summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4/vc4_hdmi.c
AgeCommit message (Collapse)Author
2021-02-09drm/vc4: hdmi: Don't register the CEC adapter if there's no interruptsMaxime Ripard
We introduced the BCM2711 support to the vc4 HDMI controller with 5.10, but this was lacking any of the interrupts of the CEC controller so we have to deal with the backward compatibility. Do so by simply ignoring the CEC setup if the DT doesn't have the interrupts property. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-13-maxime@cerno.tech (cherry picked from commit 4d03ed7ad731a2cf922fa37246fb7068a52f18ff) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Remove cec_available flagDom Cobley
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech (cherry picked from commit f551863af919edd60f76a24126da3ac10294ace1) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Support BCM2711 CEC interrupt setupMaxime Ripard
The HDMI controller found in the BCM2711 has an external interrupt controller for the CEC and hotplug interrupt shared between the two instances. Let's add a variant flag to register a single interrupt handler and deals with the interrupt handler setup, or two interrupt handlers relying on an external irqchip. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech (cherry picked from commit ad6380e9aaf459c22006c73fd3d4dd6f41e8f048) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Split the interrupt handlersMaxime Ripard
The BCM2711 has two different interrupt sources to transmit and receive CEC messages, provided through an external interrupt chip shared between the two HDMI interrupt controllers. The rest of the CEC controller is identical though so we need to change a bit the code organisation to share the code as much as possible, yet still allowing to register independent handlers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech (cherry picked from commit 0c38490a031071c0d81b400949f43ea6f4b0cd8f) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Introduce a CEC clockMaxime Ripard
While the BCM2835 had the CEC clock derived from the HSM clock, the BCM2711 has a dedicated parent clock for it. Let's introduce a separate clock for it so that we can handle both cases. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-9-maxime@cerno.tech (cherry picked from commit cd7f016c93b697dea79a884162cbf7311283fe12) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Update the CEC clock divider on HSM rate changeMaxime Ripard
As part of the enable sequence we might change the HSM clock rate if the pixel rate is different than the one we were already dealing with. On the BCM2835 however, the CEC clock derives from the HSM clock so any rate change will need to be reflected in the CEC clock divider to output 40kHz. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech (cherry picked from commit a9dd0b9a5c3e11c79e6ff9c7fdf07c471732dcb6) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Compute the CEC clock divider from the clock rateMaxime Ripard
The CEC clock divider needs to output a frequency of 40kHz from the HSM rate on the BCM2835. The driver used to have a fixed frequency for it, but that changed for the BCM2711 and we now need to compute it dynamically to maintain the proper rate. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech (cherry picked from commit f1ceb9d10043683b89e5e5e5848fb4e855295762) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Restore cec physical address on reconnectDom Cobley
Currently we call cec_phys_addr_invalidate on a hotplug deassert. That may be due to a TV power cycling, or an AVR being switched on (and switching edid). This makes CEC unusable since our controller wouldn't have a physical address anymore. Set it back up again on the hotplug assert. Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech (cherry picked from commit b06eecb5158e5f3eb47b9d05aea8c259985cc5f7) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Fix register offset with longer CEC messagesDom Cobley
The code prior to 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") was relying on the fact that the register offset was incremented by 4 for each readl call. That worked since the register width is 4 bytes. However, since that commit the HDMI_READ macro is now taking an enum, and the offset doesn't increment by 4 but 1 now. Divide the index by 4 to fix this. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-4-maxime@cerno.tech (cherry picked from commit e9c9481f373eb7344f9e973eb28fc6e9d0f46485) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Move hdmi reset to bindDom Cobley
The hdmi reset got moved to a later point in the commit 9045e91a476b ("drm/vc4: hdmi: Add reset callback"). However, the reset now occurs after vc4_hdmi_cec_init and so tramples the setup of registers like HDMI_CEC_CNTRL_1 This only affects pi0-3 as on pi4 the cec registers are in a separate block Fixes: 9045e91a476b ("drm/vc4: hdmi: Add reset callback") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-3-maxime@cerno.tech (cherry picked from commit 7155334f15f360f5c98391c5c7e12af4c13395c4) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-01-25Merge tag 'v5.11-rc5' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-01-18drm/vc4: Unify PCM card's driver_nameNicolas Saenz Julienne
User-space ALSA matches a card's driver name against an internal list of aliases in order to select the correct configuration for the system. When the driver name isn't defined, the match is performed against the card's name. With the introduction of RPi4 we now have two HDMI ports with two distinct audio cards. This is reflected in their names, making them different from previous RPi versions. With this, ALSA ultimately misses the board's configuration on RPi4. In order to avoid this, set "card->driver_name" to "vc4-hdmi" unanimously. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Fixes: f437bc1ec731 ("drm/vc4: drv: Support BCM2711") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210115191209.12852-1-nsaenzjulienne@suse.de
2020-12-16drm/vc4: hdmi: Enable 10/12 bpc outputMaxime Ripard
The BCM2711 supports higher bpc count than just 8, so let's support it in our driver. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-10-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Limit the BCM2711 to the max without scramblingMaxime Ripard
Unlike the previous generations, the HSM clock limitation is way above what we can reach without scrambling, so let's move the maximum frequency we support to the maximum clock frequency without scrambling. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-9-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Use the connector state pixel rate for the PHYMaxime Ripard
The PHY initialisation parameters are not based on the pixel clock but the TMDS clock rate which can be the pixel clock in the standard case, but could be adjusted based on some parameters like the bits per color. Since the TMDS clock rate is stored in our custom connector state already, let's reuse it from there instead of computing it again. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-8-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Store pixel frequency in the connector stateMaxime Ripard
The pixel rate is for now quite simple to compute, but with more features (30 and 36 bits output, YUV output, etc.) will depend on a bunch of connectors properties. Let's store the rate we have to run the pixel clock at in our custom connector state, and compute it in atomic_check. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-7-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Create a custom connector stateMaxime Ripard
When run with a higher bpc than 8, the clock of the HDMI controller needs to be adjusted. Let's create a connector state that will be used at atomic_check and atomic_enable to compute and store the clock rate associated to the state. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-6-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Don't access the connector state in reset if kmalloc failsMaxime Ripard
drm_atomic_helper_connector_reset uses kmalloc which, from an API standpoint, can fail, and thus setting connector->state to NULL. However, our reset hook then calls drm_atomic_helper_connector_tv_reset that will access connector->state without checking if it's a valid pointer or not. Make sure we don't end up accessing a NULL pointer. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-5-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Take into account the clock doubling flag in atomic_checkMaxime Ripard
Commit 63495f6b4aed ("drm/vc4: hdmi: Make sure our clock rate is within limits") was intended to compute the pixel rate to make sure we remain within the boundaries of what the hardware can provide. However, unlike what mode_valid was checking for, we forgot to take into account the clock doubling flag that can be set for modes. Let's honor that flag if it's there. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Fixes: 63495f6b4aed ("drm/vc4: hdmi: Make sure our clock rate is within limits") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-4-maxime@cerno.tech
2020-12-16drm/vc4: Pass the atomic state to encoder hooksMaxime Ripard
We'll need to access the connector state in our encoder setup, so let's just pass the whole DRM state to our private encoder hooks. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-3-maxime@cerno.tech
2020-12-15Merge drm/drm-next into drm-misc-nextMaarten Lankhorst
Required backmerge since we will be based on top of v5.11, and there has been a request to backmerge already to upstream some features. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-12-14Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...
2020-12-07drm/vc4: hdmi: Don't poll for the infoframes status on setupMaxime Ripard
The infoframes are sent at a regular interval as a data island packet, so we don't need to wait for them to be sent when we're setting them up. However, we do need to poll when we're enabling since the we can't update the packet RAM until it has been sent. Let's add a boolean flag to tell whether we want to poll or not to support both cases. Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxime@cerno.tech
2020-11-19drm/vc4: hdmi: Disable Wifi FrequenciesMaxime Ripard
There's cross-talk on the RPi4 between the 2.4GHz channels used by the WiFi chip and some resolutions, most notably 1440p at 60Hz. In such a case, we can either reject entirely the mode, or lower slightly the pixel frequency to remove the overlap. Let's go for the latter. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201029134018.1948636-2-maxime@cerno.tech
2020-11-19drm/vc4: hdmi: Block odd horizontal timingsMaxime Ripard
The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels per clock cycle, and cannot deal with odd timings. Let's reject any mode with such timings. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-2-maxime@cerno.tech
2020-11-19drm/vc4: hdmi: Make sure our clock rate is within limitsMaxime Ripard
The HDMI controller cannot go above a certain pixel rate limit depending on the generations, but that limit is only enforced in mode_valid at the moment, which means that we won't advertise modes that exceed that limit, but the userspace is still free to try to setup a mode that would. Implement atomic_check to make sure we check it in that scenario too. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201029122522.1917579-1-maxime@cerno.tech
2020-11-18drm/vc4/vc4_hdmi: Remove set but unused variable 'ret'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/vc4/vc4_hdmi.c: In function ‘vc4_hdmi_set_audio_infoframe’: drivers/gpu/drm/vc4/vc4_hdmi.c:334:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201116174112.1833368-39-lee.jones@linaro.org
2020-10-29drm/vc4: hdmi: Add a name to the codec DAI componentMaxime Ripard
Since the components for a given device in ASoC are identified by their name, it makes sense to add one even though it's not strictly necessary. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708144555.718404-1-maxime@cerno.tech
2020-10-27drm/vc4: hdmi: Avoid sleeping in atomic contextMaxime Ripard
When running the trigger hook, ALSA by default will take a spinlock, and thus will run the trigger hook in atomic context. However, our HDMI driver will send the infoframes as part of the trigger hook, and part of that process is to wait for a bit to be cleared for up to 100ms. To be nicer to the system, that wait has some usleep_range that interact poorly with the atomic context. There's several ways we can fix this, but the more obvious one is to make ALSA take a mutex instead by setting the nonatomic flag on the DAI link. That doesn't work though, since now the cyclic callback installed by the dmaengine helpers in ALSA will take a mutex, while that callback is run by dmaengine's virt-chan code in a tasklet where sleeping is not allowed either. Given the delay we need to poll the bit for, changing the usleep_range for a udelay and keep running it from a context where interrupts are disabled is not really a good option either. However, we can move the infoframe setup code in the hw_params hook, like is usually done in other HDMI controllers, that isn't protected by a spinlock and thus where we can sleep. Infoframes will be sent on a regular basis anyway, and since hw_params is where the audio parameters that end up in the infoframes are setup, this also makes a bit more sense. Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201027101558.427256-1-maxime@cerno.tech
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-09-10drm/vc4: hdmi: Fix NULL vs IS_ERR() checks in vc5_hdmi_init_resources()Dan Carpenter
The devm_ioremap() function never returns error pointers, it returns NULL. Fixes: 8323989140f3 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200910100825.GC79916@mwanda
2020-09-09drm/vc4/vc4_hdmi: fill ASoC card ownerMarek Szyprowski
card->owner is a required property and since commit 81033c6b584b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200701073949.28941-1-m.szyprowski@samsung.com
2020-09-07drm/vc4: hdmi: Support the BCM2711 HDMI controllersMaxime Ripard
Now that the driver is ready for it, let's bring in the HDMI controllers variants for the BCM2711. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b540c7a9ebb7ad51da39271a8388b69c7e27e582.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add pixel BVB clock controlHoegeun Kwon
The BCM2711 has another clock that needs to be ramped up depending on the pixel rate: the pixel BVB clock. Add the code to adjust that clock when changing the mode. [Maxime: Changed the commit log, used clk_set_min_rate] Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20200901040759.29992-3-hoegeun.kwon@samsung.com Link: https://patchwork.freedesktop.org/patch/msgid/d757ddd6549da140f178563e5fd2bf1d129913fd.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Switch to blank pixels when disabledMaxime Ripard
In order to avoid pixels getting stuck in an unflushable FIFO, we need when we disable the HDMI controller to switch away from getting our pixels from the pixelvalve and instead use blank pixels, and switch back to the pixelvalve when we enable the HDMI controller. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/fde3efb1ad79f4476a73d310cbba3ec07dc6dabe.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Do the VID_CTL configuration at onceMaxime Ripard
The VID_CTL setup is done in several places in the driver even though it's not really required. Let's simplify it a bit to do the configuration in one go. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/08e7ebb605a560fcc149b69b4af52753a7870b2f.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Implement finer-grained hooksMaxime Ripard
In order to prevent some pixels getting stuck in an unflushable FIFO on bcm2711, we need to enable the HVS, the pixelvalve (the CRTC) and the HDMI controller (the encoder) in an intertwined way, and with tight delays. However, the atomic callbacks don't really provide a way to work with either constraints, so we need to roll our own callbacks so that we can provide those guarantees. Since those callbacks have been implemented and called in the CRTC code, we can just implement them in the HDMI driver now. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/2e9226d971117065f3b97e597f04f7fe2f0c134c.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Always recenter the HDMI FIFOMaxime Ripard
In order to avoid a pixel getting stuck in an unflushable FIFO, we need to recenter the FIFO every time we're doing a modeset and not only if we're connected to an HDMI monitor. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/b3faaf05ac6c4d3c364d28fa441571eb85903269.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove register dumps in enableMaxime Ripard
The current code has some logic, disabled by default, to dump the register setup in the HDMI controller. However, since we're going to split those functions in multiple, shorter, functions that only make sense where they are called in sequence, keeping the register dump makes little sense. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/c8c8d388f2d32fc3536336be36d003a862487eb7.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Deal with multiple ALSA cardsMaxime Ripard
The HDMI driver was registering a single ALSA card so far with the name vc4-hdmi. Obviously, this is not going to work anymore when we will have multiple HDMI controllers since we will end up trying to register two files with the same name. Let's use the variant to avoid that name conflict. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/e60a37444e848a384a45707a21d6df8883115f86.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add audio-related callbacksDave Stevenson
The audio configuration has changed for the BCM2711, with notably a different parent clock and a different channel configuration. Make that modular to be able to support the BCM2711. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/85a8ca721c2d800be758c55870cea98536749680.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default.Dave Stevenson
ALSA's iec958 plugin by default sets the block start preamble to 8, whilst this driver was programming the hardware to expect 0xF. Amend the hardware config to match ALSA. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/d0b126deb228baf1244c91e02ac0a8f7c9c60dc5.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streamingDave Stevenson
If the encoder is disabled and re-enabled (eg mode change) all infoframes are reset, whilst the audio subsystem know nothing about this change. The driver therefore needs to reinstate the audio infoframe for itself. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/cd579ccc2c9b9d2fce0ebaf32f847cedb0e4a7a2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registersDave Stevenson
The register range used for audio setup in the previous generations of SoC were always the second range in the device tree. However, now that the BCM2711 has way more register ranges, it makes sense to retrieve it by names for it, while preserving the id-based lookup as a fallback. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://patchwork.freedesktop.org/patch/msgid/a1ba5605fe1006a1ead5262ef3d66ea5d0750381.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Use clk_set_min_rate insteadMaxime Ripard
The HSM clock needs to be running at 101% the pixel clock of the HDMI controller, however it's shared between the two HDMI controllers, which means that if the resolutions are different between the two HDMI controllers, and the lowest resolution is on the second (in enable order) controller, the first HDMI controller will end up with a smaller than expected clock rate. Since we don't really need an exact frequency there, we can simply change the minimum rate we expect instead. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/821992209cc0d7a83254bf26fe2bf507ef0994d2.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rateMaxime Ripard
The HSM clock needs to be setup at around 101% of the pixel rate. This was done previously by setting the clock rate to 163.7MHz at probe time and only check in mode_valid whether the mode pixel clock was under the pixel clock +1% or not. However, with 4k we need to change that frequency to a higher frequency than 163.7MHz, and yet want to have the lowest clock as possible to have a decent power saving. Let's change that logic a bit by setting the clock rate of the HSM clock to the pixel rate at encoder_enable time. This would work for the BCM2711 that support 4k resolutions and has a clock that can provide it, but we still have to take care of a 4k panel plugged on a BCM283x SoCs that wouldn't be able to use those modes, so let's define the limit in the variant. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7e692ddc231d33dd671e70ea04dd1dcf56c1ecb3.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Rename drm_encoder pointer in mode_validMaxime Ripard
The mode_valid hook on the encoder uses a pointer to a drm_encoder called crtc, which is pretty confusing. Let's rename it to encoder to make it clear what it is. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/7fbabab03992efe4a3a3640ac5ee2bb49b1c7338.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV defineMaxime Ripard
The CEC_CLOCK_DIV define is not used anywhere in the driver, let's remove it. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/53805cc47e99a137e5f08c92fb781cc2e2134299.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Add CEC support flagMaxime Ripard
Similarly to the audio support, CEC support is not there yet for the BCM2711, so let's skip entirely the CEC initialization through a variant flag. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/bd0c4afa83b4e121692352cdc2dd1886162c7552.1599120059.git-series.maxime@cerno.tech
2020-09-07drm/vc4: hdmi: Move CEC init to its own functionMaxime Ripard
The CEC init code was put directly into the bind function, which was quite inconsistent with how the audio support was done, and would prevent us from further changes to skip that initialisation entirely. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/21f4717e076291522d0784a7fd3774d8e97eaf01.1599120059.git-series.maxime@cerno.tech
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 09:06:02 +0000