| Age | Commit message (Collapse) | Author |
|---|
|
drm_mode_duplicate() could return NULL due to lack of memory,
which will then call NULL pointer dereference. Add a check to
prevent it.
Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241025073408.27481-3-zhangzekun11@huawei.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025073408.27481-3-zhangzekun11@huawei.com
|
|
The current panel brightness is only 360 nit. Adjust the power and gamma to
optimize the panel brightness. The brightness after adjustment is 390 nit.
Fixes: 3179338750d8 ("drm/panel: himax-hx83102: Support for IVO t109nw41 MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011020819.1254157-1-yangcong5@huaqin.corp-partner.google.com
|
|
mipi_dsi_msleep should be modified to accept ctx as a pointer and the
function call should be adjusted accordingly.
Fixes: a2ab7cb169da ("drm/panel: himax-hx83102: use wrapped MIPI DCS functions")
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240612133550.473279-2-tejasvipin76@gmail.com
[narmstrong: fixed subject and fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612133550.473279-2-tejasvipin76@gmail.com
|
|
Take advantage of some of the new wrapped routines introduced by
commit f79d6d28d8fe ("drm/mipi-dsi: wrap more functions for streamline
handling") to simplify the himax-hx83102 driver a bit more. This gets
rid of some extra error prints (since the _multi functions all print
errors for you) and simplifies the code a bit.
One thing here that isn't just refactoring is that in a few places we
now check with errors with "if (err)" instead of "if (err < 0)". All
errors are expected to be negative so this is not expected to have any
impact. The _multi code internally considers anything non-zero to be
an error so this just makes things consistent.
It can also be noted that hx83102_prepare() has a mix of things that
can take advantage of _multi calls and things that can't. The cleanest
seemed to be to use the multi_ctx still but consistently use the
"accum_err" variable for error returns, though that's definitely a
style decision with pros and cons.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.8.If761d37b5d511867ac8207fe8220ae48d444a04f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.8.If761d37b5d511867ac8207fe8220ae48d444a04f@changeid
|
|
The mipi_dsi_dcs_nop() function returns an error but we weren't
checking it in hx83102_prepare(). Add a check. This is highly unlikely
to matter in practice. If the NOP failed then likely later MIPI
commands would fail too.
Found by code inspection.
Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.7.I3fae28745bf2cacd8dac04d7a06daea50e233f46@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.7.I3fae28745bf2cacd8dac04d7a06daea50e233f46@changeid
|
|
The enable GPIO should clearly be set low before turning off
regulators. That matches both the inverse order that things were
enabled and also the order in unprepare().
Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240517143643.6.Id0659a80147cf51e0ebb8fe7fee18db86851960d@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240517143643.6.Id0659a80147cf51e0ebb8fe7fee18db86851960d@changeid
|
|
The IVO t109nw41 is a 11.0" WUXGA TFT LCD panel, use hx83102 controller
which fits in nicely with the existing panel-himax-hx83102 driver. Hence,
we add a new compatible with panel specific config.
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240516072039.1287065-7-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516072039.1287065-7-yangcong5@huaqin.corp-partner.google.com
|
|
The BOE nv110wum-l60 is a 11.0" WUXGA TFT LCD panel, use hx83102 controller
which fits in nicely with the existing panel-himax-hx83102 driver. Hence,
we add a new compatible with panel specific config.
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240516072039.1287065-5-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516072039.1287065-5-yangcong5@huaqin.corp-partner.google.com
|
|
The Starry HX83102 based mipi panel should never have been part of the boe
tv101wum-n16 driver. Discussion with Doug and Linus in V1 [1], we need a
separate driver to enable the hx83102 controller.
In hx83102 driver, add DSI commands as macros. So it can add some panels
with same control model in the future.
In the old boe-tv101wum-nl6 driver inital cmds was invoked at the end of
prepare() function , and call 0x11 and 0x29 at end of inital. For
himax-hx83102 driver, we move 0x11 and 0x29 cmds invoked at prepare()
function.
Note:0x11 is mipi_dsi_dcs_exit_sleep_mode
0x29 is mipi_dsi_dcs_set_display_on
[1]: https://lore.kernel.org/all/CACRpkdbzYZAS0=zBQJUC4CB2wj4s1h6n6aSAZQvdMV95r3zRUw@mail.gmail.com
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240516072039.1287065-3-yangcong5@huaqin.corp-partner.google.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516072039.1287065-3-yangcong5@huaqin.corp-partner.google.com
|
