summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2020-01-16drm/amdgpu/gfx10: update gfx golden settings for navi14Tianci.Yin
remove registers: mmSPI_CONFIG_CNTL add registers: mmSPI_CONFIG_CNTL_1 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu/gfx10: update gfx golden settingsTianci.Yin
remove registers: mmSPI_CONFIG_CNTL add registers: mmSPI_CONFIG_CNTL_1 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: check rlc_g firmware pointer is valid before using itshaoyunl
In SRIOV, rlc_g firmware is loaded by host, guest driver won't load it which will cause the rlc_fw pointer is null Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: drop amdgpu_job.ownerChristian König
Entirely unused. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: error out on entity with no run queueNirmoy Das
Disabled HW IP's entity initialized with NULL rq. We should not process any submit request from userspace for a disabled HW IP. Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdkfd: use map_queues for hiq on gfx v10 as wellHuang Rui
To align with gfx v9, we use the map_queues packet to load hiq MQD. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdkfd: use kiq to load the mqd of hiq queue for gfx v9 (v6)Aaron Liu
There is an issue that CP will check the HIQ queue to be configured and mapped with KIQ ring, otherwise, it will be unable to read back the secure buffer while the gfxoff is enabled even with trusted IP blocks. v1 -> v2: - Fix to remove surplus set_resources packets. - Fill the whole configuration in MQD. - Change the author as Aaron because he addressed the key point of this issue. - Add kiq ring lock. v2 -> v3: - Free the lock while in error return case. - Remove the programming only needed by the queue is unmapped. v3 -> v4: - Remove doorbell programming because it's used for restarting queue. - Remove CP scheduler programming because map_queue packet will handle this. v4 -> v5: - Remove cp_hqd_active because mec ucode will enable it while use map_queues. - Revise goto out_unlock. - Correct the right doorbell offset for HIQ that kfd driver assigned in the packet. v5 -> v6: - Merge Arcturus fix into this patch because it will get oops in Arcturus platform. Reported-by: Lisa Saturday <Lisa.Saturday@amd.com> Signed-off-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-and-Tested-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: flush TLB functions removal from kfd2kgd interfaceAlex Sierra
[Why] kfd2kgd interface will be deprecated. This removal only covers TLB invalidation for now. They have been replaced in amdgpu_amdkfd API. [How] TLB invalidate functions removed from the different amdkfd_gfx_v* versions. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: GPU TLB flush API moved to amdgpu_amdkfdAlex Sierra
[Why] TLB flush method has been deprecated using kfd2kgd interface. This implementation is now on the amdgpu_amdkfd API. [How] TLB flush functions now implemented in amdgpu_amdkfd. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: export function to flush TLB via pasidAlex Sierra
This can be used directly from amdgpu and amdkfd to invalidate TLB through pasid. It supports gmc v7, v8, v9 and v10. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: replace kcq enable/disable functions on gfx_v9Alex Sierra
[Why] There are HW-indpendent functions that enables and disables kcq. These functions use the kiq_pm4_funcs implementation. [How] Local kcq enable and disable functions removed and replace it by the generic kcq enable under amdgpu_gfx Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: implement tlbs invalidate on gfx9 gfx10Alex Sierra
tlbs invalidate pointer function added to kiq_pm4_funcs struct. This way, tlb flush can be done through kiq member. TLBs invalidatation implemented for gfx9 and gfx10. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: kiq pm4 function implementation for gfx_v9Alex Sierra
Functions implemented from kiq_pm4_funcs struct members for gfx_v9 version. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amdgpu: Avoid reclaim fs while eviction lockAlex Sierra
[Why] Avoid reclaim filesystem while eviction lock is held called from MMU notifier. [How] Setting PF_MEMALLOC_NOFS flags while eviction mutex is locked. Using memalloc_nofs_save / memalloc_nofs_restore API. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-15drm/amd/display: Reorder detect_edp_sink_caps before link settings read.Mario Kleiner
read_current_link_settings_on_detect() on eDP 1.4+ may use the edp_supported_link_rates table which is set up by detect_edp_sink_caps(), so that function needs to be called first. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Martin Leung <martin.leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-01-15drm/amdgpu: update goldensetting for renoirAaron Liu
Update mmSDMA0_UTCL1_WATERMK golden setting for renoir. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-15drm/dp_mst: Have DP_Tx send one msg at a timeWayne Lin
[Why] Noticed this while testing MST with the 4 ports MST hub from StarTech.com. Sometimes can't light up monitors normally and get the error message as 'sideband msg build failed'. Look into aux transactions, found out that source sometimes will send out another down request before receiving the down reply of the previous down request. On the other hand, in drm_dp_get_one_sb_msg(), current code doesn't handle the interleaved replies case. Hence, source can't build up message completely and can't light up monitors. [How] For good compatibility, enforce source to send out one down request at a time. Add a flag, is_waiting_for_dwn_reply, to determine if the source can send out a down request immediately or not. - Check the flag before calling process_single_down_tx_qlock to send out a msg - Set the flag when successfully send out a down request - Clear the flag when successfully build up a down reply - Clear the flag when find erros during sending out a down request - Clear the flag when find errors during building up a down reply - Clear the flag when timeout occurs during waiting for a down reply - Use drm_dp_mst_kick_tx() to try to send another down request in queue at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages in queue when errors occur) Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com
2020-01-15drm/vmwgfx: Use VM_PFNMAP instead of VM_MIXEDMAP when possibleThomas Hellstrom
For shared, and read-only private mappings of graphics memory, use VM_PFNMAP instead of VM_MIXEDMAP. This means less accounting overhead when inserting and removing page-table entries. TTM doesn't do this by default, since there was a performance problem with book-keeping of write-combined mappings. Since vmwgfx solely uses cached mappings, that's not a problem and now that the TTM vm has largely been turned into helpers, we can use VM_PFNMAP on a per-driver basis Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com>
2020-01-15drm/vmwgfx: Bump driver minor versionThomas Hellstrom
Bump driver minor version to signal availability of the host messaging ioctl. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Charmaine Lee <charmainel@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com>
2020-01-15drm/vmwgfx: add ioctl for messaging from/to guest userspace to/from hostRoland Scheidegger
Up to now, guest userspace does logging directly to host using essentially the same rather complex port assembly stuff as the kernel. We'd rather use the same mechanism than duplicate it (it may also change in the future), hence add a new ioctl for relaying guest/host messaging (logging is just one application of it). Signed-off-by: Roland Scheidegger <sroland@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2020-01-15drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_addNavid Emamdoost
In vmw_cmdbuf_res_add if drm_ht_insert_item fails the allocated memory for cres should be released. Fixes: 18e4a4669c50 ("drm/vmwgfx: Fix compat shader namespace") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2020-01-15drm/vmwgfx: drop DRM_AUTH for render ioctlsEmil Velikov
With earlier commit 9c84aeba67cc ("drm/vmwgfx: Kill unneeded legacy security features") we removed the no longer applicable validation, as we now have isolation of primary clients from different master realms. As of last commit, we're explicitly checking for authentication in the only render ioctls which care about one. With those in place, the DRM_AUTH token serves no real purpose. Let's drop it. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2020-01-15drm/vmwgfx: check master authentication in surface_ref ioctlsEmil Velikov
With later commit we'll rework DRM authentication handling. Namely DRM_AUTH will not be a requirement for DRM_RENDER_ALLOW ioctls. Since vmwgfx does isolation for primary clients in different master realms, the DRM_AUTH can be dropped. The only place where authentication matters, is surface_reference ioctls whenever a legacy (non-prime) handle is used. For those ioctls we call vmw_surface_handle_reference(), where we explicitly check if the client is both a) master and b) unauthenticated - bailing out as result. Otherwise the usual isolation path kicks in and we're all good. v2: Reword commit message, since the isolation work has landed. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2020-01-15drm/vmwgfx: move the require_exist handling togetherEmil Velikov
Move the render_client hunk for require_exist alongside the rest. Keeping all the reasons why an existing object is needed, in a single place makes it easier to follow. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2020-01-15drm/vmwgfx: Replace deprecated PTR_RETLukas Bulwahn
Commit 508108ea2747 ("drm/vmwgfx: Don't refcount command-buffer managed resource lookups during command buffer validation") slips in use of deprecated PTR_RET. Use PTR_ERR_OR_ZERO instead. As the PTR_ERR_OR_ZERO is a bit longer than PTR_RET, we introduce local variable ret for proper indentation and line-length limits. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2020-01-15drm/vmwgfx: Call vmw_driver_{load,unload}() before registering deviceThomas Zimmermann
The load/unload callbacks in struct drm_driver are deprecated. Remove them and call functions explicitly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2020-01-15drm/vmwgfx: Don't use the HB port if memory encryption is activeThomas Hellstrom
With memory encryption active, the hypervisor typically can't read the guest memory using the HB port, since it is encrypted using a key known only to the guest. In that case fall back to processing 4 bytes at a time using the ordinary backdoor port. The other option would be to use unencrypted bounce buffers for the hypervisor to read out from or write into, but given the limited message sizes it appears more efficient to just fall back to the ordinary backdoor port. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Roland Scheidegger <sroland@vmware.com>
2020-01-15Merge tag 'drm-intel-next-2020-01-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Final drm/i915 features for v5.6: - DP MST fixes (José) - Fix intel_bw_state memory leak (Pankaj Bharadiya) - Switch context id allocation to xarray (Tvrtko) - ICL/EHL/TGL workarounds (Matt Roper, Tvrtko) - Debugfs for LMEM details (Lukasz Fiedorowicz) - Prefer platform acronyms over codenames in symbols (Lucas) - Tiled and port sync mode fixes for fbdev and DP (Manasi) - DSI panel and backlight enable GPIO fixes (Hans de Goede) - Relax audio min CDCLK requirements on non-GLK (Kai Vehmanen) - Plane alignment and dimension check fixes (Imre) - Fix state checks for PSR (José) - Remove ICL+ clock gating programming (José) - Static checker fixes around bool usage (Ma Feng) - Bring back tests for self-contained headers in i915 (Masahiro Yamada) - Fix DP MST disable sequence (Ville) - Start converting i915 to the new drm device based logging macros (Wambui Karuga) - Add DSI VBT I2C sequence execution (Vivek Kasireddy) - Start using function pointers and ops structs in uc code (Michal) - Fix PMU names to not use colons or dashes (Tvrtko) - TGL media decompression support (DK, Imre) - Split i915_gem_gtt.[ch] to more manageable chunks (Matthew Auld) - Create dumb buffers in LMEM where available (Ram) - Extend mmap support for LMEM (Abdiel) - Selftest updates (Chris) - Hack bump up CDCLK on TGL to avoid underruns (Stan) - Use intel_encoder and intel_connector more instead of drm counterparts (Ville) - Build error fixes (Zhang Xiaoxu) - Fixes related to GPU and engine initialization/resume (Chris) - Support for prefaulting discontiguous objects (Abdiel) - Support discontiguous LMEM object maps (Chris) - Various GEM and GT improvements and fixes (Chris) - Merge pinctrl dependencies branch for the DSI GPIO updates (Jani) - Backmerge drm-next for new logging macros (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sgkil0v9.fsf@intel.com
2020-01-15Merge branch 'linux-5.6' of git://github.com/skeggsb/linux into drm-nextDave Airlie
- Rewrite of the ACR (formerly "secure boot") code, both to support Turing, support multiple FW revisions, and to make life easier when having to debug HW/FW bring-up in the future - Support for TU10x graphics engine, TU11x not available yet as FW isn't ready - Proper page 'kind' mappings for Turing - 10-bit LUT support - GP10B (Tegra) fixes - Misc other fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5GKasg9-hEUwp9+aHVJg+nbQ0LukXyudgj6=YKu96jWQ@mail.gmail.com
2020-01-15Merge tag 'mediatek-drm-next-5.6' of ↵Dave Airlie
https://github.com/ckhu-mediatek/linux.git-tags into drm-next Mediatek DRM Next for Linux 5.6 This fix non-smooth cursor problem, add cmdq support, add ctm property support and some refinement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1578972526.14594.8.camel@mtksdaap41
2020-01-15Merge tag 'drm/tegra/for-5.6-rc1' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Changes for v5.6-rc1 This contains a small set of mostly fixes and some minor improvements. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com
2020-01-15drm/nouveau/gr/tu10x: initial supportBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/acr/tu10x: initial supportBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/core: remove previous versioned fw loaderBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/secboot: removeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/acr: implement new subdev to replace "secure boot"Ben Skeggs
ACR is responsible for managing the firmware for LS (Low Secure) falcons, this was previously handled in the driver by SECBOOT. This rewrite started from some test code that attempted to replicate the procedure RM uses in order to debug early Turing ACR firmwares that were provided by NVIDIA for development. Compared with SECBOOT, the code is structured into more individual steps, with the aim of making the process easier to follow/debug, whilst making it possible to support newer firmware versions that may have a different binary format or API interface. The HS (High Secure) binary(s) are now booted earlier in device init, to match the behaviour of RM, whereas SECBOOT would delay this until we try to boot the first LS falcon. There's also additional debugging features available, with the intention of making it easier to solve issues during FW/HW bring-up in the future. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/fb/gp102-: unlock VPR as part of FB initBen Skeggs
We perform memory allocations long before we hit the code in SECBOOT that would unlock the VPR, which could potentially result in memory allocation within the locked region. Run the scrubber binary right after VRAM init to ensure we don't. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/core/memory: add macros to read/write blocks from objectsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/secboot: move code to boot LS falcons to subdevsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: rename msgq-related nvkm_msgqueue_queue to ↵Ben Skeggs
nvkm_falcon_msgq Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: pass explicit message queue pointer to recv()Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: move handling of init message to subdevsBen Skeggs
When the PMU/SEC2 LS FWs have booted, they'll send a message to the host with various information, including the configuration of message/command queues that are available. Move the handling for this to the relevant subdevs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: drop nvkm_msgqueue argument to functionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: switch to falcon queue printk macrosBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: simplify msg_queue_pop() error handlingBen Skeggs
We always want at least requested size, make anything less a more direct error condition. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: remove error handling for msg_queue_open(), it can't failBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: move command generation to subdevsBen Skeggs
This moves the code to generate commands for the ACR unit of the PMU/SEC2 LS firmwares to those subdevs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: rename cmdq-related nvkm_msqqueue_queue to ↵Ben Skeggs
nvkm_falcon_cmdq Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: implement a more explicit send() interfaceBen Skeggs
Takes the command queue pointer directly instead of requiring a function to lookup based on an queue type, as well as an explicit timeout value. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: drop nvkm_msgqueue argument to functionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 02:34:37 +0000