| Age | Commit message (Collapse) | Author |
|---|
|
During system shutdown nouveau might not be able to request firmware from
Userspace, which then leads to a regression preventing the system from
shutting down.
Cache the scrubber binary for this case.
Fixes: 0e44c21708761 ("drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7Uf5=K44y8YLsiy0aMnc1zvGEQdeDe7RQF=AV+fxxzuQ@mail.gmail.com
|
|
Turing apparently needs to use the same register we use on Ampere.
Not executing the scrubber ucode when required would result in large
areas of VRAM being inaccessible to the driver.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-2-bskeggs@redhat.com
|
|
v2:
- whitespace
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
|
|
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
|
|
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>
|
|
Needed to support Ampere differences in gr/gf100-:
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
These differ on Ampere.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Will be used to improve gr reset on GF100 and newer.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- useful to distinguish between different issues.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Adds context binding and support for FWs with a bootloader to the code
that was added to load VPR scrubber HS binaries, and ports ACR over to
using all of it.
- gv100 split from gp108 to handle FW exit status differences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Under memory load, instmem allocations could end up in the regions of
VRAM that are inaccessible right after boot, and be corrupted after a
suspend/resume cycle as a result of being restored before booting the
mem unlock firmware.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- also executes pre-DEVINIT, so early boot is able to DMA sysmem
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Adds the start of common interfaces to load and boot the HS binaries
provided by NVIDIA that enable the usage of GR.
ACR already handles most of this, but it's very much tied into ACR's
init process, and there's other code that could benefit from reusing
a lot of this stuff too (ie. VBIOS DEVINIT/PreOS, VPR scrubber).
The VPR scrubber code is fairly independent, and a good first target.
- adds better debug output to fw loading process, to ease bring-up/debug
v2:
- whitespace, 0->false
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Mostly preparation to fit in Ampere changes, but should result in reset
sequences a lot closer to RM's, and perhaps help out with the issues we
sometimes see reported in this area.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Reset regs won't be available on Ampere while SEC2 RTOS is running, and
we're apparently supposed to be doing this on earlier GPUs too.
v2:
- fixed some excessive indentation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Cleanup before falcon changes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Ampere.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- replaces the hacked-up version that existed solely to support TTM
v2. remove earlier hack preventing use of non-stall intr for fences
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
- replaces the hacked-up version that existed solely to support TTM
- noop until the next commit, adding proper support for ampere host
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Exposes a bunch of the new features that became possible as a result
of the earlier commits. DRM will build on this in the future to add
support for features such as SCG ("async compute") and multi-device
rendering, as part of the work necessary to be able to write a half-
decent vulkan driver - finally.
For the moment, this just crudely ports DRM to the API changes.
- channel class interfaces now the same for all HW classes
- channel group class exposed (SCG)
- channel runqueue selector exposed (SCG)
- channel sub-device id control exposed (multi-device rendering)
- channel names in logging will reflect creating process, not fd owner
- explicit USERD allocation required by VOLTA_CHANNEL_GPFIFO_A and newer
- drm is smarter about determining the appropriate channel class to use
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Builds on the context tracking that was added earlier.
- marks engine context PTEs as 'priv' where possible
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- adds support for specifying SUBDEVICE_ID for channel
- rounds non-power-of-two GPFIFO sizes down, rather than up
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
And use it to cleanup multiple implementations of almost the same thing.
- prepares for non-polled / client-provided USERD
- only zeroes relevant "registers", rather than entire USERD
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Currently provided by {chan,dma,gpfifo}*.c, and those are going away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- less dependence on waiting for runlist updates, on GPUs that allow it
- supports runqueue selector in RAMRL entries
- completes switch to common runl/cgrp/chan topology info
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- nvkm_chan_error() built on top, stops channel and sends 'killed' event
- removes an odd double-bashing of channel enable regs on kepler and up
- pokes doorbell on turing and up, after enabling channel
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- adds g8x/turing registers, which were missing before
- switches fermi to polled wait, like later hw (see: 4f2fc25c0f8bc...)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Channel groups have somewhat more complicated requirements than what we
currently support. An engine context is shared between all channels in
a channel group, VEID/subctx support (later) brings per-VEID components,
and we need to track an individual channel's engine context pointers.
This commit adds the structures and refcounting to support the above,
wrapping the prior implementation for the moment.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- supports per-runlist CHIDs
- channel group lock held across reference, rather than global lock
v2:
- remove unnecessary parenthesis
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- removes a layer of indirection in the intr handling
- prevents non-stall ctrl racing with unknown intrs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Engine context tracking will move to nvkm_cgrp in later commits, so we
create SW-only channel groups on HW without support for them.
- switches to nvkm_chid for TSG/channel ID allocation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Creates an nvkm_runl for each runlist on the GPU, and an nvkm_engn for
each engine that is reachable from a runlist.
- basically what gk104- already does, but extended to all chips
- adds per-runlist CHID allocators (Ampere)
- splits g98/gt2xx out from g84 (different target engines)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Creates an nvkm_runq for each PBDMA, these will be associated with the
relevant runlist(s) later.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
We need to be able to allocate TSG IDs as well as channel IDs, also,
Ampere has per-runlist channel IDs.
- holds per-ID private data, which will be used for/to protect lookup
- holds an nvkm_event which will be used for events tied to IDs
- not used yet beyond setup, and switching use of "fifo->nr - 1" for
channel ID mask to "chid->mask"
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Adds the basic skeleton for common channel (group) interfaces.
- common behaviour between <gk104 and >=gk104 impl's
- separates priv/user channel objects
- passthrough to existing object for now, kludges removed later
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- reads channel count from GPU from gm200 onwards
- removes gm20b/gp10b (they become identical to gm200/gp100)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Will be used to init client-allocated USERD to default values.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Displays both owner/user of the falcon (when they differ), and takes
both subdevs' debug levels into account when deciding whether to log
the message.
- runlist debugging will use one of the alternate macros added here
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
This wasn't really needed before; the main place this could race is with
channel recovery, but (through potentially fragile means) shouldn't have
been possible.
However, a number of upcoming patches benefit from having better control
over subdev init, necessitating some improvements here.
- allows subdev/engine oneinit() without init() (host/fifo patches)
- merges engine use locking/tracking into subdev, and extends it to fix
some issues that will arise with future usage patterns (acr patches)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- new-style handlers can now be used here too
- decent clean-up
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- reads vectors from HW, rather than being hardcoded
- removes hacks to support routing via old interfaces
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- switches ampere over now, and removes its hack mc implementation
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
- uses proper class IDs for Turing/Ampere
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Initially for NV_USERMODE class, and Turing/Ampere's new interrupt tree.
v2. fixup for ga103 early merge
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
It's quite a lot of tedious and error-prone work to switch over all the
subdevs at once, so allow an nvkm_intr to request new-style handlers to
be created that wrap the existing interfaces.
This will allow a more gradual transition.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Turing adds a second top-level interrupt tree in HW, in addition to the
trees available via NV_PMC. Most of the interrupts we care about are
exposed in both trees, but not all of them, and we have some rather
nasty hacks to route the fault buffer interrupts.
Ampere removes the NV_PMC trees entirely.
Here we add some infrastructure to be able to handle all of this more
cleanly, as well as providing more explicit control over handlers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
Unifies the handling between PCI-based and Tegra GPUs, and makes more
explicit/obvious where device interrupts can be expected.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
We're going to want this information available earlier than it is now.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
