summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
AgeCommit message (Collapse)Author
2017-03-31drm/vmwgfx: Plane atomic stateSinclair Yeh
Add plane state handling functions. We have to keep track of a few plane states so we cannot use the DRM helper for this. Created vmw_plane_state along with functions to reset, duplicate, and destroty it. v2 * Removed cursor clean up special case Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2017-03-31drm/vmwgfx: CRTC atomic stateSinclair Yeh
Create and Add CRTC state. We currently do not track any properties or custom states so we can technically use the DRM helpers. Creating this code just to make potential future additions easier. Most of the new code will be compiled but not enabled until plane/connector state handling code is also in place. This is the first of a series to enable atomic mode set for vmwgfx. The atomic enabling effort was done in collaboration with Thomas Hellstrom and the VMware Graphics Team. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Add universal plane supportSinclair Yeh
Universal support is prerequisite for atomic mode set. Explicitly create planes for the cursor and the primary FB. With a functional cursor plane, the DRM will no longer use the legacy cursor_set2 and cursor_move entry points. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2016-12-15drm: Nuke fb->bits_per_pixelVille Syrjälä
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Nuke fb->depthVille Syrjälä
Replace uses of fb->depth with fb->format->depth. Less duplicate information is a good thing. @@ struct drm_framebuffer *fb; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - fb->depth = E; ... } @@ struct nouveau_framebuffer *fb; @@ - fb->base.depth + fb->base.format->depth @@ struct drm_framebuffer fb; @@ - fb.depth + fb.format->depth @@ struct drm_framebuffer *fb; @@ - fb->depth + fb->format->depth @@ struct drm_framebuffer fb; @@ - (fb.format->depth) + fb.format->depth @@ struct drm_framebuffer *fb; @@ - (fb->format->depth) + fb->format->depth @@ @@ struct drm_framebuffer { ... - unsigned int depth; ... }; v2: Drop the vmw stuff (Daniel) Rerun spatch due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com
2016-08-16drm/kms: Nuke dirty_info propertyDaniel Vetter
It was added way back together with the dirty_fb ioctl, but neither generic xfree86-modesetting nor the vmware driver use it. Everyone is supposed to just unconditionally call the dirtyfb when they do frontbuffer rendering. And since unused uabi is bad uabi (there's reasons we require open source userspace for everything) let's nuke this. For reference see commit 884840aa3ce3214259e69557be5b4ce0d781ffa4 Author: Jakob Bornecrantz <jakob@vmware.com> Date: Thu Dec 3 23:25:47 2009 +0000 drm: Add dirty ioctl and property Cc: Jakob Bornecrantz <jakob@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-9-git-send-email-daniel.vetter@ffwll.ch
2016-03-14drm/vmwgfx: Calculate the cursor position based on the crtc gui originThomas Hellstrom
Base the cursor position on the coordinate of the crtc origin in the gui coordinate system rather than in the framebuffer coordinate system. With explicit placement, these may differ (for example when two crtcs scan out of the same framebuffer location). Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Add connector properties to switch between explicit and implicit ↵Thomas Hellstrom
placement Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2016-03-14drm/vmwgfx: Add suggested screen x and y connector propertiesThomas Hellstrom
Introduced by qxl, add these properties as a generic way to tell a display manager about the GUI layout. Also add the hotplug_mode_update_property which advises display managers to reread the mode list on a hotplug event. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2015-12-24Backmerge drm-fixes merge into Linus's tree into drm-next.Dave Airlie
This merges '5b726e06d6e8309e5c9ef4109a32caf27c71dfc8' into drm-next Just to resolve some merges to make Daniel's life easier. Signed-off-by: DAve Airlie <airlied@redhat.com>
2015-12-15drm/vmwgfx: Constify function pointer structsVille Syrjälä
Moves a bunch of junk to .rodata from .data. drivers/gpu/drm/vmwgfx/vmwgfx.ko: -.text 132244 +.text 132240 -.rodata 18296 +.rodata 18680 -.data 5096 +.data 4712 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-28-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-11drm: Pass 'name' to drm_encoder_init()Ville Syrjälä
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4; @@ drm_encoder_init(E1, E2, E3, E4 + ,NULL ) v2: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-08drm/vmwgfx: Drop dummy save/restore hooksDaniel Vetter
These hooks will be gone soon. Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-12-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Thierry Reding <treding@nvidia.com>
2015-12-08drm/vmwgfx: Implement the cursor_set2 callback v2Thomas Hellstrom
Fixes native drm clients like Fedora 23 Wayland which now appears to be able to use cursor hotspots without strange cursor offsets. Also fixes a couple of ignored error paths. Since the core drm cursor hotspot is incompatible with the legacy vmwgfx hotspot (the core drm hotspot is reset when the drm_mode_cursor ioctl is used), we need to keep track of both and add them when the device hotspot is set. We assume that either is always zero. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-08-12drm/vmwgfx: Fix copyright headersSinclair Yeh
Updating and fixing copyright headers. Bump version minor to signal vgpu10 support. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2015-08-05drm/vmwgfx: Kill a bunch of sparse warningsThomas Hellstrom
We're giving up all attempts to keep cpu- and device byte ordering separate. This silences sparse when compiled using make C=2 CF="-D__CHECK_ENDIAN__" Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-08-05drm/vmwgfx: Implement fbdev on kms v2Thomas Hellstrom
With screen targets the old legacy display system fbdev doesn't work satisfactory anymore. At best the resolution is severely restricted. Therefore implement fbdev on top of the kms system. With this change, fbdev will be using whatever KMS backend is chosen. There are helpers available for this, so in the future we'd probably want to implement the helper callbacks instead of calling into our KMS implementation directly. v2: Make sure we take the mode_config mutex around modesetting, Also clear the initial framebuffer using vzalloc instead of vmalloc. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-08-05vmwgfx: Major KMS refactoring / cleanup in preparation of screen targetsSinclair Yeh
Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-08-05 vmwgfx: Rework device initializationThomas Hellstrom
This commit reworks device initialization so that we always enable the FIFO at driver load, deferring SVGA enable until either first modeset or fbdev enable. This should always leave the fifo properly enabled for render- and control nodes. In addition, *) We disable the use of VRAM when SVGA is not enabled. *) We simplify PM support so that we only throw out resources on hibernate, not on suspend, since the device keeps its state on suspend. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2014-11-05drm: Move drm_crtc_init from drm_crtc.h to drm_plane_helper.hDaniel Vetter
Just a bit of OCD cleanup on headers - this function isn't the core interface any more but just a helper for drivers who haven't yet transitioned to universal planes. Put the declaration at the right spot and sprinkle necessary #includes over all drivers. Maybe this helps to encourage driver maintainers to do the switch. v2: Fix #include ordering for tegra, reported by 0-day builder. v3: Include required headers, reported by Thierry. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-06-19drm: add register and unregister functions for connectorsThomas Wood
Introduce generic functions to register and unregister connectors. This provides a common place to add and remove associated user space interfaces. Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01drm: Replace crtc fb with primary plane fb (v3)Matt Roper
Now that CRTC's have a primary plane, there's no need to track the framebuffer in the CRTC. Replace all references to the CRTC fb with the primary plane's fb. This patch was generated by the Coccinelle semantic patching tool using the following rules: @@ struct drm_crtc C; @@ - (C).fb + C.primary->fb @@ struct drm_crtc *C; @@ - (C)->fb + C->primary->fb v3: Generate patch via coccinelle. Actual removal of crtc->fb has been moved to a subsequent patch. v2: Fixup several lingering crtc->fb instances that were missed in the first patch iteration. [Rob Clark] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2013-12-04drm/vmwgfx: Add our connectors to sysfsThomas Hellstrom
Some user-space apps expects to find them there. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2013-12-04drm/vmwgfx: Correctly set the enabled state on crtcsThomas Hellstrom
Failure to do this would make the drm_mode_get_crtc ioctl return without crtc mode info, indicating that no mode was set. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2012-11-30drm/vmwgfx: drm_connector_property -> drm_object_propertyRob Clark
Signed-off-by: Rob Clark <rob@ti.com>
2012-02-13vmwgfx: Pick up the initial size from the width and height regsJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-21Merge remote-tracking branch 'pfdo/drm-fixes' into drm-core-nextDave Airlie
-next reported a messy merge, so I've merged my upstream pull into my -next tree. Conflicts: drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
2011-12-20drm: Replace pitch with pitches[] in drm_framebufferVille Syrjälä
Otherwise each driver would need to keep the information inside their own framebuffer object structure. Also add offsets[]. BOs on the other hand are driver specific, so those can be kept in driver specific structures. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-19vmwgfx: Resend the cursor after legacy modesetJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Infrastructure for explicit placementThomas Hellstrom
Make it possible to use explicit placement (although not hooked up with a user-space interface yet) and relax the single framebuffer limit to only apply to implicit placement. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-01vmwgfx: Use "Virtual" connectors and encoders rather than "LVDS".Thomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18vmwgfx: Whitespace & code style in display unitJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18vmwgfx: Fix display system init & close functionsJakob Bornecrantz
Make sure we null the display private, make sure we catch and handle vblank failing to init and don't call vblank_cleanup if we haven't initialized the display system. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-05vmwgfx: Add screen object supportJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-05vmwgfx: Refactor common display unit functions to shared fileJakob Bornecrantz
More preparation for Screen Object support. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-01vmwgfx: Print error diagnostics if depth doesn't match the host expectationMichel Dänzer
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-01vmwgfx: Add support for depth 8Michel Dänzer
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-01vmwgfx: Let SVGA_REG_NUM_DISPLAYS determine output connectivityThomas Hellstrom
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm: Mark constant arrays of drm_display_mode constChris Wilson
... and fixup some methods to accept the constant argument. Now that constant module arrays are loaded into read-only memory, using const appropriately has some benefits beyond warning the programmer about likely mistakes. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drivers/gpu/drm/vmwgfx: Fix k.alloc switched argumentsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/vmwgfx: Prune modes based on available VRAM sizeThomas Hellstrom
This needs to be reviewed once we support screen objects and don't rely on VRAM for the frame-buffer. Also fix some integer overflow issues pointed out by Michel Daenzer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01vmwgfx: Enable use of the vblank systemThomas Hellstrom
This is to avoid accessing uninitialized data during drm_irq_uninstall and vblank ioctls. At the same time, enable error check from drm_kms_init which previously appeared to ignore all errors. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-14drm: Use a nondestructive mode for output detect when polling (v2)Chris Wilson
v2: Julien Cristau pointed out that @nondestructive results in double-negatives and confusion when trying to interpret the parameter, so use @force instead. Much easier to type as well. ;-) And fix the miscompilation of vmgfx reported by Sedat Dilek. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-13drm: Use a nondestructive mode for output detect when pollingChris Wilson
Destructive load-detection is very expensive and due to failings elsewhere can trigger system wide stalls of up to 600ms. A simple first step to correcting this is not to invoke such an expensive and destructive load-detection operation automatically. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265 Reported-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-10drm: expand gamma_setJames Simmons
Expand the crtc_gamma_set function to accept a starting offset. The reason for this is to eventually use this function for setcolreg from drm_fb_helper.c. The fbdev colormap function can start at any offset in the color map. Signed-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03drm/vmwgfx: Allow userspace to change default layout. Bump minor.Jakob Bornecrantz
The host may change the layout and, since the change is communicated to the master, the master needs a way to communicate the change to the kernel driver. The minor version number is bumped to advertize the availability of this feature. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01drm/vmwgfx: Some modesetting cleanups and fixes.Jakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01drm/vmwgfx: Don't use SVGA_REG_ENABLE in modesetting code.Jakob Bornecrantz
We should not use SVGA_REG_ENABLE anywhere but in the fifo setup code, since it controls whether the device is active. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01drm/vmwgfx: Remove duplicate member from struct vmw_legacy_display_unit.Jakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01drm/vmwgfx: Support older hardware.Jakob Bornecrantz
V2: Fix a couple of typos. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 19:05:25 +0000