Extracting common code, to share common code to be used later by the AXI driver version (ad3552r-axi.c). Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-6-f6960b4f9719@kernel-space.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06iio: dac: ad3552r: changes to use FIELD_PREPAngelo Dureghello
[ Upstream commit d5ac6cb1c8f3e14d93e2a50d9357a8acdbc5c166 ] Changes to use FIELD_PREP, so that driver-specific ad3552r_field_prep is removed. Variables (arrays) that was used to call ad3552r_field_prep are removed too. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-5-f6960b4f9719@kernel-space.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06iio: adc: ad_sigma_delta: Fix use of uninitialized status_posPurva Yeshi
[ Upstream commit e5cdb098a3cb165d52282ffc3a6448642953ea13 ] Fix Smatch-detected issue: drivers/iio/adc/ad_sigma_delta.c:604 ad_sd_trigger_handler() error: uninitialized symbol 'status_pos'. The variable `status_pos` was only initialized in specific switch cases (1, 2, 3, 4), which could leave it uninitialized if `reg_size` had an unexpected value. Fix by adding a default case to the switch block to catch unexpected values of `reg_size`. Use `dev_err_ratelimited()` for error logging and `goto irq_handled` instead of returning early. Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com> Link: https://patch.msgid.link/20250410170408.8585-1-purvayeshi550@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-07-06iio: pressure: zpa2326: Use aligned_s64 for the timestampJonathan Cameron
[ Upstream commit 886a446b76afddfad307488e95e87f23a08ffd51 ] On x86_32 s64 fields are only 32-bit aligned. Hence force the alignment of the field and padding in the structure by using aligned_s64 instead. Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-19-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27iio: accel: fxls8962af: Fix temperature calculationSean Nyekjaer
commit 16038474e3a0263572f36326ef85057aaf341814 upstream. According to spec temperature should be returned in milli degrees Celsius. Add in_temp_scale to calculate from Celsius to milli Celsius. Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Cc: stable@vger.kernel.org Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250505-fxls-v4-1-a38652e21738@geanix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27iio: adc: ad7606_spi: fix reg write value maskDavid Lechner
commit 89944d88f8795c6c89b9514cb365998145511cd4 upstream. Fix incorrect value mask for register write. Register values are 8-bit, not 9. If this function was called with a value > 0xFF and an even addr, it would cause writing to the next register. Fixes: f2a22e1e172f ("iio: adc: ad7606: Add support for software mode for ad7616") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Angelo Dureghello <adureghello@baylibre.com> Link: https://patch.msgid.link/20250428-iio-adc-ad7606_spi-fix-write-value-mask-v1-1-a2d5e85a809f@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27iio: adc: ti-ads1298: Kconfig: add kfifo dependency to fix module buildArthur-Prince
commit 3c5dfea39a245b2dad869db24e2830aa299b1cf2 upstream. Add dependency to Kconfig’s ti-ads1298 because compiling it as a module failed with an undefined kfifo symbol. Fixes: 00ef7708fa60 ("iio: adc: ti-ads1298: Add driver") Signed-off-by: Arthur-Prince <r2.arthur.prince@gmail.com> Co-developed-by: Mariana Valério <mariana.valerio2@hotmail.com> Signed-off-by: Mariana Valério <mariana.valerio2@hotmail.com> Link: https://patch.msgid.link/20250430191131.120831-1-r2.arthur.prince@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27iio: adc: ad7944: mask high bits on direct readDavid Lechner
commit 7cdfbc0113d087348b8e65dd79276d0f57b89a10 upstream. Apply a mask to the raw value received over the SPI bus for unsigned direct reads. As we found recently, SPI controllers may not set unused bits to 0 when reading with bits_per_word != {8,16,32}. The ad7944 uses bits_per_word of 14 and 18, so we need to mask the value to be sure we returning the correct value to userspace during a direct read. Fixes: d1efcf8871db ("iio: adc: ad7944: add driver for AD7944/AD7985/AD7986") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-adc-ad7944-max-high-bits-on-direct-read-v1-1-b173facceefe@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27iio: imu: inv_icm42600: Fix temperature calculationSean Nyekjaer
commit e2f820014239df9360064079ae93f838ff3b7f8c upstream. >From the documentation: "offset to be added to <type>[Y]_raw prior toscaling by <type>[Y]_scale" Offset should be applied before multiplying scale, so divide offset by scale to make this correct. Fixes: bc3eb0207fb5 ("iio: imu: inv_icm42600: add temperature sensor support") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250502-imu-v1-1-129b8391a4e3@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27iio: accel: fxls8962af: Fix temperature scan element signSean Nyekjaer
commit 9c78317b42e7c32523c91099859bc4721e9f75dd upstream. Mark the temperature element signed, data read from the TEMP_OUT register is in two's complement format. This will avoid the temperature being mishandled and miss displayed. Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250505-fxls-v4-2-a38652e21738@geanix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19iio: adc: mcp3911: fix device dependent mappings for conversion result registersMarcus Folkesson
[ Upstream commit f62c49d8f32d6ce8871b01795498352775aa61db ] The conversion result registers differs between devices. Make sure the mapping is correct by using a device dependent .get_raw() callback function. Fixes: 732ad34260d3 ("iio: adc: mcp3911: add support for the whole MCP39xx family") Co-developed-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Lukas Rauber <lukas.rauber@janitza.de> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250428-mcp3911-fixes-v2-1-406e39330c3d@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19iio: adc: PAC1934: fix typo in documentation linkMarius Cristea
[ Upstream commit 52c43d80fa8370eb877fc63b1fc1eec67e1b1410 ] Fix a typo,(PAC1934 -> PAC193X), into the link from an application note related to the ACPI device definition. Fixes: 0fb528c8255b ("iio: adc: adding support for PAC193x") Reported-by: Matteo Martelli <matteomartelli3@gmail.com> Closes: https://patch.msgid.link/172794015844.2520.11909797050797595912@njaxe.localdomain Signed-off-by: Marius Cristea <marius.cristea@microchip.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250424-pac1934-doc_link-v1-1-9832445cb270@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19iio: adc: ad7124: Fix 3dB filter frequency readingUwe Kleine-König
[ Upstream commit 8712e4986e7ce42a14c762c4c350f290989986a5 ] The sinc4 filter has a factor 0.23 between Output Data Rate and f_{3dB} and for sinc3 the factor is 0.272 according to the data sheets for ad7124-4 (Rev. E.) and ad7124-8 (Rev. F). Fixes: cef2760954cf ("iio: adc: ad7124: add 3db filter") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://patch.msgid.link/20250317115247.3735016-6-u.kleine-koenig@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19iio: filter: admv8818: Support frequencies >= 2^32Brian Pellegrino
[ Upstream commit 9016776f1301627de78a633bda7c898425a56572 ] This patch allows writing u64 values to the ADMV8818's high and low-pass filter frequencies. It includes the following changes: - Rejects negative frequencies in admv8818_write_raw. - Adds a write_raw_get_fmt function to admv8818's iio_info, returning IIO_VAL_INT_64 for the high and low-pass filter 3dB frequency channels. Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818") Signed-off-by: Brian Pellegrino <bpellegrino@arka.org> Signed-off-by: Sam Winchenbach <swinchenbach@arka.org> Link: https://patch.msgid.link/20250328174831.227202-7-sam.winchenbach@framepointer.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19iio: filter: admv8818: fix range calculationSam Winchenbach
[ Upstream commit d542db7095d322bfcdc8e306db6f8c48358c9619 ] Search for the minimum error while ensuring that the LPF corner frequency is greater than the target, and the HPF corner frequency is lower than the target This fixes issues where the range calculations were suboptimal. Add two new DTS properties to set the margin between the input frequency and the calculated corner frequency Below is a generated table of the differences between the old algorithm and the new. This is a sweep from 0 to 20 GHz in 10 MHz steps. === HPF === freq = 1750 MHz, 3db: bypass => 1750 MHz freq = 3400 MHz, 3db: 3310 => 3400 MHz freq = 3410 MHz, 3db: 3310 => 3400 MHz freq = 3420 MHz, 3db: 3310 => 3400 MHz freq = 3660 MHz, 3db: 3550 => 3656 MHz freq = 6600 MHz, 3db: 6479 => 6600 MHz freq = 6610 MHz, 3db: 6479 => 6600 MHz freq = 6620 MHz, 3db: 6479 => 6600 MHz freq = 6630 MHz, 3db: 6479 => 6600 MHz freq = 6640 MHz, 3db: 6479 => 6600 MHz freq = 6650 MHz, 3db: 6479 => 6600 MHz freq = 6660 MHz, 3db: 6479 => 6600 MHz freq = 6670 MHz, 3db: 6479 => 6600 MHz freq = 6680 MHz, 3db: 6479 => 6600 MHz freq = 6690 MHz, 3db: 6479 => 6600 MHz freq = 6700 MHz, 3db: 6479 => 6600 MHz freq = 6710 MHz, 3db: 6479 => 6600 MHz freq = 6720 MHz, 3db: 6479 => 6600 MHz freq = 6730 MHz, 3db: 6479 => 6600 MHz freq = 6960 MHz, 3db: 6736 => 6960 MHz freq = 6970 MHz, 3db: 6736 => 6960 MHz freq = 6980 MHz, 3db: 6736 => 6960 MHz freq = 6990 MHz, 3db: 6736 => 6960 MHz freq = 7320 MHz, 3db: 7249 => 7320 MHz freq = 7330 MHz, 3db: 7249 => 7320 MHz freq = 7340 MHz, 3db: 7249 => 7320 MHz freq = 7350 MHz, 3db: 7249 => 7320 MHz freq = 7360 MHz, 3db: 7249 => 7320 MHz freq = 7370 MHz, 3db: 7249 => 7320 MHz freq = 7380 MHz, 3db: 7249 => 7320 MHz freq = 7390 MHz, 3db: 7249 => 7320 MHz freq = 7400 MHz, 3db: 7249 => 7320 MHz freq = 7410 MHz, 3db: 7249 => 7320 MHz freq = 7420 MHz, 3db: 7249 => 7320 MHz freq = 7430 MHz, 3db: 7249 => 7320 MHz freq = 7440 MHz, 3db: 7249 => 7320 MHz freq = 7450 MHz, 3db: 7249 => 7320 MHz freq = 7460 MHz, 3db: 7249 => 7320 MHz freq = 7470 MHz, 3db: 7249 => 7320 MHz freq = 7480 MHz, 3db: 7249 => 7320 MHz freq = 7490 MHz, 3db: 7249 => 7320 MHz freq = 7500 MHz, 3db: 7249 => 7320 MHz freq = 12500 MHz, 3db: 12000 => 12500 MHz === LPF === freq = 2050 MHz, 3db: bypass => 2050 MHz freq = 2170 MHz, 3db: 2290 => 2170 MHz freq = 2290 MHz, 3db: 2410 => 2290 MHz freq = 2410 MHz, 3db: 2530 => 2410 MHz freq = 2530 MHz, 3db: 2650 => 2530 MHz freq = 2650 MHz, 3db: 2770 => 2650 MHz freq = 2770 MHz, 3db: 2890 => 2770 MHz freq = 2890 MHz, 3db: 3010 => 2890 MHz freq = 3010 MHz, 3db: 3130 => 3010 MHz freq = 3130 MHz, 3db: 3250 => 3130 MHz freq = 3250 MHz, 3db: 3370 => 3250 MHz freq = 3260 MHz, 3db: 3370 => 3350 MHz freq = 3270 MHz, 3db: 3370 => 3350 MHz freq = 3280 MHz, 3db: 3370 => 3350 MHz freq = 3290 MHz, 3db: 3370 => 3350 MHz freq = 3300 MHz, 3db: 3370 => 3350 MHz freq = 3310 MHz, 3db: 3370 => 3350 MHz freq = 3320 MHz, 3db: 3370 => 3350 MHz freq = 3330 MHz, 3db: 3370 => 3350 MHz freq = 3340 MHz, 3db: 3370 => 3350 MHz freq = 3350 MHz, 3db: 3370 => 3350 MHz freq = 3370 MHz, 3db: 3490 => 3370 MHz freq = 3490 MHz, 3db: 3610 => 3490 MHz freq = 3610 MHz, 3db: 3730 => 3610 MHz freq = 3730 MHz, 3db: 3850 => 3730 MHz freq = 3850 MHz, 3db: 3870 => 3850 MHz freq = 3870 MHz, 3db: 4130 => 3870 MHz freq = 4130 MHz, 3db: 4390 => 4130 MHz freq = 4390 MHz, 3db: 4650 => 4390 MHz freq = 4650 MHz, 3db: 4910 => 4650 MHz freq = 4910 MHz, 3db: 5170 => 4910 MHz freq = 5170 MHz, 3db: 5430 => 5170 MHz freq = 5430 MHz, 3db: 5690 => 5430 MHz freq = 5690 MHz, 3db: 5950 => 5690 MHz freq = 5950 MHz, 3db: 6210 => 5950 MHz freq = 6210 MHz, 3db: 6470 => 6210 MHz freq = 6470 MHz, 3db: 6730 => 6470 MHz freq = 6730 MHz, 3db: 6990 => 6730 MHz freq = 6990 MHz, 3db: 7250 => 6990 MHz freq = 7000 MHz, 3db: 7250 => 7000 MHz freq = 7250 MHz, 3db: 7400 => 7250 MHz freq = 7400 MHz, 3db: 7800 => 7400 MHz freq = 7800 MHz, 3db: 8200 => 7800 MHz freq = 8200 MHz, 3db: 8600 => 8200 MHz freq = 8600 MHz, 3db: 9000 => 8600 MHz freq = 9000 MHz, 3db: 9400 => 9000 MHz freq = 9400 MHz, 3db: 9800 => 9400 MHz freq = 9800 MHz, 3db: 10200 => 9800 MHz freq = 10200 MHz, 3db: 10600 => 10200 MHz freq = 10600 MHz, 3db: 11000 => 10600 MHz freq = 11000 MHz, 3db: 11400 => 11000 MHz freq = 11400 MHz, 3db: 11800 => 11400 MHz freq = 11800 MHz, 3db: 12200 => 11800 MHz freq = 12200 MHz, 3db: 12600 => 12200 MHz freq = 12210 MHz, 3db: 12600 => 12550 MHz freq = 12220 MHz, 3db: 12600 => 12550 MHz freq = 12230 MHz, 3db: 12600 => 12550 MHz freq = 12240 MHz, 3db: 12600 => 12550 MHz freq = 12250 MHz, 3db: 12600 => 12550 MHz freq = 12260 MHz, 3db: 12600 => 12550 MHz freq = 12270 MHz, 3db: 12600 => 12550 MHz freq = 12280 MHz, 3db: 12600 => 12550 MHz freq = 12290 MHz, 3db: 12600 => 12550 MHz freq = 12300 MHz, 3db: 12600 => 12550 MHz freq = 12310 MHz, 3db: 12600 => 12550 MHz freq = 12320 MHz, 3db: 12600 => 12550 MHz freq = 12330 MHz, 3db: 12600 => 12550 MHz freq = 12340 MHz, 3db: 12600 => 12550 MHz freq = 12350 MHz, 3db: 12600 => 12550 MHz freq = 12360 MHz, 3db: 12600 => 12550 MHz freq = 12370 MHz, 3db: 12600 => 12550 MHz freq = 12380 MHz, 3db: 12600 => 12550 MHz freq = 12390 MHz, 3db: 12600 => 12550 MHz freq = 12400 MHz, 3db: 12600 => 12550 MHz freq = 12410 MHz, 3db: 12600 => 12550 MHz freq = 12420 MHz, 3db: 12600 => 12550 MHz freq = 12430 MHz, 3db: 12600 => 12550 MHz freq = 12440 MHz, 3db: 12600 => 12550 MHz freq = 12450 MHz, 3db: 12600 => 12550 MHz freq = 12460 MHz, 3db: 12600 => 12550 MHz freq = 12470 MHz, 3db: 12600 => 12550 MHz freq = 12480 MHz, 3db: 12600 => 12550 MHz freq = 12490 MHz, 3db: 12600 => 12550 MHz freq = 12500 MHz, 3db: 12600 => 12550 MHz freq = 12510 MHz, 3db: 12600 => 12550 MHz freq = 12520 MHz, 3db: 12600 => 12550 MHz freq = 12530 MHz, 3db: 12600 => 12550 MHz freq = 12540 MHz, 3db: 12600 => 12550 MHz freq = 12550 MHz, 3db: 12600 => 12550 MHz freq = 12600 MHz, 3db: 13000 => 12600 MHz freq = 12610 MHz, 3db: 13000 => 12970 MHz freq = 12620 MHz, 3db: 13000 => 12970 MHz freq = 12630 MHz, 3db: 13000 => 12970 MHz freq = 12640 MHz, 3db: 13000 => 12970 MHz freq = 12650 MHz, 3db: 13000 => 12970 MHz freq = 12660 MHz, 3db: 13000 => 12970 MHz freq = 12670 MHz, 3db: 13000 => 12970 MHz freq = 12680 MHz, 3db: 13000 => 12970 MHz freq = 12690 MHz, 3db: 13000 => 12970 MHz freq = 12700 MHz, 3db: 13000 => 12970 MHz freq = 12710 MHz, 3db: 13000 => 12970 MHz freq = 12720 MHz, 3db: 13000 => 12970 MHz freq = 12730 MHz, 3db: 13000 => 12970 MHz freq = 12740 MHz, 3db: 13000 => 12970 MHz freq = 12750 MHz, 3db: 13000 => 12970 MHz freq = 12760 MHz, 3db: 13000 => 12970 MHz freq = 12770 MHz, 3db: 13000 => 12970 MHz freq = 12780 MHz, 3db: 13000 => 12970 MHz freq = 12790 MHz, 3db: 13000 => 12970 MHz freq = 12800 MHz, 3db: 13000 => 12970 MHz freq = 12810 MHz, 3db: 13000 => 12970 MHz freq = 12820 MHz, 3db: 13000 => 12970 MHz freq = 12830 MHz, 3db: 13000 => 12970 MHz freq = 12840 MHz, 3db: 13000 => 12970 MHz freq = 12850 MHz, 3db: 13000 => 12970 MHz freq = 12860 MHz, 3db: 13000 => 12970 MHz freq = 12870 MHz, 3db: 13000 => 12970 MHz freq = 12880 MHz, 3db: 13000 => 12970 MHz freq = 12890 MHz, 3db: 13000 => 12970 MHz freq = 12900 MHz, 3db: 13000 => 12970 MHz freq = 12910 MHz, 3db: 13000 => 12970 MHz freq = 12920 MHz, 3db: 13000 => 12970 MHz freq = 12930 MHz, 3db: 13000 => 12970 MHz freq = 12940 MHz, 3db: 13000 => 12970 MHz freq = 12950 MHz, 3db: 13000 => 12970 MHz freq = 12960 MHz, 3db: 13000 => 12970 MHz freq = 12970 MHz, 3db: 13000 => 12970 MHz freq = 13000 MHz, 3db: 13390 => 13000 MHz freq = 13390 MHz, 3db: 13810 => 13390 MHz freq = 13810 MHz, 3db: 14230 => 13810 MHz freq = 14230 MHz, 3db: 14650 => 14230 MHz freq = 14650 MHz, 3db: 15070 => 14650 MHz freq = 15070 MHz, 3db: 15490 => 15070 MHz freq = 15490 MHz, 3db: 15910 => 15490 MHz freq = 15910 MHz, 3db: 16330 => 15910 MHz freq = 16330 MHz, 3db: 16750 => 16330 MHz freq = 16750 MHz, 3db: 17170 => 16750 MHz freq = 17170 MHz, 3db: 17590 => 17170 MHz freq = 17590 MHz, 3db: 18010 => 17590 MHz freq = 18010 MHz, 3db: 18430 => 18010 MHz freq = 18430 MHz, 3db: 18850 => 18430 MHz freq = 18850 MHz, 3db: bypass => 18850 MHz Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818") Signed-off-by: Sam Winchenbach <swinchenbach@arka.org> Link: https://patch.msgid.link/20250328174831.227202-5-sam.winchenbach@framepointer.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19iio: filter: admv8818: fix integer overflowSam Winchenbach
[ Upstream commit fb6009a28d77edec4eb548b5875dae8c79b88467 ] HZ_PER_MHZ is only unsigned long. This math overflows, leading to incorrect results. Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818") Signed-off-by: Sam Winchenbach <swinchenbach@arka.org> Link: https://patch.msgid.link/20250328174831.227202-4-sam.winchenbach@framepointer.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-19iio: filter: admv8818: fix band 4, state 15Sam Winchenbach
[ Upstream commit ef0ce24f590ac075d5eda11f2d6434b303333ed6 ] Corrects the upper range of LPF Band 4 from 18.5 GHz to 18.85 GHz per the ADMV8818 datasheet Fixes: f34fe888ad05 ("iio:filter:admv8818: add support for ADMV8818") Signed-off-by: Sam Winchenbach <swinchenbach@arka.org> Link: https://patch.msgid.link/20250328174831.227202-3-sam.winchenbach@framepointer.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-29iio: adc: ad7944: don't use storagebits for sizingDavid Lechner
[ Upstream commit 503d20ed8cf7c7b40ec0bd94f53c490c1d91c31b ] Replace use of storagebits with realbits for determining the number of bytes needed for SPI transfers. When adding SPI offload support, storagebits will always be 32 rather than 16 for 16-bit 16-bit chips so we can no longer rely on storagebits being the correct size expected by the SPI framework (it always uses 4 bytes for > 16-bit xfers and 2 bytes for > 8-bit xfers). Instead, derive the correct size from realbits since it will always be correct even when SPI offloading is used. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-vy: Nuno Sa <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-10-e48a489be48c@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22iio: light: opt3001: fix deadlock due to concurrent flag accessLuca Ceresoli
commit f063a28002e3350088b4577c5640882bf4ea17ea upstream. The threaded IRQ function in this driver is reading the flag twice: once to lock a mutex and once to unlock it. Even though the code setting the flag is designed to prevent it, there are subtle cases where the flag could be true at the mutex_lock stage and false at the mutex_unlock stage. This results in the mutex not being unlocked, resulting in a deadlock. Fix it by making the opt3001_irq() code generally more robust, reading the flag into a variable and using the variable value at both stages. Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Cc: stable@vger.kernel.org Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [Fixed conflict while applying on 6.12] Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-22iio: chemical: sps30: use aligned_s64 for timestampDavid Lechner
[ Upstream commit bb49d940344bcb8e2b19e69d7ac86f567887ea9a ] Follow the pattern of other drivers and use aligned_s64 for the timestamp. This will ensure that the timestamp is correctly aligned on all architectures. Fixes: a5bf6fdd19c3 ("iio:chemical:sps30: Fix timestamp alignment") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e22318@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22iio: adc: ad7768-1: Fix insufficient alignment of timestamp.Jonathan Cameron
[ Upstream commit ffbc26bc91c1f1eb3dcf5d8776e74cbae21ee13a ] On architectures where an s64 is not 64-bit aligned, this may result insufficient alignment of the timestamp and the structure being too small. Use aligned_s64 to force the alignment. Fixes: a1caeebab07e ("iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()") # aligned_s64 newer Reported-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-3-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22iio: pressure: mprls0025pa: use aligned_s64 for timestampDavid Lechner
[ Upstream commit ffcd19e9f4cca0c8f9e23e88f968711acefbb37b ] Follow the pattern of other drivers and use aligned_s64 for the timestamp. This will ensure the struct itself it also 8-byte aligned. While touching this, convert struct mpr_chan to an anonymous struct to consolidate the code a bit to make it easier for future readers. Fixes: 713337d9143e ("iio: pressure: Honeywell mprls0025pa pressure sensor") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250418-iio-more-timestamp-alignment-v2-2-d6a5d2b1c9fe@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22iio: chemical: pms7003: use aligned_s64 for timestampDavid Lechner
[ Upstream commit 6ffa698674053e82e811520642db2650d00d2c01 ] Follow the pattern of other drivers and use aligned_s64 for the timestamp. This will ensure that the timestamp is correctly aligned on all architectures. Also move the unaligned.h header while touching this since it was the only one not in alphabetical order. Fixes: 13e945631c2f ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-22iio: adc: ad7266: Fix potential timestamp alignment issue.Jonathan Cameron
[ Upstream commit 52d349884738c346961e153f195f4c7fe186fcf4 ] On architectures where an s64 is only 32-bit aligned insufficient padding would be left between the earlier elements and the timestamp. Use aligned_s64 to enforce the correct placement and ensure the storage is large enough. Fixes: 54e018da3141 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer. Reported-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18iio: adc: dln2: Use aligned_s64 for timestampJonathan Cameron
[ Upstream commit 5097eaae98e53f9ab9d35801c70da819b92ca907 ] Here the lack of marking allows the overall structure to not be sufficiently aligned resulting in misplacement of the timestamp in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to force the alignment on all architectures. Fixes: 7c0299e879dd ("iio: adc: Add support for DLN2 ADC") Reported-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-4-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64Jonathan Cameron
[ Upstream commit 1bb942287e05dc4c304a003ea85e6dd9a5e7db39 ] The IIO ABI requires 64-bit aligned timestamps. In this case insufficient padding would have been added on architectures where an s64 is only 32-bit aligned. Use aligned_s64 to enforce the correct alignment. Fixes: 327a0eaf19d5 ("iio: accel: adxl355: Add triggered buffer support") Reported-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-5-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18iio: temp: maxim-thermocouple: Fix potential lack of DMA safe buffer.Jonathan Cameron
[ Upstream commit f79aeb6c631b57395f37acbfbe59727e355a714c ] The trick of using __aligned(IIO_DMA_MINALIGN) ensures that there is no overlap between buffers used for DMA and those used for driver state storage that are before the marking. It doesn't ensure anything above state variables found after the marking. Hence move this particular bit of state earlier in the structure. Fixes: 10897f34309b ("iio: temp: maxim_thermocouple: Fix alignment for DMA safety") Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250413103443.2420727-14-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18iio: accel: adxl367: fix setting odr for activity time updateLothar Rubusch
[ Upstream commit 38f67d0264929762e54ae5948703a21f841fe706 ] Fix setting the odr value to update activity time based on frequency derrived by recent odr, and not by obsolete odr value. The [small] bug: When _adxl367_set_odr() is called with a new odr value, it first writes the new odr value to the hardware register ADXL367_REG_FILTER_CTL. Second, it calls _adxl367_set_act_time_ms(), which calls adxl367_time_ms_to_samples(). Here st->odr still holds the old odr value. This st->odr member is used to derrive a frequency value, which is applied to update ADXL367_REG_TIME_ACT. Hence, the idea is to update activity time, based on possibilities and power consumption by the current ODR rate. Finally, when the function calls return, again in _adxl367_set_odr() the new ODR is assigned to st->odr. The fix: When setting a new ODR value is set to ADXL367_REG_FILTER_CTL, also ADXL367_REG_TIME_ACT should probably be updated with a frequency based on the recent ODR value and not the old one. Changing the location of the assignment to st->odr fixes this. Fixes: cbab791c5e2a5 ("iio: accel: add ADXL367 driver") Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://patch.msgid.link/20250309193515.2974-1-l.rubusch@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-18iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_tagged_fifoSilvano Seva
commit 8114ef86e2058e2554111b793596f17bee23fa15 upstream. Prevent st_lsm6dsx_read_tagged_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty. Fixes: 801a6e0af0c6 ("iio: imu: st_lsm6dsx: add support to LSM6DSO") Signed-off-by: Silvano Seva <s.seva@4sigma.it> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250311085030.3593-4-s.seva@4sigma.it Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: imu: st_lsm6dsx: fix possible lockup in st_lsm6dsx_read_fifoSilvano Seva
commit 159ca7f18129834b6f4c7eae67de48e96c752fc9 upstream. Prevent st_lsm6dsx_read_fifo from falling in an infinite loop in case pattern_len is equal to zero and the device FIFO is not empty. Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Signed-off-by: Silvano Seva <s.seva@4sigma.it> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250311085030.3593-2-s.seva@4sigma.it Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: imu: inv_mpu6050: align buffer for timestampDavid Lechner
commit 1d2d8524eaffc4d9a116213520d2c650e07c9cc6 upstream. Align the buffer used with iio_push_to_buffers_with_timestamp() to ensure the s64 timestamp is aligned to 8 bytes. Fixes: 0829edc43e0a ("iio: imu: inv_mpu6050: read the full fifo when processing data") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adis16201: Correct inclinometer channel resolutionGabriel Shahrouzi
commit 609bc31eca06c7408e6860d8b46311ebe45c1fef upstream. The inclinometer channels were previously defined with 14 realbits. However, the ADIS16201 datasheet states the resolution for these output channels is 12 bits (Page 14, text description; Page 15, table 7). Correct the realbits value to 12 to accurately reflect the hardware. Fixes: f7fe1d1dd5a5 ("staging: iio: new adis16201 driver") Cc: stable@vger.kernel.org Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://patch.msgid.link/20250421131539.912966-1-gshahrouzi@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adc: rockchip: Fix clock initialization sequenceSimon Xue
commit 839f81de397019f55161c5982d670ac19d836173 upstream. clock_set_rate should be executed after devm_clk_get_enabled. Fixes: 97ad10bb2901 ("iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled") Signed-off-by: Simon Xue <xxm@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20250312062016.137821-1-xxm@rock-chips.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-18iio: adc: ad7606: fix serial register accessAngelo Dureghello
commit f083f8a21cc785ebe3a33f756a3fa3660611f8db upstream. Fix register read/write routine as per datasheet. When reading multiple consecutive registers, only the first one is read properly. This is due to missing chip select deassert and assert again between first and second 16bit transfer, as shown in the datasheet AD7606C-16, rev 0, figure 110. Fixes: f2a22e1e172f ("iio: adc: ad7606: Add support for software mode for ad7616") Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Link: https://patch.msgid.link/20250418-wip-bl-ad7606-fix-reg-access-v3-1-d5eeb440c738@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02iio: adc: ad7768-1: Fix conversion result signSergiu Cuciurean
[ Upstream commit 8236644f5ecb180e80ad92d691c22bc509b747bb ] The ad7768-1 ADC output code is two's complement, meaning that the voltage conversion result is a signed value.. Since the value is a 24 bit one, stored in a 32 bit variable, the sign should be extended in order to get the correct representation. Also the channel description has been updated to signed representation, to match the ADC specifications. Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support") Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Cc: <Stable@vger.kernel.org> Link: https://patch.msgid.link/505994d3b71c2aa38ba714d909a68e021f12124c.1741268122.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02iio: adc: ad7768-1: Move setting of val a bit later to avoid unnecessary ↵Jonathan Cameron
return value check [ Upstream commit 0af1c801a15225304a6328258efbf2bee245c654 ] The data used is all in local variables so there is no advantage in setting *val = ret with the direct mode claim held. Move it later to after error check. Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250217141630.897334-13-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Stable-dep-of: 8236644f5ecb ("iio: adc: ad7768-1: Fix conversion result sign") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10iio: light: Add check for array bounds in veml6075_read_int_time_msKaran Sanghavi
[ Upstream commit ee735aa33db16c1fb5ebccbaf84ad38f5583f3cc ] The array contains only 5 elements, but the index calculated by veml6075_read_int_time_index can range from 0 to 7, which could lead to out-of-bounds access. The check prevents this issue. Coverity Issue CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN) overrun-local: Overrunning array veml6075_it_ms of 5 4-byte elements at element index 7 (byte offset 31) using index int_index (which evaluates to 7) This is hardening against potentially broken hardware. Good to have but not necessary to backport. Fixes: 3b82f43238ae ("iio: light: add VEML6075 UVA and UVB light sensor driver") Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/Z7dnrEpKQdRZ2qFU@Emma Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10iio: adc: ad7768-1: set MOSI idle state to prevent accidental resetJonathan Santos
[ Upstream commit 2416cec859299be04d021b4cf98eff814f345af7 ] Datasheet recommends Setting the MOSI idle state to high in order to prevent accidental reset of the device when SCLK is free running. This happens when the controller clocks out a 1 followed by 63 zeros while the CS is held low. Check if SPI controller supports SPI_MOSI_IDLE_HIGH flag and set it. Fixes: a5f8c7da3dbe ("iio: adc: Add AD7768-1 ADC basic support") Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://patch.msgid.link/c2a2b0f3d54829079763a5511359a1fa80516cfb.1741268122.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-04-10iio: adc: ad7173: Fix comparison of channel configsUwe Kleine-König
[ Upstream commit 7b6033ed5a9e1a369a9cf58018388ae4c5f17e41 ] Checking the binary representation of two structs (of the same type) for equality doesn't have the same semantic as comparing all members for equality. The former might find a difference where the latter doesn't in the presence of padding or when ambiguous types like float or bool are involved. (Floats typically have different representations for single values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has at least 8 bits and the raw values 1 and 2 (probably) both evaluate to true, but memcmp finds a difference.) When searching for a channel that already has the configuration we need, the comparison by member is the one that is needed. Convert the comparison accordingly to compare the members one after another. Also add a static_assert guard to (somewhat) ensure that when struct ad7173_channel_config::config_props is expanded, the comparison is adapted, too. This issue is somewhat theoretic, but using memcmp() on a struct is a bad pattern that is worth fixing. Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20250303114659.1672695-14-u.kleine-koenig@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 03:28:20 +0000