summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm
AgeCommit message (Collapse)Author
2019-04-19drm/msm/a6xx: Remove an unused struct memberJordan Crouse
The HFI tasklet was removed in df0dff1 ("drm/msm/a6xx: Poll for HFI responses") but the tasklet_struct was accidentally left behind. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-19msm/drm/a6xx: Turn off the GMU if resume failsJordan Crouse
Currently if the GMU resume function fails all we try to do is clear the BOOT_SLUMBER oob which usually times out and ends up in a cycle of death. If the resume function fails at any point remove any RPMh votes that might have been added and try to shut down the GMU hardware cleanly. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-19drm/msm/a6xx: Make GMU reset usefulJordan Crouse
Now that the GX domain is sorted we can wire up a working GMU reset. IF a GMU hang was detected then try to forcefully shut down the GMU in the power down sequence which should ensure that it can recover normally on the next power up. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-19drm/msm/gpu: Attach to the GPU GX power domainJordan Crouse
99.999% of the time during normal operation the GMU is responsible for power and clock control on the GX domain and the CPU remains blissfully unaware. However, there is one situation where the CPU needs to get involved: The power sequencing rules dictate that the GX needs to be turned off before the CX so that the CX can be turned on before the GX during power up. During normal operation when the CPU is taking down the CX domain a stop command is sent to the GMU which turns off the GX domain and then the CPU handles the CX domain. But if the GMU happened to be unresponsive while the GX domain was left then the CPU will need to step in and turn off the GX domain before resetting the CX and rebooting the GMU. This unfortunately means that the CPU needs to be marginally aware of the GX domain even though it is expected to usually keep its hands off. To support this we create a semi-disabled GX power domain that does nothing to the hardware on power up but tries to shut it down normally on power down. In this method the reference counting is correct and we can step in with the pm_runtime_put() at the right time during the failure path. This patch sets up the connection to the GX power domain and does the magic to "enable" and disable it at the right points. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-19drm/msm/a6xx: Remove unwanted regulator codeJordan Crouse
The GMU code currently has some misguided code to try to work around a hardware quirk that requires the power domains on the GPU be collapsed in a certain order. Upcoming patches will do this the right way so get rid of the unused and unwanted regulator code. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-19drm/msm/gpu: Add submit queue queriesJordan Crouse
Add the capability to query information from a submit queue. The first available parameter is for querying the number of GPU faults (hangs) that can be attributed to the queue. This is useful for implementing context robustness. A user context can regularly query the number of faults to see if it is responsible for any and if so it can invalidate itself. This is also helpful for testing by confirming to the user driver if a particular command stream caused a fault (or not as the case may be). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-19drm/msm: add param to retrieve # of GPU faults (global)Rob Clark
For KHR_robustness, userspace wants to know two things, the count of GPU faults globally, and the count of faults attributed to a given context. This patch providees the former, and the next patch provides the latter. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
2019-04-19drm/msm/gpu: add per-process pagetables paramRob Clark
For now it always returns '0' (false), but once the iommu work is in place to enable per-process pagetables we can update the value returned. Userspace needs to know this to make an informed decision about exposing KHR_robustness. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
2019-04-18drm/msm: a5xx: fix possible object reference leakWen Yang
The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sharat Masetty <smasetty@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: Cleanup A6XX opp-level readingDouglas Anderson
The patch ("OPP: Add support for parsing the 'opp-level' property") adds an API enabling a cleaner way to read the opp-level. Let's use the new API. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm/dpu: check split role for single flushJeykumar Sankaran
Removing unwanted access of crtc_state for finding this information. Use split role information to know whether we have slave ctl. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-8-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm/dpu: assign intf to encoder in mode_setJeykumar Sankaran
Iterate and assign HW intf block to physical encoders in encoder modeset. Moving all the HW block assignments to encoder modeset to allow easy switching to state based resource management. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-7-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm/dpu: map mixer/ctl hw blocks in encoder modesetJeykumar Sankaran
After resource allocation, iterate and populate mixer/ctl hw blocks in encoder modeset thereby centralizing all the resource mapping to the CRTC. This change is made for easy switching to state based allocation using private objects later in this series. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-6-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm/dpu: dont use encoder->crtc in atomic pathJeykumar Sankaran
encoder->crtc is not really meaningful for atomic path. Use crtc->encoder_mask to identify the crtc attached with an encoder. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-5-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm/dpu: release resources on modeset failureJeykumar Sankaran
release resources allocated in mode_set if any of the hw check fails. Most of these checks are not necessary and they will be removed in the follow up patches with state based resource allocations. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-4-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm/dpu: remove phys_vid subclassJeykumar Sankaran
Not holding any video encoder specific data. Get rid of it. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-3-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm/dpu: move hw_inf encoder baseclassJeykumar Sankaran
Both video and command physical encoders will have a hw interface assigned to it. So there is really no need to track the hw block in specific encoder subclass. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-2-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: dpu: Don't set frame_busy_mask for async updatesSean Paul
The frame_busy mask is used in frame_done event handling, which is not invoked for async commits. So an async commit will leave the frame_busy mask populated after it completes and future commits will start with the busy mask incorrect. This showed up on disable after cursor move. I was hitting the "this should not happen" comment in the frame event worker since frame_busy was set, we queued the event, but there were no frames pending (since async also doesn't set that). Reviewed-by: Fritz Koenig <frkoenig@google.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190130163220.138637-1-sean@poorly.run Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: dpu: Don't queue the frame_done watchdog for cursorSean Paul
In the case of an async/cursor update, we don't wait for the frame_done event, which means handle_frame_done is never called, and the frame_done watchdog isn't canceled. Currently, this results in a frame_done timeout every time the cursor moves without a synchronous frame following it up before the timeout expires. Since we don't wait for frame_done, and don't handle it, we shouldn't modify the watchdog. Reviewed-by: Fritz Koenig <frkoenig@google.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-4-sean@poorly.run Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: dpu: Untangle frame_done timeout unitsSean Paul
There exists a bunch of confusion as to what the actual units of frame_done is: - The definition states it's in # of frames - CRTC treats it like it's ms - frame_done_timeout comment thinks it's Hz, but it stores ms - frame_done timer is setup such that it _should_ be in frames, but the timeout is super long So this patch tries to interpret what the driver really wants. I've de-centralized the #define since the consumers are expecting different units. For crtc, we just use 60ms since that's what it was doing before. Perhaps we could get fancy and scale with vrefresh, but that's for another time. For encoder, fix the comments and rename frame_done_timeout so it's obvious what the units are. In practice, frame_done_timeout is really just checked against 0 || !0, which I guess is why the units being wrong didn't matter. I've also dropped the timeout from the previous 60 frames to 5. That seems like more than enough time to give up on a frame, and my guess is that no one intended for the timeout to _actually_ be 60 frames. Reviewed-by: Fritz Koenig <frkoenig@google.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-3-sean@poorly.run Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: dpu: Simplify frame_done watchdog timeout calculationSean Paul
Instead of setting the timeout and then immediately reading it back (along with the hand-rolled msecs_to_jiffies calculation), just calculate it once and set it in both places at the same time. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-2-sean@poorly.run Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: Use drm_mode_vrefresh instead of mode->vrefreshSean Paul
Use the drm_mode_vrefresh helper where we need refresh rate in case vrefresh is empty. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190128204306.95076-1-sean@poorly.run Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: Fix NULL pointer dereferenceLuca Weiss
[ 3.707412] Unable to handle kernel NULL pointer dereference at virtual address 0000009c [ 3.714511] pgd = (ptrval) [ 3.722742] [0000009c] *pgd=00000000 [ 3.725238] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 3.728968] Modules linked in: [ 3.734265] CPU: 3 PID: 112 Comm: kworker/3:2 Tainted: G W 5.0.0-rc7-00183-g06a1c31df9eb #4 [ 3.737142] Hardware name: Generic DT based system [ 3.746778] Workqueue: events deferred_probe_work_func [ 3.751542] PC is at msm_gem_map_vma+0x3c/0xac [ 3.756669] LR is at msm_gem_get_and_pin_iova+0xd8/0x134 [ 3.761086] pc : [<c07d3b7c>] lr : [<c07d14f8>] psr: 60000013 [ 3.766560] sp : ee297be8 ip : ed9ab1c0 fp : ed93b800 [ 3.772546] r10: ee35e180 r9 : 00000000 r8 : ee297c80 [ 3.777752] r7 : 00000000 r6 : 7c100000 r5 : 00000000 r4 : ee35e180 [ 3.782968] r3 : 00000001 r2 : 00000003 r1 : ee35e180 r0 : 00000000 [ 3.789562] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.796079] Control: 10c5787d Table: 2e3a806a DAC: 00000051 [ 3.803282] Process kworker/3:2 (pid: 112, stack limit = 0x(ptrval)) [ 3.809006] Stack: (0xee297be8 to 0xee298000) [ 3.815445] 7be0: 00000000 c1108c48 eda8c000 00000003 eda8c0fc c1108c48 [ 3.819715] 7c00: eda8c000 00000003 eda8c0fc c07d14f8 00000001 c07d1100 7c100000 00000000 [ 3.827873] 7c20: eda8c000 bb7ffb78 00000000 eda8c000 00000000 00000000 c0c8b1d4 ee3bfa00 [ 3.836037] 7c40: ee3b9800 c07d1684 00000000 c1108c48 ee0d7810 ee3b9800 c0c8b1d4 c07d222c [ 3.844193] 7c60: ee3bfd84 ee297c80 00000000 c0b1d5b0 ee3bfc40 c07dcfd8 ee3bfd84 ee297c80 [ 3.852357] 7c80: 0000006d ee3bfc40 ee0d7810 bb7ffb78 c0c8b1d4 00000000 ee3bfc40 c07ddb48 [ 3.860516] 7ca0: 00002004 c0eba384 ee3bfc40 c079eba0 ee3bd040 ee3b9800 00000001 ed93b800 [ 3.868673] 7cc0: ed9aa100 c07db7e8 ee3bf240 ed9a6500 00000001 ee3b9800 ee3bf2d4 c07a0a30 [ 3.876834] 7ce0: ed93b800 7d100000 c1108c48 ee0d7610 ee3b9800 ed93b800 c1108c48 00000000 [ 3.884991] 7d00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.893151] 7d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bb7ffb78 [ 3.901310] 7d40: c12113c4 ed93b800 ee3b9800 c1108c48 ee9eec10 00000000 ed93b800 7d100000 [ 3.909472] 7d60: eff7b000 c07cf748 7d100000 00000000 c0e9a350 c0b1d5b0 c12113c4 c0961e40 [ 3.917633] 7d80: c12113c4 40000113 eeff4bec c0ebe004 00000019 c0b1d230 ee9eeda8 60000113 [ 3.925791] 7da0: ee35d300 ee9eeda8 c07ce260 bb7ffb78 c07ce260 ee35d2c0 00000028 00000002 [ 3.933950] 7dc0: eeb76280 c118f884 ee0be640 c11c6128 c07ce260 c07ea4ac 00000000 c0962b48 [ 3.942108] 7de0: c118f868 00000001 c0ebbc98 ee35d2c0 00000000 eeb76280 00000000 c118f87c [ 3.950270] 7e00: ee35d2c0 00000000 c11c63e0 c118f694 00000019 c07ea5d0 ee0d7810 00000000 [ 3.958430] 7e20: c118f694 00000000 00000000 c07f2b0c c120f55c ee0d7810 c120f560 00000000 [ 3.966590] 7e40: 00000000 c07f08c4 c07f0e8c ee0d7810 c11ba3d0 ee0d7810 c118f694 c07f0e8c [ 3.974748] 7e60: c1108c48 00000001 c0ebc3cc c11c63f8 c11ba3d0 c07f0c08 00000001 c07f2f8c [ 3.982908] 7e80: c118f694 00000000 ee297ed4 c07f0e8c c1108c48 00000001 c0ebc3cc c11c63f8 [ 3.991068] 7ea0: c11ba3d0 c07ee8a0 c11ba3d0 ee82686c ee0baf38 bb7ffb78 ee0d7810 ee0d7810 [ 3.999227] 7ec0: c1108c48 ee0d7844 c118faac c07f05b0 ee0d7810 ee0d7810 00000001 bb7ffb78 [ 4.007389] 7ee0: ee0d7810 ee0d7810 c118fd18 c118faac c11c63e0 c07ef7d0 ee0d7810 c118fa90 [ 4.015548] 7f00: c118fa90 c07efd68 c118fac8 ee27fe00 eefd9c80 eefdcd00 00000000 c118facc [ 4.023708] 7f20: 00000000 c033c038 eefd9c80 eefd9c80 00000008 ee27fe00 ee27fe14 eefd9c80 [ 4.031866] 7f40: 00000008 c1103d00 eefd9c98 ee296000 eefd9c80 c033ce54 ee907eac c0b1d230 [ 4.040026] 7f60: ee907eac eea24440 ee285000 00000000 ee296000 ee27fe00 c033ce24 eea2445c [ 4.048188] 7f80: ee907eac c0341db0 00000000 ee285000 c0341c8c 00000000 00000000 00000000 [ 4.056346] 7fa0: 00000000 00000000 00000000 c03010e8 00000000 00000000 00000000 00000000 [ 4.064505] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.072665] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.080828] [<c07d3b7c>] (msm_gem_map_vma) from [<c07d14f8>] (msm_gem_get_and_pin_iova+0xd8/0x134) [ 4.088983] [<c07d14f8>] (msm_gem_get_and_pin_iova) from [<c07d1684>] (_msm_gem_kernel_new+0x38/0xac) [ 4.097839] [<c07d1684>] (_msm_gem_kernel_new) from [<c07d222c>] (msm_gem_kernel_new+0x24/0x2c) [ 4.107130] [<c07d222c>] (msm_gem_kernel_new) from [<c07dcfd8>] (dsi_tx_buf_alloc_6g+0x44/0x90) [ 4.115631] [<c07dcfd8>] (dsi_tx_buf_alloc_6g) from [<c07ddb48>] (msm_dsi_host_modeset_init+0x80/0x104) [ 4.124313] [<c07ddb48>] (msm_dsi_host_modeset_init) from [<c07db7e8>] (msm_dsi_modeset_init+0x34/0x1c0) [ 4.133691] [<c07db7e8>] (msm_dsi_modeset_init) from [<c07a0a30>] (mdp5_kms_init+0x764/0x7e0) [ 4.143409] [<c07a0a30>] (mdp5_kms_init) from [<c07cf748>] (msm_drm_bind+0x56c/0x740) [ 4.151824] [<c07cf748>] (msm_drm_bind) from [<c07ea4ac>] (try_to_bring_up_master+0x238/0x2b4) [ 4.159636] [<c07ea4ac>] (try_to_bring_up_master) from [<c07ea5d0>] (component_add+0xa8/0x170) [ 4.168146] [<c07ea5d0>] (component_add) from [<c07f2b0c>] (platform_drv_probe+0x48/0x9c) [ 4.176737] [<c07f2b0c>] (platform_drv_probe) from [<c07f08c4>] (really_probe+0x278/0x404) [ 4.184981] [<c07f08c4>] (really_probe) from [<c07f0c08>] (driver_probe_device+0x78/0x1c0) [ 4.193147] [<c07f0c08>] (driver_probe_device) from [<c07ee8a0>] (bus_for_each_drv+0x74/0xb8) [ 4.201389] [<c07ee8a0>] (bus_for_each_drv) from [<c07f05b0>] (__device_attach+0xd0/0x164) [ 4.209984] [<c07f05b0>] (__device_attach) from [<c07ef7d0>] (bus_probe_device+0x84/0x8c) [ 4.218143] [<c07ef7d0>] (bus_probe_device) from [<c07efd68>] (deferred_probe_work_func+0x48/0xc4) [ 4.226398] [<c07efd68>] (deferred_probe_work_func) from [<c033c038>] (process_one_work+0x204/0x574) [ 4.235254] [<c033c038>] (process_one_work) from [<c033ce54>] (worker_thread+0x30/0x560) [ 4.244534] [<c033ce54>] (worker_thread) from [<c0341db0>] (kthread+0x124/0x154) [ 4.252606] [<c0341db0>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c) [ 4.259966] Exception stack(0xee297fb0 to 0xee297ff8) [ 4.266998] 7fa0: 00000000 00000000 00000000 00000000 [ 4.272143] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.280297] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.288451] Code: e5813080 1a000013 e3a03001 e5c4307c (e590009c) [ 4.294933] ---[ end trace 18729cc2bca2b4b3 ]--- Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: Remove pm_runtime calls from msm_iommu.cJordan Crouse
Currently the IOMMU code calls pm_runtime_get/put on the GPU or display device before doing a IOMMU operation. This was because usually the IOMMU driver didn't do power control of its own and since the hardware used the same clocks and power as the respective multimedia device it was a easy way to make sure that the power was available. Now two things have changed. First, the SMMU devices can do their own power control and more important bringing up the a6xx GPU isn't as easy as turning on some clocks. To bring the GPU up we need the GMU which itself needs the IOMMU so we have a chicken and egg problem. Luckily this is easily fixed by removing the pm_runtime calls from the functions and letting the device link to the IOMMU device handle the magic. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: don't allocate pages from the MOVABLE zoneLucas Stach
The pages backing the GEM objects are kept pinned in place as long as they are alive, so they must not be allocated from the MOVABLE zone. Blocking page migration for too long will cause the VM subsystem headaches and will outright break CMA, as a few pinned pages in CMA will lead to failure to find the required large contiguous regions. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-03-29Merge tag 'drm-misc-next-2019-03-28-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.2: UAPI Changes: - Remove unused DRM_DISPLAY_INFO_LEN (Ville) Cross-subsystem Changes: - None Core Changes: - Fix compilation when CONFIG_FBDEV not selected (Daniel) - fbdev: Make skip_vt_switch default (Daniel) - Merge fb_helper_fill_fix, fb_helper_fill_var into fb_helper_fill_info (Daniel) - Remove unused fields in connector, display_info, and edid_quirks (Ville) Driver Changes: - virtio: package function args in virtio_gpu_object_params (Gerd) - vkms: Fix potential NULL-dereference bug (Kangjie) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190328183045.GA44823@art_vandelay
2019-03-27drm/msm: Use drm_fb_helper_fill_infoDaniel Vetter
This will change the fb name from "msm" to "msmdrmfb". v2: Rebase v3: Fix subject prefix (Noralf) Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20190326132008.11781-13-daniel.vetter@ffwll.ch
2019-03-25Merge tag 'drm-misc-next-2019-03-21' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.2: UAPI Changes: - Add Colorspace connector property (Uma) - fourcc: Several new YUV formats from ARM (Brian & Ayan) - fourcc: Fix merge conflicts between new formats above and Swati's that went in via topic/hdr-formats-2019-03-07 branch (Maarten) Cross-subsystem Changes: - Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel) Core Changes: - Improve component helper documentation (Daniel) - Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf) - Add device managed (devm) drm_device init function (Noralf) - Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf) - Move MIPI/DSI rate control params computation into core from i915 (David) - Add support for shmem backed gem objects (Noralf) Driver Changes: - various: Use of_node_name_eq for node name comparisons (Rob Herring) - sun4i: Add DSI burst mode support (Konstantin) - panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin) - virtio: A few prime improvements (Gerd) - tinydrm: Remove tinydrm_device (Noralf) - vc4: Add load tracker to driver to detect underflow in atomic check (Boris) - vboxvideo: Move it out of staging \o/ (Hans) - v3d: Add support for V3D v4.2 (Eric) Cc: Konstantin Sudakov <k.sudakov@integrasources.com> Cc: Rob Herring <robh@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Francis <David.Francis@amd.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Ayan Kumar Halder <ayan.halder@arm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
2019-03-08Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for the 5.1 merge window. The big changes I'd highlight are: - nouveau has HMM support now, there is finally an in-tree user so we can quieten down the rip it out people. - i915 now enables fastboot by default on Skylake+ - Displayport Multistream support has been refactored and should hopefully be more reliable. Core: - header cleanups aiming towards removing drmP.h - dma-buf fence seqnos to 64-bits - common helper for DP mst hotplug for radeon,i915,amdgpu + new refcounting scheme - MST i2c improvements - drm_syncobj_cb removal - ARM FB compression fourcc - P010 + P016 fourcc - allwinner tiled format modifier - i2c over aux I2C_M_STOP support - DRM_AUTH handling fixes TTM: - ref/unref renaming New driver: - ARM komeda display driver scheduler: - refactor mirror list handling - rework hw fence processing - 0 run queue entity fix bridge: - TI DS90C185 LVDS bridge - thc631lvdm83d bridge improvements - cadence + allwinner DSI ported to generic phy panels: - Sitronix ST7701 panel - Kingdisplay KD097D04 - LeMaker BL035-RGB-002 - PDA 91-00156-A0 - Innolux EE101IA-01D i915: - Enable fastboot by default on SKL+/VLV/CHV - Export RPCS configuration for ICL media driver - Coffelake PCI ID - CNL clocks setup fixes - ACPI/PMIC support for MIPI/DSI - Per-engine WA init for all engines - Shrinker locking fixes - Kerneldoc updates - Lots of ring improvements and reset fixes - Coffeelake GVT Support - VFIO GVT EDID Region support - runtime PM wakeref tracking - ILK->IVB primary plane enable delays - userptr mutex locking fixes - DSI fixes - LVDS/TV cleanups - HW readout fixes - LUT robustness fixes - ICL display and watermark fixes - gem mmap race fix amdgpu: - add scheduled dependencies interface - DCC on scanout surfaces - vega10/20 BACO support - Multiple IH rings on soc15 - XGMI locking fixes - DC i2c/aux cleanups - runtime SMU debug interface - Kexec improvmeents - SR-IOV fixes - DC freesync + ABM fixes - GDS fixes - GPUVM fixes - vega20 PCIE DPM switching fixes - Context priority handling fixes radeon: - fix missing break in evergreen parser nouveau: - SVM support via HMM msm: - QCOM Compressed modifier support exynos: - s5pv210 rotator support imx: - zpos property support - pending update fixes v3d: - cache flush improvments vc4: - reflection support - HDMI overscan support tegra: - CEC refactoring - HDMI audio fixes - Tegra186 prep work - SOR crossbar device tree fixes sun4i: - implicit fencing support - YUV and scalar support improvements - A23 support - tiling fixes atmel-hlcdc: - clipping and rotation property fixes qxl: - BO and PRIME improvements - generic fbdev emulation dw-hdmi: - HDMI 2.0 2160p - YUV420 ouput rockchip: - implicit fencing support - reflection proerties virtio-gpu: - use generic fbdev emulation tilcdc: - cpufreq vs crtc init fix rcar-du: - R8A774C0 support - D3/E3 RGB output routing fixes and DPAD0 support - RA87744 LVDS support bochs: - atomic and generic fbdev emulation - ID mismatch error on bochs load meson: - remove firmware fbs" * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits) drm/amd/display: Use vrr friendly pageflip throttling in DC. drm/imx: only send commit done event when all state has been applied drm/imx: allow building under COMPILE_TEST drm/imx: imx-tve: depend on COMMON_CLK drm/imx: ipuv3-plane: add zpos property drm/imx: ipuv3-plane: add function to query atomic update status gpu: ipu-v3: prg: add function to get channel configure status gpu: ipu-v3: pre: add double buffer status readback drm/amdgpu: Bump amdgpu version for context priority override. drm/amdgpu/powerplay: fix typo in BACO header guards drm/amdgpu/powerplay: fix return codes in BACO code drm/amdgpu: add missing license on baco files drm/bochs: Fix the ID mismatch error drm/nouveau/dmem: use dma addresses during migration copies drm/nouveau/dmem: use physical vram addresses during migration copies drm/nouveau/dmem: extend copy function to allow direct use of physical addresses drm/nouveau/svm: new ioctl to migrate process memory to GPU memory drm/nouveau/dmem: device memory helpers for SVM drm/nouveau/svm: initial support for shared virtual memory drm/nouveau: prepare for enabling svm with existing userspace interfaces ...
2019-03-06Merge drm/drm-next into drm-misc-nextSean Paul
Picking up v5.0 + missed misc-fixes from last release Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-20Merge https://gitlab.freedesktop.org/drm/msm into drm-nextDave Airlie
On the display side, cleanups and fixes to enabled modifiers (QCOM_COMPRESSED). And otherwise mostly misc fixes all around. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuZ5uBKpf=fHvKpTiD10nychuEY8rnE+HeRz0QMvtY5_A@mail.gmail.com
2019-02-19drm/msm: Truncate the buffer object name if the copy from user failedJordan Crouse
(Resend since there was a compile error that I forgot to commit before sending) If there is a error while doing a copy_from_user() for MSM_INFO_SET_NAME make sure to truncate the object name so that there isn't a chance that we'll have random data in the string. This is on top of [1] reported and fixed by Dan Carpenter. [1] https://patchwork.freedesktop.org/series/56656/ Fixes: f05c83e77460 ("drm/msm: add uapi to get/set debug name") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2019-02-19drm/msm: fix an error code in the ioctlDan Carpenter
The copy_to/from_user() functions return the number of bytes remaining to be copied but we should return -EFAULT to the user. Fixes: f05c83e77460 ("drm/msm: add uapi to get/set debug name") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2019-02-19drm/msm/a6xx: Add support for an interconnect pathJordan Crouse
Try to get the interconnect path for the GPU and vote for the maximum bandwidth to support all frequencies. This is needed for performance. Later we will want to scale the bandwidth based on the frequency to also optimize for power but that will require some device tree infrastructure that does not yet exist. v6: use icc_set_bw() instead of icc_set() v5: Remove hardcoded interconnect name and just use the default v4: Don't use a port string at all to skip the need for names in the DT v3: Use macros and change port string per Georgi Djakov Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19Merge drm/drm-next into drm-misc-nextMaxime Ripard
Backmerge drm-next to bring in -rc7 Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-02-19drm: msm: Switch to use drm_gem_object reservation_objectRob Herring
Now that the base struct drm_gem_object has a reservation_object, use it and remove the private BO one. We can't use the drm_gem_reservation_object_wait() helper for MSM because (in theory) msm_gem_cpu_prep() will also do some cache maintenance on the GEM object. Cc: David Airlie <airlied@linux.ie> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190202154158.10443-4-robh@kernel.org Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-02-18Merge v5.0-rc7 into drm-nextDave Airlie
Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-05drm/msm/dpu: remove struct encoder_kickoff_paramsBruce Wang
The contents of struct encoder_kickoff_params are never used. Remove the structure and all remnants of it from function calls. Changes in v2 (seanpaul): - Actually remove the struct (Jeykumar) Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Bruce Wang <bzwang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm: subclass work object for vblank eventsJeykumar Sankaran
msm maintains a separate structure to define vblank work definitions and a list to track events submitted to the workqueue. We can avoid this redundant list and its protection mechanism, if we subclass the work object to encapsulate vblank event parameters. changes in v2: - subclass optimization on system wq (Sean Paul) changes in v3: - none changes in v4: - move flush_workqueue before irq uninstall changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm: clean up display threadJeykumar Sankaran
Since there are no clients using these threads, cleaning it up. changes in v2: - switch all the dependent clients to use system wq before removing the disp_threads (Sean Paul) changes in v3: - none changes in v4: - none changes in v5: - Rebase on latest tip with [1] (Sean Paul) [1] https://patchwork.freedesktop.org/patch/255105/ Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: use msm wq for idle power collapseJeykumar Sankaran
msm is using msm wq for dispatching commit and vblank events. Switch idle power collapse feature also to use msm wq to handle delayed work handlers so that msm can get rid of redundant display threads. changes in v2: - patch introduced in v2 changes in v3: - none changes in v4: - use msm wq for delayed works changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: use msm wq for vblank eventsJeykumar Sankaran
DPU was using one thread per display to dispatch async commits and vblank requests. Since clean up already happened in msm to use the common thread for all the display commits, display threads are only used to cater vblank requests. Since a single thread is sufficient to do the job without any performance hits, use msm workqueue to queue requests. A separate patch is submitted later in this series to remove the display threads altogether. changes in v2: - switch to system wq before removing disp threads (Sean Paul) changes in v3: - none changes in v4: - use msm wq for vblank events changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: use kthread_destroy_worker to release msm workersJeykumar Sankaran
use kthread_destroy_worker to destroy workers and release their associated kthreads. changes in v3: - introduced in the series changes in v4: - none changes in v5: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: Change definition of RGB565 and BGR565Tanmay Shah
Correct definition of both formats by swapping red and blue channels v3: update commit message Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: Clean up dpu hw interruptsJayant Shekhar
Remove unused functions and macros from files handling dpu hardware interrupts. changes in v2: Removed clear_interrupt_status (Jordan Crouse) changes in v3: Changed commit text Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: Cleanup dpu plane interfaceJayant Shekhar
Remove unused functions from dpu plane interface and unused variables from dpu plane state structure. Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: Remove unused enum and comment from dpu mdssJayant Shekhar
Remove enum dpu_iommu_domain from dpu mdss as its unused. Remove unnecessary comment for variable which is already removed. Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: handle failures while initializing displaysJeykumar Sankaran
Bail out KMS hw init on display initialization failures with proper error logging. changes in v3: - introduced in the series changes in v4: - avoid duplicate return on errors (Sean Paul) - avoid spamming errors on failures (Jordon Crouse) Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: fix documentation for intf_typeJeykumar Sankaran
Fix intf_type description in msm_disp_info to show that it represents drm encoder mode of the display. changes in v3: - introduced in the series changes in v4: - none Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-02-01drm/msm/dpu: Convert to a chained irq chipStephen Boyd
Devices that make up DPU, i.e. graphics card, request their interrupts from this "virtual" interrupt chip. The interrupt chip builds upon a GIC SPI interrupt that raises high when any of the interrupts in the DPU's irq status register are triggered. From the kernel's perspective this is a chained irq chip, so requesting a flow handler for the GIC SPI and then calling generic IRQ handling code from that irq handler is not completely proper. It's better to convert this to a chained irq so that the GIC SPI irq doesn't appear in /proc/interrupts, can't have CPU affinity changed, and won't be accounted for with irq stats. Doing this also silences a recursive lockdep warning because we can specify a different lock class for the chained interrupts, silencing a warning that is easy to see with 'threadirqs' on the kernel commandline. WARNING: inconsistent lock state 4.19.10 #76 Tainted: G W -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. irq/40-dpu_mdss/203 [HC0[0]:SC0[2]:HE1:SE0] takes: 0000000053ea9021 (&irq_desc_lock_class){?.-.}, at: handle_level_irq+0x34/0x26c {IN-HARDIRQ-W} state was registered at: lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_fasteoi_irq+0x54/0x2ec generic_handle_irq+0x44/0x5c __handle_domain_irq+0x9c/0x11c gic_handle_irq+0x208/0x260 el1_irq+0xb4/0x130 arch_cpu_idle+0x178/0x3cc default_idle_call+0x3c/0x54 do_idle+0x1a8/0x3dc cpu_startup_entry+0x24/0x28 rest_init+0x240/0x270 start_kernel+0x5a8/0x6bc irq event stamp: 18 hardirqs last enabled at (17): [<ffffff9042385e80>] _raw_spin_unlock_irq+0x40/0xc0 hardirqs last disabled at (16): [<ffffff904237a1f4>] __schedule+0x20c/0x1bbc softirqs last enabled at (0): [<ffffff9040f318d0>] copy_process+0xb50/0x3964 softirqs last disabled at (18): [<ffffff9041036364>] local_bh_disable+0x8/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** no locks held by irq/40-dpu_mdss/203. stack backtrace: CPU: 0 PID: 203 Comm: irq/40-dpu_mdss Tainted: G W 4.19.10 #76 Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xcc/0x10c mark_lock+0xbe0/0xe24 __lock_acquire+0x4cc/0x2708 lock_acquire+0x244/0x360 _raw_spin_lock+0x64/0xa0 handle_level_irq+0x34/0x26c generic_handle_irq+0x44/0x5c dpu_mdss_irq+0x64/0xec irq_forced_thread_fn+0x58/0x9c irq_thread+0x120/0x1dc kthread+0x248/0x260 ret_from_fork+0x10/0x18 ------------[ cut here ]------------ irq 169 handler irq_default_primary_handler+0x0/0x18 enabled interrupts Cc: Sean Paul <seanpaul@chromium.org> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jayant Shekhar <jshekhar@codeaurora.org> Cc: Rajesh Yadav <ryadav@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:17:09 +0000