summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-simple.c
AgeCommit message (Collapse)Author
2020-07-12drm: panel: simple: Fix bpc for LG LB070WV8 panelLaurent Pinchart
The LG LB070WV8 panel incorrectly reports a 16 bits per component value, while the panel uses 8 bits per component. Fix it. Fixes: dd0150026901 ("drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200711225317.28476-1-laurent.pinchart+renesas@ideasonboard.com
2020-07-11drm/panel: auo,b116xw03: fix flash backlight when power onJitao Shi
Delay the backlight on to make sure the video stable. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200705094514.34526-1-jitao.shi@mediatek.com
2020-07-01drm/panel: panel-simple: drop use of legacy drm_bus_flagsSam Ravnborg
Replace all uses of the legacy drm_bus_flags with their relevant _SAMPLE_ variant. This is a 1:1 replacement, no effort was made to validate the actual bus flags for the panels. Note: DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-6-sam@ravnborg.org
2020-06-30drm: panel: simple: Warn in case of incorrect bus format for LVDS panelsLaurent Pinchart
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus formats are valid for LVDS panels. Warn at probe time to catch the common mistake of using an incorrect format, as well as discrepancies between the bus format and the reported bpc. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-5-laurent.pinchart+renesas@ideasonboard.com
2020-06-30drm: panel: simple: Drop drive/sample bus flags for LVDS panelsLaurent Pinchart
The DRM bus flags reporting on which clock edge the pixel data and sync signals are sampled or driven don't make sense for LVDS panels, as the bus then uses sub-clock timings to send data. Drop those flags and add a warning in the probe function to make sure the mistake won't be repeated. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-4-laurent.pinchart+renesas@ideasonboard.com
2020-06-30drm: panel: simple: Correct bus format for Satoz SAT050AT40H12R2Laurent Pinchart
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-3-laurent.pinchart+renesas@ideasonboard.com
2020-06-30drm: panel: simple: Correct connector type for Starry KR070PE2TLaurent Pinchart
The Starry KR070PE2T panel is a DPI panel, not and LVDS panel. Fix its connector type. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Pascal Roeleven <dev@pascalroeleven.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-2-laurent.pinchart+renesas@ideasonboard.com
2020-06-27drm/panel-simple: Add missing BUS descriptions for some panelsDmitry Osipenko
This patch adds missing BUS fields to the display panel descriptions of the panels which are found on NVIDIA Tegra devices: 1. AUO B101AW03 2. Chunghwa CLAA070WP03XG 3. Chunghwa CLAA101WA01A 4. Chunghwa CLAA101WB01 5. Innolux N156BGE L21 6. Samsung LTN101NT05 Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-3-digetx@gmail.com
2020-06-27drm/panel-simple: Correct EDT ET057090DHU connector typeDmitry Osipenko
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch corrects the panel's description. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: 94f07917ebe8 ("drm/panel-simple: Add missing connector type for some panels") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-2-digetx@gmail.com
2020-06-21drm/panel-simple: fix connector type for newhaven_nhd_43_480272ef_atxlTomi Valkeinen
Add connector type for newhaven_nhd_43_480272ef_atxl, as drm_panel_bridge_add() requires connector type to be set. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200609102809.753203-1-tomi.valkeinen@ti.com
2020-06-21drm/panel: simple: add Tianma TM070JVHG33Max Merchel
Add support for the Tianma Micro-electronics TM070JVHG33 7.0" WXGA display to panel-simple. Signed-off-by: Max Merchel <Max.Merchel@tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-5-matthias.schiffer@ew.tq-group.com
2020-06-21drm/panel: simple: add CDTech S070PWS19HP-FC21 and S070SWV29HG-DC44Michael Krummsdorf
Add support for the CDTech Electronics displays S070PWS19HP-FC21 (7.0" WSVGA) and S070SWV29HG-DC44 (7.0" WVGA) to panel-simple. Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200612072219.13669-4-matthias.schiffer@ew.tq-group.com
2020-06-21drm/panel-simple: fix connector type for LogicPD Type28 DisplayAdam Ford
The LogicPD Type28 display used by several Logic PD products has not worked since v5.6. The connector type for the LogicPD Type 28 display is missing and drm_panel_bridge_add() requires connector type to be set. Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: 0d35408afbeb ("drm/panel: simple: Add Logic PD Type 28 display support") Cc: Adam Ford <aford173@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.6+ Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200615131934.12440-1-aford173@gmail.com
2020-06-20drm/panel-simple: Add missing connector type for some panelsDmitry Osipenko
The DRM panel bridge core requires connector type to be set up properly, otherwise it rejects the panel. The missing connector type problem popped up while I was trying to wrap CLAA070WP03XG panel into a DRM bridge in order to test whether panel's rotation property work properly using panel-simple driver on NVIDIA Tegra30 Nexus 7 tablet device, which uses CLAA070WP03XG display panel. The NVIDIA Tegra DRM driver recently gained DRM bridges support for the RGB output and now driver wraps directly-connected panels into DRM bridge. Hence all panels should have connector type set properly now, otherwise the panel's wrapping fails. This patch adds missing connector types for the LVDS panels that are found on NVIDIA Tegra devices: 1. AUO B101AW03 2. Chunghwa CLAA070WP03XG 3. Chunghwa CLAA101WA01A 4. Chunghwa CLAA101WB01 5. EDT ET057090DHU 6. Innolux N156BGE L21 7. Samsung LTN101NT05 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200617222703.17080-8-digetx@gmail.com
2020-06-05drm/panel: simple: Add support for KOE TX26D202VM0BWA panelLiu Ying
This patch adds support for Kaohsiung Opto-Electronics Inc. 10.1" TX26D202VM0BWA WUXGA(1920x1200) TFT LCD panel with LVDS interface. The panel has dual LVDS channels. My panel is manufactured by US Micro Products(USMP). There is a tag at the back of the panel, which indicates the panel type is 'TX26D202VM0BWA' and it's made by KOE in Taiwan. The panel spec from USMP can be found at: https://www.usmicroproducts.com/sites/default/files/datasheets/USMP-T101-192120NDU-A0.pdf The below panel spec from KOE is basically the same to the one from USMP. However, the panel type 'TX26D202VM0BAA' is a little bit different. It looks that the two types of panel are compatible with each other. http://www.koe.j-display.com/upload/product/TX26D202VM0BAA.pdf Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1590991880-24273-1-git-send-email-victor.liu@nxp.com
2020-06-04drm/panel: simple: Set connector type for DSI panelsLaurent Pinchart
None of the DSI panels set the connector_type in their panel_desc descriptor. As they are all guaranteed to be DSI panels, that's an easy fix, set the connector type to DRM_MODE_CONNECTOR_DSI. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200602171240.2785-1-laurent.pinchart+renesas@ideasonboard.com
2020-05-27drm: Nuke mode->vrefreshVille Syrjälä
Get rid of mode->vrefresh and just calculate it on demand. Saves a bit of space and avoids the cached value getting out of sync with reality. Mostly done with cocci, with the following manual fixups: - Remove the now empty loop in drm_helper_probe_single_connector_modes() - Fix __MODE() macro in ch7006_mode.c - Fix DRM_MODE_ARG() macro in drm_modes.h - Remove leftover comment from samsung_s6d16d0_mode - Drop the TODO @@ @@ struct drm_display_mode { ... - int vrefresh; ... }; @@ identifier N; expression E; @@ struct drm_display_mode N = { - .vrefresh = E }; @@ identifier N; expression E; @@ struct drm_display_mode N[...] = { ..., { - .vrefresh = E } ,... }; @@ expression E; @@ { DRM_MODE(...), - .vrefresh = E, } @@ identifier M, R; @@ int drm_mode_vrefresh(const struct drm_display_mode *M) { ... - if (M->vrefresh > 0) - R = M->vrefresh; - else if (...) { ... } ... } @@ struct drm_display_mode *p; expression E; @@ ( - p->vrefresh = E; | - p->vrefresh + drm_mode_vrefresh(p) ) @@ struct drm_display_mode s; expression E; @@ ( - s.vrefresh = E; | - s.vrefresh + drm_mode_vrefresh(&s) ) @@ expression E; @@ - drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E) + drm_mode_vrefresh(E) @find_substruct@ identifier X; identifier S; @@ struct X { ... struct drm_display_mode S; ... }; @@ identifier find_substruct.S; expression E; identifier I; @@ { .S = { - .vrefresh = E } } @@ identifier find_substruct.S; identifier find_substruct.X; expression E; identifier I; @@ struct X I[...] = { ..., .S = { - .vrefresh = E } ,... }; v2: Drop TODO v3: Rebase v4: Rebase Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com
2020-05-09drm/panel-simple: Support hpd-gpios for delaying prepare()Douglas Anderson
People use panel-simple when they have panels that are builtin to their device. In these cases the HPD (Hot Plug Detect) signal isn't really used for hotplugging devices but instead is used for power sequencing. Panel timing diagrams (especially for eDP panels) usually have the HPD signal in them and it acts as an indicator that the panel is ready for us to talk to it. Sometimes the HPD signal is hooked up to a normal GPIO on a system. In this case we need to poll it in the correct place to know that the panel is ready for us. In some system designs the right place for this is panel-simple. When adding this support, we'll account for the case that there might be a circular dependency between panel-simple and the provider of the GPIO. The case this was designed for was for the "ti-sn65dsi86" bridge chip. If HPD is hooked up to one of the GPIOs provided by the bridge chip then in our probe function we'll always get back -EPROBE_DEFER. Let's handle this by allowing this GPIO to show up late if we saw -EPROBE_DEFER during probe. NOTE: since the gpio_get_optional() is used, if the "hpd-gpios" isn't there our variable will just be NULL and we won't do anything in prepare(). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.3.I53fed5b501a31e7a7fa13268ebcdd6b77bd0cadd@changeid
2020-05-09panel: simple: Add BOE NV133FHM-N62Douglas Anderson
All info I could find about this panel show that it behaves the same as the BOE NV133FHM-N61. However, it definitely appears to be a unique panel because reading the EDID shows "NV133FHM-N62". We'll add a string match for the new panel but until we find something unique about it we'll just point at the N61's structures. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.3.I525ebd471f5340a6a369af7bde06ef04174d2f41@changeid
2020-05-09panel: simple: Fix size and bpp of BOE NV133FHM-N61Douglas Anderson
The BOE NV133FHM-N61 is documented in the original commit to be a 13.3" panel, but the size listed in our struct doesn't match. Specifically: math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92 Searching around on the Internet shows that the size that was in the structure was the "Outline Size", not the "Display Area". Let's fix it. Also the Internet says that this panel supports 262K colors. That's 6bpp, not 8bpp. Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid
2020-05-04drm/panel: panel-simple: fix AUO G101EVN010 connector/panel typeTomi Valkeinen
The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as indicated by the current bus_format. Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the connector_type to LVDS. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [updated patch subject] Link: https://patchwork.freedesktop.org/patch/msgid/20200417114043.25381-1-tomi.valkeinen@ti.com
2020-04-25panel: simple: Add Ivo M133NWF4 R0Bjorn Andersson
The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080 eDP panel, add support for it in panel-simple. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200420215728.1927434-2-bjorn.andersson@linaro.org
2020-04-25panel: simple: Add BOE NV133FHM-N61Bjorn Andersson
The BOE NV133FHM-N61 panel is a 13.3" 1920x1080 eDP panel, add support for it in panel-simple. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [add boe_nv133fhm_n61_modes in alphabetical order] Link: https://patchwork.freedesktop.org/patch/msgid/20200420215742.1927498-2-bjorn.andersson@linaro.org
2020-04-25drm: panel: Set connector type for LP120UP1Enric Balletbo i Serra
The LP120UP1 is a eDP panel, set the connector type accordingly. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200416164404.2418426-1-enric.balletbo@collabora.com
2020-04-25drm/panel: simple: Add support for AUO G121EAN01.4 panelSebastian Reichel
Add timings for the AUO G121EAN01.4 panel. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200415172725.84257-4-sebastian.reichel@collabora.com
2020-04-25drm/panel: simple: Add support for AUO G156XTN01.0 panelSebastian Reichel
Add timings for the AUO G156XTN01.0 panel. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200415172725.84257-3-sebastian.reichel@collabora.com
2020-04-25drm/panel: simple: Add support for AUO G190EAN01 panelSebastian Reichel
Add timings for the G190EAN01 dual channel LVDS panel. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200415172725.84257-2-sebastian.reichel@collabora.com
2020-04-17Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging required to pull topic/phy-compliance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-03-28drm: panel: Add Starry KR070PE2TPascal Roeleven
The KR070PE2T is a 7" panel with a resolution of 800x480. KR070PE2T is the marking present on the ribbon cable. As this panel is probably available under different brands, this marking will catch most devices. As I can't find a datasheet for this panel, the bus_flags are instead from trial-and-error. The flags seem to be common for these kind of panels as well. Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200320112205.7100-3-dev@pascalroeleven.nl
2020-03-25drm/panel-simple: drop use of data-mapping propertySam Ravnborg
The "data-mapping" property may not be the best way to describe the interface between panels and display interfaces. Drop use of in the panel-simple driver, so we have time to find the right way to describe this interface. Fixes: 4a1d0dbc8332 ("drm/panel: simple: add panel-dpi support") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Cc: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200314153047.2486-3-sam@ravnborg.org
2020-03-11drm/panel-simple: Fix dotclock for Logic PD Type 28Ville Syrjälä
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. Someone tell me which (if either) of the dotclock or vreresh is correct? Cc: Adam Ford <aford173@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-22-ville.syrjala@linux.intel.com Reviewed-by: Adam Ford <aford173@gmail.com>
2020-03-10drm/panel-simple: Fix dotclock for Ortustech COM37H3MH. Nikolaus Schaller
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. There are two variants of the COM37H3M panel. The older one's COM37H3M05DTC data sheet specifies: MIN TYP MAX CLK frequency fCLK -- 22.4 26.3 MHz (in VGA mode) VSYNC Frequency fVSYNC 54 60 66 Hz VSYNC cycle time tv -- 650 -- H HSYNC frequency fHSYNC -- 39.3 -- kHz HSYNC cycle time th -- 570 -- CLK The newer one's COM37H3M99DTC data sheet says: MIN TYP MAX CLK frequency fCLK 18 19.8 27 MHz VSYNC Frequency fVSYNC 54 60 66 Hz VSYNC cycle time tv 646 650 700 H HSYNC frequency fHSYNC -- 39.0 50.0 kHz HSYNC cycle time th 504 508 630 CLK So we choose a parameter set that lies within the specs of both variants. We start at .vrefresh = 60, choose .htotal = 570 and .vtotal = 650 and end up in a clock of 22.230 MHz. Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/e63a0533ad5b5142373437ef758aedbdb716152d.1583826198.git.hns@goldelico.com
2020-03-10drm: panel: Set connector type for OrtusTech COM43H4M85ULC panelLaurent Pinchart
The OrtusTech COM43H4M85ULC is a DPI panel, set the connector type accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200309184210.10042-1-laurent.pinchart@ideasonboard.com
2020-03-07Revert "drm/panel: simple: Add support for Sharp LQ150X1LG11 panels"Peter Rosin
This reverts commit 0f9cdd743f7f8d470fff51b11250f02fc554cf1b. The interface of the panel is LVDS, not parallel. The color depth is RGB888, not RGB565. The panel has additional features, making it not so simple. The only user (upstream) of this panel is appropriately using panel-lvds. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200305130536.26011-1-peda@axentia.se
2020-02-29drm/panel: simple: add panel-dpi supportSam Ravnborg
The panel-dpi compatible is a fallback that allows the DT to specify the timing. When matching panel-dpi expect the device tree to include the timing information for the display-panel. Background for this change: There are a lot of panels and new models hits the market very often. It is a lost cause trying to chase them all and users of new panels will often find them in situations that the panel they ues are not supported by the kernel. On top of this a lot of panels are customized based on customer specifications. Including the panel timing in the device tree allows for a simple way to describe the actual HW and use this description in a generic way in the kernel. This allows uses of proprietary panels, or panels which are not included in the kernel, to specify the timing in the device tree together with all the other HW descriptions. And thus, using the device tree it is then easy to add support for an otherwise unknown panel. The current support expect panels that do not require any delays for prepare/enable/disable/unprepare. Oleksandr Suvorov replied: I've just tested this patch on Apalis iMX6Q and Colibri iMX7D using panel settings from the following patch: https://lore.kernel.org/linux-arm-kernel/20200115123401.2264293-4-oleksandr.suvorov@toradex.com/ It works for me, thanks! Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Tested-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-6-sam@ravnborg.org
2020-02-27drm/panel: simple: Add NewEast Optoelectronics CO., LTD WJFH116008A panel ↵Vasily Khoruzhick
support This commit adds support for the NewEast Optoelectronics CO., LTD WJFH116008A 11.6" 1920x1080 TFT LCD panel. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200226081011.1347245-6-anarsoul@gmail.com
2020-02-22drm/panel: simple: fix osd070t1718_19ts sync drive edgeTomi Valkeinen
The panel datasheet says that the panel samples at falling edge, but does not say anything about h/v sync signals. Testing shows that if the sync signals are driven on falling edge, the picture on the panel will be slightly shifted right. Setting sync drive edge to the same as data drive edge fixes this issue. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191114093950.4101-4-tomi.valkeinen@ti.com
2020-02-11drm/panel: simple: Add Rocktech RK101II01D-CT panelJyri Sarha
Add support for Rocktech RK101II01D-CT, 10.1" 1280x800 TFT with LVDS interface, LED backlight and integrated Goodix GT928 capacitive touch panel. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/b543b77d8af7cbbef852d3df4595f11ac1aa0046.1581423249.git.jsarha@ti.com
2020-01-31drm/panel: simple: Fix the lt089ac29000 bus_formatBoris Brezillon
The lt089ac29000 panel is an LVDS panel, not a DPI one. Fix the definition to reflect this fact. v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * New patch Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-12-boris.brezillon@collabora.com
2020-01-30drm/panel: simple: Add EDT panel supportMarian-Cristian Rotariu
EDT ET043080DH6-GP is a 4.3" WQVGA 480x272 RGB LCD panel used on the iWave Generic SODIMM Development Platform. Changes in v2: -added mandatory .connector_type field -changed the .bus_format MEDIA_BUS_FMT_RGB666_1X18 Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1580386118-22895-3-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com
2020-01-23drm/panel: simple: add display timings for logic technologies displaysMarcel Ziswiler
Add display timings for the following 3 display panels manufactured by Logic Technologies Limited: - LT161010-2NHC e.g. as found in the Toradex Capacitive Touch Display 7" Parallel [1] - LT161010-2NHR e.g. as found in the Toradex Resistive Touch Display 7" Parallel [2] - LT170410-2WHC e.g. as found in the Toradex Capacitive Touch Display 10.1" LVDS [3] Those panels may also be distributed by Endrich Bauelemente Vertriebs GmbH [4]. [1] https://docs.toradex.com/104497-7-inch-parallel-capacitive-touch-display-800x480-datasheet.pdf [2] https://docs.toradex.com/104498-7-inch-parallel-resistive-touch-display-800x480.pdf [3] https://docs.toradex.com/105952-10-1-inch-lvds-capacitive-touch-display-1280x800-datasheet.pdf [4] https://www.endrich.com/isi50_isi30_tft-displays/lt170410-1whc_isi30 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200120080100.170294-3-marcel@ziswiler.com
2020-01-13drm/panel: simple: Add support for the Frida FRD350H54004 panelPaul Cercueil
The FRD350H54004 is a simple 3.5" 320x240 24-bit TFT panel, found for instance inside the Anbernic RG-350 handheld gaming console. v2: Order alphabetically v3: Add connector_type, and update timings according to the constraints listed in the datasheet Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200113161741.32061-3-paul@crapouillou.net
2020-01-09drm/panel: simple: Add Satoz SAT050AT40H12R2 panel supportMiquel Raynal
Add support for the Satoz SAT050AT40H12R2 panel. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-2-miquel.raynal@bootlin.com
2020-01-09drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simpleTobias Schramm
This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple driver. The panel is used by the pine64 Pinebook Pro. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109112952.2620-2-t.schramm@manjaro.org
2020-01-09drm/panel: Add support for AUO B116XAK01 panelRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-2-robdclark@gmail.com
2019-12-09drm/panel: drop drm_device from drm_panelSam Ravnborg
The panel drivers used drm_panel.drm for two purposes: 1) Argument to drm_mode_duplicate() 2) drm->dev was used in error messages The first usage is replaced with drm_connector.dev - drm_connector is already connected to a drm_device and we have a valid connector The second usage is replaced with drm_panel.dev - this makes drivers more consistent in their dev argument used for dev_err() and friends With these replacements there are no more uses of drm_panel.drm, so it is removed from struct drm_panel. With this change drm_panel_attach() and drm_panel_detach() no longer have any use as they are empty functions. v2: - editorial correction in changelog (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-8-sam@ravnborg.org
2019-12-09drm/panel: add drm_connector argument to get_modes()Sam Ravnborg
Today the bridge creates the drm_connector, but that is planned to be moved to the display drivers. To facilitate this, update drm_panel_funcs.get_modes() to take drm_connector as an argument. All panel drivers implementing get_modes() are updated. v2: - drop accidental change (Laurent) - update docs for get_modes (Laurent) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Stefan Mavrodiev <stefan@olimex.com> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Purism Kernel Team <kernel@puri.sm> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-6-sam@ravnborg.org
2019-12-09drm/panel: simple: use drm_panel backlight supportSam Ravnborg
Use drm_panel infrastructure for backlight. Replace direct calls with drm_panel_*() calls to utilize the drm_panel support. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191207140353.23967-4-sam@ravnborg.org
2019-11-30drm/panel: simple: Add Logic PD Type 28 display supportAdam Ford
Previously, there was an omap panel-dpi driver that would read generic timings from the device tree and set the display timing accordingly. This driver was removed so the screen no longer functions. This patch modifies the panel-simple file to setup the timings to the same values previously used. Fixes: 8bf4b1621178 ("drm/omap: Remove panel-dpi driver") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191016135147.7743-1-aford173@gmail.com
2019-09-08drm/panel: panel-simple: Set OSD070T1718 panel typeLaurent Pinchart
The OSD070T1718 is a DPI panel, set its type accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190904133723.30418-1-laurent.pinchart@ideasonboard.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 20:17:03 +0000