summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2022-02-02drm/amd/display: Update watermark values for DCN301Agustin Gutierrez
[Why] There is underflow / visual corruption DCN301, for high bandwidth MST DSC configurations such as 2x1440p144 or 2x4k60. [How] Use up-to-date watermark values for DCN301. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-02drm/amdgpu: fix a potential GPU hang on cyan skillfishLang Yu
We observed a GPU hang when querying GMC CG state(i.e., cat amdgpu_pm_info) on cyan skillfish. Acctually, cyan skillfish doesn't support any CG features. Just prevent it from accessing GMC CG registers. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-02-02drm/amd: Only run s3 or s0ix if system is configured properlyMario Limonciello
This will cause misconfigured systems to not run the GPU suspend routines. * In APUs that are properly configured system will go into s2idle. * In APUs that are intended to be S3 but user selects s2idle the GPU will stay fully powered for the suspend. * In APUs that are intended to be s2idle and system misconfigured the GPU will stay fully powered for the suspend. * In systems that are intended to be s2idle, but AMD dGPU is also present, the dGPU will go through S3 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd: add support to check whether the system is set to s3Mario Limonciello
This will be used to help make decisions on what to do in misconfigured systems. v2: squash in semicolon fix from Stephen Rothwell Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02phy: dphy: Correct clk_pre parameterLiu Ying
The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE parameter's unit is Unit Interval(UI) and the minimum value is 8. Also, kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy mentions that it should be in UI. However, the dphy core driver wrongly sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds. So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE parameter's minimum value according to the D-PHY specification. I'm assuming that all impacted custom drivers shall program values in TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY specification mentions that the frequency of TxByteClkHS is exactly 1/8 the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant custom driver code is changed to program those values as DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: 2ed869990e14 ("phy: Add MIPI D-PHY configuration options") Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-02-01drm/i915/pmu: Fix KMD and GuC race on accessing busynessUmesh Nerlige Ramappa
GuC updates shared memory and KMD reads it. Since this is not synchronized, we run into a race where the value read is inconsistent. Sometimes the inconsistency is in reading the upper MSB bytes of the last_switch_in value. 2 types of cases are seen - upper 8 bits are zero and upper 24 bits are zero. Since these are non-zero values, it is not trivial to determine validity of these values. Instead we read the values multiple times until they are consistent. In test runs, 3 attempts results in consistent values. The upper bound is set to 6 attempts and may need to be tuned as per any new occurences. Since the duration that gt is parked can vary, the patch also updates the gt timestamp on unpark before starting the worker. v2: - Initialize i - Use READ_ONCE to access engine record Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220125020124.788679-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit 512712a824de9b856a4e61343e3e4390eba2c391) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/amd: Warn users about potential s0ix problemsMario Limonciello
On some OEM setups users can configure the BIOS for S3 or S2idle. When configured to S3 users can still choose 's2idle' in the kernel by using `/sys/power/mem_sleep`. Before commit 6dc8265f9803 ("drm/amdgpu: always reset the asic in suspend (v2)"), the GPU would crash. Now when configured this way, the system should resume but will use more power. As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about potential power consumption issues during their first attempt at suspending. Reported-by: Bjoren Dasse <bjoern.daase@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-31drm/amd/pm: correct the MGpuFanBoost support for Beige GobyEvan Quan
The existing way cannot handle Beige Goby well as a different PPTable data structure(PPTable_beige_goby_t instead of PPTable_t) is used there. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-01-31drm/nouveau: fix off by one in BIOS boundary checkingNick Lopez
Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. Signed-off-by: Nick Lopez <github@glowingmonkey.org> Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
2022-01-31drm/i915/adlp: Fix TypeC PHY-ready status readoutImre Deak
The TCSS_DDI_STATUS register is indexed by tc_port not by the FIA port index, fix this up. This only caused an issue on TC#3/4 ports in legacy mode, as in all other cases the two indices either match (on TC#1/2) or the TCSS_DDI_STATUS_READY flag is set regardless of something being connected or not (on TC#1/2/3/4 in dp-alt and tbt-alt modes). Reported-and-tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Fixes: 55ce306c2aa1 ("drm/i915/adl_p: Implement TC sequences") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4698 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220126104356.2022975-1-imre.deak@intel.com (cherry picked from commit 516b33460c5bee78b2055637b0547bdb0e6af754) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915/pmu: Use PM timestamp instead of RING TIMESTAMP for referenceUmesh Nerlige Ramappa
All timestamps returned by GuC for GuC PMU busyness are captured from GUC PM TIMESTAMP. Since this timestamp does not tick when GuC goes idle, kmd uses RING_TIMESTAMP to measure busyness of an engine with an active context. In further stress testing, the MMIO read of the RING_TIMESTAMP is seen to cause a rare hang. Resolve the issue by using gt specific timestamp from PM which is in sync with the GuC PM timestamp. Fixes: 77cdd054dd2c ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111015523.225562-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 721fd84ea1fe957453587efad5fdc44dfba58e04) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915/overlay: Prevent divide by zero bugs in scalingDan Carpenter
Smatch detected a divide by zero bug in check_overlay_scaling(). drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_height'. drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_width'. Prevent this by ensuring that the dst height and width are non-zero. Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili (cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915: Lock timeline mutex directly in error path of eb_pin_timelineMatthew Brost
Don't use the interruptable version of the timeline mutex lock in the error path of eb_pin_timeline as the cleanup must always happen. v2: (John Harrison) - Don't check for interrupt during mutex lock v3: (Tvrtko) - A comment explaining why lock helper isn't used Fixes: 544460c33821 ("drm/i915: Multi-BB execbuf") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111163929.14017-1-matthew.brost@intel.com (cherry picked from commit cb935c4618bd2ff9058feee4af7088446da6a763) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-31drm/i915: Allocate intel_engine_coredump_alloc with ALLOW_FAILMatthew Brost
Allocate intel_engine_coredump_alloc with ALLOW_FAIL rather than GFP_KERNEL to fully decouple the error capture from fence signalling. v2: (John Harrison) - Fix typo in commit message (s/do/to) Fixes: 8b91cdd4f8649 ("drm/i915: Use __GFP_KSWAPD_RECLAIM in the capture code") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220121043118.24886-2-matthew.brost@intel.com (cherry picked from commit 4f72fc3c7f3d9f29a438bb0e17c7773f2fc8242a) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-01-28Merge tag 'drm-fixes-2022-01-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This week's regular normal fixes. amdgpu and msm make up the bulk of it, with a scattering of fixes elsewhere. atomic: - fix CRTC handling during modeset privcy-screen: - honor acpi=off ttm: - build fix for um panel: - add orientation quirk for 1NetBook OneXPlayer amdgpu: - Proper fix for otg synchronization logic regression - DCN3.01 fixes - Filter out secondary radeon PCI IDs - udelay fixes - Fix a memory leak in an error path msm: - parameter check fixes - put_device balancing - idle/suspend fixes etnaviv: - relax submit size checks vc4: - fix potential deadlock in DSI code ast: - revert 1600x900 mode change" * tag 'drm-fixes-2022-01-28' of git://anongit.freedesktop.org/drm/drm: (25 commits) drm/privacy-screen: honor acpi=off in detect_thinkpad_privacy_screen Revert "drm/ast: Support 1600x900 with 108MHz PCLK" drm/amdgpu/display: Remove t_srx_delay_us. drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU. drm/amd/display: Fix FP start/end for dcn30_internal_validate_bw. drm/amd/display/dc/calcs/dce_calcs: Fix a memleak in calculate_bandwidth() drm/amdgpu/display: use msleep rather than udelay for long delays drm/amdgpu/display: adjust msleep limit in dp_wait_for_training_aux_rd_interval drm/amdgpu: filter out radeon secondary ids as well drm/amd/display: change FIFO reset condition to embedded display only drm/amd/display: Correct MPC split policy for DCN301 drm/amd/display: Fix for otg synchronization logic drm/etnaviv: relax submit size limits drm/msm/gpu: Cancel idle/boost work on suspend drm/msm/gpu: Wait for idle before suspending drm/atomic: Add the crtc to affected crtc only if uapi.enable = true drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable drm/msm/a6xx: Add missing suspend_count increment drm/msm: Fix wrong size calculation drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc ...
2022-01-28Merge tag 'amd-drm-fixes-5.17-2022-01-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.17-2022-01-26: amdgpu: - Proper fix for otg synchronization logic regression - DCN3.01 fixes - Filter out secondary radeon PCI IDs - udelay fixes - Fix a memory leak in an error path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127041006.5695-1-alexander.deucher@amd.com
2022-01-28Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes - relax submit size checks. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/8c2cb3e3a702be86db9d43ca8927b6b78ac2b1d2.camel@pengutronix.de
2022-01-28Merge tag 'drm-msm-fixes-2022-01-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes A few msm fixes. - parameter checks - put_device balancing - idle/suspend fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvAfsgtr==VM4wixAC_hSTuV=eNWXxX=BhZqQrbxHjKgg@mail.gmail.com
2022-01-28Merge tag 'drm-misc-fixes-2022-01-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * drm/ast: Revert 1600x800 with 108MHz PCLK * drm/atomic: fix CRTC handling during modeset * drm/privacy-screen: Honor acpi=off * drm/ttm: build fix for ARCH=um Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YfJgH9fz+oo7YSXd@linux-uq9g.fritz.box
2022-01-28Merge tag 'drm-misc-next-fixes-2022-01-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * vc4: Fix potential deadlock in DSI code * panel: Add orientation quirk for 1Netbook OneXPlayer Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Yepuhj+Ks+IyJ9Dp@linux-uq9g
2022-01-27drm/kmb: Fix for build errors with Warray-boundsAnitha Chrisanthus
This fixes the following build error drivers/gpu/drm/kmb/kmb_plane.c: In function 'kmb_plane_atomic_disable': drivers/gpu/drm/kmb/kmb_plane.c:165:34: error: array subscript 3 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 165 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL2_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ drivers/gpu/drm/kmb/kmb_plane.c:162:34: error: array subscript 2 is above array bounds of 'struct layer_status[2]' [-Werror=array-bounds] 162 | kmb->plane_status[plane_id].ctrl = LCD_CTRL_GL1_ENABLE; | ~~~~~~~~~~~~~~~~~^~~~~~~~~~ In file included from drivers/gpu/drm/kmb/kmb_plane.c:17: drivers/gpu/drm/kmb/kmb_drv.h:61:41: note: while referencing 'plane_status' 61 | struct layer_status plane_status[KMB_MAX_PLANES]; | ^~~~~~~~~~~~ Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220127194227.2213608-1-anitha.chrisanthus@intel.com
2022-01-27gpu: host1x: Fix hang on Tegra186+Dmitry Osipenko
Tegra186+ hangs if host1x hardware is disabled at a kernel boot time because we touch hardware before runtime PM is resumed. Move sync point assignment initialization to the RPM-resume callback. Older SoCs were unaffected because they skip that sync point initialization. Tested-by: Jon Hunter <jonathanh@nvidia.com> # T186 Reported-by: Jon Hunter <jonathanh@nvidia.com> # T186 Fixes: 6b6776e2ab8a ("gpu: host1x: Add initial runtime PM and OPP support") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-01-27drm/vmwgfx: Fix stale file descriptors on failed usercopyMathias Krause
A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded. Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support") Signed-off-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Zack Rusin <zackr@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-26drm/privacy-screen: honor acpi=off in detect_thinkpad_privacy_screenTong Zhang
when acpi=off is provided in bootarg, kernel crash with [ 1.252739] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 1.258308] Call Trace: [ 1.258490] ? acpi_walk_namespace+0x147/0x147 [ 1.258770] acpi_get_devices+0xe4/0x137 [ 1.258921] ? drm_core_init+0xc0/0xc0 [drm] [ 1.259108] detect_thinkpad_privacy_screen+0x5e/0xa8 [drm] [ 1.259337] drm_privacy_screen_lookup_init+0xe/0xe85 [drm] The reason is that acpi_walk_namespace expects acpi related stuff initialized but in fact it wouldn't when acpi is set to off. In this case we should honor acpi=off in detect_thinkpad_privacy_screen(). Signed-off-by: Tong Zhang <ztong0001@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220123091004.763775-1-ztong0001@gmail.com
2022-01-26Revert "drm/ast: Support 1600x900 with 108MHz PCLK"Dave Airlie
This reverts commit 9bb7b689274b67ecb3641e399e76f84adc627df1. This caused a regression reported to Red Hat. Fixes: 9bb7b689274b ("drm/ast: Support 1600x900 with 108MHz PCLK") Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220120040527.552068-1-airlied@gmail.com
2022-01-26Merge drm/drm-fixes into drm-misc-fixesThomas Zimmermann
Backmerging drm/drm-fixes into drm-misc-fixes for v5.17-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-01-25drm/amdgpu/display: Remove t_srx_delay_us.Bas Nieuwenhuizen
Unused. Convert the divisions into asserts on the divisor, to debug why it is zero. The divide by zero is suspected of causing kernel panics. While I have no idea where the zero is coming from I think this patch is a positive either way. Cc: stable@vger.kernel.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU.Bas Nieuwenhuizen
Mirrors the logic for dcn30. Cue lots of WARNs and some kernel panics without this fix. Cc: stable@vger.kernel.org Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Fix FP start/end for dcn30_internal_validate_bw.Bas Nieuwenhuizen
It calls populate_dml_pipes which uses doubles to initialize the scale_ratio_depth params. Mirrors the dcn20 logic. Cc: stable@vger.kernel.org Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display/dc/calcs/dce_calcs: Fix a memleak in calculate_bandwidth()Zhou Qingyang
In calculate_bandwidth(), the tag free_sclk and free_yclk are reversed, which could lead to a memory leak of yclk. Fix this bug by changing the location of free_sclk and free_yclk. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code. Fixes: 2be8989d0fc2 ("drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amdgpu/display: use msleep rather than udelay for long delaysAlex Deucher
Some architectures (e.g., ARM) throw an compilation error if the udelay is too long. In general udelays of longer than 2000us are not recommended on any architecture. Switch to msleep in these cases. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amdgpu/display: adjust msleep limit in dp_wait_for_training_aux_rd_intervalAlex Deucher
Some architectures (e.g., ARM) have relatively low udelay limits. On most architectures, anything longer than 2000us is not recommended. Change the check to align with other similar checks in DC. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amdgpu: filter out radeon secondary ids as wellAlex Deucher
Older radeon boards (r2xx-r5xx) had secondary PCI functions which we solely there for supporting multi-head on OSs with special requirements. Add them to the unsupported list as well so we don't attempt to bind to them. The driver would fail to bind to them anyway, but this does so in a cleaner way that should not confuse the user. Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: change FIFO reset condition to embedded display onlyZhan Liu
[Why] FIFO reset is only necessary for fast boot sequence, where otg is disabled and dig fe is enabled when changing dispclk. Fast boot is only enabled on embedded displays. [How] Change FIFO reset condition to "embedded display only". Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Correct MPC split policy for DCN301Zhan Liu
[Why] DCN301 has seamless boot enabled. With MPC split enabled at the same time, system will hang. [How] Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have ODM combine enabled on DCN301, pipe split is not necessary here. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Fix for otg synchronization logicMeenakshikumar Somasundaram
[Why] During otg sync trigger, plane states are used to decide whether the otg is already synchronized or not. There are scenarions when otgs are disabled without plane state getting disabled and in such case the otg is excluded from synchronization. [How] Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe. When a otg is disabled/enabled, pipe_idx_syncd is reset to itself. On sync trigger, pipe_idx_syncd is checked to decide whether a otg is already synchronized and the otg is further included or excluded from synchronization. v2: Don't drop is_blanked logic Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Cc: torvalds@linux-foundation.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/i915: Flush TLBs before releasing backing storeTvrtko Ursulin
We need to flush TLBs before releasing backing store otherwise userspace is able to encounter stale entries if a) it is not declaring access to certain buffers and b) it races with the backing store release from a such undeclared execution already executing on the GPU in parallel. The approach taken is to mark any buffer objects which were ever bound to the GPU and to trigger a serialized TLB flush when their backing store is released. Alternatively the flushing could be done on VMA unbind, at which point we would be able to ascertain whether there is potential a parallel GPU execution (which could race), but essentially it boils down to paying the cost of TLB flushes potentially needlessly at VMA unbind time (when the backing store is not known to be going away so not needed for safety), versus potentially needlessly at backing store relase time (since we at that point cannot tell whether there is anything executing on the GPU which uses that object). Thereforce simplicity of implementation has been chosen for now with scope to benchmark and refine later as required. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-25drm/etnaviv: relax submit size limitsLucas Stach
While all userspace tried to limit commandstreams to 64K in size, a bug in the Mesa driver lead to command streams of up to 128K being submitted. Allow those to avoid breaking existing userspace. Fixes: 6dfa2fab8ddd ("drm/etnaviv: limit submit sizes") Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2022-01-25drm/msm/gpu: Cancel idle/boost work on suspendRob Clark
With system suspend using pm_runtime_force_suspend() we can't rely on the pm_runtime_get_if_in_use() trick to deal with devfreq callbacks after (or racing with) suspend. So flush any pending idle or boost work in the suspend path. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20220108180913.814448-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-01-25drm/msm/gpu: Wait for idle before suspendingRob Clark
System suspend uses pm_runtime_force_suspend(), which cheekily bypasses the runpm reference counts. This doesn't actually work so well when the GPU is active. So add a reasonable delay waiting for the GPU to become idle. Alternatively we could just return -EBUSY in this case, but that has the disadvantage of causing system suspend to fail. v2: s/ret/remaining [sboyd], and switch to using active_submits count to ensure we aren't racing with submit cleanup (and devfreq idle work getting scheduled, etc) v3: fix inverted logic Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220108180913.814448-2-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-01-24drm/atomic: Add the crtc to affected crtc only if uapi.enable = trueManasi Navare
In case of a modeset where a mode gets split across multiple CRTCs in the driver specific implementation (bigjoiner in i915) we wrongly count the affected CRTCs based on the drm_crtc_mask and indicate the stolen CRTC as an affected CRTC in atomic_check_only(). This triggers a warning since affected CRTCs doent match requested CRTC. To fix this in such bigjoiner configurations, we should only increment affected crtcs if that CRTC is enabled in UAPI not if it is just used internally in the driver to split the mode. v3: Add the same uapi crtc_state->enable check in requested crtc calc (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Simon Ser <contact@emersion.fr> Cc: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.11+ Fixes: 919c2299a893 ("drm/i915: Enable bigjoiner") Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211004115913.23889-1-manasi.d.navare@intel.com
2022-01-25drm/msm/dsi: invalid parameter check in msm_dsi_phy_enableJosé Expósito
The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 5c8290284402b ("drm/msm/dsi: Split PHY drivers to separate files") Addresses-Coverity-ID: 1493860 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220116181844.7400-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm/a6xx: Add missing suspend_count incrementRob Clark
Reported-by: Danylo Piliaiev <dpiliaiev@igalia.com> Fixes: 3ab1c5cc3939 ("drm/msm: Add param for userspace to query suspend count") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220113163215.215367-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm: Fix wrong size calculationXianting Tian
For example, memory-region in .dts as below, reg = <0x0 0x50000000 0x0 0x20000000> We can get below values, struct resource r; r.start = 0x50000000; r.end = 0x6fffffff; So the size should be: size = r.end - r.start + 1 = 0x20000000 Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Fixes: 072f1f9168ed ("drm/msm: add support for "stolen" mem") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220112123334.749776-1-xianting.tian@linux.alibaba.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pccJosé Expósito
The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 4259ff7ae509e ("drm/msm/dpu: add support for pcc color block in dpu driver") Addresses-Coverity-ID: 1493866 ("Null pointer dereference") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20220109192431.135949-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm/hdmi: Fix missing put_device() call in msm_hdmi_get_phyMiaoqian Lin
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: e00012b256d4 ("drm/msm/hdmi: Make HDMI core get its PHY") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220107085026.23831-1-linmq006@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm/dsi: Fix missing put_device() call in dsi_get_phyMiaoqian Lin
If of_find_device_by_node() succeeds, dsi_get_phy() doesn't a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: ec31abf ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211230070943.18116-1-linmq006@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm: remove variable set but not usedYang Li
The code that uses variable mdss has been removed, So the declaration and assignment of the variable can be removed. Eliminate the following clang warning: drivers/gpu/drm/msm/msm_drv.c:513:19: warning: variable 'mdss' set but not used [-Wunused-but-set-variable] Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 2027e5b3413d ("drm/msm: Initialize MDSS irq domain at probe time") Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211216031103.34146-1-yang.lee@linux.alibaba.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-22lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()Vlastimil Babka
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 01:17:06 +0000