summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel
AgeCommit message (Collapse)Author
2025-05-18drm/panel: simple: Update timings for AUO G101EVN010Kevin Baker
[ Upstream commit 7c6fa1797a725732981f2d77711c867166737719 ] Switch to panel timings based on datasheet for the AUO G101EVN01.0 LVDS panel. Default timings were tested on the panel. Previous mode-based timings resulted in horizontal display shift. Signed-off-by: Kevin Baker <kevinb@ventureresearch.com> Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-05-02drm: panel: jd9365da: fix reset signal polarity in unprepareHugo Villeneuve
commit 095c8e61f4c71cd4630ee11a82e82cc341b38464 upstream. commit a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") fixed reset signal polarity in jadard_dsi_probe() and jadard_prepare(). It was not done in jadard_unprepare() because of an incorrect assumption about reset line handling in power off mode. After looking into the datasheet, it now appears that before disabling regulators, the reset line is deasserted first, and if reset_before_power_off_vcioo is true, then the reset line is asserted. Fix reset polarity by inverting gpiod_set_value() second argument in in jadard_unprepare(). Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel") Fixes: 2b976ad760dc ("drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel") Fixes: a8972d5a49b4 ("drm: panel: jd9365da-h3: fix reset signal polarity") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250417195507.778731-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-10drm/panel: ilitek-ili9882t: fix GPIO name in error messageJohn Keeping
[ Upstream commit 4ce2c7e201c265df1c62a9190a98a98803208b8f ] This driver uses the enable-gpios property and it is confusing that the error message refers to reset-gpios. Use the correct name when the enable GPIO is not found. Fixes: e2450d32e5fb5 ("drm/panel: ili9882t: Break out as separate driver") Signed-off-by: John Keeping <jkeeping@inmusicbrands.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-27drm: panel: jd9365da-h3: fix reset signal polarityHugo Villeneuve
commit a8972d5a49b408248294b5ecbdd0a085e4726349 upstream. In jadard_prepare() a reset pulse is generated with the following statements (delays ommited for clarity): gpiod_set_value(jadard->reset, 1); --> Deassert reset gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms gpiod_set_value(jadard->reset, 1); --> Deassert reset However, specifying second argument of "0" to gpiod_set_value() means to deassert the GPIO, and "1" means to assert it. If the reset signal is defined as GPIO_ACTIVE_LOW in the DTS, the above statements will incorrectly generate the reset pulse (inverted) and leave it asserted (LOW) at the end of jadard_prepare(). Fix reset behavior by inverting gpiod_set_value() second argument in jadard_prepare(). Also modify second argument to devm_gpiod_get() in jadard_dsi_probe() to assert the reset when probing. Do not modify it in jadard_unprepare() as it is already properly asserted with "1", which seems to be the intended behavior. Fixes: 6b818c533dd8 ("drm: panel: Add Jadard JD9365DA-H3 DSI panel") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27drm/panel: synaptics-r63353: Fix regulator unbalanceMichael Trimarchi
[ Upstream commit d2bd3fcb825725a59c8880070b1206b1710922bd ] The shutdown function can be called when the display is already unprepared. For example during reboot this trigger a kernel backlog. Calling the drm_panel_unprepare, allow us to avoid to trigger the kernel warning. Fixes: 2e87bad7cd33 ("drm/panel: Add Synaptics R63353 panel driver") Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27drm/panel: st7701: Add prepare_prev_first flag to drm_panelMarek Vasut
[ Upstream commit 406dd4c7984a457567ca652455d5efad81983f02 ] The DSI host must be enabled for the panel to be initialized in prepare(). Set the prepare_prev_first flag to guarantee this. This fixes the panel operation on NXP i.MX8MP SoC / Samsung DSIM DSI host. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20241124224812.150263-1-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241124224812.150263-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27drm/panel: novatek-nt35950: fix return value check in nt35950_probe()Yang Yingliang
[ Upstream commit f8fd0968eff52cf092c0d517d17507ea2f6e5ea5 ] mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241029123957.1588-1-yangyingliang@huaweicloud.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241029123957.1588-1-yangyingliang@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-27drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereferenceZhang Zekun
[ Upstream commit e1e1af9148dc4c866eda3fb59cd6ec3c7ea34b1d ] drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it. Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver") Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241025073408.27481-3-zhangzekun11@huawei.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241025073408.27481-3-zhangzekun11@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14drm/panel: simple: Add Microchip AC69T88A LVDS Display panelManikandan Muralidharan
[ Upstream commit 40da1463cd6879f542238b36c1148f517927c595 ] Add support for Microchip AC69T88A 5 inch TFT LCD 800x480 Display module with LVDS interface.The panel uses the Sitronix ST7262 800x480 Display driver Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240919091548.430285-2-manikandan.m@microchip.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09drm: panel: jd9365da-h3: Remove unused num_init_cmds structure memberHugo Villeneuve
commit 66ae275365be4f118abe2254a0ced1d913af93f2 upstream. Now that the driver has been converted to use wrapped MIPI DCS functions, the num_init_cmds structure member is no longer needed, so remove it. Fixes: 35583e129995 ("drm/panel: panel-jadard-jd9365da-h3: use wrapped MIPI DCS functions") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240930170503.1324560-1-hugo@hugovil.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240930170503.1324560-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-05drm: panel: nv3052c: correct spi_device_id for RG35XX panelRyan Walklin
[ Upstream commit 45608a3eb4902f32010a8328c0a01ccda4b38c9b ] The Anbernic RG35XX devices use an SPI LCD panel from an unknown OEM, with an NV3052C driver chip. As discussed previously, the integrating vendor and device name are preferred instead of the OEM serial. A previous patch corrected the device tree binding and of_device_id in the NV3052C driver, however the spi_device_id also needs correction. Correct the spi_device_id for the RG35XX panel. Signed-off-by: Ryan Walklin <ryan@testtoast.com> Fixes: 76dce2a96c0f ("drm: panel: nv3052c: Correct WL-355608-A8 panel compatible") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241020083836.175733-1-ryan@testtoast.com [DB: corrected the Fixes tag] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-05drm/panel: nt35510: Make new commands optionalLinus Walleij
[ Upstream commit 2418aa8516b26c5e332a1a8c216d4d620f965a56 ] The commit introducing the Frida display started to write the SETVCMOFF registers unconditionally, and some (not all!) Hydis display seem to be affected by ghosting after the commit. Make SETVCMOFF optional and only send these commands on the Frida display for now. Reported-by: Stefan Hansson <newbyte@postmarketos.org> Fixes: 219a1f49094f ("drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK") Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Tested-by: Stefan Hansson <newbyte@postmarketos.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240908-fix-nt35510-v2-1-d4834b9cdb9b@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-14drm/panel: himax-hx83102: Adjust power and gamma to optimize brightnessCong Yang
The current panel brightness is only 360 nit. Adjust the power and gamma to optimize the panel brightness. The brightness after adjustment is 390 nit. Fixes: 3179338750d8 ("drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel") Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241011020819.1254157-1-yangcong5@huaqin.corp-partner.google.com
2024-09-11Merge v6.11-rc7 into drm-nextSimona Vetter
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade. Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2024-09-05drm: panel: nv3052c: Correct WL-355608-A8 panel compatibleRyan Walklin
As per the previous dt-binding commit, update the WL-355608-A8 panel compatible to reflect the the integrating device vendor and name as the panel OEM is unknown. Fixes: 62ea2eeba7bf ("drm: panel: nv3052c: Add WL-355608-A8 panel") Signed-off-by: Ryan Walklin <ryan@testtoast.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-3-ryan@testtoast.com
2024-08-29drm/panel: nv3051d: Transition to mipi_dsi_dcs_write_seq_multiAbhishek Tamboli
Replace deprecated 'mipi_dsi_dcs_write_seq()' macro to 'mipi_dsi_dcs_write_seq_multi' macro in panel_nv3051d_init_sequence function. Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240827152504.30586-1-abhishektamboli9@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240827152504.30586-1-abhishektamboli9@gmail.com
2024-08-29drm/panel: novatek-nt35950: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the novatek-nt35950 panel to use multi style functions for improved error handling. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828182210.565861-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828182210.565861-1-tejasvipin76@gmail.com
2024-08-29drm/panel: visionox-vtdr6130: switch to devm_regulator_bulk_get_constNeil Armstrong
Switch to devm_regulator_bulk_get_const() to stop setting the supplies list in probe(), and move the regulator_bulk_data struct in static const. Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
2024-08-29drm/panel: visionox-vtdr6130: switch to mipi_dsi wrapped functionsNeil Armstrong
Make usage of the new _multi() mipi_dsi functions instead of the deprecated macros, improving error handling and printing. bloat-o-meter gives a 12% gain on arm64: Function old new delta visionox_vtdr6130_unprepare 208 204 -4 visionox_vtdr6130_prepare 1192 896 -296 Total: Before=2348, After=2048, chg -12.78% Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
2024-08-28drm/panel: add BOE tv101wum-ll2 panel driverNeil Armstrong
Add support for the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found in the Lenovo Smart Tab M10 tablet. The controller is unknown. Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sdm450-upstream-tbx605f-panel-v3-2-b792f93e1d6b@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sdm450-upstream-tbx605f-panel-v3-2-b792f93e1d6b@linaro.org
2024-08-27Revert "drm/panel-edp: Add SDC ATNA45AF01"Stephan Gerhold
This reverts commit 8ebb1fc2e69ab8b89a425e402c7bd85e053b7b01. The panel should be handled through the samsung-atna33xc20 driver for correct power up timings. Otherwise the backlight does not work correctly. We have existing users of this panel through the generic "edp-panel" compatible (e.g. the Qualcomm X1E80100 CRD), but the screen works only partially in that configuration: It works after boot but once the screen gets disabled it does not turn on again until after reboot. It behaves the same way with the default "conservative" timings, so we might as well drop the configuration from the panel-edp driver. That way, users with old DTBs will get a warning and can move to the new driver. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240715-x1e80100-crd-backlight-v2-2-31b7f2f658a3@linaro.org
2024-08-26drm/panel-edp: add BOE NE140WUM-N6G panel entryAbel Vesa
Add an eDP panel entry for BOE NE140WUM-N6G. Due to lack of documentation, use the delay_200_500_e80 timings like some other BOE entries for now. The raw edid of the panel is: 00 ff ff ff ff ff ff 00 09 e5 66 0b 00 00 00 00 1a 20 01 04 a5 1e 13 78 07 01 5f a7 54 4c 9b 24 11 51 56 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 9c 3e 80 c8 70 b0 3c 40 30 20 36 00 2e bc 10 00 00 1a 16 32 80 c8 70 b0 3c 40 30 20 36 00 2e bc 10 00 00 1a 00 00 00 fd 00 1e 3c 4c 4c 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 4e 45 31 34 30 57 55 4d 2d 4e 36 47 0a 00 dc Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240826-drm-panel-edp-add-boe-ne140wum-n6g-v2-1-2758e8574842@linaro.org
2024-08-20drm/panel: jdi-fhd-r63452: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the jdi-fhd-r63452 panel to use multi style functions for improved error handling. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240818060816.848784-3-tejasvipin76@gmail.com
2024-08-20drm/panel: ili9341: Add comments for registers in ili9341_config()Abhishek Tamboli
Add detail comments for registers definitions in struct ili9341_config(). Replace TODO with comment for each registers. Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240819175122.33176-1-abhishektamboli9@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240819175122.33176-1-abhishektamboli9@gmail.com
2024-08-20drm/panel: mantix-mlaf057we51: write hex in lowercaseTejas Vipin
Converts uppercase hex to lowercase hex for cleanup. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240820091556.1032726-3-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240820091556.1032726-3-tejasvipin76@gmail.com
2024-08-20drm/panel: mantix-mlaf057we51: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the mantix-mlaf057we51 panel to use multi style functions for improved error handling. Reviewed-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Link: https://lore.kernel.org/r/20240820091556.1032726-2-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240820091556.1032726-2-tejasvipin76@gmail.com
2024-08-19drm/panel: jd9365da: Modify the init code of MelfasZhaoxiong Lv
Modify the Melfas panel init code to satisfy the gamma value of 2.2 Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240807100429.13260-3-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-3-lvzhaoxiong@huaqin.corp-partner.google.com
2024-08-19drm/panel: jd9365da: Move "exit sleep mode" and "set display on" cmdsZhaoxiong Lv
Move the "exit sleep mode" and "set display on" command from enable() to init() function. As mentioned in the patch: https://lore.kernel.org/all/20240624141926.5250-2-lvzhaoxiong@huaqin.corp-partner.google.com/ The Mediatek Soc DSI host has different modes in prepare() and enable() functions, prepare() is in LP mode and enable() is in HS mode. Since the "exit sleep mode" and "set display on" command must also be sent in LP mode, so we also move "exit sleep mode" and "set display on" command to the init() function. We have no other actions in the enable() function after moves "exit sleep mode" and "set display on", and we checked the call of the enable() function during the "startup" process. It seems that only one judgment was made in drm_panel_enabel(). If the panel does not define enable(), the judgment will skip the enable() and continue execution. This does not seem to have any other effect, and we found that some drivers also seem to have no enable() function added, for example: panel-asus-z00t-tm5p5-n35596 / panel-boe-himax8279d... In addition, we briefly tested the kingdisplay_kd101ne3 panel and melfas_lmfbx101117480 panel, and it seems that there is no garbage on the panel, so we delete enable() function. After moving the "exit sleep mode" and "set display on" command to the init() function, we no longer need additional delay judgment, so we delete variables "exit_sleep_to_display_on_delay_ms" and "display_on_delay_ms". Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
2024-08-19drm/panel: simple: Add ON Tat Industrial Company KD50G21-40NT-A1 panelLiu Ying
ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI interface. The LCD module specification can be found at: https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240816085004.491494-3-victor.liu@nxp.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240816085004.491494-3-victor.liu@nxp.com
2024-08-19drm/panel: st7701: Add Anbernic RG28XX panel supportHironori KIKUCHI
The Anbernic RG28XX is a handheld gaming device with a 2.8 inch 480x640 display. Add support for the display panel. This panel is driven by a variant of ST7701 driver IC internally, confirmed by dumping and analyzing its BSP initialization sequence by using a logic analyzer. It is very similar to the existing densitron,dmt028vghmcmi-1a panel, but differs in some unknown register values. Besides, it is connected via SPI, so add a new entry for the panel. Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240804061503.881283-6-kikuchan98@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-6-kikuchan98@gmail.com
2024-08-19drm/panel: st7701: Add support for SPI for configurationHironori KIKUCHI
The ST7701 supports not only MIPI DSI, but also SPI as an interface for configuration. To support a panel connected via SPI with an RGB parallel interface, add support for SPI using MIPI DBI helpers. Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240804061503.881283-5-kikuchan98@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-5-kikuchan98@gmail.com
2024-08-19drm/panel: st7701: Decouple DSI and DRM partsHironori KIKUCHI
Split into a DSI-specific part and a DRM-specific part. Additionally, use devm_add_action_or_reset() to simplify the flow, and disable and unprepare the panel on cleanup. Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240804061503.881283-3-kikuchan98@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-3-kikuchan98@gmail.com
2024-08-19drm/panel: st7701: Rename macrosHironori KIKUCHI
Rename DSI_CMD* macros to ST7701_CMD*, and ST7701_DSI macro to ST7701_WRITE, because they do not belong to DSI. Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240804061503.881283-2-kikuchan98@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-2-kikuchan98@gmail.com
2024-08-19drm/panel: simple: add Innolux G070ACE-LH3 LVDS display supportSteffen Trumtrar
The G070ACE-LH3 is a 7" TFT Color LCD module with WLED backlight. https://www.data-modul.com/sites/default/files/products/G070ACE-LH3-specification-12058417.pdf Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240729-b4-v6-10-topic-innolux-v2-2-27d32c766ce5@pengutronix.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240729-b4-v6-10-topic-innolux-v2-2-27d32c766ce5@pengutronix.de
2024-08-16drm/panel: panel-sony-acx565akm: Use backlight power constantsThomas Zimmermann
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-8-tzimmermann@suse.de
2024-08-16drm/panel: panel-samsung-s6e3ha2: Use backlight power constantsThomas Zimmermann
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-7-tzimmermann@suse.de
2024-08-16drm/panel: panel-samsung-s6e63j0x03: Use backlight power constantsThomas Zimmermann
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-6-tzimmermann@suse.de
2024-08-16drm/panel: panel-orisetech-otm8009a: Use backlight power constantsThomas Zimmermann
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-5-tzimmermann@suse.de
2024-08-16drm/panel: panel-novatak-nt35510: Use backlight power constantsThomas Zimmermann
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality or semantics. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240731122311.1143153-4-tzimmermann@suse.de
2024-08-13drm/panel: startek-kd070fhfid015: transition to mipi_dsi wrapped functionsTejas Vipin
Use multi style wrapped functions for mipi_dsi in the startek-kd070fhfid015 panel. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240806135949.468636-3-tejasvipin76@gmail.com
2024-08-02drm/panel-edp: Fix HKC MB116AN01 nameTerry Hsiao
Rename HKC MB116AN01 from Unknown to MB116AN01 Signed-off-by: Terry Hsiao <terry_hsiao@compal.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240802070602.154201-1-terry_hsiao@compal.corp-partner.google.com
2024-07-29Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get a late RC of v6.10 before moving into v6.11. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-07-26drm/panel-edp: Add CSW MNB601LS1-4Haikun Zhou
Add support for the CSW MNB601LS1-4, pleace the EDID here for subsequent reference. 00 ff ff ff ff ff ff 00 0e 77 04 11 00 00 00 00 00 22 01 04 a5 1a 0e 78 03 a1 35 9b 5e 58 91 25 1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 09 1e 56 dc 50 00 28 30 30 20 36 00 00 90 10 00 00 1a 00 00 00 fd 00 28 3c 30 30 08 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43 53 4f 54 20 54 39 0a 20 20 20 20 20 00 00 00 fe 00 4d 4e 42 36 30 31 4c 53 31 2d 34 0a 20 00 20 Signed-off-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240725115229.3416028-1-zhouhaikun5@huaqin.corp-partner.google.com
2024-07-25drm/panel: nt36672e: Break some CMDS into helper functionsCong Yang
Break select page cmds and reload cmds into helper functions. Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240710084715.1119935-4-yangcong5@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-4-yangcong5@huaqin.corp-partner.google.com
2024-07-25drm/panel: nt35521: Break some CMDS into helper functionsCong Yang
Break select page cmds into helper functions. Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240710084715.1119935-3-yangcong5@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-3-yangcong5@huaqin.corp-partner.google.com
2024-07-25drm/panel: boe-tv101wum-nl6: Break some CMDS into helper functionsCong Yang
hj110iz-01a and tv110c9m-ll3 both nt36523 controller, and they have some common cmds, so let's break them into helper functions. Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240710084715.1119935-2-yangcong5@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-2-yangcong5@huaqin.corp-partner.google.com
2024-07-24drm/panel/panel-ilitek-ili9806e: Add Densitron DMT028VGHMCMI-1D TFT to ↵Marek Vasut
ILI9806E DSI TCON driver Add Densitron DMT028VGHMCMI-1D 480x640 TFT matrix 2.83 inch panel attached to Ilitek ILI9806E DSI TCON into the ILI9806E driver. Note that the Densitron panels use different TCONs, this driver is for the later panel, use panel-ilitek-st7701.c for the former panel: DMT028VGHMCMI-1A - ST7701 DMT028VGHMCMI-1D - ILI9806E Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20240724005700.196073-2-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240724005700.196073-2-marex@denx.de
2024-07-24drm/panel: boe-th101mb31ig002 : using drm_connector_helper_get_modes_fixed()Zhaoxiong Lv
Use public functions( drm_connector_helper_get_modes_fixed()) to get porch parameters. Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240723062615.14796-3-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240723062615.14796-3-lvzhaoxiong@huaqin.corp-partner.google.com
2024-07-24drm/panel: boe-th101mb31ig002 : Fix the way to get porch parametersZhaoxiong Lv
The current driver can only obtain the porch parameters of boe-th101mb31ig002. Modify it to obtain the porch parameters of the panel currently being used. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Link: https://lore.kernel.org/r/20240723062615.14796-2-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240723062615.14796-2-lvzhaoxiong@huaqin.corp-partner.google.com
2024-07-24drm: panel: boe-bf060y8m-aj0: Enable prepare_prev_firstDang Huynh
Enable prepare_prev_first flag for BF060Y8M-AJ0 panel so that the previous controller should be prepared first before the prepare for the panel is called. This makes sure that the previous controller, likely to be a DSI host controller should be initialized to LP-11 before the panel is powered up. Suggested-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dang Huynh <danct12@riseup.net> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240722-bf060y8m-aj0-prepare-prev-v1-1-0e51c0f59d22@riseup.net Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240722-bf060y8m-aj0-prepare-prev-v1-1-0e51c0f59d22@riseup.net
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 02:59:40 +0000