summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/nouveau/include
AgeCommit message (Collapse)Author
2020-01-15drm/nouveau/flcn/msgq: pass explicit message queue pointer to recv()Ben Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: move handling of init message to subdevsBen Skeggs
When the PMU/SEC2 LS FWs have booted, they'll send a message to the host with various information, including the configuration of message/command queues that are available. Move the handling for this to the relevant subdevs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: move command generation to subdevsBen Skeggs
This moves the code to generate commands for the ACR unit of the PMU/SEC2 LS firmwares to those subdevs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: rename cmdq-related nvkm_msqqueue_queue to ↵Ben Skeggs
nvkm_falcon_cmdq Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: implement a more explicit send() interfaceBen Skeggs
Takes the command queue pointer directly instead of requiring a function to lookup based on an queue type, as well as an explicit timeout value. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: split the condition for queue readiness vs pmu acr ↵Ben Skeggs
readiness This is to allow for proper separation of the LS interface code from the queue handling code. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/qmgr: allow arbtrary priv + return code for callbacksBen Skeggs
Code to interface with LS firmwares is being moved to the subdevs where it belongs, rather than living in the common falcon code. Arbitrary private data passed to callbacks is to allow for something other than struct nvkm_msgqueue to be passed into the callback (like the pointer to the subdev itself, for example), and the return code will be used where we'd like to detect failure from synchronous messages. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/msgq: explicitly create message queue from subdevsBen Skeggs
Code to interface with LS firmwares is being moved to the subdevs where it belongs, rather than living in the common falcon code. This is an incremental step towards that goal. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/cmdq: explicitly create command queue(s) from subdevsBen Skeggs
Code to interface with LS firmwares is being moved to the subdevs where it belongs, rather than living in the common falcon code. This is an incremental step towards that goal. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn/qmgr: explicitly create queue manager from subdevsBen Skeggs
Code to interface with LS firmwares is being moved to the subdevs where it belongs, rather than living in the common falcon code. This is an incremental step towards that goal. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: add printk macrosBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: reset sec2/gsp falcons harderBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: specify queue register offsets from subdevBen Skeggs
Also fixes the values for Turing, even though we don't use it yet. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: specify debug/production register offset from subdevBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: specify EMEM address from subdevBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: move bind_context WAR out of common codeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: specify FBIF offset from subdevBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/nvenc: add a stub implementation for the GPUs where it should be ↵Ben Skeggs
supported Mostly so we don't lose info hidden in falcon. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/nvdec/gm107: rename from gp102 implementationBen Skeggs
NVDEC is available from GM107, and we currently only have a stub implementation anyway, let's make it explicit. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/nvdec: initialise SW state for falcon from constructorBen Skeggs
This will allow us to register the falcon with ACR, and further customise its behaviour by providing the nvkm_falcon_func structure directly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/nvdec: select implementation based on available fwBen Skeggs
This will allow for further customisation of the subdev depending on what firmware is available. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/sec2: use falcon funcsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/sec2: initialise SW state for falcon from constructorBen Skeggs
This will allow us to register the falcon with ACR, and further customise its behaviour by providing the nvkm_falcon_func structure directly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/sec2: select implementation based on available firmwareBen Skeggs
This will allow for further customisation of the subdev depending on what firmware is available. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/sec2/gp108: split from gp102 implementationBen Skeggs
ACR LS FW loading is moving out of SECBOOT and into their specific subdevs, and the available GP108/GV100 FWs differ from the other GP10x boards. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/gr/gp108: split from gp107Ben Skeggs
ACR LS FW loading is moving out of SECBOOT and into their specific subdevs, and the available GP107/GP108 FWs have interface differences. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/pmu: initialise SW state for falcon from constructorBen Skeggs
This will allow us to register the falcon with ACR, and further customise its behaviour by providing the nvkm_falcon_func structure directly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/pmu/gp10b: split from gm20b implementationBen Skeggs
ACR LS FW loading is moving out of SECBOOT and into their specific subdevs, and the available GM20B/GP10B FWs have interface differences. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/gsp: initialise SW state for falcon from constructorBen Skeggs
This will allow us to register the falcon with ACR, and further customise its behaviour by providing the nvkm_falcon_func structure directly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/acr: add loaders for currently available LS firmware imagesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/acr: add stub implementation for all GPUs currently supported by ↵Ben Skeggs
SECBOOT PMU, SEC2 and GR will be modified to register their falcons with ACR before the main commit switching everything over. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/core: define ACR subdevBen Skeggs
This will replace the current SECBOOT subdev for handling firmware on secure falcons. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/core: add representation of generic binary objectsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/core: add a macro to better handle multiple firmware versionsBen Skeggs
Will be used in upcoming commits to allow subdevs to better customise themselves based on which (if any) firmware is available. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: export existing funcsBen Skeggs
These will be used in upcoming commits which will provide more customisation. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/flcn: move fetching of configuration until first useBen Skeggs
We want to be able to register falcons with ACR during the constructor for the subdev it belongs to, however, we may not have access to the falcon's registers prior to DEVINIT. Delay touching registers until the first time the falcon is acquired. This may temporarily break secboot on non-production boards due to not being able to determine whether the falcon is in debug or production mode, the new ACR subdev will not have this issue, and it's not a use-case that's terribly important for bisectability. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/mmu: Add correct turing page kindsJames Jones
Turing introduced a new simplified page kind scheme, reducing the number of possible page kinds from 256 to 16. It also is the first NVIDIA GPU in which the highest possible page kind value is not reserved as an "invalid" page kind. To address this, the invalid page kind is made an explicit property of the MMU HAL, and a new table of page kinds is added to the tu102 MMU HAL. One hardware change not addressed here is that 0x00 is technically no longer a supported page kind, and pitch surfaces are instead intended to share the block-linear generic page kind 0x06. However, because that will be a rather invasive change to nouveau and 0x00 still works fine in practice on Turing hardware, addressing this new behavior is deferred. Signed-off-by: James Jones <jajones@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/ltc/gp10b: Add custom L2 cache implementationThierry Reding
There are extra registers that need to be programmed to make the level 2 cache work on GP10B, such as the stream ID register that is used when an SMMU is used to translate memory addresses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2020-01-15drm/nouveau/fault: Add support for GP10BThierry Reding
There is no BAR2 on GP10B and there is no need to map through BAR2 because all memory is shared between the GPU and the CPU. Add a custom implementation of the fault sub-device that uses nvkm_memory_addr() instead of nvkm_memory_bar2() to return the address of a pinned fault buffer. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-08-23drm/nouveau/gpio: check function 76 in the power check as wellMark Menzynski
Added GPIO is "Power Alert". It's uncertain if this GPIO is set on GPU initialization or only if a change is detected by the GPU at runtime. This GPIO can be found on Tesla and sometimes on Fermi GPUs. Untested, wrote according to documentation. Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-08-23drm/nouveau/gpio: check the gpio function 16 in the power check as wellMark Menzynski
Added GPIO is "Thermal and External Power Detect". It's uncertain if this GPIO is set on GPU initialization or only if a change is detected by the GPU at runtime. This GPIO can be found in Rankine and Curie and rarely on Tesla GPUs VBIOS. Untested, wrote according to documentation. Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-08-23drm/nouveau/gpio: fail if gpu external power is missingMark Menzynski
Currently, nouveau doesn't check if GPU is missing power. This patch makes nouveau fail when this happens on latest GPUs. It checks GPIO function 121 (External Power Emergency), which should detect power problems on GPU initialization. This can be disabled with nouveau.config=NvPowerChecks=1 Tested on TU104, GP106 and GF100. v3: * Add config override for disabling power checks Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-08-23drm/nouveau/bios/gpio: sort gpios by valuesMark Menzynski
One gpio was in wrong place, moved it for better readability. Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-08-23drm/nouveau/therm: don't attempt fan control where PMU is already managing itBen Skeggs
There's already a condition in place which attempts to detect this, but since we've begun to require a PMU subdev even on boards where we don't load a custom FW, it's become inaccurate. This will prevent unnecessarily running a periodic fan update thread on GP100 and newer, where we don't yet override the default PMU FW. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-08-23drm/nouveau/therm: skip probing for devices not specified in thermal tablesBen Skeggs
Saves some time during driver load, as described by the relevant section[1] of the DCB 4.x specification. [1] https://nvidia.github.io/open-gpu-doc/DCB/DCB-4.x-Specification.html#_i2c_device_table Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19drm/nouveau: fix bogus GPL-2 license headerIlia Mirkin
The bulk SPDX addition made all these files into GPL-2.0 licensed files. However the remainder of the project is MIT-licensed, these files (primarily header files) were simply missing the boiler plate and got caught up in the global update. Fixes: b24413180f5 (License cleanup: add SPDX GPL-2.0 license identifier to files with no license) Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-06-07drm/nouveau/core: support versioned firmware loadingBen Skeggs
We have a need for this now with updated SEC2 LS FW images that have an incompatible interface from the previous version. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-06-07drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than deviceBen Skeggs
It'd be nice to have FW loading debug messages to appear for the relevant subsystem, when enabled. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-05-01drm/nouveau/i2c: Disable i2c bus access after ->fini()Lyude Paul
For a while, we've had the problem of i2c bus access not grabbing a runtime PM ref when it's being used in userspace by i2c-dev, resulting in nouveau spamming the kernel log with errors if anything attempts to access the i2c bus while the GPU is in runtime suspend. An example: [ 130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff Since the GPU is in runtime suspend, the MMIO region that the i2c bus is on isn't accessible. On x86, the standard behavior for accessing an unavailable MMIO region is to just return ~0. Except, that turned out to be a lie. While computers with a clean concious will return ~0 in this scenario, some machines will actually completely hang a CPU on certian bad MMIO accesses. This was witnessed with someone's Lenovo ThinkPad P50, where sensors-detect attempting to access the i2c bus while the GPU was suspended would result in a CPU hang: CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1 Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017 RIP: 0010:ioread32+0x2b/0x30 Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3 48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f 40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48 RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13 RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186 RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4 RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7 R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000 R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000 FS: 00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: g94_i2c_aux_xfer+0x326/0x850 [nouveau] nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau] __i2c_transfer+0x14b/0x620 i2c_smbus_xfer_emulated+0x159/0x680 ? _raw_spin_unlock_irqrestore+0x1/0x60 ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0 ? __lock_is_held+0x59/0xa0 __i2c_smbus_xfer+0x138/0x5a0 i2c_smbus_xfer+0x4f/0x80 i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev] i2cdev_ioctl+0x1db/0x2c0 [i2c_dev] do_vfs_ioctl+0x408/0x750 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f25317f546b Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003 RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0 R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80 R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0 watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438] Yikes! While I wanted to try to make it so that accessing an i2c bus on nouveau would wake up the GPU as needed, airlied pointed out that pretty much any usecase for userspace accessing an i2c bus on a GPU (mainly for the DDC brightness control that some displays have) is going to only be useful while there's at least one display enabled on the GPU anyway, and the GPU never sleeps while there's displays running. Since teaching the i2c bus to wake up the GPU on userspace accesses is a good deal more difficult than it might seem, mostly due to the fact that we have to use the i2c bus during runtime resume of the GPU, we instead opt for the easiest solution: don't let userspace access i2c busses on the GPU at all while it's in runtime suspend. Changes since v1: * Also disable i2c busses that run over DP AUX Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-02-20drm/nouveau/fault/gv100-: expose VoltaFaultBufferABen Skeggs
This nvclass exposes the replayable fault buffer, which will be used by SVM to manage GPU page faults. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 11:11:13 +0000