summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/r600.c
AgeCommit message (Collapse)Author
2010-11-23drm/radeon/kms: move r7xx/evergreen to its own vram_gtt setup functionAlex Deucher
MC_VM_FB_LOCATION is at a different offset between r6xx and r7xx/evergreen. The location is needed for vram setup on fusion chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/kms/radeon: Reorder vblank and pageflip interrupt handling.Mario Kleiner
In the vblank irq handler, calls to actual vblank handling, or at least drm_handle_vblank(), need to happen before calls to radeon_crtc_handle_flip(). Reason: The high precision pageflip timestamping and some other pageflip optimizations will need the updated vblank count and timestamps for the current vblank interval. These are calculated in drm_handle_vblank(), therefore it must go first. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/radeon/kms: add pageflip ioctl support (v3)Alex Deucher
This adds support for dri2 pageflipping. v2: precision updates from Mario Kleiner. v3: Multihead fixes from Mario Kleiner; missing crtc offset add note about update pending bit on pre-avivo chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms: fix alignment when allocating buffersAlex Deucher
We were previously dropping alignment requests on the floor when allocating buffers so we always ended up page aligned. Certain tiling modes on 6xx+ require larger alignment which wasn't happening before. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <j.glisse@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drm/radeon/kms: fix thermal sensor reporting on rv6xxAlex Deucher
Temperature is not shifted as on newer asics. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-09drivers/gpu/drm: Update WARN usesJoe Perches
Coalesce long formats. Align arguments. Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-26drm/radeon/kms: properly compute group_size on 6xx/7xxAlex Deucher
Needed for tiled surfaces. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-19Merge branch 'drm-fixes' of /home/airlied/kernel/linux-2.6 into drm-core-nextDave Airlie
Conflicts: drivers/gpu/drm/i915/intel_fb.c drivers/gpu/drm/radeon/r600_blit_kms.c drivers/gpu/drm/ttm/ttm_bo.c
2010-10-12drm/radeon/kms: leave certain CP int bits enabledAlex Deucher
These bits are used for internal communication and should be left enabled. This may fix s/r issues on some systems. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-12drm/radeon/kms: avoid corner case issue with unmappable vram V2Jerome Glisse
We should not allocate any object into unmappable vram if we have no means to access them which on all GPU means having the CP running and on newer GPU having the blit utility working. This patch limit the vram allocation to visible vram until we have acceleration up and running. Note that it's more than unlikely that we run into any issue related to that as when acceleration is not woring userspace should allocate any object in vram beside front buffer which should fit in visible vram. V2 use real_vram_size as mc_vram_size could be bigger than the actual amount of vram [airlied: fixup r700_cp_stop case] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms/r6xx+: use new style fencing (v3)Alex Deucher
On r6xx+ a newer fence mechanism was implemented to replace the old wait_until plus scratch regs setup. A single EOP event will flush the destination caches, write a fence value, and generate an interrupt. This is the recommended fence mechanism on r6xx+ asics. This requires my previous writeback patch. v2: fix typo that enabled event fence checking on all asics rather than just r6xx+. v3: properly enable EOP interrupts Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=29972 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: enable writeback (v2)Alex Deucher
When writeback is enabled, the GPU shadows writes to certain registers into a buffer in memory. The driver can then read the values from the shadow rather than reading back from the register across the bus. Writeback can be disabled by setting the no_wb module param to 1. On r6xx/r7xx/evergreen, the following registers are shadowed: - CP scratch registers - CP read pointer - IH write pointer On r1xx-rr5xx, the following registers are shadowed: - CP scratch registers - CP read pointer v2: - Combine wb patches for r6xx-evergreen and r1xx-r5xx - Writeback is disabled on AGP boards since it tends to be unreliable on AGP using the gart. - Check radeon_wb_init return values properly. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: clean up r6xx/r7xx blit init (v2)Alex Deucher
Move common code to init function. v2: make sure the bo is pinned after init as well. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idleAlex Deucher
radeon_gem_wait_idle_ioctl can apparently get called prior to the vram page being set up or even if accel if false, so make sure it's valid before using it. Should fix: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597636 https://bugs.freedesktop.org/show_bug.cgi?id=29834 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-24drm: radeon cleanup fixes...Daniel J Blueman
Fix string interpreted as trigraph and typo. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-07drm/radeon/kms/evergreen: fix gpu hangs in userspace accel codeAlex Deucher
These VGT regs need to be programmed via the ring rather than MMIO as on previous asics (r6xx/r7xx). Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-02drm/radeon/kms: remove useless clock codeAlex Deucher
This code was originally for forcing some clocks on certain asics. However, this code was later moved to asic specific functions for all of the affected asics. The only users of the original code at this point were r600, rv770, and evergreen and the code was not relevant for those asics. So, remove it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30drm/radeon/kms: fix a regression on r7xx AGP due to the HDP flush fixAlex Deucher
commit: 812d046915f48236657f02c06d7dc47140e9ceda drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush breaks on AGP boards since there is no VRAM gart table. This patch fixes the issue by creating a VRAM scratch page so that can be used on both AGP and PCIE. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29834 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: move a bunch of modesetting debug to correct debug usage.Dave Airlie
This migrates a bunch of DRM_DEBUG->DRM_DEBUG_KMS so we can get more modesetting related info without all the other ioctl handling easily. Also the PM code moves to DRM_DEBUG_DRIVER mostly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms/r7xx: add workaround for hw issue with HDP flushAlex Deucher
Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain situations. Add workaround. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02Merge tag 'v2.6.35-rc6' into drm-radeon-nextDave Airlie
Need this to avoid conflicts with future radeon fixes
2010-08-02drm/radeon/kms/r6xx+: add query for tile config (v2)Alex Deucher
Userspace needs this information to access tiled buffers via the CPU. v2: rebased on evergreen accel changes Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02drm/radeon/kms: add support for internal thermal sensors (v3)Alex Deucher
rv6xx/rv7xx/evergreen families supported; older asics did not have an internal thermal sensor. Note, not all oems use the internal thermal sensor, so it's only exposed in cases where it is used. Note also, that most laptops use an oem specific ACPI solution for GPU thermal information rather than using the internal thermal sensor directly. v2: export millidegrees celsius, use hwmon device properly. v3: fix Kconfig Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-16drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asicsAlex Deucher
The asics in question have the following requirements with regard to their gart setups: 1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31 2. The GART aperture MC base has to be aligned to a boundary equal to the size of the aperture. 3. The GART page table has to be aligned to the boundary equal to the size of the table. 4. The GART page table size is: table_entry_size * (aperture_size / page_size) 5. The GART page table has to be allocated in non-paged, non-cached, contiguous system memory. This patch takes care 2. The rest should already be handled properly. This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-07Merge branch 'drm-platform' into drm-testingDave Airlie
* drm-platform: drm: Make sure the DRM offset matches the CPU drm: Add __arm defines to DRM drm: Add support for platform devices to register as DRM devices drm: Remove drm_resource wrappers
2010-07-01drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm modeAlex Deucher
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28745 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2)Alex Deucher
Some IGP systems specify the system memory clock in the Firmware table rather than the IGP info table. Check both and make sure we have a value system memory clock value. v2: make sure rs690_pm_info is called on rs780/rs880 as well. fixes a regression since 07d4190327b02ab3aaad25a2d168f79d92e8f8c2. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-01drm/radeon/kms: Force HDP_NONSURF to maximum sizeJerome Glisse
HDP non surface should cover the whole VRAM but we were misscomputing the size and we endup in some case not covering the VRAM at all (if VRAM size were > 1G). Covering more than the VRAM size shouldn't be an issue. Fix : https://bugs.freedesktop.org/show_bug.cgi?id=28016 [airlied: add evergreen fix] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms: add trivial debugging for voltageRafał Miłecki
agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/r600+: use voltage from requested clock mode (v3)Rafał Miłecki
This fixes FDO bug #28375, it's kind of regression, so quite important to have it for .35. V2: Fix on RV770+ as well. All other chipsets have only one clock mode per state. V3: I'm out of luck today. Grepped for voltage in r*.c and missed evergreen. agd5f: rebased Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: track current voltage (v2)Alex Deucher
track the current voltage level and avoid setting it if the requested voltage is already set. v2: check voltage type before checking current voltage Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08drm/radeon/kms/pm: add mid profileAlex Deucher
This adds an additional profile, mid, to the pm profile code which takes the place of the old low profile. The default behavior remains the same, e.g., auto profile now selects between mid and high profiles based on power source, however, you can now manually force the low profile which was previously only available as a dpms off state. Enabling the low profile when the displays are on has been known to cause display corruption in some cases. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-03drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)Alex Deucher
- This enables voltage adjustment on r6xx+ and certain r5xx asics. - Voltage drop support is already available for most r1xx-r5xx asics. V2: endian fix for voltage table. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01drm: Remove drm_resource wrappersJordan Crouse
Remove the drm_resource wrappers and directly use the actual PCI and/or platform functions in their place. [airlied: fixup nouveau properly to build] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-21drm/radeon/kms/pm/r600: select the mid clock mode for single head low profileAlex Deucher
This saves some more power at the expense of performance. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: fix r6xx+ profile setupAlex Deucher
This patch is a combination of the previous two profile patches, but without the index bugs. It cleans up and fixes some issues with pm profile setup on r6xx chips. Some tables have different orderings for the power states, also, r600 only has 1 clock mode per power state. On desktop cards there are no battery modes, so the low and high power states are the same. For the low profile case, choose the lower clock mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: make pm spam debug onlyAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: rework power managementAlex Deucher
- Separate dynpm and profile based power management methods. You can select the pm method by echoing the selected method ("dynpm" or "profile") to power_method in sysfs. - Expose basic 4 profile in profile method "default" - default clocks "auto" - select between low and high based on ac/dc state "low" - DC, low power mode "high" - AC, performance mode The current base profile is "default", but it should switched to "auto" once we've tested on more systems. Switching the state is a matter of echoing the requested profile to power_profile in sysfs. The lowest power states are selected automatically when dpms turns the monitors off in all states but default. - Remove dynamic fence-based reclocking for the moment. We can revisit this later once we have basic pm in. - Move pm init/fini to modesetting path. pm is tightly coupled with display state. Make sure display side is initialized before pm. - Add pm suspend/resume functions to make sure pm state is properly reinitialized on resume. - Remove dynpm module option. It's now selectable via sysfs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: add support for no display power statesAlex Deucher
The lowest power states often cause display problems, so only enable them when all displays are off. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms: more pm fixesAlex Deucher
- disable gui idle interrupt use Seems to hang some r5xx chips - move vbl range check into existing vbl check function in radeon_pm.c - disable crtc mc acccess for the whole reclocking process Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18radeon: Try harder to ensure we reclock in vblankMatthew Garrett
The vblank interrupt on r600 doesn't seem to be especially reliable, so perform some sanity checks before the actual reclock. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18radeon: Enable memory reclockong on r600Matthew Garrett
With luck, dynamic memory reclocking on r600 should be stable with the previous patches. Enable it. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: rework power managementAlex Deucher
Add two new sysfs attributes: - dynpm - power_state Echoing 0/1 to dynpm disables/enables dynamic power management. The driver scales the sclk dynamically based on the number of queued fences. dynpm only scales sclk dynamically in single head mode. Echoing x.y to power_state selects a static power state (x) and clock mode (y). This allows you to statically select a power state and clock mode. Selecting a static clock mode will disable dynpm. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: add additional asic callbacksAlex Deucher
- pm_misc() - handles voltage, pcie lanes, and other non clock related power mode settings. Currently disabled. Needs further debugging - pm_prepare() - disables crtc mem requests right now. All memory clients need to be disabled when changing memory clocks. This function can be expanded to include disabling fb access as well. - pm_finish() - enable active memory clients. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: restore default power state on exitAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms: minor pm cleanupsAlex Deucher
- remove non_clock_info struct - track power state misc flags Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)Alex Deucher
This also simplifies the code and enables reclocking with multiple heads active by tracking whether the power states are single or multi-head capable. Eventually, we will want to select a power state based on external factors (AC/DC state, user selection, etc.). (v2) Update for evergreen Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms/pm: add asic specific callbacks for setting power state (v2)Alex Deucher
(v2) Add evergreen vbl checks Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms: add support for gui idle interrupts (v4)Alex Deucher
Useful for certain power management operations. You need to wait for the GUI engine (2D, 3D, CP, etc.) to be idle before changing clocks or adjusting engine parameters. (v2) Fix gui idle enable on pre-r6xx asics (v3) The gui idle interrrupt status bit is permanently asserted on pre-r6xx chips, but the interrrupt is still generated. workaround it in the driver. (v4) Add support for evergreen Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18drm/radeon/kms: add gui_idle callbackAlex Deucher
Check to see if the GUI engine and related blocks (2D, 3D, CP, etc) are idle or not. There are a number of cases when we need to know if the drawing engine is busy. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 09:26:46 +0000