Age | Commit message (Collapse) | Author | |
---|---|---|---|
2021-09-20 | drm/panel-edp: Better describe eDP panel delays | Douglas Anderson | |
Now that the eDP panel driver only handles eDP panels we can make better sense of the delays here. Let's describe them in terms of the standard eDP timing diagram from the eDP spec. As part of this, it becomes pretty clear that some eDP panels have too long of a "hpd_reliable_delay". This used to be the "prepare" delay. It's the fixed delay that we do in the panel driver after powering on our panel before we look at the HPD signal. To understand this better, first realize that there could be 3 paths we follow depending on how HPD is hooked up. Let's walk through them: 1. HPD is handled by the eDP controller driver. Until "recently" (commit 48834e6084f1 ("drm/panel-simple: Support hpd-gpios for delaying prepare()") in May 2020) this was the only supported way. This is supposed to be when the controller driver gets HPD straight to a dedicated pin. In this case the controller driver should be waiting for HPD in its pre_enable() routine which should be called right after the panel's prepare() function is called. That means that the old "prepare" delay was only needed as a delay after powering the panel but before looking at HPD. 2. HPD is handled via hpd-gpios in the panel. This is much like #1 but much easier to follow since all the handling is in the panel driver. 3. The no-hpd case. This is also easy to follow. In any case, even though it seems like some old panel data was using this incorrectly, let's not touch the old data structures but we'll add a note indicating that something seems off. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.11.I2d798dd015332661c5895ef744bc8ec5cd2e06ca@changeid | |||
2021-09-20 | drm/panel-edp: Split the delay structure out | Douglas Anderson | |
In the case where we can read an EDID for a panel the only part of the panel description that can't be found directly from the EDID is the description of the delays. Let's break the delay structure out so that we can specify just the delays for panels that are detected by EDID. This is simple code motion. No functional change is intended. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.10.I24f3646dd09954958645cc05c538909f169bf362@changeid | |||
2021-09-20 | drm/panel-edp: Move some wayward panels to the eDP driver | Douglas Anderson | |
Not all panels in panel-simple were marked what type of panel they were. I searched through ARM/ARM64 Chromebooks or Chromebook-related reference boards that I was aware of and found some panels that needed to be moved. I also skimmed for panels that had no mode and were "big" since it's quite rare to see a small eDP panel. Here's what I found: * auo,b101ean01 - rk3288-veyron-minnie * auo,b133htn01 - exynos5800-peach-pi * auo,b133xtn01 - tegra124-nyan-big * boe,nv101wxmn51 - rk3399-gru-bob * innolux,p120zdg-bf1 - sdm845-cheza * lg,lp079qx1-sp0v - rk3399-evb and similar * lg,lp097qx1-spa1 - According to commit 0355dde26e52 ("drm/panel: simple: Add support for LG LP097QX1-SPA1 panel") this is an eDP panel. * lg,lp129qe - tegra124-venice2 * samsung,lsn122dl01-c01 - According to commit 0330eaf39082 ("drm/panel: simple: Add support for Samsung LSN122DL01-C01 panel") this is an eDP panel. * samsung,ltn140at29-301 - tegra124-nyan-blaze * sharp,ld-d5116z01b - According to commit cd5e1cbe1f0a ("drm/panel: simple: Add support for Sharp LD-D5116Z01B panel") this is an eDP panel. * sharp,lq123p1jx31 - rk3399-gru-kevin * starry,kr122ea0sra - rk3399-gru-gru (reference board, not upstream) I won't promise that I didn't miss a single panel, but that's fairly complete I think. I'm not sure the full impact of the fact that they didn't have the connector type specified, but at least as of commit 9f069c6fbc72 ("drm/panel: panel-simple: add default connector_type") we may have been accidentally thinking of them as DPI panels. We also would certainly have had a warning. In any case since we don't want to support anything eDP in the old simple-panel driver, we should move these. Cc: Yakir Yang <ykk@rock-chips.com> Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.8.I84e36f9f86d5d693fce0641a55ddb264a518a947@changeid | |||
2021-09-20 | drm/panel-edp: Split eDP panels out of panel-simple | Douglas Anderson | |
The panel-simple driver handles way too much. Let's start trying to get a handle on it by splitting out the eDP panels. This patch does this: 1. Start by copying simple-panel verbatim over to a new driver, simple-panel-edp. 2. Rename "panel_simple" to "panel_edp" in the new driver. 3. Keep only panels marked with `DRM_MODE_CONNECTOR_eDP` in the new driver. Remove those panels from the old driver. 4. Remove all recent "DP AUX bus" stuff from the old driver. The DP AUX bus is only possible on DP panels. 5. Remove all DSI / MIPI related functions from the new driver. 6. Remove bus_format / bus_flags from eDP driver. These things don't seem to make any sense for eDP panels so let's stop filling in made up stuff. In the end we end up with a bunch of duplicated code for now. Future patches will try to address _some_ of this duplicated code though some of it will be unavoidable. NOTE: This may not actually move all eDP panels over to the new driver since not all panels were properly marked with `DRM_MODE_CONNECTOR_eDP`. A future patch will attempt to move wayward panels I could identify but even so there may be some missed. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.7.I0a2f75bb822d17ce06f5b147734764eeb0c3e3df@changeid |