| Age | Commit message (Collapse) | Author |
|---|
|
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
144 2 root DW 0 0% 33% [ina226:1-8800us]
141 2 root DW 0 0% 25% [ina226:0-8800us]
40 2 root SW 0 0% 15% [irq/156-4802a00]
147 2 root DW 0 0% 7% [ina226:2-8800us]
145 1 root S 1236 0% 6% dd if /dev/iio:device1 of /dev/null
148 1 root S 1236 0% 4% dd if /dev/iio:device2 of /dev/null
149 137 root R 1244 0% 3% top -d 1
142 1 root S 1236 0% 2% dd if /dev/iio:device0 of /dev/null
Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Different probe modules use different resistor values. The front-end
application may read a probe ID (from eeprom) and set the shunt value
accordingly.
Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This can lead to repeated or skipped samples depending on the clock beat
between the capture thread and the chip sampling clock, but will also spare
reading/waiting for the Capture Ready Flag and improve the available i2c
bandwidth for reading measurements.
Output of iio_info:
...snip...
4 device-specific attributes found:
attr 0: in_oversampling_ratio value: 4
attr 1: in_allow_async_readout value: 0
attr 2: integration_time_available value: 140 204 332 588 1100 2116...
attr 3: in_sampling_frequency value: 114
Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
in SOFTWARE buffer mode, a kthread will capture the active scan_elements
into a kfifo, then compute the remaining time until the next capture tick
and do an active wait (udelay).
This will produce a stream of up to fours channels plus a 64bits
timestamps (ns).
Tested with ina226, on BeagleBoneBlack.
Datasheet: http://www.ti.com/lit/gpn/ina226
Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
