summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4
AgeCommit message (Collapse)Author
2018-09-29drm/vc4: Fix the "no scaling" case on multi-planar YUV formatsBoris Brezillon
commit 658d8cbd07dae22ccecf49399e18c609c4e85c53 upstream. When there's no scaling requested ->is_unity should be true no matter the format. Also, when no scaling is requested and we have a multi-planar YUV format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only set ->x_scaling[0] to VC4_SCALING_PPF. Doing this fixes an hardly visible artifact (seen when using modetest and a rather big overlay plane in YUV420). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06drm/vc4: Reset ->{x, y}_scaling[1] when dealing with uniplanar formatsBoris Brezillon
commit a6a00918d4ad8718c3ccde38c02cec17f116b2fd upstream. This is needed to ensure ->is_unity is correct when the plane was previously configured to output a multi-planar format with scaling enabled, and is then being reconfigured to output a uniplanar format. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16drm/vc4: Fix scaling of uni-planar formatsBoris Brezillon
commit 9a0e9802217291e54c4dd1fc5462f189a4be14ec upstream. When using uni-planar formats (like RGB), the scaling parameters are stored in plane 0, not plane 1. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29drm/vc4: Fix memory leak during BO teardownDaniel J Blueman
commit c0db1b677e1d584fab5d7ac76a32e1c0157542e0 upstream. During BO teardown, an indirect list 'uniform_addr_offsets' wasn't being freed leading to leaking many 128B allocations. Fix the memory leak by releasing it at teardown time. Cc: stable@vger.kernel.org Fixes: 6d45c81d229d ("drm/vc4: Add support for branching in shader validation.") Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180402071035.25356-1-daniel@quora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling ↵Christophe JAILLET
path [ Upstream commit d0b1d259a4b58b21a21ea82d7174bf7ea825e9cc ] If one 'drm_gem_handle_create()' fails, we leak somes handles and some memory. In order to fix it: - move the 'free(bo_state)' at the end of the function so that it is also called in the eror handling path. This has the side effect to also try to free it if the first 'kcalloc' fails. This is harmless. - add a new label, err_delete_handle, in order to delete already allocated handles in error handling path - remove the now useless 'err' label The way the code is now written will also delete the handles if the 'copy_to_user()' call fails. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03drm/vc4: Move IRQ enable to PM pathStefan Schake
[ Upstream commit ce9caf2f79a5aa170a4b6456a03db639eed9c988 ] We were calling enable_irq on bind, where it was already enabled previously by the IRQ helper. Additionally, dev->irq is not set correctly until after postinstall and so was always zero here, triggering a warning in 4.15. Fix both by moving the enable to the power management resume path, where we know there was a previous disable invocation during suspend. Fixes: 253696ccd613 ("drm/vc4: Account for interrupts in flight") Signed-off-by: Stefan Schake <stschake@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1514563543-32511-1-git-send-email-stschake@gmail.com Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03drm/vc4: Account for interrupts in flightStefan Schake
[ Upstream commit 253696ccd613fbdaa5aba1de44c461a058e0a114 ] Synchronously disable the IRQ to make the following cancel_work_sync invocation effective. An interrupt in flight could enqueue further overflow mem work. As we free the binner BO immediately following vc4_irq_uninstall this caused a NULL pointer dereference in the work callback vc4_overflow_mem_work. Link: https://github.com/anholt/linux/issues/114 Signed-off-by: Stefan Schake <stschake@gmail.com> Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1510275907-993-2-git-send-email-stschake@gmail.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.Eric Anholt
commit ca39b449f6d03e8235969f12f5dd25b8eb4304d6 upstream. If a CMA allocation failed, the partially constructed BO would be unreferenced through the normal path, and we might choose to put it in the BO cache. If we then reused it before it expired from the cache, the kernel would OOPS. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170301185602.6873-2-eric@anholt.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08drm/vc4: Allocate the right amount of space for boot-time CRTC state.Eric Anholt
commit 6d6e500391875cc372336c88e9a8af377be19c36 upstream. Without this, the first modeset would dereference past the allocation when trying to free the mm node. Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170328201343.4884-1-eric@anholt.net Fixes: d8dbf44f13b9 ("drm/vc4: Make the CRTCs cooperate on allocating display lists.") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-26drm/vc4: Use runtime autosuspend to avoid thrashing V3D power state.Eric Anholt
commit 3a62234680d86efa0239665ed8a0e908f1aef147 upstream. The pm_runtime_put() we were using immediately released power on the device, which meant that we were generally turning the device off and on once per frame. In many profiles I've looked at, that added up to about 1% of CPU time, but this could get worse in the case of frequent rendering and readback (as may happen in X rendering). By keeping the device on until we've been idle for a couple of frames, we drop the overhead of runtime PM down to sub-.1%. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-26drm/vc4: Fix termination of the initial scan for branch targets.Eric Anholt
commit 457e67a728696c4f8e6423c64e93def50530db9a upstream. The loop is scanning until the original max_ip (size of the BO), but we want to not examine any code after the PROG_END's delay slots. There was a block trying to do that, except that we had some early continue statements if the signal wasn't a PROG_END or a BRANCH. The failure mode would be that a valid shader is rejected because some undefined memory after the PROG_END slots is parsed as a branch and the rest of its setup is illegal. I haven't seen this in the wild, but valgrind was complaining when about this up in the userland simulator mode. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22drm/vc4: Fix ->clock_select setting for the VEC encoderBoris Brezillon
commit ab8df60e3a3b68420d0d4477c5f07c00fbfb078b upstream. PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and rework the vc4_set_crtc_possible_masks() to cover the full range of the PV_CONTROL_CLK_SELECT field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Eric Anholt <eric@anholt.net> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-22drm/vc4: Fix race between page flip completion event and clean-upDerek Foreman
commit 26fc78f6fef39b9d7a15def5e7e9826ff68303f4 upstream. There was a small window where a userspace program could submit a pageflip after receiving a pageflip completion event yet still receive EBUSY. Signed-off-by: Derek Foreman <derekf@osg.samsung.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Daniel Stone <daniels@collabora.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-01drm/vc4: fix a bounds checkDan Carpenter
commit 21ccc32496b2f63228f5232b3ac0e426e8fb3c31 upstream. We accidentally return success even if vc4_full_res_bounds_check() fails. Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Engestrom <eric@engestrom.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-01drm/vc4: Return -EINVAL on the overflow checks failing.Eric Anholt
commit 6b8ac63847bc2f958dd93c09edc941a0118992d9 upstream. By failing to set the errno, we'd continue on to trying to set up the RCL, and then oops on trying to dereference the tile_bo that binning validation should have set up. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-01drm/vc4: Fix an integer overflow in temporary allocation layout.Eric Anholt
commit 0f2ff82e11c86c05d051cae32b58226392d33bbf upstream. We copy the unvalidated ioctl arguments from the user into kernel temporary memory to run the validation from, to avoid a race where the user updates the unvalidate contents in between validating them and copying them into the validated BO. However, in setting up the layout of the kernel side, we failed to check one of the additions (the roundup() for shader_rec_offset) against integer overflow, allowing a nearly MAX_UINT value of bin_cl_size to cause us to under-allocate the temporary space that we then copy_from_user into. Reported-by: Murray McAllister <murray.mcallister@insomniasec.com> Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-01drm/vc4: Fix memory leak of the CRTC state.Eric Anholt
commit 7622b25543665567d8830a63210385b7d705924b upstream. The underscores variant frees the pointers inside, while the no-underscores variant calls underscores and then frees the struct. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: d8dbf44f13b9 ("drm/vc4: Make the CRTCs cooperate on allocating display lists.") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19drm/vc4: Fix a couple error codes in vc4_cl_lookup_bos()Dan Carpenter
commit b2cdeb19f16ad984eb5bb9193f793d05a8101511 upstream. If the allocation fails the current code returns success. If copy_from_user() fails it returns the number of bytes remaining instead of -EFAULT. Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-06drm/vc4: Add support for double-clocked modes.Eric Anholt
Now that we have infoframes to report the pixel repeat flag, we can start using it. Fixes locking the 720x480i and 720x576i modes on my Dell 2408WFP. Like the 1920x1080i case, they don't fit properly on the screen, though. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-06drm/vc4: Set up the AVI and SPD infoframes.Eric Anholt
Fixes a purple bar on the left side of the screen with my Dell 2408WFP. It will also be required for supporting the double-clocked video modes. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-06drm/vc4: Fix support for interlaced modes on HDMI.Eric Anholt
We really do need to be using the halved V fields. I had been confused by the code I was using as a reference because it stored halved vsync fields but not halved vdisplay, so it looked like I only needed to divide vdisplay by 2. This reverts part of Mario's timestamping fixes that prevented CRTC_HALVE_V from applying, and instead adjusts the timestamping code to not use the crtc field in that case. Fixes locking of 1920x1080x60i on my Dell 2408WFP. There are black bars on the top and bottom, but I suspect that might be an under/overscan flags problem as opposed to video timings. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-06drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes.Eric Anholt
Fixes occasional debug spew at boot when connected directly through HDMI, and probably confusing the HDMI state machine when we go trying to poke registers for the enable sequence too soon. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-06drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.Eric Anholt
On Pi0/1/2, we use an external GPIO line for hotplug detection, since the HDMI_HOTPLUG register isn't connected to anything. However, with the Pi3 the HPD GPIO line has moved off to a GPIO expander that will be tricky to get to (the firmware is constantly polling the expander using i2c0, so we'll need to coordinate with it). As a stop-gap, if we don't have a GPIO line, use an EDID probe to detect connection. Fixes HDMI display on the pi3. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-06drm/vc4: Enable limited range RGB output on HDMI with CEA modes.Eric Anholt
Fixes broken grayscale ramps on many HDMI monitors, where large areas at the ends of the ramp would all appear as black or white. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-10-06drm/vc4: Fix races when the CS reads from render targets.Eric Anholt
With the introduction of bin/render pipelining, the previous job may not be completed when we start binning the next one. If the previous job wrote our VBO, IB, or CS textures, then the binning stage might get stale or uninitialized results. Fixes the major rendering failure in glmark2 -b terrain. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Cc: stable@vger.kernel.org
2016-10-06drm/vc4: cleanup with list_first_entry_or_null()Masahiro Yamada
The combo of list_empty() check and return list_first_entry() can be replaced with list_first_entry_or_null(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-09-28Merge tag 'v4.8-rc8' into drm-nextDave Airlie
Linux 4.8-rc8 There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge it now to avoid troubles. * tag 'v4.8-rc8': (1442 commits) Linux 4.8-rc8 fault_in_multipages_readable() throws set-but-unused error mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing radix tree: fix sibling entry handling in radix_tree_descend() radix tree test suite: Test radix_tree_replace_slot() for multiorder entries fix memory leaks in tracing_buffers_splice_read() tracing: Move mutex to protect against resetting of seq data MIPS: Fix delay slot emulation count in debugfs MIPS: SMP: Fix possibility of deadlock when bringing CPUs online mm: delete unnecessary and unsafe init_tlb_ubc() huge tmpfs: fix Committed_AS leak shmem: fix tmpfs to handle the huge= option properly blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx MIPS: Fix pre-r6 emulation FPU initialisation arm64: kgdb: handle read-only text / modules arm64: Call numa_store_cpu_info() earlier. locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text nvme-rdma: only clear queue flags after successful connect i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended perf/core: Limit matching exclusive events to one PMU ...
2016-09-22drm: Don't swallow error codes in drm_dev_alloc()Tom Gundersen
There are many reasons other than ENOMEM that drm_dev_init() can fail. Return ERR_PTR rather than NULL to be able to distinguish these in the caller. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160921145919.13754-2-teg@jklm.no
2016-09-09drm/vc4: mark vc4_bo_cache_purge() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/gpu/drm/vc4/vc4_bo.c:147:6: warning: no previous prototype for 'vc4_bo_cache_purge' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-09-02Merge tag 'drm-vc4-next-2016-08-29' of https://github.com/anholt/linux into ↵Dave Airlie
drm-next This pull request brings in interlaced vblank timing and a 3D rendering memory/CPU overhead reduction. * tag 'drm-vc4-next-2016-08-29' of https://github.com/anholt/linux: drm/vc4: Don't force new binner overflow allocation per draw. drm/vc4: Enable/Disable vblanks properly in crtc en/disable. drm/vc4: Enable precise vblank timestamping for interlaced modes. drm/vc4: Reject doublescan modes. drm/vc4: Fix handling of interlaced video modes. drm/vc4: Disallow interlaced modes on DPI.
2016-08-30drm/vc4: Allow some more signals to be packed with uniform resets.Eric Anholt
The intent was to make sure people don't sneak in a small immediate or something to change the interpretation of the uniform update args, but these signals are just fine. Fixes a validation failure in the current X server on some Render operation. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-29drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commitLiu Ying
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter of the helper drm_atomic_helper_commit_planes() if the relevant display controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes when the CRTC is disabled. The helper would skip the ->atomic_disable call for a plane if the CRTC of the old plane state needs a modesetting operation. Of course, the drivers need to disable the planes in their CRTC disable callbacks since no one else would do that. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
2016-08-19drm/vc4: Don't force new binner overflow allocation per draw.Eric Anholt
This came from the initial bringup code, which always idled the GPU and always reset the overflow. That massively increases the size of the working set when you're doing lots of small draws, though, as is common on X desktops or piglit. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-19drm/vc4: Fix oops when userspace hands in a bad BO.Eric Anholt
We'd end up NULL pointer dereferencing because we didn't take the error path out in the parent. Fixes igt vc4_lookup_fail test. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Cc: stable@vger.kernel.org
2016-08-19drm/vc4: Fix overflow mem unreferencing when the binner runs dry.Eric Anholt
Overflow memory handling is tricky: While it's still referenced by the BPO registers, we want to keep it from being freed. When we are putting a new set of overflow memory in the registers, we need to assign the old one to the last rendering job using it. We were looking at "what's currently running in the binner", but since the bin/render submission split, we may end up with the binner completing and having no new job while the renderer is still processing. So, if we don't find a bin job at all, look at the highest-seqno (last) render job to attach our overflow to. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Cc: stable@vger.kernel.org
2016-08-19drm/vc4: Free hang state before destroying BO cache.Eric Anholt
The BO cache will complain if BOs are still allocated when we try to destroy it (since freeing those BOs would try to hit the cache). You could hit this if you were to unload the module after a GPU hang. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 214613656b51 ("drm/vc4: Add an interface for capturing the GPU state after a hang.")
2016-08-19drm/vc4: Fix handling of a pm_runtime_get_sync() success case.Eric Anholt
If the device was already up, a 1 is returned instead of 0. We were erroring out, leading the 3D driver to sometimes fail at screen initialization (generally with ENOENT returned to it). Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: af713795c59f ("drm/vc4: Add a getparam ioctl for getting the V3D identity regs.")
2016-08-19drm/vc4: Use drm_malloc_ab to fix large rendering jobs.Eric Anholt
If you exceeded the size that kmalloc would return, you'd get a dmesg warning and a return from the job submit. We can handle much allocations with vmalloc, and drm_malloc_ab makes that decision. Fixes failure in piglit's scissor-many. Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-19drm/vc4: Use drm_free_large() on handles to match its allocation.Eric Anholt
If you managed to exceed the limit to switch to vmalloc, we'd use the wrong free. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Cc: stable@vger.kernel.org
2016-08-19drm/vc4: Enable/Disable vblanks properly in crtc en/disable.Mario Kleiner
Add missing drm_crtc_vblank_on/off() calls so vblank irq handling/updating/timestamping never runs with a crtc shut down or during its shutdown/startup, as that causes large jumps in vblank count and trouble for compositors. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-19drm/vc4: Enable precise vblank timestamping for interlaced modes.Mario Kleiner
On top of the interlaced video mode fix and with some additional adjustments, this now works well. It has almost the same accuracy as on regular progressive scan modes. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-19drm/vc4: Reject doublescan modes.Mario Kleiner
We can't handle doublescan modes at the moment, so if userspace tries to set one, reject the mode set. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-19drm/vc4: Fix handling of interlaced video modes.Mario Kleiner
We must not apply CRTC_INTERLACE_HALVE_V to interlaced modes during mode enumeration, as drm_helper_probe_single_connector_modes does, so wrap it and reset the effect of CRTC_INTERLACE_HALVE_V on affected interlaced modes. Also mode_fixup interlaced modes passed in from user space. This fixes the vblank timestamping constants and entries in the mode->crtc_xxx fields needed for precise vblank timestamping. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-19drm/vc4: Disallow interlaced modes on DPI.Mario Kleiner
We already don't expose such modes to userspace, but make sure userspace can't sneak some interlaced mode in. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2016-08-19drm: Don't implement empty prepare_fb()/cleanup_fb()Laurent Pinchart
The plane .prepare_fb() and .cleanup_fb() helpers are optional, there's no need to implement empty stubs, and no need to explicitly set the function pointers to NULL either. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [danvet: Resolved conflicts with Chris' patch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-12drm/fb-helper: Add a dummy remove_conflicting_framebuffersDaniel Vetter
Lots of drivers don't properly compile without this when CONFIG_FB=n. It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when it's disabled I think it makes sense to add it to drm_fb_helper.h. Long term we probably need to rethink all the logic to unload firmware framebuffer drivers, at least if we want to be able to move away from CONFIG_FB and fbcon. v2: Unfortunately just stubbing out remove_conflicting_framebuffers in drm_fb_helper.h upset gcc about static vs. non-static declarations, so a new wrapper it needs to be. Means more churn :( Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: tomi.valkeinen@ti.com Cc: dh.herrmann@gmail.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
2016-07-19Merge remote-tracking branch 'airlied/drm-next' into topic/drm-miscDaniel Vetter
Backmerge drm-next to be able to apply Chris' connector_unregister_all cleanup (need latest i915 and sun4i state for that). Also there's a trivial conflict in ttm_bo.c that git rerere fails to remember. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-07-18drm/vc4: Delete unnecessary checks before two function callsMarkus Elfring
The following functions test whether their argument is NULL and then return immediately. * drm_fbdev_cma_hotplug_event * drm_fbdev_cma_restore_mode Thus the tests around their calls are not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/fb33d930-6a5c-c501-6676-26bd486f1cb5@users.sourceforge.net
2016-07-16Merge tag 'drm-vc4-next-2016-07-15' of https://github.com/anholt/linux into ↵Dave Airlie
drm-next This pull request brings in vc4 shader validation for branching, allowing GLSL shaders with non-unrolled loops. * tag 'drm-vc4-next-2016-07-15' of https://github.com/anholt/linux: drm/vc4: Fix a "the the" typo in a comment. drm/vc4: Fix definition of QPU_R_MS_REV_FLAGS drm/vc4: Add a getparam to signal support for branches. drm/vc4: Add support for branching in shader validation. drm/vc4: Add a bitmap of branch targets during shader validation. drm/vc4: Move validation's current/max ip into the validation struct. drm/vc4: Add a getparam ioctl for getting the V3D identity regs.
2016-07-15drm/vc4: Fix a "the the" typo in a comment.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 15:12:55 +0000