summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/msm_drv.c
AgeCommit message (Collapse)Author
2021-06-23drm/msm: get rid of msm_iomap_sizeDmitry Baryshkov
Instead of looping throught the resources each time to get the DSI CTRL area size, get it at the ioremap time. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210427001828.2375555-4-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: add support to take dpu snapshotAbhinav Kumar
Add the msm_disp_snapshot module which adds supports to dump dpu registers and capture the drm atomic state which can be used in case of error conditions. changes in v5: - start storing disp_state in msm_kms instead of dpu_kms - get rid of MSM_DISP_SNAPSHOT_IN_* enum by simplifying the functions - move snprintf inside the snapshot core by using varargs - get rid of some stale code comments - allow snapshot module for non-DPU targets Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1618606645-19695-3-git-send-email-abhinavk@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-28drm/msm: fix minor version to indicate MSM_PARAM_SUSPENDS supportJonathan Marek
Increase the minor version to indicate that MSM_PARAM_SUSPENDS is supported. Fixes: 3ab1c5cc3939 ("drm/msm: Add param for userspace to query suspend count") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20210423190420.25217-1-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm/disp/dpu1: add support for display for SC7280 targetKrishna Manikandan
Add required display hw catalog changes for SC7280 target. Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Link: https://lore.kernel.org/r/1617685792-14376-2-git-send-email-mkrishn@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm: Track potentially evictable objectsRob Clark
Objects that are potential for swapping out are (1) willneed (ie. if they are purgable/MADV_WONTNEED we can just free the pages without them having to land in swap), (2) not on an active list, (3) not dma-buf imported or exported, and (4) not vmap'd. This repurposes the purged list for objects that do not have backing pages (either because they have not been pinned for the first time yet, or in a later patch because they have been unpinned/evicted. Signed-off-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20210405174532.1441497-7-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm: Add param for userspace to query suspend countRob Clark
Performance counts, and ALWAYS_ON counters used for capturing GPU timestamps, lose their state across suspend/resume cycles. Userspace tooling for performance monitoring needs to be aware of this. For example, after a suspend userspace needs to recalibrate it's offset between CPU and GPU time. Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Jordan Crouse <jordan@cosmicpenguin.net> Link: https://lore.kernel.org/r/20210325012358.1759770-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm: add compatibles for sm8150/sm8250 displayJonathan Marek
The driver already has support for sm8150/sm8250, but the compatibles were never added. Also inverse the non-mdp4 condition in add_display_components() to avoid having to check every new compatible in the condition. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210329120051.3401567-4-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm: Remove need for reiterating the compatiblesBjorn Andersson
After spending a non-negligible time trying to figure out why dpu_kms_init() would dereference a NULL dpu_kms->pdev, it turns out that in addition to adding the new compatible to the msm_drv of_match_table one also need to teach add_display_components() to register the child nodes - which includes the DPU platform_device. Replace the open coded test for compatibles with a check against the match data of the mdss device to save others this trouble in the future. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210317025634.3987908-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm: Fix debugfs deadlockRob Clark
In normal cases the gem obj lock is acquired first before mm_lock. The exception is iterating the various object lists. In the shrinker path, deadlock is avoided by using msm_gem_trylock() and skipping over objects that cannot be locked. But for debugfs the straightforward thing is to split things out into a separate list of all objects protected by it's own lock. Fixes: d984457b31c4 ("drm/msm: Add priv->mm_lock to protect active/inactive lists") Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210401012722.527712-4-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-07drm/msm: Avoid mutex in shrinker_count()Rob Clark
When the system is under heavy memory pressure, we can end up with lots of concurrent calls into the shrinker. Keeping a running tab on what we can shrink avoids grabbing a lock in shrinker->count(), and avoids shrinker->scan() getting called when not profitable. Also, we can keep purged objects in their own list to avoid re-traversing them to help cut down time in the critical section further. Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210401012722.527712-3-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-04-01drm/msm: Set drvdata to NULL when msm_drm_init() failsStephen Boyd
We should set the platform device's driver data to NULL here so that code doesn't assume the struct drm_device pointer is valid when it could have been destroyed. The lifetime of this pointer is managed by a kref but when msm_drm_init() fails we call drm_dev_put() on the pointer which will free the pointer's memory. This driver uses the component model, so there's sort of two "probes" in this file, one for the platform device i.e. msm_pdev_probe() and one for the component i.e. msm_drm_bind(). The msm_drm_bind() code is using the platform device's driver data to store struct drm_device so the two functions are intertwined. This relationship becomes a problem for msm_pdev_shutdown() when it tests the NULL-ness of the pointer to see if it should call drm_atomic_helper_shutdown(). The NULL test is a proxy check for if the pointer has been freed by kref_put(). If the drm_device has been destroyed, then we shouldn't call the shutdown helper, and we know that is the case if msm_drm_init() failed, therefore set the driver data to NULL so that this pointer liveness is tracked properly. Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Krishna Manikandan <mkrishn@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Message-Id: <20210325212822.3663144-1-swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-03-21drm/msm: Fix suspend/resume on i.MX5Fabio Estevam
When putting iMX5 into suspend, the following flow is observed: [ 70.023427] [<c07755f0>] (msm_atomic_commit_tail) from [<c06e7218>] (commit_tail+0x9c/0x18c) [ 70.031890] [<c06e7218>] (commit_tail) from [<c0e2920c>] (drm_atomic_helper_commit+0x1a0/0x1d4) [ 70.040627] [<c0e2920c>] (drm_atomic_helper_commit) from [<c06e74d4>] (drm_atomic_helper_disable_all+0x1c4/0x1d4) [ 70.050913] [<c06e74d4>] (drm_atomic_helper_disable_all) from [<c0e2943c>] (drm_atomic_helper_suspend+0xb8/0x170) [ 70.061198] [<c0e2943c>] (drm_atomic_helper_suspend) from [<c06e84bc>] (drm_mode_config_helper_suspend+0x24/0x58) In the i.MX5 case, priv->kms is not populated (as i.MX5 does not use any of the Qualcomm display controllers), causing a NULL pointer dereference in msm_atomic_commit_tail(): [ 24.268964] 8<--- cut here --- [ 24.274602] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 24.283434] pgd = (ptrval) [ 24.286387] [00000000] *pgd=ca212831 [ 24.290788] Internal error: Oops: 17 [#1] SMP ARM [ 24.295609] Modules linked in: [ 24.298777] CPU: 0 PID: 197 Comm: init Not tainted 5.11.0-rc2-next-20210111 #333 [ 24.306276] Hardware name: Freescale i.MX53 (Device Tree Support) [ 24.312442] PC is at msm_atomic_commit_tail+0x54/0xb9c [ 24.317743] LR is at commit_tail+0xa4/0x1b0 Fix the problem by calling drm_mode_config_helper_suspend/resume() only when priv->kms is available. Fixes: ca8199f13498 ("drm/msm/dpu: ensure device suspend happens during PM sleep") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-03-21drm/msm: fix shutdown hook in case GPU components failed to bindDmitry Baryshkov
If GPU components have failed to bind, shutdown callback would fail with the following backtrace. Add safeguard check to stop that oops from happening and allow the board to reboot. [ 66.617046] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 66.626066] Mem abort info: [ 66.628939] ESR = 0x96000006 [ 66.632088] EC = 0x25: DABT (current EL), IL = 32 bits [ 66.637542] SET = 0, FnV = 0 [ 66.640688] EA = 0, S1PTW = 0 [ 66.643924] Data abort info: [ 66.646889] ISV = 0, ISS = 0x00000006 [ 66.650832] CM = 0, WnR = 0 [ 66.653890] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107f81000 [ 66.660505] [0000000000000000] pgd=0000000100bb2003, p4d=0000000100bb2003, pud=0000000100897003, pmd=0000000000000000 [ 66.671398] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 66.677115] Modules linked in: [ 66.680261] CPU: 6 PID: 352 Comm: reboot Not tainted 5.11.0-rc2-00309-g79e3faa756b2 #38 [ 66.688473] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 66.695347] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 66.701507] pc : msm_atomic_commit_tail+0x78/0x4e0 [ 66.706437] lr : commit_tail+0xa4/0x184 [ 66.710381] sp : ffff8000108f3af0 [ 66.713791] x29: ffff8000108f3af0 x28: ffff418c44337000 [ 66.719242] x27: 0000000000000000 x26: ffff418c40a24490 [ 66.724693] x25: ffffd3a842a4f1a0 x24: 0000000000000008 [ 66.730146] x23: ffffd3a84313f030 x22: ffff418c444ce000 [ 66.735598] x21: ffff418c408a4980 x20: 0000000000000000 [ 66.741049] x19: 0000000000000000 x18: ffff800010710fbc [ 66.746500] x17: 000000000000000c x16: 0000000000000001 [ 66.751954] x15: 0000000000010008 x14: 0000000000000068 [ 66.757405] x13: 0000000000000001 x12: 0000000000000000 [ 66.762855] x11: 0000000000000001 x10: 00000000000009b0 [ 66.768306] x9 : ffffd3a843192000 x8 : ffff418c44337000 [ 66.773757] x7 : 0000000000000000 x6 : 00000000a401b34e [ 66.779210] x5 : 00ffffffffffffff x4 : 0000000000000000 [ 66.784660] x3 : 0000000000000000 x2 : ffff418c444ce000 [ 66.790111] x1 : ffffd3a841dce530 x0 : ffff418c444cf000 [ 66.795563] Call trace: [ 66.798075] msm_atomic_commit_tail+0x78/0x4e0 [ 66.802633] commit_tail+0xa4/0x184 [ 66.806217] drm_atomic_helper_commit+0x160/0x390 [ 66.811051] drm_atomic_commit+0x4c/0x60 [ 66.815082] drm_atomic_helper_disable_all+0x1f4/0x210 [ 66.820355] drm_atomic_helper_shutdown+0x80/0x130 [ 66.825276] msm_pdev_shutdown+0x14/0x20 [ 66.829303] platform_shutdown+0x28/0x40 [ 66.833330] device_shutdown+0x158/0x330 [ 66.837357] kernel_restart+0x40/0xa0 [ 66.841122] __do_sys_reboot+0x228/0x250 [ 66.845148] __arm64_sys_reboot+0x28/0x34 [ 66.849264] el0_svc_common.constprop.0+0x74/0x190 [ 66.854187] do_el0_svc+0x24/0x90 [ 66.857595] el0_svc+0x14/0x20 [ 66.860739] el0_sync_handler+0x1a4/0x1b0 [ 66.864858] el0_sync+0x174/0x180 [ 66.868269] Code: 1ac020a0 2a000273 eb02007f 54ffff01 (f9400285) [ 66.874525] ---[ end trace 20dedb2a3229fec8 ]--- Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-31drm/msm: Fix MSM_INFO_GET_IOVA with carveoutIskren Chernev
The msm_gem_get_iova should be guarded with gpu != NULL and not aspace != NULL, because aspace is NULL when using vram carveout. Fixes: 933415e24bd0d ("drm/msm: Add support for private address space instances") Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-01-08Merge tag 'drm-msm-fixes-2021-01-07' of ↵Daniel Vetter
https://gitlab.freedesktop.org/drm/msm into drm-fixes A few misc fixes from Rob, mostly fallout from the locking rework that landed in the merge window, plus a few smaller things. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtWMhzyD6kejmViZeZ+zfJxRvfq-R2t_zA+DcDiTxsYRQ@mail.gmail.com
2021-01-07drm/msm: Call msm_init_vram before binding the gpuCraig Tatlor
vram.size is needed when binding a gpu without an iommu and is defined in msm_init_vram(), so run that before binding it. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Tested-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-12-10Merge tag 'drm-msm-next-2020-12-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next * Shutdown hook for GPU (to ensure GPU is idle before iommu goes away) * GPU cooling device support * DSI 7nm and 10nm phy/pll updates * Additional sm8150/sm8250 DPU support (merge_3d and DSPP color processing) * Various DP fixes * A whole bunch of W=1 fixes from Lee Jones * GEM locking re-work (no more trylock_recursive in shrinker!) * LLCC (system cache) support * Various other fixes/cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGt0G=H3_RbF_GAQv838z5uujSmFd+7fYhL6Yg=23LwZ=g@mail.gmail.com
2020-11-29drm/msm: rearrange the gpu_rmw() functionSharat Masetty
The register read-modify-write construct is generic enough that it can be used by other subsystems as needed, create a more generic rmw() function and have the gpu_rmw() use this new function. Signed-off-by: Sharat Masetty <smasetty@codeaurora.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-29drm/msm/msm_drv: Make '_msm_ioremap()' staticLee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/msm/msm_drv.c:124:15: warning: no previous prototype for ‘_msm_ioremap’ [-Wmissing-prototypes] Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-21drm/msm/shrinker: Only iterate dontneed objsRob Clark
In situations where the GPU is mostly idle, all or nearly all buffer objects will be in the inactive list. But if the system is under memory pressure (from something other than GPU), we could still get a lot of shrinker calls. Which results in traversing a list of thousands of objs and in the end finding nothing to shrink. Which isn't so efficient. Instead split the inactive_list into two lists, one inactive objs which are shrinkable, and a second one for those that are not. This way we can avoid traversing objs which we know are not shrinker candidates. v2: Fix inverted logic think-o Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-06drm/<drivers>: Constify struct drm_driverDaniel Vetter
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-04drm/msm: Drop struct_mutex in madvise pathRob Clark
The obj->lock is sufficient for what we need. This *does* have the implication that userspace can try to shoot themselves in the foot by racing madvise(DONTNEED) with submit. But the result will be about the same if they did madvise(DONTNEED) before the submit ioctl, ie. they might not get want they want if they race with shrinker. But iova fault handling is robust enough, so userspace is only shooting it's own foot. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Remove msm_gem_free_workRob Clark
Now that we don't need struct_mutex in the free path, we can get rid of the asynchronous free altogether. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Add priv->mm_lock to protect active/inactive listsRob Clark
Rather than relying on the big dev->struct_mutex hammer, introduce a more specific lock for protecting the bo lists. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-02Merge drm/drm-next into drm-misc-nextMaxime Ripard
Daniel needs -rc2 in drm-misc-next to merge some patches Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-09-25drm/msm: Introduce GEM object funcsThomas Zimmermann
GEM object functions deprecate several similar callback interfaces in struct drm_driver. This patch replaces the per-driver callbacks with per-instance callbacks in msm. The only exception is gem_prime_mmap, which is non-trivial to convert. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200923102159.24084-10-tzimmermann@suse.de
2020-09-15drm/msm/dp: add displayPort driver supportChandan Uddaraju
Add the needed displayPort files to enable DP driver on msm target. "dp_display" module is the main module that calls into other sub-modules. "dp_drm" file represents the interface between DRM framework and DP driver. Changes in v12: -- Add support of pm ops in display port driver -- Clear bpp depth bits before writing to MISC register -- Fix edid read Previous Change log: https://lkml.kernel.org/lkml/20200818051137.21478-3-tanmay@codeaurora.org/ Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Vara Reddy <varar@codeaurora.org> Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Co-developed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Co-developed-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Co-developed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Guenter Roeck <groeck@chromium.org> Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-09-12drm/msm: Show process names in gem_describeRob Clark
In $debugfs/gem we already show any vma(s) associated with an object. Also show process names if the vma's address space is a per-process address space. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Add support for private address space instancesJordan Crouse
Add support for allocating private address space instances. Targets that support per-context pagetables should implement their own function to allocate private address spaces. The default will return a pointer to the global address space. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Add a context pointer to the submitqueueJordan Crouse
Each submitqueue is attached to a context. Add a pointer to the context to the submitqueue at create time and refcount it so that it stays around through the life of the queue. Co-developed-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Drop local dma_parmsRobin Murphy
Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices"), struct platform_device already provides a dma_parms structure, so we can save allocating another one. Also the DMA segment size is simply a size, not a bitmask. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-08-18drm/msm: add shutdown support for display platform_driverKrishna Manikandan
Define shutdown callback for display drm driver, so as to disable all the CRTCS when shutdown notification is received by the driver. This change will turn off the timing engine so that no display transactions are requested while mmu translations are getting disabled during reboot sequence. Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Changes in v2: - Remove NULL check from msm_pdev_shutdown (Stephen Boyd) - Change commit text to reflect when this issue was uncovered (Sai Prakash Ranjan) Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-07-31drm/msm: use kthread_create_worker instead of kthread_runBernard
Use kthread_create_worker to simplify the code and optimise the manager struct: msm_drm_thread. With this change, we could remove struct element (struct task_struct *thread & struct kthread_worker worker), instead, use one point (struct kthread_worker *worker). Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-07-31drm/msm: Quiet error during failure in optional resource mappings.Eric Anholt
We don't expect to find vbif_nrt or regdma on sdm845, but were clogging up dmesg with errors about it. Signed-off-by: Eric Anholt <eric@anholt.net> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-07-30drm/msm/dpu: ensure device suspend happens during PM sleepKalyan Thota
"The PM core always increments the runtime usage counter before calling the ->suspend() callback and decrements it after calling the ->resume() callback" DPU and DSI are managed as runtime devices. When suspend is triggered, PM core adds a refcount on all the devices and calls device suspend, since usage count is already incremented, runtime suspend was not getting called and it kept the clocks on which resulted in target not entering into XO shutdown. Add changes to force suspend on runtime devices during pm sleep. Changes in v1: - Remove unnecessary checks in the function _dpu_kms_disable_dpu (Rob Clark). Changes in v2: - Avoid using suspend_late to reset the usagecount as suspend_late might not be called during suspend call failures (Doug). Changes in v3: - Use force suspend instead of managing device usage_count via runtime put and get API's to trigger callbacks (Doug). Changes in v4: - Check the return values of pm_runtime_force_suspend and pm_runtime_force_resume API's and pass appropriately (Doug). Changes in v5: - With v4 patch, test cycle has uncovered issues in device resume. On bubs: cmd tx failures were seen as SW is sending panel off commands when the dsi resources are turned off. Upon suspend, DRM driver will issue a NULL composition to the dpu, followed by turning off all the HW blocks. v5 changes will serialize the NULL commit and resource unwinding by handling them under PM prepare and PM complete phases there by ensuring that clks are on when panel off commands are being processed. Changes in v6: - Use drm_mode_config_helper_suspend/resume() instead of legacy API drm_atomic_helper_suspend/resume() (Doug). Trigger runtime callbacks from the suspend/resume call to turn off the resources. Changes in v7: - Add "__maybe_unused" to the functions to avoid compilation failures. Cleanup unnecessary configs (Doug). Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
2020-06-15sched: Remove sched_set_*() return valuePeter Zijlstra
Ingo suggested that since the new sched_set_*() functions are implemented using the 'nocheck' variants, they really shouldn't ever fail, so remove the return value. Cc: axboe@kernel.dk Cc: daniel.lezcano@linaro.org Cc: sudeep.holla@arm.com Cc: airlied@redhat.com Cc: broonie@kernel.org Cc: paulmck@kernel.org Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org>
2020-06-15sched,msm: Convert to sched_set_fifo*()Peter Zijlstra
Because SCHED_FIFO is a broken scheduler model (see previous patches) take away the priority field, the kernel can't possibly make an informed decision. Use sched_set_fifo(); Effectively changes prio from 16 to 50. Cc: airlied@redhat.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org>
2020-05-19drm/msm: remove _unlocked suffix in drm_gem_object_put_unlockedEmil Velikov
Spelling out _unlocked for each and every driver is a annoying. Especially if we consider how many drivers, do not know (or need to) about the horror stories involving struct_mutex. Just drop the suffix. It makes the API cleaner. Done via the following script: __from=drm_gem_object_put_unlocked __to=drm_gem_object_put for __file in $(git grep --name-only $__from); do sed -i "s/$__from/$__to/g" $__file; done Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-25-emil.l.velikov@gmail.com
2020-05-19drm/gem: add _locked suffix to drm_gem_object_putEmil Velikov
Vast majority of DRM (core and drivers) are struct_mutex free. As such we have only a handful of cases where the locked helper should be used. Make that stand out a little bit better. Done via the following script: __from=drm_gem_object_put __to=drm_gem_object_put_locked for __file in $(git grep --name-only --word-regexp $__from); do sed -i "s/\<$__from\>/$__to/g" $__file; done Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200515095118.2743122-12-emil.l.velikov@gmail.com
2020-05-18drm/msm: Add syncobj support.Bas Nieuwenhuizen
This 1) Enables core DRM syncobj support. 2) Adds options to the submission ioctl to wait/signal syncobjs. Just like the wait fence fd, this does inline waits. Using the scheduler would be nice but I believe it is out of scope for this work. Support for timeline syncobjs is implemented and the interface is ready for it, but I'm not enabling it yet until there is some code for turnip to use it. The reset is mostly in there because in the presence of waiting and signalling the same semaphores, resetting them after signalling can become very annoying. v2: - Fixed style issues - Removed a cleanup issue in a failure case - Moved to a copy_from_user per syncobj v3: - Fixed a missing declaration introduced in v2 - Reworked to use ERR_PTR/PTR_ERR - Simplified failure gotos. Used by: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2769 Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-03-31Merge tag 'drm-msm-next-2020-03-22' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next A bit smaller this time around.. there are still a couple uabi additions for vulkan waiting in the wings, but I punted on them this cycle due to running low on time. (They should be easy enough to rebase, and if it is a problem for anyone I can push a next+uabi branch so that tu work can proceed.) The bigger change is refactoring dpu resource manager and moving dpu to use atomic global state. Other than that, it is mostly cleanups and fixes. From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGuf1R4Xz-t9Z7_cwx9jD=b4wUvvwfqA5cHR8fCSXSd5XQ@mail.gmail.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-03-19drm/msm: fix leaks if initialization failsPavel Machek
We should free resources in unlikely case of allocation failure. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-02-17Merge v5.6-rc2 into drm-misc-nextMaxime Ripard
Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next forward yet, so it looks like a good occasion. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-02-14Merge tag 'drm-misc-next-fixes-2020-02-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-next fixes for v5.6: - Fix build error in drm/edid. - Plug close-after-free race in vgem_gem_create. - Handle CONFIG_DMA_API_DEBUG_SG better in drm/msm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/551b6183-a581-9d12-10a9-24cd929de425@linux.intel.com
2020-02-13drm/msm: Convert to CRTC VBLANK callbacksThomas Zimmermann
VBLANK callbacks in struct drm_driver are deprecated in favor of their equivalents in struct drm_crtc_funcs. Convert msm over. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Yannick Fertré <yannick.fertre@st.com> Acked-by: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200123135943.24140-14-tzimmermann@suse.de
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-22drm/msm: Set dma maximum segment size for mdssSean Paul
Turning on CONFIG_DMA_API_DEBUG_SG results in the following error: [ 12.078665] msm ae00000.mdss: DMA-API: mapping sg segment longer than device claims to support [len=3526656] [max=65536] [ 12.089870] WARNING: CPU: 6 PID: 334 at /mnt/host/source/src/third_party/kernel/v4.19/kernel/dma/debug.c:1301 debug_dma_map_sg+0x1dc/0x318 [ 12.102655] Modules linked in: joydev [ 12.106442] CPU: 6 PID: 334 Comm: frecon Not tainted 4.19.0 #2 [ 12.112450] Hardware name: Google Cheza (rev3+) (DT) [ 12.117566] pstate: 60400009 (nZCv daif +PAN -UAO) [ 12.122506] pc : debug_dma_map_sg+0x1dc/0x318 [ 12.126995] lr : debug_dma_map_sg+0x1dc/0x318 [ 12.131487] sp : ffffff800cc3ba80 [ 12.134913] x29: ffffff800cc3ba80 x28: 0000000000000000 [ 12.140395] x27: 0000000000000004 x26: 0000000000000004 [ 12.145868] x25: ffffff8008e55b18 x24: 0000000000000000 [ 12.151337] x23: 00000000ffffffff x22: ffffff800921c000 [ 12.156809] x21: ffffffc0fa75b080 x20: ffffffc0f7195090 [ 12.162280] x19: ffffffc0f1c53280 x18: 0000000000000000 [ 12.167749] x17: 0000000000000000 x16: 0000000000000000 [ 12.173218] x15: 0000000000000000 x14: 0720072007200720 [ 12.178689] x13: 0720072007200720 x12: 0720072007200720 [ 12.184161] x11: 0720072007200720 x10: 0720072007200720 [ 12.189641] x9 : ffffffc0f1fc6b60 x8 : 0000000000000000 [ 12.195110] x7 : ffffff8008132ce0 x6 : 0000000000000000 [ 12.200585] x5 : 0000000000000000 x4 : ffffff8008134734 [ 12.206058] x3 : ffffff800cc3b830 x2 : ffffffc0f1fc6240 [ 12.211532] x1 : 25045a74f48a7400 x0 : 25045a74f48a7400 [ 12.217006] Call trace: [ 12.219535] debug_dma_map_sg+0x1dc/0x318 [ 12.223671] get_pages+0x19c/0x20c [ 12.227177] msm_gem_fault+0x64/0xfc [ 12.230874] __do_fault+0x3c/0x140 [ 12.234383] __handle_mm_fault+0x70c/0xdb8 [ 12.238603] handle_mm_fault+0xac/0xc4 [ 12.242473] do_page_fault+0x1bc/0x3d4 [ 12.246342] do_translation_fault+0x54/0x88 [ 12.250652] do_mem_abort+0x60/0xf0 [ 12.254250] el0_da+0x20/0x24 [ 12.257317] irq event stamp: 67260 [ 12.260828] hardirqs last enabled at (67259): [<ffffff8008132d0c>] console_unlock+0x214/0x608 [ 12.269693] hardirqs last disabled at (67260): [<ffffff8008080e0c>] do_debug_exception+0x5c/0x178 [ 12.278820] softirqs last enabled at (67256): [<ffffff8008081664>] __do_softirq+0x4d4/0x520 [ 12.287510] softirqs last disabled at (67249): [<ffffff80080be574>] irq_exit+0xa8/0x100 [ 12.295742] ---[ end trace e63cfc40c313ffab ]--- The root of the problem is that the default segment size for sgt is (UINT_MAX & PAGE_MASK), and the default segment size for device dma is 64K. As such, if you compare the 2, you would deduce that the sg segment will overflow the device's capacity. In reality, the hardware can accommodate the larger sg segments, it's just not initializing its max segment properly. This patch initializes the max segment size for the mdss device, which gets rid of that pesky warning. Reported-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200121111813.REPOST.1.I92c66a35fb13f368095b05287bdabdbe88ca6922@changeid
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 14:03:22 +0000