summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/mdp
AgeCommit message (Collapse)Author
2016-07-16drm/msm/mdp5: Create a separate MDP5 deviceArchit Taneja
In order to have a tree-like device hierarchy between MDSS and its sub-blocks (MDP5, DSI, HDMI, eDP etc), we need to create a separate device/driver for MDP5. Currently, MDP5 and MDSS are squashed together are are tied to the top level platform_device, which is also the one used to create drm_device. The mdp5_kms_init code is split into two parts. The part where device resources are allocated are associated with the MDP5 driver's probe, the rest is executed later when we initialize modeset. With this change, unlike MDP4, the MDP5 platform_device isn't tied to the top level drm_device anymore. The top level drm_device is now associated with a platform device that corresponds to MDSS wrapper hardware. Create mdp5_init/destroy funcs that will be used by the MDP5 driver probe/remove. Use the HW_VERSION register in the MDP5 register address space. Both the MDSS and MDP VERSION registers give out identical version info. The older mdp5_kms_init code is left as is for now, this would be removed later when we have all the pieces to support the new device hierarchy. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-07-16drm/msm/mdp5: Add MDSS top level driverArchit Taneja
SoCs that contain MDP5 have a top level wrapper called MDSS that manages clocks, power and irq for the sub-blocks within it. Currently, the MDSS portions are stuffed into the MDP5 driver. This makes it hard to represent the DT bindings in the correct way. We create a top level MDSS helper that handles these parts. This is essentially moving out some of the mdp5_kms irq code and MDSS register space and keeping it as a separate entity. We haven't given any clocks to the top level MDSS yet, but a AHB clock would be added in the future to access registers. One thing to note is that the resources allocated by this helper are tied to the top level platform_device (the one that allocates the drm_device struct too). This device would be the parent to MDSS sub-blocks like MDP5, DSI, eDP etc. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-07-16drm/msm: Get irq number within kms driver itselfArchit Taneja
The driver gets the irq number using platform_get_irq on the main kms platform device. This works fine since both MDP4 and MDP5 currently have a flat device hierarchy. The platform device tied with the drm_device points to the MDP DT node in both cases. This won't work when MDP5 supports a tree-like hierarchy. In this case, the platform device tied to the top level drm_device is the MDSS DT node, and the irq we need for KMS is the one generated by MDP5, not MDSS. Get the irq number from the MDP4/5 kms driver itself. Each driver can later provide the irq number based on what device hierarchy it uses. While we're at it, call drm_irq_install only when we have a valid KMS driver. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-07-16drm/msm/mdp4: Clean up some MDP4 clocksArchit Taneja
Fix some issues with MDP4 clocks: - mdp4_dtv_encoder tries to get "src_clk", which is a RCG(TV_SRC) in MSM8960 and APQ8064. This isn't something the driver should access or configure. Instead of this, configure the "mdp_clk" (MDP_TV_CLK), a branch clock in MMCC that has the TV_SRC as its parent. Setting rate/enabling the "mdp_clk" will eventually configure "src_clk", which is what we want. - Rename "mdp_clk" to "tv_clk" because that's slightly less confusing. - Rename "mdp_axi_clk" to "bus_clk" because that's what we do elsewhere too. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-07-16drm/msm/mdp5: Don't get source of MDP core clockArchit Taneja
The driver expects DT to provide the parent to MDP core clock. The only operation done to the parent clock is to set a rate. This can be achieved by setting the rate on the core clock itsef. Don't try to get the parent clock anymore. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-06-09drm: msm: Rely on the default ->best_encoder() behavior where appropriateBoris Brezillon
For all outputs except DSI we have a 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-9-git-send-email-boris.brezillon@free-electrons.com
2016-06-02drm/atomic: Add drm_atomic_crtc_state_for_each_plane_stateDaniel Vetter
... and use it in msm&vc4. Again just want to encapsulate drm_atomic_state internals a bit. The const threading is a bit awkward in vc4 since C sucks, but I still think it's worth to enforce this. Eventually I want to make all the obj->state pointers const too, but that's a lot more work ... v2: Provide safe macro to wrap up the unsafe helper better, suggested by Maarten. v3: Fixup subject (Maarten) and spelling fixes (Eric Engestrom). Cc: Eric Anholt <eric@anholt.net> Cc: Rob Clark <robdclark@gmail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464877304-4213-1-git-send-email-daniel.vetter@ffwll.ch
2016-06-02drm/msm: Use for_each_*_in_stateDaniel Vetter
We want to hide drm_atomic_state internals v2: Review from Maarten: - remove whitespace change in rockchip driver that slipped in. - use drm_crtc_mask insted of open-coding it. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-4-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Remove unused drm_device from drm_gem_object_lookup()Chris Wilson
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fixup kerneldoc too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-05-08drm/msm: Centralize connector registration/unregistrationArchit Taneja
Move the drm_connector registration from the encoder(HDMI/DSI etc) drivers to the msm platform driver. This will simplify the task of ensuring that the connectors are registered only after the drm_device itself is registered. The connectors' destroy ops are made to use kzalloc instead of devm_kzalloc to ensure that that the connectors can be successfully unregistered when the msm driver module is removed. The memory for the connectors is unallocated when drm_mode_config_cleanup() is called during either during an error or during driver remove. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm/mdp4: Don't manage DSI PLL regulators in MDP driverArchit Taneja
The MDP4 driver tries to request and set voltages for regulators required by the DSI PLLs. Firstly, the MDP4 driver shouldn't manage the DSI regulators, this should be handled in the DSI driver. Secondly, it shouldn't try to set a fixed voltage for regulators. Voltage constraints should be specified on the regulator via DT and managed by the regulator core. Remove all the DSI PLL regulator related code from the MDP4 driver. It's managed in the DSI driver for MSM8960/APQ8064 already. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm/mdp: Add support for more RGBX formatsRob Herring
Android needs XBGR8888 format. Add all the missing 32-bpp formats without alpha for completeness. Cc: Archit Taneja <architt@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-02drm/msm: use drm_crtc_send_vblank_event()Gustavo Padovan
Replace the legacy drm_send_vblank_event() with the new helper function. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460656118-16766-5-git-send-email-gustavo@padovan.org
2016-03-16Merge tag 'topic/drm-misc-2016-03-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next * tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel: (27 commits) drm: atomic helper: do not unreference error pointer drm/edid: Extract SADs properly from multiple audio data blocks drm: fix blob pointer check drm: introduce pipe color correction properties drm/atomic: Clean up update_connector_routing. drm/atomic: Clean up steal_encoder, v2. drm/atomic: Handle encoder assignment conflicts in a separate check, v3. drm/atomic: Handle encoder stealing from set_config better. drm/atomic: Always call steal_encoder, v2. drm/ast: removed optional dummy crtc mode_fixup function. drm/bochs: removed optional dummy crtc mode_fixup function. drm/fsl-dcu: removed optional dummy crtc mode_fixup function. drm/virtio: removed optional dummy crtc mode_fixup function. drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function. drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function. drm/sti: removed optional dummy crtc mode_fixup function. drm/shmobile: removed optional dummy crtc mode_fixup function. drm/msm/mdp: removed optional dummy crtc mode_fixup function. drm/omapdrm: removed optional dummy crtc mode_fixup function. drm/rcar-du: removed optional dummy crtc mode_fixup function. ...
2016-03-04drm/msm/mdp: removed optional dummy crtc mode_fixup function.Carlos Palminha
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-03-03drm/msm: rename hdmi symbolsArnd Bergmann
Global symbols in the kernel should be prefixed by the name of the subsystem and/or driver to avoid conflicts when all code is built-in. In this case, function names like 'hdmi_register' or 'hdmi_set_mode' are way too generic for an MSM specific DRM driver, so I'm renaming them all to msm_hdmi_* here. I also rename a lot of the 'static' symbols along with the global names for consistency, even though those are relatively harmless; they might only be slightly confusing when they show up in backtraces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-03-03drm/msm: update generated headersRob Clark
Pull in additional regs needed for a430, etc. Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-03-02drm/msm/mdp: Detach iommu in mdp4_destroySricharan R
attach_dev gets called in mdp4_kms_init, but there is no corresponding detach_dev called in the error path or in the kms driver unload path. Detach and destroy mmu in mdp4_destroy. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-03-02drm/msm/mdp: Use atomic helper to set crtc propertyArchit Taneja
Assign drm_atomic_helper_crtc_set_property helper to MDP4 and MDP5 crtcs' set_property ops. This replaces the custom funcs that returned an error even for standard crtc properties. Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-02-16drm/msm/mdp: removed optional dummy encoder mode_fixup function.Carlos Palminha
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/77692d9d34c2ed6a035f36d377d3544dbe100114.1455540137.git.palminha@synopsys.com
2016-02-08drm/msm: Nuke preclose hooksDaniel Vetter
They only complete the page flip events to avoid oops when the drm file closes. The core takes care of that now and we can remove this code. Cc: Rob Clark <robdclark@gmail.com> Acked-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453756616-28942-8-git-send-email-daniel.vetter@ffwll.ch
2015-12-15Merge tag 'topic/drm-misc-2015-12-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Last (very likely at least) drm-misc pull for 4.5. 3 big things: - piles of docs for kms vtables. - drm.debug dmesg output prettification from Ville (i915 parts are for 4.6 I think) - connector mode probing/validating/merging cleanup from Ville. [airlied : fix drm_encoder_init conflict.] * tag 'topic/drm-misc-2015-12-14' of git://anongit.freedesktop.org/drm-intel: (43 commits) drm: modes: Revert cc344980c767 "replace simple_strtoul by kstrtouint" drm: Expand the drm_helper_probe_single_connector_modes() docs drm: Allow override_edid to override the firmware EDID drm/sti: Drop bogus drm_mode_sort() call drm: Drop drm_helper_probe_single_connector_modes_nomerge() drm: Only merge mode type bits between new probed modes drm: Flatten drm_mode_connector_list_update() a bit drm: Rename MODE_UNVERIFIED to MODE_STALE drm: Don't overwrite UNVERFIED mode status to OK drm: Add plane->name and use it in debug prints drm: Add crtc->name and use it in debug messages drm: Use driver specified encoder name drm: Pass 'name' to drm_encoder_init() drm: Pass 'name' to drm_universal_plane_init() drm: Pass 'name' to drm_crtc_init_with_planes() drm: Documentation style guide drm: Document drm_encoder/crtc_helper_funcs drm: Move drm_display_mode an related docs into kerneldoc drm/atomic-helper: Mention the new system/resume helpers the docs drm: Document drm_connector_helper_funcs ...
2015-12-14drm/msm/mdp: fix a problematic usage of WARN_ON()Geliang Tang
WARN_ON() takes a condition rather than a format string. This patch converted WARN_ON() to WARN() instead. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm: ratelimit error irq msgsRob Clark
When things go bad and don't recover, we can be getting an err irq every vblank. Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/mdp4: Initialize DSI encodersArchit Taneja
Create DSI encoders during modeset_init. The 2 encoders should ideally be one command mode and one video mode DSI encoder respectively, but we don't support command mode yet. We just create 2 of the same because the dsi driver expects it, we end up using only the first one. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/mdp4: Call custom round_pixclk helper only if the encoder type is TMDSArchit Taneja
The mdp_kms round_pixclk op creates problems when we have more interfaces in use. It calls the DTV encoder's helper by default. Check on encoder type and call the corresponding encoder's func meant for rounding pixel clock. DSI and LVDS don't require rounding, so just return rate in their case. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/dsi: Add a mdp4 encoder for DSIVinay Simha BN
Create an mdp4 incoder for DSI. Only DSI video mode is supported as of now. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Vinay Simha BN <vinaysimha@inforcecomputing.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/mdp4: Initialize LCDC encoder even if panel driver isn't availableArchit Taneja
Currently, the driver defers if it doesn't find a drm_panel. This forces us to have a drm_panel, if not, the driver isn't usable. Make the lcdc encoder initialization independent of the availability of the drm panel. We only check if there is a panel node specified in DT. If it isn't, then we don't initialize the encoder at all. The panel node is passed to the lcdc encoder and lvds connector drivers. The connector driver takes the responsibility to retrieve the drm_panel from the panel node, and update the status on whether the panel is connected or not. This makes the panel usable even if the drm_panel driver is inserted as a module later on. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/mdp4: Clean up modeset_initArchit Taneja
modeset_init() for mdp4 isn't very flexible. That makes it hard to add more interfaces. Split out the encoder/connector creation code in modeset_init into a separate function. This is similar to what's done in modeset_init for mdp5. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/mdp: Remove CONFIG_OF checks from MDP driversArchit Taneja
We don't intend to use downstream non-DT kernels anymore, so remove CONFIG_OF checks. Update the TODO comment so that we don't forget about max_clk setting for non APQ8064 chips having MDP4. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-14drm/msm/mdp5: high precision vblank timestamp supportArchit Taneja
MDP5 has line count and frame count registers for each interface. Enable these counters and use them to implement the get_vblank_timestamp drm driver op. The line counter starts with the value 1 at the beginning of the VSYNC pulse and ends with value VTOTAL at the end of VFP. This value is used to determine whether we're in blanking period or not, and an adjusted value of this counter is used to get vpos as expected by get_scanout_position. Since there is no way to calculate hpos, we always set it to 0. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-12-11drm: Pass 'name' to drm_encoder_init()Ville Syrjälä
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4; @@ drm_encoder_init(E1, E2, E3, E4 + ,NULL ) v2: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Pass 'name' to drm_universal_plane_init()Ville Syrjälä
Done with coccinelle for the most part. It choked on msm/mdp/mdp5/mdp5_plane.c like so: "BAD:!!!!! enum drm_plane_type type;" No idea how to deal with that, so I just fixed that up by hand. Also it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_plane_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ typedef uint32_t; identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, plane, possible_crtcs, funcs, formats, format_count, type; @@ int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, unsigned long possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, enum drm_plane_type type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5, E6, E7; @@ drm_universal_plane_init(E1, E2, E3, E4, E5, E6, E7 + ,NULL ) v2: Split crtc and plane changes apart Pass NUL for no-name instead of "" Leave drm_plane_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670795-2853-1-git-send-email-ville.syrjala@linux.intel.com
2015-12-11drm: Pass 'name' to drm_crtc_init_with_planes()Ville Syrjälä
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_crtc_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5; @@ drm_crtc_init_with_planes(E1, E2, E3, E4, E5 + ,NULL ) v2: Split crtc and plane changes apart Pass NULL for no-name instead of "" Leave drm_crtc_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670771-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-10-22drm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996)Stephane Viau
This change adds the basic MDP5 support for MSM8996. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-10-22drm/msm/mdp: Add Software Pixel Extension supportStephane Viau
In order to produce an image, the scalar needs to be fed extra pixels. These top/bottom/left/right values depend on a various of factors, including resolution, scaling type, phase step and initial phase. Pixel Extension are programmed by hardware in most targets - and can be overwritten by software. For some targets (e.g.: msm8996), software *must* program those registers. In order to ease this computation, let's always use bilinear filters, which are easier to program from kernel. Eventually, all of these values will come down from user space for better quality. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-10-22drm/msm/mdp5: Use the newly introduced enum mdp_component_typeStephane Viau
When calculating phase steps, let's use the same enum mdp_component_type in order to ease the readability; 0/1 indexes are a bit confusing and we now have explicit values to index this type of arrays. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-10-22drm/msm/mdp5: Avoid printing error messages for optional clocksStephane Viau
The current behavior is to try to get optional clocks and print a dev_err message in case of failure. This looks rather confusing and may increase with the amount of optional clocks. We may need a cleaner way to handle per-device clocks but in the meantime, let's reduce the amount of dev_err messages during the probe. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-10-22drm/msm: Fix IOMMU clean up path in case msm_iommu_new() failsStephane Viau
msm_iommu_new() can fail and this change makes sure that we detect the failure and free the allocated domain before going any further. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-10-22drm/msm/mdp5: remove the cfg pointer from SMP structStephane Viau
We want to make sure we control all the information being passed down to SMP block. Having access to the cfg pointer here may create bad things in the future. Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-10-22drm/msm: update generated headersRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-09-24Merge tag 'v4.3-rc2' into topic/drm-miscDaniel Vetter
Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code between bugfixes and new code. Just adjacent lines really. On top of that there's a silent conflict in the new fsl-dcu driver merged into 4.3 and commit 844f9111f6f54f88eb2f0fac121b82ce77193866 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Wed Sep 2 10:42:40 2015 +0200 drm/atomic: Make prepare_fb/cleanup_fb only take state, v3. which Thierry Reding spotted and provided a fixup for. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-09-16gpu/drm: Kill off set_irq_flags usageRob Herring
set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-08drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.Maarten Lankhorst
This removes the need to separately track fb changes i915. That will be done as a separate commit, however. Changes since v1: - Add dri-devel to cc. - Fix a check in intel's prepare and cleanup fb to take rotation into account. Changes since v2: - Split out i915 changes to a separate commit. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Stone <daniels@collabora.com> [danvet: Squash in msm fixup from Maarten.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-15drm/msm/mdp: Clear pending interrupt status before enable interruptjilai wang
Pending interrupt status needs to be cleared before enable the interrupt. Otherwise it's possible to get a pending interrupt instead of an incoming interrupt. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-08-15drm/msm/mdp5: Add rotation (hflip/vflip) support to MDP5 planes (v2)jilai wang
MDP5 SSPPs can flip the input source horizontally or vertically. This change is to add this support to MDP5 planes. v1: Initial change v2: Use existing "rotation" property instead of creating msm specific properties. In order to be compatiable with legacy non-atomic set_property, switch to drm_atomic_helper_plane_set_property helper function. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-08-15drm/msm: add calls to prepare and unprepare panelSrinivas Kandagatla
Prepare the panel before it's enabled and un-prepare after disable, this will make sure that the regulators are switched on and off correctly. Tested it on APQ8064 based IFC6410 with panel. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-08-15drm/msm: mdp4 lvds: get panel node via of graph parsingArchit Taneja
We currently get the output connected to LVDS by looking for a phandle called 'qcom,lvds-panel' under the mdp DT node. Use the more standard of_graph approach to create an lvds output port, and retrieve the panel node from the port's endpoint data. v3 - Fix return value checks of of_graph_* calls. Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-08-15drm/msm: Enable clocks during enable/disable_vblank() callbacksHai Li
AHB clock should be enabled before accessing registers during enable/disable_vblank(). Since these 2 callbacks are called in atomic context while clk_prepare may cause thread sleep, a work is scheduled to control vblanks. v2: fixup spinlock initialization Signed-off-by: Hai Li <hali@codeaurora.org> [add comment about cancel_work_sync() before drm_irq_uninstall()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-08-15drm/msm/mdp5: Add support for msm8x74v1jilai wang
msm8x74v1 has different MDP5 version (v1.0) from msm8x74v2 (v1.2). Add a separate config data to support msm8x74v1. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 11:46:10 +0000