| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit a4e65842e1142aa18ef36113fbd81d614eaefe5a ]
The use of the whole register and == could break the claim mechanism if
any of the other bits are used in the future. The referenced doc "PSCI -
ARM DEN 0022D" also says to only read and clear the bottom two bits.
Use FIELD_GET() to extract only the relevant part.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250325-james-coresight-claim-tags-v4-2-dfbd3822b2e5@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 408c97c4a5e0b634dcd15bf8b8808b382e888164 ]
While enable active config via cscfg_csdev_enable_active_config(),
active config could be deactivated via configfs' sysfs interface.
This could make UAF issue in below scenario:
CPU0 CPU1
(sysfs enable) load module
cscfg_load_config_sets()
activate config. // sysfs
(sys_active_cnt == 1)
...
cscfg_csdev_enable_active_config()
lock(csdev->cscfg_csdev_lock)
// here load config activate by CPU1
unlock(csdev->cscfg_csdev_lock)
deactivate config // sysfs
(sys_activec_cnt == 0)
cscfg_unload_config_sets()
unload module
// access to config_desc which freed
// while unloading module.
cscfg_csdev_enable_config
To address this, use cscfg_config_desc's active_cnt as a reference count
which will be holded when
- activate the config.
- enable the activated config.
and put the module reference when config_active_cnt == 0.
Fixes: f8cce2ff3c04 ("coresight: syscfg: Add API to activate and enable configurations")
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250514161951.3427590-4-yeoreum.yun@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a03a0a08c6fe5e50c1b12ea41b9e228e7f649c22 ]
When tracing ETM data on multiple CPUs concurrently via the
perf interface, the CATU device is shared across different CPU
paths. This can lead to race conditions when multiple CPUs attempt
to enable or disable the CATU device simultaneously.
To address these race conditions, this patch introduces the
following changes:
1. The enable and disable operations for the CATU device are not
reentrant. Therefore, a spinlock is added to ensure that only
one CPU can enable or disable a given CATU device at any point
in time.
2. A reference counter is used to manage the enable/disable state
of the CATU device. The device is enabled when the first CPU
requires it and is only disabled when the last CPU finishes
using it. This ensures the device remains active as long as at
least one CPU needs it.
Fixes: fcacb5c154ba ("coresight: Introduce support for Coresight Address Translation Unit")
Signed-off-by: Yabin Cui <yabinc@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250429231301.1952246-2-yabinc@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
coresight_init_driver()
[ Upstream commit 9f52aecc952ddf307571517d5c91136c8c4e87c9 ]
The coresight_init_driver() of the coresight-core module is called from
the sub coresgiht device (such as tmc/stm/funnle/...) module. It calls
amba_driver_register() and Platform_driver_register(), which are macro
functions that use the coresight-core's module to initialize the caller's
owner field. Therefore, when the sub coresight device calls
coresight_init_driver(), an incorrect THIS_MODULE value is captured.
The sub coesgiht modules can be removed while their callbacks are
running, resulting in a general protection failure.
Add module parameter to coresight_init_driver() so can be called
with the module of the callback.
Fixes: 075b7cd7ad7d ("coresight: Add helpers registering/removing both AMBA and platform drivers")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240918035327.9710-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b80c0abe475ed1017c5e862636049aa1cc17a1a ]
In coresight-etb10 drivers, etb_drvdata->spinlock can be held
during __schedule() by perf_event_task_sched_out()/in().
Since etb_drvdata->spinlock type is spinlock_t and
perf_event_task_sched_out()/in() is called after acquiring rq_lock,
which is raw_spinlock_t (an unsleepable lock),
this poses an issue in PREEMPT_RT kernel where spinlock_t is sleepable.
To address this, change type etb_drvdata->spinlock in coresight-etb10 drivers,
which can be called by perf_event_task_sched_out()/in(),
from spinlock_t to raw_spinlock_t.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250306121110.1647948-6-yeoreum.yun@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e553520596bbd5ce832e26e9d721e6a0c797b8b ]
The struct page->mapping, index fields are deprecated and soon to be only
available as part of a folio.
It is likely the intel_th code which sets page->mapping, index is was
implemented out of concern that some aspect of the page fault logic may
encounter unexpected problems should they not.
However, the appropriate interface for inserting kernel-allocated memory is
vm_insert_page() in a VM_MIXEDMAP. By using the helper function
vmf_insert_mixed() we can do this with minimal churn in the existing fault
handler.
By doing so, we bypass the remainder of the faulting logic. The pages are
still pinned so there is no possibility of anything unexpected being done
with the pages once established.
It would also be reasonable to pre-map everything on fault, however to
minimise churn we retain the fault handler.
We also eliminate all code which clears page->mapping on teardown as this
has now become unnecessary.
The MSU code relies on faulting to function correctly, so is by definition
dependent on CONFIG_MMU. We avoid spurious reports about compilation
failure for unsupported platforms by making this requirement explicit in
Kconfig as part of this change too.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250331125608.60300-1-lorenzo.stoakes@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ff6039ffb79a4a8a44b63810a8a2f2b43264856 ]
As recommended by section 4.3.7 ("Synchronization when using system
instructions to progrom the trace unit") of ARM IHI 0064H.b, the
self-hosted trace analyzer must perform a Context synchronization
event between writing to the TRCPRGCTLR and reading the TRCSTATR.
Additionally, add an ISB between the each read of TRCSTATR on
coresight_timeout() when using system instructions to program the
trace unit.
Fixes: 1ab3bb9df5e3 ("coresight: etm4x: Add necessary synchronization for sysreg access")
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250116-etm_sync-v4-1-39f2b05e9514@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e14e062f5ff98aa15264dfa87c5f5e924028561 ]
Trying to record a trace on kernel with 64k pages resulted in -ENOMEM.
This happens due to a bug in calculating the number of table pages, which
returns zero. Fix the issue by rounding up.
$ perf record --kcore -e cs_etm/@tmc_etr55,cycacc,branch_broadcast/k --per-thread taskset --cpu-list 1 dd if=/dev/zero of=/dev/null
failed to mmap with 12 (Cannot allocate memory)
Fixes: 8ed536b1e283 ("coresight: catu: Add support for scatter gather tables")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250109215348.5483-1-ilkka@os.amperecomputing.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 49114ff05770264ae233f50023fc64a719a9dcf9 upstream.
Add support for the Trace Hub in Panther Lake-P/U.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250211185017.1759193-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a70034d6c0d5f3cdee40bb00a578e17fd2ebe426 upstream.
Add support for the Trace Hub in Panther Lake-H.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250211185017.1759193-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5edccae9f447a92d475267d94c33f4926963eec upstream.
Add support for the Trace Hub in Arrow Lake.
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20250211185017.1759193-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reduce contention on the lock by replacing the global lock with one for
each map.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-18-james.clark@linaro.org
|
|
For Perf to be able to decode when per-sink trace IDs are used, emit the
sink that's being written to for each ETM.
Perf currently errors out if it sees a newer packet version so instead
of bumping it, add a new minor version field. This can be used to
signify new versions that have backwards compatible fields. Considering
this change is only for high core count machines, it doesn't make sense
to make a breaking change for everyone.
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-17-james.clark@linaro.org
|
|
Pending the release of IDs was a way of managing concurrent sysfs and
Perf sessions in a single global ID map. Perf may have finished while
sysfs hadn't, and Perf shouldn't release the IDs in use by sysfs and
vice versa.
Now that Perf uses its own exclusive ID maps, pending release doesn't
result in any different behavior than just releasing all IDs when the
last Perf session finishes. As part of the per-sink trace ID change, we
would have still had to make the pending mechanism work on a per-sink
basis, due to the overlapping ID allocations, so instead of making that
more complicated, just remove it.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-16-james.clark@linaro.org
|
|
This will allow sessions with more than CORESIGHT_TRACE_IDS_MAX ETMs
as long as there are fewer than that many ETMs connected to each sink.
Each sink owns its own trace ID map, and any Perf session connecting to
that sink will allocate from it, even if the sink is currently in use by
other users. This is similar to the existing behavior where the dynamic
trace IDs are constant as long as there is any concurrent Perf session
active. It's not completely optimal because slightly more IDs will be
used than necessary, but the optimal solution involves tracking the PIDs
of each session and allocating ID maps based on the session owner. This
is difficult to do with the combination of per-thread and per-cpu modes
and some scheduling issues. The complexity of this isn't likely to worth
it because even with multiple users they'd just see a difference in the
ordering of ID allocations rather than hitting any limits (unless the
hardware does have too many ETMs connected to one sink).
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-15-james.clark@linaro.org
|
|
The global CPU ID mappings won't work for per-sink ID maps so move it to
the ID map struct. coresight_trace_id_release_all_pending() is hard
coded to operate on the default map, but once Perf sessions use their
own maps the pending release mechanism will be deleted. So it doesn't
need to be extended to accept a trace ID map argument at this point.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-14-james.clark@linaro.org
|
|
The trace ID API is currently hard coded to always use the global map.
Add public versions that allow the map to be passed in so that Perf
mode can use per-sink maps. Keep the non-map versions so that sysfs
mode can continue to use the default global map.
System ID functions are unchanged because they will always use the
default map.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-13-james.clark@linaro.org
|
|
The trace ID maps will need to be created and stored by the core and
Perf code so move the definition up to the common header.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-12-james.clark@linaro.org
|
|
"Process being monitored" and "pid of the process to monitor" imply that
this would be the same PID if there were two sessions targeting the same
process. But this is actually the PID of the process that did the Perf
event open call, rather than the target of the session. So update the
comments to make this clearer.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-11-james.clark@linaro.org
|
|
This file is never included anywhere if CONFIG_CORESIGHT is not set so
they are unused and aren't currently compile tested with any config so
remove them.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240722101202.26915-10-james.clark@linaro.org
|
|
Running perf with cs_etm on Juno triggers the following kmemleak warning !
:~# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffff8806b6d720 (size 96):
comm "perf", pid 562, jiffies 4297810960
hex dump (first 32 bytes):
38 d8 13 07 88 ff ff ff 00 d0 9e 85 c0 ff ff ff 8...............
00 10 00 88 c0 ff ff ff 00 f0 ff f7 ff 00 00 00 ................
backtrace (crc 1dbf6e00):
[<ffffffc08107381c>] kmemleak_alloc+0xbc/0xd8
[<ffffffc0802f9798>] kmalloc_trace_noprof+0x220/0x2e8
[<ffffffc07bb71948>] tmc_alloc_sg_table+0x48/0x208 [coresight_tmc]
[<ffffffc07bb71cbc>] tmc_etr_alloc_sg_buf+0xac/0x240 [coresight_tmc]
[<ffffffc07bb72538>] tmc_alloc_etr_buf.constprop.0+0x1f0/0x260 [coresight_tmc]
[<ffffffc07bb7280c>] alloc_etr_buf.constprop.0.isra.0+0x74/0xa8 [coresight_tmc]
[<ffffffc07bb72950>] tmc_alloc_etr_buffer+0x110/0x260 [coresight_tmc]
[<ffffffc07bb38afc>] etm_setup_aux+0x204/0x3b0 [coresight]
[<ffffffc08025837c>] rb_alloc_aux+0x20c/0x318
[<ffffffc08024dd84>] perf_mmap+0x2e4/0x7a0
[<ffffffc0802cceb0>] mmap_region+0x3b0/0xa08
[<ffffffc0802cd8a8>] do_mmap+0x3a0/0x500
[<ffffffc080295328>] vm_mmap_pgoff+0x100/0x1d0
[<ffffffc0802cadf8>] ksys_mmap_pgoff+0xb8/0x110
[<ffffffc080020688>] __arm64_sys_mmap+0x38/0x58
[<ffffffc080028fc0>] invoke_syscall.constprop.0+0x58/0x100
This due to the fact that we do not free the "sg_table" itself while
freeing up the SG table and data pages. Fix this by freeing the sg_table
in tmc_free_sg_table().
Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework")
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240702132846.1677261-1-suzuki.poulose@arm.com
|
|
The coresight_disable_source_sysfs function should verify the
mode of the coresight device before disabling the source.
However, the mode for the dummy source device is always set to
CS_MODE_DISABLED, resulting in the check consistently failing.
As a result, dummy source cannot be properly disabled.
Configure CS_MODE_SYSFS/CS_MODE_PERF during the enablement.
Configure CS_MODE_DISABLED during the disablement.
Fixes: 9d3ba0b6c056 ("Coresight: Add coresight dummy driver")
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240812042844.2890115-1-quic_jiegan@quicinc.com
|
|
The coresight_disable_source_sysfs function should verify the
mode of the coresight device before disabling the source.
However, the mode for the TPDM device is always set to
CS_MODE_DISABLED, resulting in the check consistently failing.
As a result, TPDM cannot be properly disabled.
Configure CS_MODE_SYSFS/CS_MODE_PERF during the enablement.
Configure CS_MODE_DISABLED during the disablement.
Fixes: b3c71626a933 ("Coresight: Add coresight TPDM source driver")
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240812043043.2890694-1-quic_jiegan@quicinc.com
|
|
Drop the manual access to the fwnode of the device to iterate over its
child nodes. `device_for_each_child_node` macro provides direct access
to the child nodes, and given that they are only required within the
loop, the scoped variant of the macro can be used.
Use the `device_for_each_child_node_scoped` macro to iterate over the
direct child nodes of the device.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240808-device_child_node_access-v2-1-fc757cc76650@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwtracing/intel_th/intel_th_msu_sink.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240530-md-intel_th_msu_sink-v1-1-ae796336e7b9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/878qyl970c.wl-kuninori.morimoto.gx@renesas.com
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
coresight_dev_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240219-device_cleanup-coresight-v1-1-4a8a0b816183@marliere.net
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
The header files linux/acpi.h is included twice in coresight-tmc-core.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8937
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240506011121.39179-1-yang.lee@linux.alibaba.com
|
|
of_graph_get_next_endpoint() releases the reference to the previous
endpoint on each iteration, but when parsing fails the loop exits
early meaning the last reference is never dropped.
Fix it by dropping the refcount in the exit condition.
Fixes: d375b356e687 ("coresight: Fix support for sparsely populated ports")
Signed-off-by: James Clark <james.clark@arm.com>
Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240529133626.90080-1-james.clark@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
Add support for the Trace Hub in Lunar Lake.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-16-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Meteor Lake-S CPU.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-15-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Meteor Lake-S.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-14-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Sapphire Rapids SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-13-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Granite Rapids SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-12-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Granite Rapids.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20240429130119.1518073-11-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct function comments to prevent kernel-doc warnings
found when using "W=1".
msu.c:77: warning: Function parameter or member 'msc' not described in 'msc_window'
msu.c:122: warning: bad line:
msu.c:760: warning: No description found for return value of 'msc_configure'
msu.c:1309: warning: Function parameter or member 'nr_pages' not described in 'msc_buffer_alloc'
msu.c:1309: warning: Function parameter or member 'nr_wins' not described in 'msc_buffer_alloc'
msu.c:1309: warning: Excess function parameter 'size' description in 'msc_buffer_alloc'
msu.c:1376: warning: No description found for return value of 'msc_buffer_free_unless_used'
msu.c:1444: warning: No description found for return value of 'msc_win_to_user'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-10-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pointer outp is being initialized with a value that is never
read. All the reads of outp occur after outp has neen set to an
appropriate value rather than using the first value is initialized
with. The assignment is redundant and can be removed.
Cleans up clang scan warning:
drivers/hwtracing/intel_th/sth.c:73:15: warning: Value stored to
'outp' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-9-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() will be converted as weel if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-8-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
intel_th_source_device_type, intel_th_output_device_type,
intel_th_switch_device_type and intel_th_device_type variables to be
constant structures as well, placing it into read-only memory which can not
be modified at runtime.
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Package messages from ftrace source with SyS-T Structured Binary Data
(later SBD) header and 64-bit ID. This provides modification-free
compatibility between ftrace and SyS-T arguments structure by applying
0xFFFF mask on message ID.
This happens due to the fact that SBD and ftrace structures have the
same principle of data storage: <header><args binary blob>.
The headers are bit-to-bit compatible and both contain event/catalog ID
with the exception, that ftrace header contains more fields within 64
bits which needs to be masked during encoding process, since SBD
standard doesn't support mask of ID field.
0 15 16 23 24 31 32 39 40 63
ftrace: <event_id> <flags> <preempt> <-pid-> <---->
SBD: <------- msg_id ------------------------------>
Signed-off-by: Mikhail Lappo <miklelappo@gmail.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pass stm source type via stm_write() to allow different handling on
protocol level.
The measure above should allow protocol level encoder to differentiate
and accordingly pack the messages. As an example SyS-T might get use of
ftrace message ID's and instead of applying regular header, pack them
as SyS-T catalog or SyS-T Structured Binary Data message to allow proper
decoding on the other side.
Signed-off-by: Mikhail Lappo <miklelappo@gmail.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently kernel HW tracing infrastrtucture and specifically its SyS-T
part treats all source data in the same way. Treating and encoding
different trace data sources differently might allow decoding software
to make use of e.g. ftrace event ids by converting them to a SyS-T
message catalog.
The solution is to keep source type stored within stm_source_data
structure to allow different handling by stm output/protocol.
Currently we only differentiate between STM_USER and STM_FTRACE sources.
Signed-off-by: Mikhail Lappo <miklelappo@gmail.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The put_device(&stm->dev) call will trigger stm_device_release() which
frees "stm" so the vfree(stm) on the next line is a double free.
Fixes: 389b6699a2aa ("stm class: Fix stm device initialization order")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20240429130119.1518073-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
