| Age | Commit message (Collapse) | Author |
|---|
|
Older firmwares still send sensor configuration using a list of
registers with opaque values defined during sensor tuning.
sx9234 and sx9360 sensor on ACPI based devices are concerned.
More schema to configure the sensors will be needed to support devices
designed for windows, like Samsung Galaxy Book2.
Support schema is: "<_HID>.<register_name>". For instance
"STH9324,reg_adv_ctrl2" in:
Scope (\_SB.PCI0.I2C2)
{
Device (SX28)
{
Name (_HID, "STH9324") // _HID: Hardware ID
...
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /*
Device Properties for _DSD */,
Package (0x3F)
{
...
Package (0x02)
{
"STH9324,reg_adv_ctrl2",
Zero
},`
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230211002421.3447060-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This driver only turns the power for some regulators on at probe and off
via a custom devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces all this boilerplate code.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-13-jic23@kernel.org
|
|
IIO core correctly will take care of firmware node if it's not set in
the driver. Drop ACPI and OF specifics from the driver and allow IIO
core to handle this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220615114746.2767-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
It's not correct to use artificial device created by IIO core to
retrieve device properties. Even ->get_default_reg() callback
takes a simple struct device pointer which suggests it wants to
operate on the real device.
Correct this by replacing pointer to IIO device by a real device
pointer in the caller of ->get_default_reg().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220615114746.2767-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
After commit 7a3605bef878 ("iio: sx9310: Support ACPI property") we
started using the 'indio_dev->dev' to extract device properties for
various register settings in sx9310_get_default_reg(). This broke DT
based systems because dev_fwnode() used in the device_property*() APIs
can't find an 'of_node'. That's because the 'indio_dev->dev.of_node'
pointer isn't set until iio_device_register() is called. Set the pointer
earlier, next to where the ACPI companion is set, so that the device
property APIs work on DT systems.
Cc: Gwendal Grignou <gwendal@chromium.org>
Fixes: 7a3605bef878 ("iio: sx9310: Support ACPI property")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220331210425.3908278-1-swboyd@chromium.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
To convert SX9360 status register ["REG_STAT"], into a channel
index, we need to right shift by |stat_offset|, not left shift.
Also the PROXSTAT bit (3) is for channel 1 (PHM, Phase Measured), not (PHR,
Phase Reference, channel 0), so the offset is 2 instead of 3.
Fixes: 1cdb4c47f7f5 ("iio:proximity:sx9360: Add sx9360 support")
Signed-off-by: Jongpil Jung <jongpil19.jung@samsung.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220122213444.745152-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Before adding new Semtech sensors, move common logic to all Semtech SAR
sensor in its own file:
- interface with IIO subsystem,
- interrupt management,
- channel access conrol,
- event processing.
The change adds a bidirectional interface between sx93xx and sx_common.
The change is quite mechanical, as the impacted functions are moved
and renamed.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203817.290512-3-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
