| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit a695949b2e9bb6b6700a764c704731a306c4bebf ]
Allocated canvases may not be released on the error exit path of
meson_drv_bind_master(), leading to resource leaking. Rewrite exit path
to release canvases on error.
Fixes: 2bf6b5b0e374 ("drm/meson: exclusively use the canvas provider module")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240703155826.10385-2-ziyao@disroot.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703155826.10385-2-ziyao@disroot.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6769a23697f17f9bf9365ca8ed62fe37e361a05a upstream.
The "instance" variable needs to be signed for the error handling to work.
Fixes: 8b2faf1a4f3b ("drm/amdgpu: add error handle to avoid out-of-bounds")
Reviewed-by: Bob Zhou <bob.zhou@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Siddh Raman Pant <siddh.raman.pant@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6fb15dcbcf4f212930350eaee174bb60ed40a536 ]
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ef1548aeaa8858e7aee2152bf95cc71cdcd6dff ]
[Why]
Some of the panels does not have the refresh rate range info
in base EDID and only have the refresh rate range info in
DisplayID block.
It will cause the max/min freesync refresh rate set to 0.
[How]
Try to parse the refresh rate range info from DisplayID if the
max/min refresh rate is 0.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 074b3a886713f69d98d30bb348b1e4cb3ce52b22 ]
[Description]
We need to ensure to take into account cursor prefetch BW in
mode support or we may pass ModeQuery but fail an actual flip
which will cause a hang. Flip may fail because the cursor_pre_bw
is populated during mode programming (and mode programming is
never called prior to ModeQuery).
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74ad26b36d303ac233eccadc5c3a8d7ee4709f31 ]
[Why]
We only enable the VRR while monitor usable refresh rate range
is greater than 10 Hz.
But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ
case.
[How]
Add a refresh rate range check before set the freesync_capable flag
in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49c9ffabde555c841392858d8b9e6cf58998a50c ]
To achieve full occupancy CP hardware needs to know if CUs in SE are
symmetrically or asymmetrically harvested
v2: Reset is_symmetric_cus for each loop
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c4d6945fe5bd04ff847c3c788abd34ca354ecee ]
VMWARE_HYPERCALL alternative will not work as intended without VMware guest code
initialization.
[ bp: note that this doesn't reproduce with newer gccs so it must be
something gcc-9-specific. ]
Closes: https://lore.kernel.org/oe-kbuild-all/202406152104.FxakP1MB-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexey Makhalov <alexey.makhalov@broadcom.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240616012511.198243-1-alexey.makhalov@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c38896ca6318c2df20bbe6c8e3f633e071fda910 ]
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
This driver users the component model and shutdown happens in the base
driver. The "drvdata" for this driver will always be valid if
shutdown() is called and as of commit 2a073968289d
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a
noop") we don't need to confirm that "drm" is non-NULL.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611102744.v2.1.I2b014f90afc4729b6ecc7b5ddd1f6dedcea4625b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f74fb5df429ebc6a614dc5aa9e44d7194d402e5a ]
Similar to the other Aya Neo devices this one features
again a portrait screen, here with a native resolution
of 1600x2560.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240310220401.895591-1-tjakobi@math.uni-bielefeld.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f3512cdf8299f9edaea9046d53ea324a7730bab ]
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05d9e24ddb15160164ba6e917a88c00907dc2434 ]
Convert a variable sized array from [1] to [].
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 26746ed40bb0e4ebe2b2bd61c04eaaa54e263c14 upstream.
Valve's Steam Deck Galileo revision has a 800x1280 OLED panel
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: John Schoenick <johns@valvesoftware.com>
Signed-off-by: Matthew Schwartz <mattschwartz@gwu.edu>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628205822.348402-2-mattschwartz@gwu.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0417264437a8fa05f894cabba5a26715b32d78e upstream.
This is a variable sized array.
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/110420.html
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80bec6825b19d95ccdfd3393cf8ec15ff2a749b4 upstream.
In nouveau_connector_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: 6ee738610f41 ("drm/nouveau: Add DRM driver for NVIDIA GPUs")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627074204.3023776-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ea686fef5489ef7a2450a9fdbcc732b837fb46a8 ]
Converting size from size_t to int may overflow.
v2: keep reverse xmas tree order (Christian)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a5f15d2a29d06ce5bd50919da7221cda92afb69 ]
Clear warning that uses uninitialized value fw_size.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f95bcb041f213a5da3da5fcaf73269bd13dba945 ]
This fixes 11 UNINIT issues reported by Coverity.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1357b2165d9ad94faa4c4a20d5e2ce29c2ff29c3 ]
[WHY]
ENGINE_ID_UNKNOWN = -1 and can not be used as an array index. Plus, it
also means it is uninitialized and does not need free audio.
[HOW]
Skip and return NULL.
This fixes 2 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5396a70e8cf462ec5ccf2dc8de103c79de9489e6 ]
pipe_ctx has a size of MAX_PIPES so checking its index before accessing
the array.
This fixes an OVERRUN issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59d99deb330af206a4541db0c4da8f73880fba03 ]
[WHAT]
msg_id is used as an array index and it cannot be a negative value, and
therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1).
[HOW]
Check whether msg_id is valid before reading and setting.
This fixes 4 OVERRUN issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2e55bcf3d742a4946d862b86e39e75a95cc6f1c0 ]
Initialize the interrupt timestamp for some legacy SOCs
to fix the coverity issue "Uninitialized scalar variable"
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 88a9a467c548d0b3c7761b4fd54a68e70f9c0944 ]
Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001.
V2: To really improve the handling we would actually
need to have a separate value of 0xffffffff.(Christian)
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60c448439f3b5db9431e13f7f361b4074d0e8594 ]
return 0 to avoid returning an uninitialized variable r
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6683c690bbfd1f371510cb051e8fa49507f3f5e ]
lima uses a shared interrupt, so the interrupt handlers must be prepared
to be called at any time. At driver removal time, the clocks are
disabled early and the interrupts stay registered until the very end of
the remove process due to the devm usage.
This is potentially a bug as the interrupts access device registers
which assumes clocks are enabled. A crash can be triggered by removing
the driver in a kernel with CONFIG_DEBUG_SHIRQ enabled.
This patch frees the interrupts at each lima device finishing callback
so that the handlers are already unregistered by the time we fully
disable clocks.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401224329.1228468-2-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f6f49dda49db72e7a0b4ca32c77391d5ff5ce232 upstream.
v3.x changed the how vram width was encoded. The previous
implementation actually worked correctly for most boards.
Fix the implementation to work correctly everywhere.
This fixes the vram width reported in the kernel log on
some boards.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ec6c7f802332d1eff16f03e7c757f1543ee1183 upstream.
[WHY]
New register field added in DP2.1 SCR, needed for auxless ALPM
[HOW]
Echo value read from 0xF0007 back to sink
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d411c8ccc0137a612e0044489030a194ff5c843 upstream.
In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode().
Add a check to avoid null pointer dereference.
Cc: stable@vger.kernel.org
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081029.2619437-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 996c3412a06578e9d779a16b9e79ace18125ab50 upstream.
CI has been sporadically reporting the following issue triggered by
igt@i915_selftest@live@hangcheck on ADL-P and similar machines:
<6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence
...
<6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<3> [414.070354] Unable to pin Y-tiled fence; err:-4
<3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active))
...
<4>[ 609.603992] ------------[ cut here ]------------
<2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301!
<4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1
<4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
<4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915]
<4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915]
...
<4>[ 609.604271] Call Trace:
<4>[ 609.604273] <TASK>
...
<4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915]
<4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915]
<4>[ 609.604977] force_unbind+0x24/0xa0 [i915]
<4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915]
<4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915]
<4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915]
<4>[ 609.605440] process_scheduled_works+0x351/0x690
...
In the past, there were similar failures reported by CI from other IGT
tests, observed on other platforms.
Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity
before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for
idleness of vma->active via fence_update(). That commit introduced
vma->fence->active in order for the fence_update() to be able to wait
selectively on that one instead of vma->active since only idleness of
fence registers was needed. But then, another commit 0d86ee35097a
("drm/i915/gt: Make fence revocation unequivocal") replaced the call to
fence_update() in i915_vma_revoke_fence() with only fence_write(), and
also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front.
No justification was provided on why we might then expect idleness of
vma->fence->active without first waiting on it.
The issue can be potentially caused by a race among revocation of fence
registers on one side and sequential execution of signal callbacks invoked
on completion of a request that was using them on the other, still
processed in parallel to revocation of those fence registers. Fix it by
waiting for idleness of vma->fence->active in i915_vma_revoke_fence().
Fixes: 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10021
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.8+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603195446.297690-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcfa48ff785bd121316592b131ff6531e3e696bb upstream.
Instead of using state->fb->obj[0] directly, get object from framebuffer
by calling drm_gem_fb_get_obj() and return error code when object is
null to avoid using null object of framebuffer.
Reported-by: Fusheng Huang <fusheng.huang@ecarxgroup.com>
Signed-off-by: Julia Zhang <Julia.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d92a7580392ad4681b1d4f9275d00b95375ebe01 upstream.
Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().
Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.
[ 3.536043] ------------[ cut here ]------------
[ 3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[ 3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[ 3.565455] Modules linked in:
[ 3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[ 3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[ 3.582452] Workqueue: events_unbound deferred_probe_work_func
[ 3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.595233] pc : __virt_to_phys+0x68/0x98
[ 3.599246] lr : __virt_to_phys+0x68/0x98
[ 3.603276] sp : ffff800083603990
[ 3.677939] Call trace:
[ 3.680393] __virt_to_phys+0x68/0x98
[ 3.684067] drm_fbdev_dma_helper_fb_probe+0x138/0x238
[ 3.689214] __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[ 3.695385] drm_fb_helper_initial_config+0x4c/0x68
[ 3.700264] drm_fbdev_dma_client_hotplug+0x8c/0xe0
[ 3.705161] drm_client_register+0x60/0xb0
[ 3.709269] drm_fbdev_dma_setup+0x94/0x148
Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().
Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Peng Fan (OSS) <peng.fan@oss.nxp.com>
Closes: https://lore.kernel.org/dri-devel/20240604080328.4024838-1-peng.fan@oss.nxp.com/
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdX3N0szUvt1VTbroa2zrT1Nye_VzPb5qqCZ7z5gSm7HGw@mail.gmail.com/
Fixes: a51c7663f144 ("drm/fb-helper: Consolidate CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20240617152843.11886-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66edf3fb331b6c55439b10f9862987b0916b3726 upstream.
In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625081828.2620794-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f2a129b33a2054e62273edd5a051c34c08d96e9 upstream.
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.
Fixes: 1c7a387ffef8 ("drm: Update file owner during use")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 74fa02c4a5ea1ade5156a6ce494d3ea83881c2d8 ]
Cache the PCI state before bus master is disabled. The saved state is
later used for other cases like restoring config space after mode-2
reset.
Fixes: 5c03e5843e6b ("drm/amdgpu:add smu mode1/2 support for aldebaran")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37ce99b77762256ec9fda58d58fd613230151456 ]
KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in
timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags.
This aligns display_timing with panel_desc.
Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ae6a233092747e9652eb793d92f79d0820e01c6a ]
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1] [2].
In this case, the memory allocated to store RADEONFB_CONN_LIMIT pointers
to "drm_connector" structures can be avoided. This is because this
memory area is never accessed.
Also, in the kzalloc function, it is preferred to use sizeof(*pointer)
instead of sizeof(type) due to the type of the variable can change and
one needs not change the former (unlike the latter).
At the same time take advantage to remove the "#if 0" block, the code
where the removed memory area was accessed, and the RADEONFB_CONN_LIMIT
constant due to now is never used.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ee7860cd8b5763017f8dc785c2851fecb7a0c565 ]
The ilitek-ili9881c controls the reset GPIO using the non-sleeping
gpiod_set_value() function. This complains loudly when the GPIO
controller needs to sleep. As the caller can sleep, use
gpiod_set_value_cansleep() to fix the issue.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240317154839.21260-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240317154839.21260-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f2703a3596a279b0be6eeed4c500bdbaa8dc3ce4 upstream.
why and how:
causes black screen on PNP on DCN 3.5
This reverts commit f30a3bea92bd ("drm/amd/display: Exit idle
optimizations before HDCP execution")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f0d576f840153392d04b2d52cf3adab8f62e8cb6 upstream.
Adds bounds check for sumo_vid_mapping_entry.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3392
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a498df5421fd737d11bfd152428ba6b1c8538321 upstream.
Adds bounds check for sumo_vid_mapping_entry.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 49cc17967be95d64606d5684416ee51eec35e84a upstream.
It's not possible to use the joiner at the same time with eDP MSO. When
a panel needs MSO, it's not optional, so MSO trumps joiner.
v3: Only change intel_dp_has_joiner(), leave debugfs alone (Ville)
Fixes: bc71194e8897 ("drm/i915/edp: enable eDP MSO during link training")
Cc: <stable@vger.kernel.org> # v5.13+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1668
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240614142311.589089-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8b5a92ca24eb96bb71e2a55e352687487d87687f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a421cc7a6a001b70415aa4f66024fa6178885a14 ]
There is a race condition in which a rendering job might take just long
enough to trigger the drm sched job timeout handler but also still
complete before the hard reset is done by the timeout handler.
This runs into race conditions not expected by the timeout handler.
In some very specific cases it currently may result in a refcount
imbalance on lima_pm_idle, with a stack dump such as:
[10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0
...
[10136.669628] Call trace:
[10136.669634] lima_devfreq_record_idle+0xa0/0xb0
[10136.669646] lima_sched_pipe_task_done+0x5c/0xb0
[10136.669656] lima_gp_irq_handler+0xa8/0x120
[10136.669666] __handle_irq_event_percpu+0x48/0x160
[10136.669679] handle_irq_event+0x4c/0xc0
We can prevent that race condition entirely by masking the irqs at the
beginning of the timeout handler, at which point we give up on waiting
for that job entirely.
The irqs will be enabled again at the next hard reset which is already
done as a recovery by the timeout handler.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-4-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49c13b4d2dd4a831225746e758893673f6ae961c ]
This is needed because we want to reset those devices in device-agnostic
code such as lima_sched.
In particular, masking irqs will be useful before a hard reset to
prevent race conditions.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405152951.1531555-2-nunes.erico@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f30a3bea92bdab398531129d187629fb1d28f598 ]
[WHY]
PSP can access DCN registers during command submission and we need
to ensure that DCN is not in PG before doing so.
[HOW]
Add a callback to DM to lock and notify DC for idle optimization exit.
It can't be DC directly because of a potential race condition with the
link protection thread and the rest of DM operation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 75800e2e4203ea83bbc9d4f63ad97ea582244a08 upstream.
After registering the audio component in i915_audio_component_init()
the audio driver may call i915_audio_component_get_power() via the
component ops. This could program AUD_FREQ_CNTRL with an uninitialized
value if the latter function is called before display.audio.freq_cntrl
gets initialized. The get_power() function also does a modeset which in
the above case happens too early before the initialization step and
triggers the
"Reject display access from task"
error message added by the Fixes: commit below.
Fix the above issue by registering the audio component only after the
initialization step.
Fixes: 87c1694533c9 ("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10291
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521143022.3784539-1-imre.deak@intel.com
(cherry picked from commit fdd0b80172758ce284f19fa8a26d90c61e4371d2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 43e2b37e2ab660c3565d4cff27922bc70e79c3f1 upstream.
In some scenarios, the DPT object gets shrunk but
the actual framebuffer did not and thus its still
there on the DPT's vm->bound_list. Then it tries to
rewrite the PTEs via a stale CPU mapping. This causes panic.
Cc: stable@vger.kernel.org
Reported-by: Shawn Lee <shawn.c.lee@intel.com>
Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt")
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[vsyrjala: Add TODO comment]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240520165634.1162470-1-vidya.srinivas@intel.com
(cherry picked from commit 51064d471c53dcc8eddd2333c3f1c1d9131ba36c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39bc27bd688066a63e56f7f64ad34fae03fbe3b8 upstream.
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap
allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag
causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem helpers.
It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset);
ptr[0] = 0;
Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240520100514.925681-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 70cb9188ffc75e643debf292fcddff36c9dbd4ae upstream.
The breadcrumbs use a GT wakeref for guarding the interrupt, but are
disarmed during release of the engine wakeref. This leaves a hole where
we may attach a breadcrumb just as the engine is parking (after it has
parked its breadcrumbs), execute the irq worker with some signalers still
attached, but never be woken again.
That issue manifests itself in CI with IGT runner timeouts while tests
are waiting indefinitely for release of all GT wakerefs.
<6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
<7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
...
<6> [299.356526] sysrq: Show State
...
<6> [299.373964] task:i915_selftest state:D stack:11784 pid:5578 tgid:5578 ppid:873 flags:0x00004002
<6> [299.373967] Call Trace:
<6> [299.373968] <TASK>
<6> [299.373970] __schedule+0x3bb/0xda0
<6> [299.373974] schedule+0x41/0x110
<6> [299.373976] intel_wakeref_wait_for_idle+0x82/0x100 [i915]
<6> [299.374083] ? __pfx_var_wake_function+0x10/0x10
<6> [299.374087] live_engine_busy_stats+0x9b/0x500 [i915]
<6> [299.374173] __i915_subtests+0xbe/0x240 [i915]
<6> [299.374277] ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
<6> [299.374369] ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
<6> [299.374456] intel_engine_live_selftests+0x1c/0x30 [i915]
<6> [299.374547] __run_selftests+0xbb/0x190 [i915]
<6> [299.374635] i915_live_selftests+0x4b/0x90 [i915]
<6> [299.374717] i915_pci_probe+0x10d/0x210 [i915]
At the end of the interrupt worker, if there are no more engines awake,
disarm the breadcrumb and go to sleep.
Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423165505.465734-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit fbad43eccae5cb14594195c20113369aabaa22b5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 799d4b392417ed6889030a5b2335ccb6dcf030ab upstream.
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0x98/0xe0
deferred_probe_work_func from process_one_work+0x240/0x6d0
process_one_work from worker_thread+0x1a0/0x3f4
worker_thread from kthread+0x104/0x138
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf0895fb0 to 0xf0895ff8)
...
irq event stamp: 82357
hardirqs last enabled at (82363): [<c01a96e8>] vprintk_emit+0x308/0x33c
hardirqs last disabled at (82368): [<c01a969c>] vprintk_emit+0x2bc/0x33c
softirqs last enabled at (81614): [<c0101644>] __do_softirq+0x320/0x500
softirqs last disabled at (81609): [<c012dfe0>] __irq_exit_rcu+0x130/0x184
---[ end trace 0000000000000000 ]---
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CRTC:70:crtc-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CONNECTOR:74:HDMI-A-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [PLANE:56:plane-5] commit wait timed out
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
Cc: stable@vger.kernel.org
Fixes: 13d5b040363c ("drm/exynos: do not return negative values from .get_modes()")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38e3825631b1f314b21e3ade00b5a4d737eb054e upstream.
The duplicated EDID is never freed. Fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
