| Age | Commit message (Collapse) | Author |
|---|
|
The power trip points maintained in local should not be updated when '_PTP'
method fails to evaluate.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250109081708.27366-3-lihuisong@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The 'power1_alarm' attribute uses the 'power' and 'cap' in the
acpi_power_meter_resource structure. Currently, these two fields are just
updated when user query 'power' and 'cap' attribute. If user directly query
the 'power1_alarm' attribute without queryng above two attributes, driver
will use uninitialized variables to judge.
So this patch adds the setting of alarm state and update 'cap' in the
notification callback and update 'power' and 'cap' if needed to show the
real alarm state.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250109081708.27366-2-lihuisong@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_hwmon_device_register_with_info
A number of network PHY drivers use the following code:
name = devm_hwmon_sanitize_name(dev, dev_name(dev));
if (IS_ERR(name))
return PTR_ERR(name);
devm_hwmon_device_register_with_info(dev, name, ..);
Make this a generic fallback option and use the device name if no name
is provided to devm_hwmon_device_register_with_info(). This would allow
to simplify the affected drivers.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/1ebe6961-6445-4408-bfb4-b56173af9db5@gmail.com
[groeck: Update API document]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MAX15303 is a full-featured, flexible, efficient, 6A digital
point-of-load (PoL) controller with integrated switching MOSFETs. It
contains advanced power management and telemetry features.
Tested-by: Robin Getz <rgetz503@gmail.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250108-dev-max15303-v1-1-9154eb2c9d9e@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
SMN access was bolted into amd_nb mostly as convenience. This has
limitations though that require incurring tech debt to keep it working.
Move SMN access to the newly introduced AMD Node driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> # pdx86
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # PMF, PMC
Link: https://lore.kernel.org/r/20241206161210.163701-11-yazen.ghannam@amd.com
|
|
amd_pci_dev_to_node_id() tries to find the AMD node ID of a device by
searching and counting devices.
The AMD node ID of an AMD node device is simply its slot number minus
the AMD node 0 slot number.
Simplify this function and move it to k10temp.c.
[ Yazen: Update commit message and simplify function. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241206161210.163701-10-yazen.ghannam@amd.com
|
|
scsi_execute_cmd() function can return both negative (linux codes) and
positive (scsi_cmnd result field) error codes.
Currently the driver just passes error codes of scsi_execute_cmd() to
hwmon core, which is incorrect because hwmon only checks for negative
error codes. This leads to hwmon reporting uninitialized data to
userspace in case of SCSI errors (for example if the disk drive was
disconnected).
This patch checks scsi_execute_cmd() output and returns -EIO if it's
error code is positive.
Fixes: 5b46903d8bf37 ("hwmon: Driver for disk and solid state drives with temperature sensors")
Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net
[groeck: Avoid inline variable declaration for portability]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for adm1273 which is similar to adm1275 and other chips
of the series.
Signed-off-by: John Erasmus Mari Geronimo <johnerasmusmari.geronimo@analog.com>
Link: https://lore.kernel.org/r/20250106131740.305988-3-johnerasmusmari.geronimo@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The new customer ID was found on a MPG X870E CARBON WIFI (MS-7E49) with
a NCT6687D chip.
Signed-off-by: John Audia <therealgraysky@proton.me>
[groeck: Resolved conflicts in Documentation/hwmon/nct6683.rst]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Commit 255ab27a0743 ("hwmon: (pwm-fan) Introduce start from stopped state
handling") added two of_property_read_u32() calls after the driver was
reworked to use device_property_* in commit dfd977d85b15 ("hwmon: (pwm-fan)
Make use of device properties"), so convert those as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250102170429.791912-1-peter@korsgaard.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Constify the following API:
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
To :
struct device *device_find_child(struct device *dev, const void *data,
device_match_t match);
typedef int (*device_match_t)(struct device *dev, const void *data);
with the following reasons:
- Protect caller's match data @*data which is for comparison and lookup
and the API does not actually need to modify @*data.
- Make the API's parameters (@match)() and @data have the same type as
all of other device finding APIs (bus|class|driver)_find_device().
- All kinds of existing device match functions can be directly taken
as the API's argument, they were exported by driver core.
Constify the API and adapt for various existing usages.
BTW, various subsystem changes are squashed into this commit to meet
'git bisect' requirement, and this commit has the minimal and simplest
changes to complement squashing shortcoming, and that may bring extra
code improvement.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for drivers/pwm
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-4-6623037414d4@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce I3C support by defining I3C accessors for regmap and
implementing an I3C driver. Enable I3C for the NXP P3T1755.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241220093635.11218-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Put generic probe functionality into a separate function and let the I2C
driver call it. This is a preparation for adding I3C support which will
also use the generic probe function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241219225522.3490-11-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The regmap-only conversion allows us to store the client-pointer as the
'context' parameter for regmap. This not only makes the private struct
smaller, but also allows proper separation of I2C and I3C in the future.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241219225522.3490-10-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_regulator_get_enable() was introduced exactly to avoid open coding
regulator handling like in this driver. Make use of this helper.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219225522.3490-9-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
After previous refactoring, it is now possible to make
lm75_write_config() a simple inline function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219225522.3490-8-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Hide register size differences in regmap access functions to simplify
runtime code and to simplify adding support for I3C devices. Also
use regmap API functions for bit operations where possible.
For this to work, the 16-bit and 8-bit configuration register has to be
mapped to a 16-bit value. Unlike other registers, this register is a
low-byte-first register, presumably for compatibility with chips with
8-bit wide configuration registers. Hide the differences in the regmap
access code.
While at it, enable alarm attribute support for TMP112.
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the driver to monitor Intel common redundant power supply (crps185)
with hwmon over pmbus.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20241217173537.192331-3-ninad@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add this LM75 compatible sensor which needs a separate entry because of
its default sampling time and SMBusAlert handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241218074131.4351-7-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The MCU can be found on network-attached-storage devices made by QNAP
and provides access to fan control including reading back its RPM as
well as reading the temperature of the NAS case.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241107114712.538976-8-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Registers
The values returned by the driver after processing the contents of the
Temperature Result and the Temperature Limit Registers do not correspond to
the TMP512/TMP513 specifications. A raw register value is converted to a
signed integer value by a sign extension in accordance with the algorithm
provided in the specification, but due to the off-by-one error in the sign
bit index, the result is incorrect.
According to the TMP512 and TMP513 datasheets, the Temperature Result (08h
to 0Bh) and Limit (11h to 14h) Registers are 13-bit two's complement
integer values, shifted left by 3 bits. The value is scaled by 0.0625
degrees Celsius per bit. E.g., if regval = 1 1110 0111 0000 000, the
output should be -25 degrees, but the driver will return +487 degrees.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://lore.kernel.org/r/20241216173648.526-4-m.masimov@maxima.ru
[groeck: fixed description line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The value returned by the driver after processing the contents of the
Current Register does not correspond to the TMP512/TMP513 specifications.
A raw register value is converted to a signed integer value by a sign
extension in accordance with the algorithm provided in the specification,
but due to the off-by-one error in the sign bit index, the result is
incorrect. Moreover, negative values will be reported as large positive
due to missing sign extension from u32 to long.
According to the TMP512 and TMP513 datasheets, the Current Register (07h)
is a 16-bit two's complement integer value. E.g., if regval = 1000 0011
0000 0000, then the value must be (-32000 * lsb), but the driver will
return (33536 * lsb).
Fix off-by-one bug, and also cast data->curr_lsb_ua (which is of type u32)
to long to prevent incorrect cast for negative values.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://lore.kernel.org/r/20241216173648.526-3-m.masimov@maxima.ru
[groeck: Fixed description line length]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Registers
The values returned by the driver after processing the contents of the
Shunt Voltage Register and the Shunt Limit Registers do not correspond to
the TMP512/TMP513 specifications. A raw register value is converted to a
signed integer value by a sign extension in accordance with the algorithm
provided in the specification, but due to the off-by-one error in the sign
bit index, the result is incorrect. Moreover, the PGA shift calculated with
the tmp51x_get_pga_shift function is relevant only to the Shunt Voltage
Register, but is also applied to the Shunt Limit Registers.
According to the TMP512 and TMP513 datasheets, the Shunt Voltage Register
(04h) is 13 to 16 bit two's complement integer value, depending on the PGA
setting. The Shunt Positive (0Ch) and Negative (0Dh) Limit Registers are
16-bit two's complement integer values. Below are some examples:
* Shunt Voltage Register
If PGA = 8, and regval = 1000 0011 0000 0000, then the decimal value must
be -32000, but the value calculated by the driver will be 33536.
* Shunt Limit Register
If regval = 1000 0011 0000 0000, then the decimal value must be -32000, but
the value calculated by the driver will be 768, if PGA = 1.
Fix sign bit index, and also correct misleading comment describing the
tmp51x_get_pga_shift function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Link: https://lore.kernel.org/r/20241216173648.526-2-m.masimov@maxima.ru
[groeck: Fixed description and multi-line alignments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add debugfs file for the PMBUS_REVISION command. This command provides
information about PMBus protocol revision number.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216175044.4144442-2-ninad@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241215-sysfs-const-bin_attr-hwmon-v1-1-ea72a6a46c36@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This value was found on an ASRock B650 Steel Legend WiFi with an
NCT6686D chip.
Signed-off-by: Max Ammann <max@maxammann.org>
Link: https://lore.kernel.org/r/20241214102201.122851-1-max@maxammann.org
[groeck: htmldocs fix]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
i2c_device_id::driver_data to 0
This driver doesn't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize it.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241204140857.1691402-2-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Limiting the scope of devicetree support to CONFIG_OF prevents use of this
driver with ACPI via PRP0001. Drop the dependency.
While at it,
- Switch of.h for mod_devicetable.h include given the use of struct
of_device_id which is defined in that header
- Add I2C device ID for p3t1085
- Drop the unnecessary include of hwmon-sysfs.h.
Cc: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241204141754.4051186-1-linux@roeck-us.net
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
TMP108/P3T1085 are powered by the V+/VCC regulator, add support for it.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for TUF GAMING X670E PLUS.
Signed-off-by: Li XingYang <yanhuoguifan@gmail.com>
[groeck: Massaged description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
According to the LibreHardwareMonitor project, LibreHardwareMonitorLib/
Hardware/Motherboard/Lpc/EC/EmbeddedController.cs file, fan cpu opt
is supported by the AMD600 EC. Registers are described as follows.
BoardFamily.Amd600, new Dictionary<ECSensor, EmbeddedControllerSource>
{
{ ECSensor.FanCPUOpt, new EmbeddedControllerSource
("CPU Optional Fan", SensorType.Fan, 0x00b0, 2) },
}
Add FanCPUOpt support for AMD600.
Signed-off-by: Li XingYang <yanhuoguifan@gmail.com>
[groeck: Massaged subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
DEFAULT_SYMBOL_NAMESPACE must already be defined when <linux/export.h>
is included. So move the define above the include block.
Fixes: c3963bc0a0cf ("hwmon: (nct6775) Split core and platform driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add initial support for the Texas Instruments TPS25990 eFuse.
This adds the basic PMBUS telemetry support for the device.
From Karol Przybylski:
The tps25990_read_word_data function contains a block of unreachable code
caused by the syntactic structure in the PMBUS_VIRT_READ_IIN_MAX case.
Specifically, the return TPS25990_READ_IIN_PEAK; statement immediately
exits the function, making the next lines unreachable.
This patch removes the return statement, leaving the expected handling.
Discovered in coverity: CID 1602227
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to MODULE_IMPORT_NS API change]
[karprzy7@gmail.com: Fix unreachable code in tps25990_read_word_data]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a module parameter to force the write protection mode of pmbus chips.
4 protections modes are provided to start with:
* 0: Remove the write protection
* 1: Disable all writes except to the WRITE_PROTECT, OPERATION,
PAGE, ON_OFF_CONFIG and VOUT_COMMAND commands
* 2: Disable all writes except to the WRITE_PROTECT, OPERATION and
PAGE commands
* 3: Disable all writes except to the WRITE_PROTECT command
Of course, if the parameter is not provided, the default write protection
status of the pmbus chips is left untouched.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Writing PMBus protected registers does succeed from the smbus perspective,
even if the write is ignored by the device and a communication fault is
raised. This fault will silently be caught and cleared by pmbus irq if one
has been registered.
This means that the regulator call may return succeed although the
operation was ignored.
With this change, the operation which are not supported will be properly
flagged as such and the regulator framework won't even try to execute them.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[groeck: Adjust to EXPORT_SYMBOL_NS_GPL API change]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add suspend/resume handler in order to stop firmware polling
during s2idle. This was just waking-up the system without a real
benefit.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Using an #ifdef in a C source files to have different definitions
of the same symbol makes the code harder to read and understand.
Furthermore it makes it harder to test compilation of the different
branches.
Replace the ifdeffery with IS_ENABLED() which is just a normal
conditional.
The resulting binary is still the same as before as the compiler
optimizes away all the unused code and definitions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Switch to guard() for mutex handling to simplify the code, getting rid
of the 'ret = x, break; return ret;' construct and return the result
of the operation instead.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Function declarations can be in one line. module_init|exit macros should
be tied to the function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 120584c728a6 ("hwmon: (aquacomputer_d5next) Add support for Octo
flow sensor") added support for reading Octo flow sensor, but didn't
update the priv->speed_input array length. Since Octo has 8 fans, with
the addition of the flow sensor the proper length for speed_input is 9.
Reported by Arne Schwabe on Github [1], who received a UBSAN warning.
Fixes: 120584c728a6 ("hwmon: (aquacomputer_d5next) Add support for Octo flow sensor")
Closes: https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/100 [1]
Reported-by: Arne Schwabe <arne@rfc2549.org>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Message-ID: <20241124152725.7205-1-savicaleksa83@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Negative temperatures are reported as large positive temperatures
due to missing sign extension from unsigned int to long. Cast unsigned
raw register values to signed before performing the calculations
to fix the problem.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: Murad Masimov <m.masimov@maxima.ru>
Message-ID: <20241121173604.2021-1-m.masimov@maxima.ru>
[groeck: Updated subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
I3C device probe fails when CONFIG_REGMAP_I3C=m:
p3t1085_i3c 0-23615290090: error -ENODEV: Failed to register i3c regmap
Fix this by using the IS_ENABLED(CONFIG_REGMAP_I3C) macro in the code.
Fixes: c40655e33106 ("hwmon: (tmp108) Add support for I3C device")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Message-ID: <20241121121819.393104-1-jarkko.nikula@linux.intel.com>
[groeck: Remove #ifdef entirely; it is not needed due to dead code elimination]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hmon updates from Guenter Roeck:
"New drivers:
- ISL28022 power monitor
- Nuvoton NCT7363Y
Added support for new chips to existing drivers:
- The tmp180 driver now supports NXP p3t1085, including its I3C mode
- The ina2xx driver now supports SY24655 and INA260
- The amc6821 driver now supports tsd,mule
Other notable improvements:
- The sht4x driver now supports the chip heater
- The pmbus/isl68137 driver now supports a voltage divider on Vout
- The cros_ec driver registers with the thermal framework
- The pmbus/ltc2978 driver now supports LTC7841
- The PMBus core now allow drivers to override WRITE_PROTECT
Various other minor improvements and cleanups"
* tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits)
hwmon: (pmbus/isl68137) add support for voltage divider on Vout
dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
hwmon: tmp108: fix I3C dependency
hwmon: (cros_ec) register thermal sensors to thermal framework
hwmon: (tmp108) Add support for I3C device
hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support
hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method
hwmon: (nct6775-core) Fix overflows seen when writing limit attributes
hwmon: (pwm-fan) Introduce start from stopped state handling
dt-bindings: hwmon: pwm-fan: Document start from stopped state properties
hwmon: (tmp108) Add NXP p3t1085 support
dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
hwmon: (sch5627, max31827) Fix typos in driver documentation
hwmon: (jc42) Drop of_match_ptr() protection
hwmon: (f71882fg) Fix grammar in fan speed trip points explanation
dt-bindings: hwmon: pmbus: add ti tps25990 support
hwmon: (pmbus/core) clear faults after setting smbalert mask
hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT
hwmon: (pmbus) add documentation for existing flags
hwmon: (ina226) Add support for SY24655
...
|
|
Some applications require Vout to be higher than the detectable voltage
range of the Vsense pin for a given rail. In such applications, a voltage
divider may be placed between Vout and the Vsense pin, but this results
in erroneous telemetry being read back from the part. This change adds
support for a voltage divider to be defined in the devicetree for a (or
multiple) specific rail(s) for a supported digital multiphase device and
for the applicable Vout telemetry to be scaled based on the voltage
divider configuration.
This change copies the implementation of the vout-voltage-divider
devicetree property defined in the maxim,max20730 bindings schema since
it is the best fit for the use case of scaling hwmon PMBus telemetry. The
generic voltage-divider property used by many iio drivers was determined
to be a poor fit because that schema is tied directly to iio and the
isl68137 driver is not an iio driver.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Message-ID: <8c2d048f87282bcf66313afbf5e923d8fc17b4d7.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
It's possible to build a kernel with tmp108 built-in but i3c support
in a loadable module, but that results in a link failure:
x86_64-linux-ld: drivers/hwmon/tmp108.o: in function `p3t1085_i3c_probe':
tmp108.c:(.text+0x5f9): undefined reference to `i3cdev_to_dev'
Add a Kconfig dependency to ensure only the working configurations
are allowed.
Fixes: c40655e33106 ("hwmon: (tmp108) Add support for I3C device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-ID: <20241113175615.2442851-1-arnd@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
cros_ec hwmon driver probes available thermal sensors when probing the
driver. Register these thermal sensors to the thermal framework as well
via setting HWMON_C_REGISTER_TZ as a chip info, such that thermal
framework can adopt these sensors as well.
To make cros_ec registrable to thermal framework, the cros_ec dts need
the corresponding changes:
&cros_ec {
#thermal-sensor-cells = <1>;
};
Signed-off-by: Sung-Chi, Li <lschyi@chromium.org>
Message-ID: <20241113024000.3327161-1-lschyi@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for I3C device in the tmp108 driver to handle the P3T1085
sensor. Register the I3C device driver to enable I3C functionality for the
sensor.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Message-ID: <20241112-p3t1085-v4-2-a1334314b1e6@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add help function tmp108_common_probe() to pave road to support i3c for
P3T1085(NXP) chip.
Use dev_err_probe() to simplify the code.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Message-ID: <20241112-p3t1085-v4-1-a1334314b1e6@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
