| Age | Commit message (Collapse) | Author |
|---|
|
Add a dedicated CRTC state to ofdrm to later store information for
palette updates.
v3:
* rework CRTC state helpers (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
|
|
Open Firmware provides basic display output via the 'display' node.
DT platform code already provides a device that represents the node's
framebuffer. Add a DRM driver for the device. The display mode and
color format is pre-initialized by the system's firmware. Runtime
modesetting via DRM is not possible. The display is useful during
early boot stages or as error fallback.
Similar functionality is already provided by fbdev's offb driver,
which is insufficient for modern userspace. The old driver includes
support for BootX device tree, which can be found on old 32-bit
PowerPC Macintosh systems. If these are still in use, the
functionality can be added to ofdrm or implemented in a new
driver. As with simpledrm, the fbdev driver cannot be selected if
ofdrm is already enabled.
Two notable points about the driver:
* Reading the framebuffer aperture from the device tree is not
reliable on all systems. Ofdrm takes the heuristics and a comment
from offb to pick the correct range.
* No resource management may be tied to the underlying PCI device.
Otherwise the handover to the native driver will fail with a resource
conflict. PCI management is therefore done as part of the platform
device's cleanup.
The driver has been tested on qemu's ppc64le emulation. The device
hand-over has been tested with bochs.
v5:
* use drm_atomic_helper_check_crtc_primary_plane()
v4:
* set preferred depth to the correct value
* set bpp value for console emulation
* output scanout-buffer parameters with drm_dbg()
v3:
* reintegrate FWFB helpers into ofdrm
* use damage iterator
* sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access()
* fix various atomic_check helpers
* remove CRTC atomic_{enable,disable} (Javier)
* compute stride with drm_format_info_min_pitch() (Daniel)
v2:
* removed simple-pipe helpers
* built driver on top of FWFB helpers
* merged all init code into single function
* make PCI support optional (Michal)
* support COMPILE_TEST (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
convert
Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
|
|
Provides a default CRTC state check handler for CRTCs that only have one
primary plane attached.
There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a CRTC helper and
make drivers use it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-5-javierm@redhat.com
|
|
There's no need to add planes to the atomic state. Remove the call
to drm_atomic_add_affected_planes() from simpledrm.
On full modesets, the DRM helpers already add a CRTC's planes to the
atomic state; see drm_atomic_helper_check_modeset(). There's no reason
to call drm_atomic_add_affected_planes() unconditionally in the CRTC's
atomic_check() in simpledrm. It's also too late, as the atomic_check()
of the added planes will not be called before the commit.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221011165136.469750-3-javierm@redhat.com
|
|
Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.
Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.
v5:
* rebase on top of udl changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
|
|
Synchronize CPU access to GEM BOs with other drivers when updating the
screen buffer. Imported buffers might otherwise contain stale data.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-6-tzimmermann@suse.de
|
|
Iterate over all damage clips and updated them one by one. Replaces
the merging of damage areas, which can result in significant overhead
if damage areas are not close to each other.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-5-tzimmermann@suse.de
|
|
The primary plane implements atomic_disable, so atomic_update will
not be called without a framebuffer set. Remove the test for !fb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-4-tzimmermann@suse.de
|
|
Lookup the plane's state in atomic_update with the helper
drm_atomic_get_new_plane_state(). Also rename the helpers'
state arguments. No functional changes.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-3-tzimmermann@suse.de
|
|
If not given, compute the stride with drm_format_info_min_pitch(). It's
the standard helper for this purpose.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: fd9e3169e42b ("drm/simpledrm: Compute framebuffer stride if not set")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220922130944.27138-2-tzimmermann@suse.de
|
|
Provides a default plane state check handler for primary planes that are a
fullscreen scanout buffer and whose state scale and position can't change.
There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a plane helper and
make drivers use it.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913162307.121503-1-javierm@redhat.com
|
|
Add drm_fb_build_fourcc_list() function that builds a list of supported
formats from native and emulated ones. Helpful for all drivers that do
format conversion as part of their plane updates. Update current caller.
v3:
* improve warnings on ignored formats (Sam)
v2:
* use u32 instead of uint32_t (Sam)
* print a warning if output array is too small (Sam)
* comment fixes (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-5-tzimmermann@suse.de
|
|
The macro DRM_MODE_INIT() initializes an instance of
struct drm_display_mode with typical parameters. Convert simpledrm
and also update the macro DRM_SIMPLE_MODE().
v3:
* fix DRM_MODE_INIT() docs (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-4-tzimmermann@suse.de
|
|
Add drm_crtc_helper_mode_valid_fixed(), which validates a given mode
against a display hardware's mode. Convert simpledrm and use it in a
few other drivers with static modes.
v4:
* remove empty line after opening brace
v2:
* rename 'static' and 'hw' to 'fixed' everywhere
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-3-tzimmermann@suse.de
|
|
Add drm_connector_helper_get_modes_fixed(), which duplicates a single
display mode for a connector. Convert drivers.
v2:
* rename 'static' and 'hw' to 'fixed' everywhere
* fix typo 'there' to 'their' (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905141648.22013-2-tzimmermann@suse.de
|
|
VGA_IS1_RC is the color mode register (VGA_IS1_RM the one for monochrome
mode, note C vs. M at the end). So when using VGA_IS1_RC make sure the
vga device is actually in color mode and set the corresponding bit in the
misc register.
Reproducible when booting VMs in UEFI mode with some edk2 versions (edk2
fix is on the way too). Doesn't happen in BIOS mode because in that
case the vgabios already flips the bit.
Fixes: 250e743915d4 ("drm/bochs: Add screen blanking support")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20220906142957.2763577-1-kraxel@redhat.com
|
|
Update XRGB8888-to-MONO conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* rebase after renaming CMA helpers to DMA helpers
* update documentation (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-13-tzimmermann@suse.de
|
|
Update XRGB8888-to-GRAY8 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-12-tzimmermann@suse.de
|
|
Update XRGB8888-to-RGB888 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-8-tzimmermann@suse.de
|
|
Update XRGB8888-to-RGB565 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* update new Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-7-tzimmermann@suse.de
|
|
Merge drm_fb_memcpy() and drm_fb_memcpy_toio() into a drm_fb_memcpy()
that uses struct iosys_map for buffers. The new function also supports
multi-plane color formats. Convert all users of the original helpers.
v2:
* rebase onto refactored mgag200
* use drm_formap_info_bpp() (Sam)
* do static init in hyperv and mgag200 (Sam)
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-4-tzimmermann@suse.de
|
|
Provide drm_fb_blit() that works with struct iosys_map. Update all
users of drm_fb_blit_toio(), which required a destination buffer in
I/O memory.
This patch only updates the function's interface. The implementation
still relies on the destination buffer to be located in I/O memory.
See the follow-up patches for implementational changes. The new
function's interface works with multi-plane color formats, but again
implementation only supports a single plane for now.
v2:
* rebase onto refactored simpledrm
* use IOSYS_MAP_INIT_VADDR() (Sam)
* update the commit message on the use of I/O memory (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-3-tzimmermann@suse.de
|
|
Replace the simple-KMS helpers with the regular atomic helpers. The
regular helpers are better architectured and therefore allow for easier
code sharing among drivers. No functional changes.
v3:
* remove empty CRTC helpers atomic_{enable, disable} (Javier)
* unconditionally run drm_atomic_helper_check_plane_state()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-6-tzimmermann@suse.de
|
|
Compute the framebuffer's scanline stride length if not given by
the simplefb data.
v3:
* get pixel size from drm_format_info_bpp() (Geert, Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-5-tzimmermann@suse.de
|
|
Replace the remaining uses of the field pdev by upcasts from the Linux
device and remove the field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-4-tzimmermann@suse.de
|
|
Inline the helpers for initializing the hardware FB, the memory
management and the modesetting into the device-creation function.
No functional changes.
In the original code, init helpers depended on values from other
init helpers. Inlining the functions ensures that steps are taken
in the correct order. It's also easier to see what happens. The
device is simple enough to be set up in one function. Only clocks
and regulators are still set up in their own helpers, as their
presence is system dependent.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-3-tzimmermann@suse.de
|
|
Remove the unused mem field from struct simpledrm_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220801135028.30647-2-tzimmermann@suse.de
|
|
When booting a kernel compiled with clang's CFI protection
(CONFIG_CFI_CLANG), there is a CFI failure in
drm_simple_kms_crtc_mode_valid() when trying to call
simpledrm_simple_display_pipe_mode_valid() through ->mode_valid():
[ 0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8):
...
[ 0.324928] Call trace:
[ 0.324969] __ubsan_handle_cfi_check_fail+0x58/0x60
[ 0.325053] __cfi_check_fail+0x3c/0x44
[ 0.325120] __cfi_slowpath_diag+0x178/0x200
[ 0.325192] drm_simple_kms_crtc_mode_valid+0x58/0x80
[ 0.325279] __drm_helper_update_and_validate+0x31c/0x464
...
The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs'
expects a return type of 'enum drm_mode_status', not 'int'. Correct it
to fix the CFI failure.
Cc: stable@vger.kernel.org
Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1647
Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
(cherry picked from commit 0c09bc33aa8e9dc867300acaadc318c2f0d85a1e)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The field paddr of struct drm_gem_dma_object holds a DMA address, which
might actually be a physical address. However, depending on the platform,
it can also be a bus address or a virtual address managed by an IOMMU.
Hence, rename the field to dma_addr, which is more applicable.
In order to do this renaming the following coccinelle script was used:
```
@@
struct drm_gem_dma_object *gem;
@@
- gem->paddr
+ gem->dma_addr
@@
struct drm_gem_dma_object gem;
@@
- gem.paddr
+ gem.dma_addr
@exists@
typedef dma_addr_t;
symbol paddr;
@@
dma_addr_t paddr;
<...
- paddr
+ dma_addr
...>
@@
symbol paddr;
@@
dma_addr_t
- paddr
+ dma_addr
;
```
This patch is compile-time tested with:
```
make ARCH={x86_64,arm,arm64} allyesconfig
make ARCH={x86_64,arm,arm64} drivers/gpu/drm`
```
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
|
|
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the
hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM
DMA" seems to be more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
# Rename all 'cma_obj's to 'dma_obj'.
for ff in $(grep -RiHl "cma_obj" $DIRS)
do
sed -i -E "s/cma_obj/dma_obj/g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "GEM CMA", but not "FB CMA".
Also drivers/gpu/drm/Makefile was fixed up manually after renaming
drm_gem_cma_helper.c to drm_gem_dma_helper.c.
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
|
|
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy
of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be
more applicable.
Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")
requests to rename the CMA helpers and implies that people seem to be
confused about the naming.
In order to do this renaming the following script was used:
```
#!/bin/bash
DIRS="drivers/gpu include/drm Documentation/gpu"
REGEX_SYM_UPPER="[0-9A-Z_\-]"
REGEX_SYM_LOWER="[0-9a-z_\-]"
REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)"
REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)"
REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g"
REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g"
# Find all upper case 'CMA' symbols and replace them with 'DMA'.
for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS)
do
sed -i -E "$REGEX_SED_UPPER" $ff
done
# Find all lower case 'cma' symbols and replace them with 'dma'.
for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS)
do
sed -i -E "$REGEX_SED_LOWER" $ff
done
# Replace all occurrences of 'CMA' / 'cma' in comments and
# documentation files with 'DMA' / 'dma'.
for ff in $(grep -RiHl " cma " $DIRS)
do
sed -i -E "s/ cma / dma /g" $ff
sed -i -E "s/ CMA / DMA /g" $ff
done
```
Only a few more manual modifications were needed, e.g. reverting the
following modifications in some DRM Kconfig files
- select CMA if HAVE_DMA_CONTIGUOUS
+ select DMA if HAVE_DMA_CONTIGUOUS
as well as manually picking the occurrences of 'CMA'/'cma' in comments and
documentation which relate to "FB CMA", but not "GEM CMA".
This patch is compile-time tested building a x86_64 kernel with
`make allyesconfig && make drivers/gpu/drm`.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
|
|
The remove() function calls bochs_hw_fini() but this function is not called
in the error handling of the probe.
This call releases the resources allocated by bochs_hw_init() used in
bochs_load().
Update the probe and bochs_load() to call bochs_hw_fini() if an error
occurs after a successful bochs_hw_init() call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: http://patchwork.freedesktop.org/patch/msgid/0e676e4d56ab5b10fcf22860081414445611dfa7.1655565953.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de
|
|
drm_crtc.h has no need for drm_frambuffer.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_framebuffer.h.
Quite a few placs do currently depend on drm_framebuffer.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up msm some more
v2: Deal with ingenic and shmobile as well
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_crtc.h has no need for drm_edid.h, so don't include it.
Avoids useless rebuilds of the entire universe when
touching drm_edid.h.
Quite a few placs do currently depend on drm_edid.h without
actually including it directly. All of those need to be fixed
up.
v2: Fix up i915 and msm some more
v3: Fix alphabetical ordering (Sam)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Instead of relying on it getting pulled in indirectly.
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20220413161259.1854270-1-michel@daenzer.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that the st7735r.ko module won't autoload if
a DT has a node with a compatible "okaya,rh128128t" string.
In that case, kmod expects a "MODALIAS=of:N*T*Cokaya,rh128128t" uevent but
instead will get a "MODALIAS=spi:rh128128t", which is not present in the
list of aliases:
$ modinfo drivers/gpu/drm/tiny/st7735r.ko | grep alias
alias: of:N*T*Cokaya,rh128128tC*
alias: of:N*T*Cokaya,rh128128t
alias: of:N*T*Cjianda,jd-t18003-t01C*
alias: of:N*T*Cjianda,jd-t18003-t01
alias: spi:jd-t18003-t01
To workaround this issue, add in the SPI table an entry for that device.
Fixes: d1d511d516f7 ("drm: tiny: st7735r: Add support for Okaya RH128128T")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520091602.179078-1-javierm@redhat.com
|
|
Don't select shadow buffering for the fbdev console explicitly. The
fbdev emulation's heuristic will enable it for any framebuffer with
.dirty callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303205839.28484-2-tzimmermann@suse.de
|
|
Let's start the 5.19 development cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Pull drm updates from Dave Airlie:
"Lots of work all over, Intel improving DG2 support, amdkfd CRIU
support, msm new hw support, and faster fbdev support.
dma-buf:
- rename dma-buf-map to iosys-map
core:
- move buddy allocator to core
- add pci/platform init macros
- improve EDID parser deep color handling
- EDID timing type 7 support
- add GPD Win Max quirk
- add yes/no helpers to string_helpers
- flatten syncobj chains
- add nomodeset support to lots of drivers
- improve fb-helper clipping support
- add default property value interface
fbdev:
- improve fbdev ops speed
ttm:
- add a backpointer from ttm bo->ttm resource
dp:
- move displayport headers
- add a dp helper module
bridge:
- anx7625 atomic support, HDCP support
panel:
- split out panel-lvds and lvds bindings
- find panels in OF subnodes
privacy:
- add chromeos privacy screen support
fb:
- hot unplug fw fb on forced removal
simpledrm:
- request region instead of marking ioresource busy
- add panel oreintation property
udmabuf:
- fix oops with 0 pages
amdgpu:
- power management code cleanup
- Enable freesync video mode by default
- RAS code cleanup
- Improve VRAM access for debug using SDMA
- SR-IOV rework special register access and fixes
- profiling power state request ioctl
- expose IP discovery via sysfs
- Cyan skillfish updates
- GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates
- expose benchmark tests via debugfs
- add module param to disable XGMI for testing
- GPU reset debugfs register dumping support
amdkfd:
- CRIU support
- SDMA queue fixes
radeon:
- UVD suspend fix
- iMac backlight fix
i915:
- minimal parallel submission for execlists
- DG2-G12 subplatform added
- DG2 programming workarounds
- DG2 accelerated migration support
- flat CCS and CCS engine support for XeHP
- initial small BAR support
- drop fake LMEM support
- ADL-N PCH support
- bigjoiner updates
- introduce VMA resources and async unbinding
- register definitions cleanups
- multi-FBC refactoring
- DG1 OPROM over SPI support
- ADL-N platform enabling
- opregion mailbox #5 support
- DP MST ESI improvements
- drm device based logging
- async flip optimisation for DG2
- CPU arch abstraction fixes
- improve GuC ADS init to work on aarch64
- tweak TTM LRU priority hint
- GuC 69.0.3 support
- remove short term execbuf pins
nouveau:
- higher DP/eDP bitrates
- backlight fixes
msm:
- dpu + dp support for sc8180x
- dp support for sm8350
- dpu + dsi support for qcm2290
- 10nm dsi phy tuning support
- bridge support for dp encoder
- gpu support for additional 7c3 SKUs
ingenic:
- HDMI support for JZ4780
- aux channel EDID support
ast:
- AST2600 support
- add wide screen support
- create DP/DVI connectors
omapdrm:
- fix implicit dma_buf fencing
vc4:
- add CSC + full range support
- better display firmware handoff
panfrost:
- add initial dual-core GPU support
stm:
- new revision support
- fb handover support
mediatek:
- transfer display binding document to yaml format.
- add mt8195 display device binding.
- allow commands to be sent during video mode.
- add wait_for_event for crtc disable by cmdq.
tegra:
- YUV format support
rcar-du:
- LVDS support for M3-W+ (R8A77961)
exynos:
- BGR pixel format for FIMD device"
* tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits)
drm/i915/display: Do not re-enable PSR after it was marked as not reliable
drm/i915/display: Fix HPD short pulse handling for eDP
drm/amdgpu: Use drm_mode_copy()
drm/radeon: Use drm_mode_copy()
drm/amdgpu: Use ternary operator in `vcn_v1_0_start()`
drm/amdgpu: Remove pointless on stack mode copies
drm/amd/pm: fix indenting in __smu_cmn_reg_print_error()
drm/amdgpu/dc: fix typos in comments
drm/amdgpu: fix typos in comments
drm/amd/pm: fix typos in comments
drm/amdgpu: Add stolen reserved memory for MI25 SRIOV.
drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations.
drm/amdkfd: evict svm bo worker handle error
drm/amdgpu/vcn: fix vcn ring test failure in igt reload test
drm/amdgpu: only allow secure submission on rings which support that
drm/amdgpu: fixed the warnings reported by kernel test robot
drm/amd/display: 3.2.177
drm/amd/display: [FW Promotion] Release 0.0.108.0
drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2
drm/amd/display: Wait for hubp read line for Pollock
...
|
|
There is no "reversed" handling in drm_fb_xrgb8888_to_mono_reversed():
the function just converts from color to grayscale, and reduces the
number of grayscale levels from 256 to 2 (i.e. brightness 0-127 is
mapped to 0, 128-255 to 1). All "reversed" handling is done in the
repaper driver, where this function originated.
Hence make this clear by renaming drm_fb_xrgb8888_to_mono_reversed() to
drm_fb_xrgb8888_to_mono(), and documenting the black/white pixel
mapping.
Fixes: bcf8b616deb87941 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-2-geert@linux-m68k.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.
Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
zpos in plane state reset, removing the need for individual drivers
to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.
Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
|
|
Add a driver that will work with most MIPI DBI compatible SPI panels.
This avoids adding a driver for every new MIPI DBI compatible controller
that is to be used by Linux. The 'compatible' Device Tree property with
a '.bin' suffix will be used to load a firmware file that contains the
controller configuration.
Example (driver will load sainsmart18.bin):
display@0 {
compatible = "sainsmart18", "panel-mipi-dbi-spi";
...
};
v5:
- kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam)
- kconfig: Add select VIDEOMODE_HELPERS (Sam)
- kconfig: Add wiki url in the description (Sam)
- Split out and use of_get_drm_panel_display_mode()(Sam)
- Only use the first compatible to look for a firmware file since the
binding mandates 2 compatibles.
- Make having a firmware file mandatory so we can print an error
message if it's missing to improve the user experience. It's very
unlikely that a controller doesn't need to be initialized and if
it doesn't, it's possible to have a firmware file containing only
a DCS NOP.
v4:
- Move driver to drm/tiny where the other drivers of its kind are located.
The driver module will not be shared with a future DPI driver after all.
v3:
- Move properties to DT (Maxime)
- The MIPI DPI spec has optional support for DPI where the controller is
configured over DBI. Rework the command functions so they can be moved
to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver
v2:
- Drop model property and use compatible instead (Rob)
- Add wiki entry in MAINTAINERS
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220227124713.39766-6-noralf@tronnes.org
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
|
|
There is now a drm_fb_xrgb8888_to_mono_reversed() helper function to do
format conversion from XRGB8888 to reversed monochrome.
Use that helper and remove the open coded version in the repaper driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223193735.213185-1-javierm@redhat.com
|
|
panels
Some devices use e.g. a portrait panel in a standard laptop casing made
for landscape panels. efifb calls drm_get_panel_orientation_quirk() and
sets fb_info.fbcon_rotate_hint to make fbcon rotate the console so that
it shows up-right instead of on its side.
When switching to simpledrm the fbcon renders on its side. Call the
drm_connector_set_panel_orientation_with_quirk() helper to add
a "panel orientation" property on devices listed in the quirk table,
to make the fbcon (and aware userspace apps) rotate the image to
display properly.
Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221220045.11958-1-hdegoede@redhat.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Cross-subsystem Changes:
------------------------
dma-buf:
- dma-buf-map: Rename to iosys-map (Lucas)
Core Changes:
-------------
drm:
- Always include the debugfs_entry in drm_crtc (Ville)
- Add orientation quirk for GPD Win Max (Anisse)
Driver Changes:
---------------
gvt:
- Constify some pointers. (Rikard Falkeborn)
- Use list_entry to access list members. (Guenter Roeck)
- Fix cmd parser error for Passmark9. (Zhenyu Wang)
i915:
- Various clean-ups including headers and removing unused and unnecessary stuff\
(Jani, Hans, Andy, Ville)
- Cleaning up on our registers definitions i915_reg.h (Matt)
- More multi-FBC refactoring (Ville)
- Baytrail backlight fix (Hans)
- DG1 OPROM read through SPI controller (Clint)
- ADL-N platform enabling (Tejas)
- Fix slab-out-of-bounds access (Jani)
- Add opregion mailbox #5 support for possible EDID override (Anisse)
- Fix possible NULL dereferences (Harish)
- Updates and fixes around display voltage swing values (Clint, Jose)
- Fix RPM wekeref on PXP code (Juston)
- Many register definitions clean-up, including planes registers (Ville)
- More conversion towards display version over the old gen (Madhumitha, Ville)
- DP MST ESI handling improvements (Jani)
- drm device based logging conversions (Jani)
- Prevent divide by zero (Dan)
- Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville)
- Async flip optimization for DG2 (Stanislav)
- Multiple DSC and bigjoiner fixes and improvements (Ville)
- Fix ADL-P TypeC Phy ready status readout (Imre)
- Fix up DP DFP 4:2:0 handling more display related fixes (Ville)
- Display M/N cleanup (Ville)
- Switch to use VGA definitions from video/vga.h (Jani)
- Fixes and improvements to abstract CPU architecture (Lucas)
- Disable unsused power wells left enabled by BIOS (Imre)
- Allow !join_mbus cases for adlp+ dbuf configuration (Ville)
- Populate pipe dbuf slices more accurately during readout (Ville)
- Workaround broken BIOS DBUF configuration on TGL/RKL (Ville)
- Fix trailing semicolon (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
|
|
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rename struct dma_buf_map to struct iosys_map and corresponding APIs.
Over time dma-buf-map grew up to more functionality than the one used by
dma-buf: in fact it's just a shim layer to abstract system memory, that
can be accessed via regular load and store, from IO memory that needs to
be acessed via arch helpers.
The idea is to extend this API so it can fulfill other needs, internal
to a single driver. Example: in the i915 driver it's desired to share
the implementation for integrated graphics, which uses mostly system
memory, with discrete graphics, which may need to access IO memory.
The conversion was mostly done with the following semantic patch:
@r1@
@@
- struct dma_buf_map
+ struct iosys_map
@r2@
@@
(
- DMA_BUF_MAP_INIT_VADDR
+ IOSYS_MAP_INIT_VADDR
|
- dma_buf_map_set_vaddr
+ iosys_map_set_vaddr
|
- dma_buf_map_set_vaddr_iomem
+ iosys_map_set_vaddr_iomem
|
- dma_buf_map_is_equal
+ iosys_map_is_equal
|
- dma_buf_map_is_null
+ iosys_map_is_null
|
- dma_buf_map_is_set
+ iosys_map_is_set
|
- dma_buf_map_clear
+ iosys_map_clear
|
- dma_buf_map_memcpy_to
+ iosys_map_memcpy_to
|
- dma_buf_map_incr
+ iosys_map_incr
)
@@
@@
- #include <linux/dma-buf-map.h>
+ #include <linux/iosys-map.h>
Then some files had their includes adjusted and some comments were
update to remove mentions to dma-buf-map.
Since this is not specific to dma-buf anymore, move the documentation to
the "Bus-Independent Device Accesses" section.
v2:
- Squash patches
v3:
- Fix wrong removal of dma-buf.h from MAINTAINERS
- Move documentation from dma-buf.rst to device-io.rst
v4:
- Change documentation title and level
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
|
|
First backmerge into drm-misc-next. Required for more helpers backmerged,
and to pull in 5.17 (rc2).
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
