| Age | Commit message (Collapse) | Author |
|---|
|
We currently use a single VC for sending commands and pixel data. The
LP/HS mode for pixel data is correctly set to HS by accident, as we have
set the VC to HS already earlier.
However, if we use a different VC for video data, the VC is in LP mode.
Fix this by always enabling HS mode before starting a frame update.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-70-tomi.valkeinen@ti.com
|
|
Simplify and optimize dsi_vc_enable_hs() so that it can be called
without checking the current HS/LP mode. Make dsi_vc_enable_hs() return
if the VC is already in the correct mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-69-tomi.valkeinen@ti.com
|
|
DSI virtual channel and hardware VC blocks have gotten tangled as
described in the previous commits. This has not caused any issues, as
the value for both is 0, so it happens to work.
To fix the issue, change the code to use the correct one of the two.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-68-tomi.valkeinen@ti.com
|
|
To start fixing the issues related to channels and vcs described in the
previous commit, pass vc and/or channel to various functions which will
need it do properly handle different DSI channels and VCs.
No functional changes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-67-tomi.valkeinen@ti.com
|
|
The "channel" usage in omap dsi driver is confusing. We have three
different "channels":
1) DSI virtual channel ID. This is a number from 0 to 3, included in the
packet payload.
2) VC. This is a register block in the DSI IP. There are four of those
blocks. A VC is a DSI "pipeline", with defined fifo settings, data
source (cpu or dispc), and some other settings. It has no relation to
the 1).
3) dispc channel. It's the "pipeline" number dispc uses to send pixel
data.
The previous patch handled the third case.
To start fixing 1) and 2), we first rename all uses of 'channel' to
'vc', as in most of the cases that is the correct thing to use.
However, in some places 1) and 2) have gotten mixed up (i.e. the code
uses msg->channel when it should use vc), which will be fixed in the
following patch.
Note that mixing 1) and 2) currently is "fine", as at the moment we only
support DSI peripherals with DSI virtual channel 0, and we always use
VC0 to send data. So both 1) and 2) are always 0.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-66-tomi.valkeinen@ti.com
|
|
The "channel" usage in omap dsi driver is confusing. As the first step,
change "channel" to "dispc_channel" when dealing with the dispc channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-65-tomi.valkeinen@ti.com
|
|
A DSI peripheral can have virtual channel ID of 0-3. This should be
always the case, and there's no need in the driver to validate the
channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-64-tomi.valkeinen@ti.com
|
|
The VC handling has gotten quite tangled up. As the first step to clean
it up, lets define that we only support a single DSI peripheral (which
was really already the case), and we always use VC0 (define VC_DEFAULT
0) register block to send data to the peripheral.
We can thus have a single mipi_dsi_device pointer and remove the
for-loops which made passes over all the four VCs (just the first one
was ever used).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-63-tomi.valkeinen@ti.com
|
|
The OMAP DSI command mode panel driver used to send page & column
address before each frame update, and this code was moved into the DSI
host driver when converting it to the DRM bridge model.
However, it's not really required to send the page & column address
before each frame. It's also something that doesn't really belong to the
DSI host driver, so we should drop the code.
That said, frame updates break if we don't send _something_ between the
frames. A NOP command does the trick.
It is not clear if this behavior is as expected from a DSI command mode
frame transfer, or is it a feature/issue with OMAP DSI driver, or a
feature/issue in the command mode panel used.
Most likely this is related to the following from the DSI spec:
"To enable PHY synchronization the host processor should periodically
end HS transmission and drive the Data Lanes to the LP state. This
transition should take place at least once per frame."
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-62-tomi.valkeinen@ti.com
|
|
The DSI host driver currently ignores the video mode flags in
client->mode_flags. Add the code to take the transfer mode from client's
mode_flags.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-60-tomi.valkeinen@ti.com
|
|
If the PLL calc function is given bad parameters, n_start/m_start may be
higher than n_stop/m_stop, which leads to the loops iterating through
the whole u32 number space.
Fix this by failing early on such cases.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-59-tomi.valkeinen@ti.com
|
|
dss_mgr_ops was needed with the multi-module architecture, but is no
longer needed. We can thus remove it and use direct calls.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-55-tomi.valkeinen@ti.com
|
|
dispc_ops was created to help with the multi-module architecture and
giving us the possibility of multiple dispc implementations. Neither of
these is valid anymore, and we can remove dispc_ops and use direct
calls to dispc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-54-tomi.valkeinen@ti.com
|
|
dssdev->owner is set, but never used. We can drop the field.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-53-tomi.valkeinen@ti.com
|
|
The functions in display.c are not used, so drop the file.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-52-tomi.valkeinen@ti.com
|
|
At the moment we have three different modules: omapdss-base, omapdss,
omapdrm. This setup is finally obsolete, as the last omapdrm specific
panel has been converted to DRM panel.
We can thus remove omapdss-base and omapdss, and just compile everything
into omapdrm.ko.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-51-tomi.valkeinen@ti.com
|
|
Simplify DSI pin config, which always originates from DT
nowadays. With the code being fully contained in the DSI
encoder, we can drop the public structure.
Since the function is no longer exposed, it now directly
takes the private DSI data pointer. This drops a pointless
conversion and means the pins can be configured earlier.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-49-tomi.valkeinen@ti.com
|
|
Move dsi_ops into the main structure, since all other ops
are gone. Instead of checking the device type we can simply
check if dsi_ops are set.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-48-tomi.valkeinen@ti.com
|
|
All displays are now using a drm_panel or a drm_bridge that models the
connector instead of dssdev, so this field is always 0 and can be
dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-47-tomi.valkeinen@ti.com
|
|
The omapdss device's ops_flags field is no longer
used and can be dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-46-tomi.valkeinen@ti.com
|
|
Since all encoders and panels are using the bridge API now,
we next pointer is no longer useful and can be dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-45-tomi.valkeinen@ti.com
|
|
All DSS devices have been converted to bridge API, so
the device operations are always NULL. This removes
the device ops function pointers and all code using it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-42-tomi.valkeinen@ti.com
|
|
In order to integrate with a chain of drm_bridge, the internal DSI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-41-tomi.valkeinen@ti.com
|
|
We can simply provide the device to the omapdrm driver
via pdata. omapdss_is_initialized() is no longer required
(even before this patch), since omapdrm device is only
registered after the pointer is initialized.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-39-tomi.valkeinen@ti.com
|
|
Implement check timings, which will check if it's possible to
configure the clocks for the provided mode using the same code
as the set_config() hook.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-35-tomi.valkeinen@ti.com
|
|
The table of compatible values needed to be prefixed with "omapdss,"
is empty, so all of this code is doing nothing now. Let's drop it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-34-tomi.valkeinen@ti.com
|
|
This converts the DSI module to expect common drm_panel display
drivers instead of dssdev based ones.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-33-tomi.valkeinen@ti.com
|
|
Due to previous changes the DSI encoder gets the capabilities
via DSI client's mode_flags and no longer needs the omapdss
specific caps. The core code now checks if the DSI encoder
is actually configured into command mode instead of just checking
the panel capabilities.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-32-tomi.valkeinen@ti.com
|
|
This moves the panel refresh/update function from the panel
driver into the DSI host driver to prepare for common drm_panel
support.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-30-tomi.valkeinen@ti.com
|
|
Move ULPS handling into the DSI host controller, so that we
no longer need a custom API for the DSI client.
Note that for now ULPS is always disabled.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-29-tomi.valkeinen@ti.com
|
|
Create a custom function pointer for ULPS and use it instead of
reusing disable/enable functions for ULPS mode switch. This allows
us to use the common disable/enable functions pointers for DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-28-tomi.valkeinen@ti.com
|
|
This moves the bus locking into the host driver and unexports
the custom API in preparation for drm_panel support.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-27-tomi.valkeinen@ti.com
|
|
Instead of using the custom enable_te() API, this automatically
enables/disables TE core support when a matching packet is sent
to the panel.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-26-tomi.valkeinen@ti.com
|
|
In preparation for removing custom DSS calls from the DSI
panel driver, this moves support for external tearing event
GPIOs into the DSI host driver. This way tearing events are
always handled in the core resulting in simplification of
the panel drivers.
The TE GPIO acquisition follows works in the same way as the
exynos DSI implementation.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-25-tomi.valkeinen@ti.com
|
|
Integrate low-power / high-speed bus switching into transfer
function and drop the omapdrm specific enable_hs() callback.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-24-tomi.valkeinen@ti.com
|
|
In order to reduce the amount of custom functionality, this moves
handling of pixel format and DSI mode from set_config() to dsi
attach.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-22-tomi.valkeinen@ti.com
|
|
The DSI sync() function only locks the bus and then releases
it again. Currently the only invocation is directly before
update(), which locks the bus anyways.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-21-tomi.valkeinen@ti.com
|
|
enable_te() is not used, so the custom API can be dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-20-tomi.valkeinen@ti.com
|
|
The get_te() callback is not used, so we can drop the
custom API.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-19-tomi.valkeinen@ti.com
|
|
memory_read is not used, so we can drop the code.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-18-tomi.valkeinen@ti.com
|
|
Drop custom request_vc/release_vc callbacks by using the
generic mipi_dsi_attach/mipi_dsi_detach functions.
To use mipi_dsi_attach() we need to fill in the mipi_dsi_device fields,
and some of these fields overlap with the fields in omap_dss_dsi_config.
In later patches the latter will get dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-15-tomi.valkeinen@ti.com
|
|
This moves from custom platform driver infrastructure to mipi_dsi_host
and mipi_dsi_device. Note, that this is a graduate step and the driver
only uses the devices types and transfer function, but not yet the new
device binding style or drm_panel.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-13-tomi.valkeinen@ti.com
|
|
Simplify the DSI encoder by using mipi_dsi_msg for
dsi_vc_send_long and dsi_vc_send_short. Further improvements
require cleaning up the channel allocation code first.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-12-tomi.valkeinen@ti.com
|
|
Simplify the read related message handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-11-tomi.valkeinen@ti.com
|
|
Simplify the write related messages handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-10-tomi.valkeinen@ti.com
|
|
This drops the virtual channel logic. Afterwards DSI clients
request their channel number and get the virtual channel with
the same number or -EBUSY if already in use.
The change here is not strictly speaking correct, as it combines the VC
(DSI's "configuration block") and virtual channel ID (the ID sent in the
DSI packets). But as we currently only support a single DSI command mode
panel, this works fine: we always use VC0, and VC ID 0.
This needs more work to support video mode panels, but that can be done
after moving to DRM bridge and panel model, after which we can do that
work with the proper APIs.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-9-tomi.valkeinen@ti.com
|
|
After converting all DSI drivers, unexport the specific transfer
functions.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-8-tomi.valkeinen@ti.com
|
|
This prepares the driver for becoming a mipi_dsi_host implementation,
which provides a generic transfer function instead of all kind of
different read/write functions. The implementation will become more
elegant after unexporting the specific functions in the following
patches.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-6-tomi.valkeinen@ti.com
|
|
The write buffers are not modified, so they can be constant.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-5-tomi.valkeinen@ti.com
|
|
This replaces OMAP specific enum for pixel format with
common implementation.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-4-tomi.valkeinen@ti.com
|
