Age | Commit message (Collapse) | Author |
|
[ Upstream commit 7b6033ed5a9e1a369a9cf58018388ae4c5f17e41 ]
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad7173_channel_config::config_props is expanded, the comparison
is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250303114659.1672695-14-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 36a44e05cd807a54e5ffad4b96d0d67f68ad8576 upstream.
Fix a possible race condition during driver probe in the ad7173 driver
due to using a shared static info struct. If more that one instance of
the driver is probed at the same time, some of the info could be
overwritten by the other instance, leading to incorrect operation.
To fix this, make the static info struct const so that it is read-only
and make a copy of the info struct for each instance of the driver that
can be modified.
Reported-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Tested-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patch.msgid.link/20241127-iio-adc-ad7313-fix-non-const-info-struct-v2-1-b6d7022b7466@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Models AD4114/5/6 have .higher_gpio_bits = true. This is not correct as
the only models that have the GPIO bits to a higher position are AD4111/2.
Fix by removing the higher_gpio_bits = true from the AD4114/5/6 models.
Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://patch.msgid.link/20240809134909.26829-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Wrong compatible strings are used for AD411x devices.
Fix by adding the missing "adi," prefix.
Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240723111322.324947-1-dumitru.ceclan@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move the definition down and make it a boolean that is initialized
to false.
Fixes: 13d12e3ad12d ("iio: adc: ad7173: Add support for AD411x devices")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406232046.DKfBJq6o-lkp@intel.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for AD4111/AD4112/AD4114/AD4115/AD4116.
The AD411X family encompasses a series of low power, low noise, 24-bit,
sigma-delta analog-to-digital converters that offer a versatile range of
specifications.
This family of ADCs integrates an analog front end suitable for processing
both fully differential and single-ended, bipolar voltage inputs
addressing a wide array of industrial and instrumentation requirements.
- All ADCs have inputs with a precision voltage divider with a division
ratio of 10.
- AD4116 has 5 low level inputs without a voltage divider.
- AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm
shunt resistor.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-9-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADCs supported by this driver feature a sequencer that read in a
loop all the enabled chanels. When setting the individual sampling
frequency for each channel and enabling multiple channels, the effective
of each channel will be lower than the actual set value. Document this
behaviour in a comment.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-8-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Drop setting .has_temp and .has_input_buf to false in device info struct.
Drop array of device info structs and use individual structs for all;
drop models enum as no longer needed. This improves readability as the
structs are pointed directly.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-7-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for selecting REF+ and REF- inputs on all models.
Add support for selecting ((AVDD1 − AVSS)/5) inputs
on supported models.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-6-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move validation of analog inputs and reference voltage selection to
separate functions to reduce the size of the channel config parsing
function and improve readability.
Add defines for the number of analog inputs in a channel.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-5-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move configurations regarding number of channels from
*_fw_parse_device_config to *_fw_parse_channel_config.
Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/all/20240303162148.3ad91aa2@jic23-huawei/
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-4-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Sigma delta ADCs with a sequencer need to disable the previously enabled
channel when reading using ad_sigma_delta_single_conversion(). This was
done manually in drivers for devices with sequencers.
This patch implements handling of single channel disabling after a
single conversion.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-3-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This patch fixes two issues regarding the sampling frequency setting:
-The attribute was set as per device, not per channel. As such, when
setting the sampling frequency, the configuration was always done for
the slot 0, and the correct configuration was applied on the next
channel configuration call by the LRU mechanism.
-The LRU implementation does not take into account external settings of
the slot registers. When setting the sampling frequency directly to a
slot register in write_raw(), there is no guarantee that other channels
were not also using that slot and now incorrectly retain their config
as live.
Set the sampling frequency attribute as separate in the channel templates.
Do not set the sampling directly to the slot register in write_raw(),
just mark the config as not live and let the LRU mechanism handle it.
As the reg variable is no longer used, remove it.
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-5-b85f33079e18@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The previous value of the append status bit was not cleared before
setting the new value. This caused the bit to remain set after enabling
buffered mode for multiple channels and not permit further buffered
reads from a single channel after the fact.
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240530-ad7173-fixes-v3-4-b85f33079e18@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Temperature channel is unique per device, index is not needed.
This is breaking userspace: Include fixes tag to be released within the
same rc cycle.
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-3-8161cc7f3ad1@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add missing names from the device info struct for 3 models to ensure
consistency with the rest of the models.
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-2-8161cc7f3ad1@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
AD7176-2 does not feature input buffers and marks corespondent register
bits as read only. Enable buffers only on supported models.
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://lore.kernel.org/r/20240521-ad7173-fixes-v1-1-8161cc7f3ad1@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This was obviously supposed to be a bitwise negate instead of logical.
Fixes: 76a1e6a42802 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/5401c681-c4aa-4fab-8c8c-8f0a379e2687@moroto.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
paths.
This loop definition automatically releases the fwnode_handle on early
exit such as the error cases seen here. This reducing boilerplate and
the chance of a resource leak being introduced in future.
Cc: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240330190849.1321065-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for Analog Devices AD7172-2, AD7175-8, AD7177-2.
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240306110956.13167-4-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Rename to AD7172_2_ID to avoid confusion with _4 model.
Reorder id's by reg value.
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240306110956.13167-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel
applications or higher speed multiplexed applications. The Sigma-Delta
ADC is intended primarily for measurement of signals close to DC but also
delivers outstanding performance with input bandwidths out to ~10kHz.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240228110622.25114-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|