summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)Author
2023-08-02drm/msm/dpu: rework indentation in dpu_core_perfDmitry Baryshkov
dpu_core_perf.c contains several multi-line conditions which are hard to comprehent because of the indentation. Rework the identation of these conditions to make it easier to understand them. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550197/ Link: https://lore.kernel.org/r/20230730010102.350713-5-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: drop separate dpu_core_perf_tune overridesDmitry Baryshkov
The values in struct dpu_core_perf_tune are fixed per the core perf mode. Drop the 'tune' values and substitute them with known values when performing perf management. Note: min_bus_vote was not used at all, so it is just silently dropped. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550208/ Link: https://lore.kernel.org/r/20230730010102.350713-4-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: bail from _dpu_core_perf_crtc_update_bus if there are no ICC pathsDmitry Baryshkov
Skip bandwidth aggregation and return early if there are no interconnect paths defined for the DPU device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/550195/ Link: https://lore.kernel.org/r/20230730010102.350713-3-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: drop enum dpu_core_perf_data_bus_idDmitry Baryshkov
Drop the leftover of bus-client -> interconnect conversion, the enum dpu_core_perf_data_bus_id. Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550194/ Link: https://lore.kernel.org/r/20230730010102.350713-2-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: drop BWC features from DPU_MDP_foo namespaceDmitry Baryshkov
The feature bits DPU_MDP_BWC, DPU_MDP_UBWC_1_0, and DPU_MDP_UBWC_1_5 are not used by the driver, drop them completely. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/550056/ Link: https://lore.kernel.org/r/20230728213320.97309-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-08-02drm/msm/dpu: drop UBWC configurationDmitry Baryshkov
As the DPU driver has switched to fetching data from MDSS driver, we can now drop the UBWC and highest_bank_bit parts of the DPU hw catalog. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550058/ Link: https://lore.kernel.org/r/20230728213320.97309-7-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: use MDSS data for programming SSPPDmitry Baryshkov
Switch to using data from MDSS driver to program the SSPP fetch and UBWC configuration. As a side-effect, this also swithes the DPU driver from DPU_HW_UBWC_VER_xx values to the UBWC_x_y enum, which reflects the hardware register values. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/550054/ Link: https://lore.kernel.org/r/20230728213320.97309-6-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/mdss: populate missing dataDmitry Baryshkov
As we are going to use MDSS data for DPU programming, populate missing MDSS data. The UBWC 1.0 and no UBWC cases do not require MDSS programming, so skip them. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/550055/ Link: https://lore.kernel.org/r/20230728213320.97309-5-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/mdss: export UBWC dataDmitry Baryshkov
DPU programming requires knowledge of some of UBWC parameters. This results in duplication of UBWC data between MDSS and DPU drivers. Export the required data from MDSS driver. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550052/ Link: https://lore.kernel.org/r/20230728213320.97309-4-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/mdss: rename ubwc_version to ubwc_enc_versionDmitry Baryshkov
Rename the ubwc_version field to ubwc_enc_version, it denotes the version of the UBWC encoder, not the "UBWC version". Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550051/ Link: https://lore.kernel.org/r/20230728213320.97309-3-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/mdss: correct UBWC programming for SM8550Dmitry Baryshkov
The SM8550 platform employs newer UBWC decoder, which requires slightly different programming. Fixes: a2f33995c19d ("drm/msm: mdss: add support for SM8550") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/550049/ Link: https://lore.kernel.org/r/20230728213320.97309-2-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: drop compatibility INTR definesDmitry Baryshkov
While reworking interrupts masks, it was easier to keep old MDP_INTFn_7xxx_INTR and MDP_INTFn_7xxx_TEAR_INTR symbols. Now it is time to drop them and use unified symbol names. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/549656/ Link: https://lore.kernel.org/r/20230727144543.1483630-6-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: drop now-unused mdss_irqs field from hw catalogDmitry Baryshkov
Now as the list of the interrupts is constructed from the catalog data, drop the mdss_irqs field from catalog. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/549659/ Link: https://lore.kernel.org/r/20230727144543.1483630-5-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: autodetect supported interruptsDmitry Baryshkov
Declaring the mask of supported interrupts proved to be error-prone. It is very easy to add a bit with no corresponding backing block or to miss the INTF TE bit. Replace this with looping over the enabled INTF blocks to setup the irq mask. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/549654/ Link: https://lore.kernel.org/r/20230727144543.1483630-4-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: split interrupt address arraysDmitry Baryshkov
There is no point in having a single enum (and a single array) for both DPU < 7.0 and DPU >= 7.0 interrupt registers. Instead define a single enum and two IRQ address arrays. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Fixes: c7314613226a0 ("drm/msm: Add missing struct identifier") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/549653/ Link: https://lore.kernel.org/r/20230727144543.1483630-3-dmitry.baryshkov@linaro.org
2023-08-02drm/msm/dpu: inline __intr_offsetDmitry Baryshkov
Inline __intr_offset(), there is no point in having a separate oneline function for setting base block address. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/549655/ Link: https://lore.kernel.org/r/20230727144543.1483630-2-dmitry.baryshkov@linaro.org
2023-08-02drm/msm: Remove redundant DRM_DEV_ERROR()Ruan Jinjie
There is no need to call the DRM_DEV_ERROR() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/549499/ Link: https://lore.kernel.org/r/20230727112407.2916029-1-ruanjinjie@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-31fbdev: Align deferred I/O with naming of helpersThomas Zimmermann
Deferred-I/O generator macros generate callbacks for struct fb_ops that operate on memory ranges in I/O address space or system address space. Rename the macros to use the _IOMEM_ and _SYSMEM_ infixes of their underlying helpers. Adapt all users. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-5-tzimmermann@suse.de
2023-07-31fbdev: Use _SYSMEM_ infix for system-memory helpersThomas Zimmermann
Change the infix for fbdev's system-memory helpers from _SYS_ to _SYSMEM_. The helpers perform operations within system memory, but not on the state of the operating system itself. Naming should make this clear. Adapt all users. No functional changes. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-3-tzimmermann@suse.de
2023-07-28Merge tag 'drm-msm-fixes-2023-07-27' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.5-rc4 Display: + Fix to correct the UBWC programming for decoder version 4.3 seen on SM8550 + Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs. + Fix to drop the unused dpu_core_perf_data_bus_id enum from the code + Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI cfg. GPU: + Fix warn splat for newer devices without revn + Remove name/revn for a690.. we shouldn't be populating these for newer devices, for consistency, but it slipped through review + Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes instead of dwords, causing AHB faults on a6xx gen4/a660-family) + Disallow submit with fence id 0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs9MwCSfiyv8i7yWAsJKYEzCDyzaTx=ujX80Y23rZd9RA@mail.gmail.com
2023-07-27drm/msm/dsi: Reuse QCM2290 14nm DSI PHY configuration for SM6125Marijn Suijten
SM6125 features only a single PHY (despite a secondary PHY PLL source being available to the disp_cc_mdss_pclk0_clk_src clock), and downstream sources for this "trinket" SoC do not define the typical "vcca" regulator to be available nor used. This, including the register offset is identical to QCM2290, whose config struct can trivially be reused. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/548980/ Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-13-a3f287dd6c07@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/mdss: Add SM6125 supportMarijn Suijten
SM6125 has an UBWC 3.0 decoder but only an UBWC 1.0 encoder. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/548974/ Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-11-a3f287dd6c07@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: Add SM6125 supportMarijn Suijten
Add definitions for the display hardware used on the Qualcomm SM6125 platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/548978/ Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-10-a3f287dd6c07@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY configMarijn Suijten
The regulator setup was likely copied from other SoCs by mistake. Just like SM6125 the DSI PHY on this platform is not getting power from a regulator but from the MX power domain. Fixes: 572e9fd6d14a ("drm/msm/dsi: Add phy configuration for QCM2290") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/548959/ Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-1-a3f287dd6c07@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: drop DPU_INTF_DATA_COMPRESS from dpu catalogAbhinav Kumar
Now that all usages of DPU_INTF_DATA_COMPRESS have been replaced with the dpu core's major revision lets drop DPU_INTF_DATA_COMPRESS from the catalog completely. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/546808/ Link: https://lore.kernel.org/r/20230712012003.2212-6-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: rename enable_compression() to program_intf_cmd_cfg()Abhinav Kumar
Rename the intf's enable_compression() op to program_intf_cmd_cfg() and allow it to accept a struct intf_cmd_mode_cfg to program all the bits at once. This can be re-used by widebus later on as well as it touches the same register. changes in v5: - rename struct intf_cmd_mode_cfg to dpu_hw_intf_cmd_mode_cfg - remove couple of comments Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/546806/ Link: https://lore.kernel.org/r/20230712012003.2212-5-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: rename all hw_intf structs to have dpu_hw prefixAbhinav Kumar
dpu_hw_intf has a few instances of structs which do not have the dpu_hw prefix. Lets fix this by renaming those structs and updating the usage of those accordingly. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/546805/ Link: https://lore.kernel.org/r/20230712012003.2212-4-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: use dpu core's major version to enable data compressAbhinav Kumar
Instead of using a feature bit to decide whether to enable data compress or not for DSC use-cases, use dpu core's major version instead by assigning the enable_compression op based on the dpu core's major version. To make this possible pass the struct dpu_mdss_version to dpu_hw_intf_init(). This will avoid defining feature bits for every bit level details of registers. changes in v5: - none Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546803/ Link: https://lore.kernel.org/r/20230712012003.2212-3-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: re-introduce dpu core revision to the catalogAbhinav Kumar
Introduce the dpu core revision back as an entry to the catalog so that we can just use dpu revision checks and enable those bits which should be enabled unconditionally and not controlled by a catalog and also simplify the changes to do something like: if (dpu_core_revision > xxxxx && dpu_core_revision < xxxxx) enable the bit; changes in v5: - fix the commit text to remove instances of DPU_HW_VER Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546801/ Link: https://lore.kernel.org/r/20230712012003.2212-2-quic_abhinavk@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dsi: Enable BURST_MODE for command mode for DSI 6G v1.3+Jessica Zhang
During a frame transfer in command mode, there could be frequent LP11 <-> HS transitions when multiple DCS commands are sent mid-frame or if the DSI controller is running on slow clock and is throttled. To minimize frame latency due to these transitions, it is recommended to send the frame in a single burst. This feature is supported for DSI 6G 1.3 and above, thus enable burst mode if supported. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/544551/ Link: https://lore.kernel.org/r/20230608-b4-add-burst-mode-v2-1-2ff468457d46@quicinc.com [DB: fixed indentation] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: Update dev core dump to dump registers of sub-blocksRyan McCann
Currently, the device core dump mechanism does not dump registers of sub-blocks within the DSPP, SSPP, DSC, and PINGPONG blocks. Edit dpu_kms_mdp_snapshot function to account for sub-blocks. Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546192/ Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-6-67e8b66c4723@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: Refactor printing of main blocks in device core dumpRyan McCann
Currently, the names of main blocks are hardcoded into the msm_disp_snapshot_add_block function rather than using the name that already exists in the catalog. Change this to take the name directly from the catalog instead of hardcoding it. Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/546194/ Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-5-67e8b66c4723@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: Remove redundant prefix/suffix in name of sub-blocksRyan McCann
For a device core dump, the registers of sub-blocks are printed under a title formatted as <mainBlkName_sblkName>. For example, the csc sub-block for an SSPP main block "sspp_0" would be printed "sspp_0_sspp_csc0". The title is clearly redundant due to the duplicate "sspp" and "0" that exist in both the mainBlkName and sblkName. To eliminate this redundancy, remove the secondary "sspp" and "0" that exist in the sub-block name by elimanting the "sspp_" prefix and the concatenation of "num" that results in the redundant "0" suffix. Remove num parameter altogether from relevant macros as a consequence of it no longer being used. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546198/ Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-4-67e8b66c4723@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: Define names for unnamed sblksRyan McCann
Some sub-blocks in the hw catalog have not been given a name, so when the registers from that block are dumped, there is no name to reference. Define names for relevant sub-blocks to fix this. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546199/ Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-3-67e8b66c4723@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm/dpu: Drop unused num argument from relevant macrosRyan McCann
Drop unused parameter "num" from VIG_SBLK_NOSCALE and DMA sub-block macros. Update calls to relevant macros to reflect change. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546196/ Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-2-67e8b66c4723@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-27drm/msm: Update dev core dump to not print backwardsRyan McCann
Device core dump add block method adds hardware blocks to dumping queue with stack behavior which causes the hardware blocks to be printed in reverse order. Change the addition to dumping queue data structure from "list_add" to "list_add_tail" for FIFO queue behavior. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546200/ Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-07-26drm/msm: Disallow submit with fence id 0Rob Clark
A fence id of zero is expected to be invalid, and is not removed from the fence_idr table. If userspace is requesting to specify the fence id with the FENCE_SN_IN flag, we need to reject a zero fence id value. Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/549180/
2023-07-24Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v6.5-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-07-21drm: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
2023-07-17drm/msm: Fix hw_fence error path cleanupRob Clark
In an error path where the submit is free'd without the job being run, the hw_fence pointer is simply a kzalloc'd block of memory. In this case we should just kfree() it, rather than trying to decrement it's reference count. Fortunately we can tell that this is the case by checking for a zero refcount, since if the job was run, the submit would be holding a reference to the hw_fence. Fixes: f94e6a51e17c ("drm/msm: Pre-allocate hw_fence") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/547088/
2023-07-17drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb()Gaosheng Cui
The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null is catastrophic here, so we should use IS_ERR_OR_NULL() to check the return value. Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/547712/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-07-17Merge tag 'drm-misc-next-2023-07-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.6: UAPI Changes: * fbdev: * Make fbdev userspace interfaces optional; only leaves the framebuffer console active * prime: * Support dma-buf self-import for all drivers automatically: improves support for many userspace compositors Cross-subsystem Changes: * backlight: * Fix interaction with fbdev in several drivers * base: Convert struct platform.remove to return void; part of a larger, tree-wide effort * dma-buf: Acquire reservation lock for mmap() in exporters; part of an on-going effort to simplify locking around dma-bufs * fbdev: * Use Linux device instead of fbdev device in many places * Use deferred-I/O helper macros in various drivers * i2c: Convert struct i2c from .probe_new to .probe; part of a larger, tree-wide effort * video: * Avoid including <linux/screen_info.h> Core Changes: * atomic: * Improve logging * prime: * Remove struct drm_driver.gem_prime_mmap plus driver updates: all drivers now implement this callback with drm_gem_prime_mmap() * gem: * Support execution contexts: provides locking over multiple GEM objects * ttm: * Support init_on_free * Swapout fixes Driver Changes: * accel: * ivpu: MMU updates; Support debugfs * ast: * Improve device-model detection * Cleanups * bridge: * dw-hdmi: Improve support for YUV420 bus format * dw-mipi-dsi: Fix enable/disable of DSI controller * lt9611uxc: Use MODULE_FIRMWARE() * ps8640: Remove broken EDID code * samsung-dsim: Fix command transfer * tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups * Cleanups * ingenic: * Kconfig REGMAP fixes * loongson: * Support display controller * mgag200: * Minor fixes * mxsfb: * Support disabling overlay planes * nouveau: * Improve VRAM detection * Various fixes and cleanups * panel: * panel-edp: Support AUO B116XAB01.4 * Support Visionox R66451 plus DT bindings * Cleanups * ssd130x: * Support per-controller default resolution plus DT bindings * Reduce memory-allocation overhead * Cleanups * tidss: * Support TI AM625 plus DT bindings * Implement new connector model plus driver updates * vkms * Improve write-back support * Documentation fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
2023-07-15drm/msm/adreno: Fix snapshot BINDLESS_DATA sizeRob Clark
The incorrect size was causing "CP | AHB bus error" when snapshotting the GPU state on a6xx gen4 (a660 family). Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/26 Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Patchwork: https://patchwork.freedesktop.org/patch/546763/
2023-07-15drm/msm/a690: Remove revn and nameRob Clark
These fields are deprecated. But any userspace new enough to support a690 also knows how to identify the GPU based on chip-id. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/545552/
2023-07-15drm/msm/adreno: Fix warn splat for devices without revnRob Clark
Recently, a WARN_ON() was introduced to ensure that revn is filled before adreno_is_aXYZ is called. This however doesn't work very well when revn is 0 by design (such as for A635). Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Fixes: cc943f43ece7 ("drm/msm/adreno: warn if chip revn is verified before being set") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280 Patchwork: https://patchwork.freedesktop.org/patch/545554/
2023-07-13drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY configMarijn Suijten
The regulator setup was likely copied from other SoCs by mistake. Just like SM6125 the DSI PHY on this platform is not getting power from a regulator but from the MX power domain. Fixes: 572e9fd6d14a ("drm/msm/dsi: Add phy configuration for QCM2290") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/544536/ Link: https://lore.kernel.org/r/20230627-sm6125-dpu-v2-1-03e430a2078c@somainline.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-07-13drm/msm/dpu: drop enum dpu_core_perf_data_bus_idDmitry Baryshkov
Drop the leftover of bus-client -> interconnect conversion, the enum dpu_core_perf_data_bus_id. Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/546048/ Link: https://lore.kernel.org/r/20230707193942.3806526-2-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-07-13drm/msm/dpu: add missing flush and fetch bits for DMA4/DMA5 planesJonathan Marek
Note that with this, DMA4/DMA5 are still non-functional, but at least display *something* in modetest instead of nothing or underflow. Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Patchwork: https://patchwork.freedesktop.org/patch/545548/ Link: https://lore.kernel.org/r/20230704160106.26055-1-jonathan@marek.ca Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-07-13drm/msm/mdss: correct UBWC programming for SM8550Dmitry Baryshkov
The SM8550 platform employs newer UBWC decoder, which requires slightly different programming. Fixes: a2f33995c19d ("drm/msm: mdss: add support for SM8550") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/546934/ Link: https://lore.kernel.org/r/20230712121145.1994830-3-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2023-07-11drm/msm/dpu: drop empty features mask INTF_SDM845_MASKDmitry Baryshkov
The INTF_SDM845_MASK features mask is zero. Drop it completely. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/545386/ Link: https://lore.kernel.org/r/20230704022136.130522-20-dmitry.baryshkov@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 10:12:51 +0000