summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/msm/hdmi
AgeCommit message (Collapse)Author
2023-03-21drm/msm: Update generated headersRob Clark
It's been a bit overdue. Regen headers to pull in a2xx perfcntr updates, etc. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/527926/ Link: https://lore.kernel.org/r/20230320185416.938842-2-robdclark@gmail.com
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-08firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/Elliot Berman
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
2023-02-03Merge tag 'drm-msm-next-2023-01-30' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next msm-next for v6.3 There is one devfreq patch, maintainer acked to land via msm-next to avoid a build break on platforms that do not support PM_DEVFREQ. And otherwise the usual assortment: GPU: - Add MSM_SUBMIT_BO_NO_IMPLICIT - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes DPU, DSI, MDSS: - Support for SM8350, SM8450 SM8550 and SC8280XP platform Core: - Added bindings for SM8150 (driver support already present) DPU: - Partial support for DSC on SM8150 and SM8250 - Fixed color transformation matrix being lost on suspend/resume - Include DSC blocks into register snapshot - Misc HW catalog fixes DP: - Support for DP on SDM845 and SC8280XP platforms - HPD fixes - Support for limiting DP link rate via DT property, this enables - Support for HBR3 rates. DSI: - Validate display modes according to the DSI OPP table - DSI PHY support for the SM6375 platform - Fixed byte intf clock selection for 14nm PHYs - Fix the case of empty OPP tables (fixing db410c) - DT schema rework and fixes HDMI: - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT MDP5: - Schema conversion to YAML Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv6zQ-zsgS+NG+WuV=tk51q9vA2QdKqYhNgiXQddAdZjA@mail.gmail.com
2023-01-31Merge v6.2-rc6 into drm-nextDaniel Vetter
Due to holidays we started -next with more -fixes in-flight than usual, and people have been asking where they are. Backmerge to get things better in sync. Conflicts: - Tiny conflict in drm_fbdev_generic.c between variable rename and missing error handling that got added. - Conflict in drm_fb_helper.c between the added call to vgaswitcheroo in drm_fb_helper_single_fb_probe and a refactor patch that extracted lots of helpers and incidentally removed the dev local variable. Readd it to make things compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-01-26drm/msm/hdmi: make hdmi_phy_8960 OF clk providerDmitry Baryshkov
On MSM8960 the HDMI PHY provides the PLL clock to the MMCC. As we are preparing to convert the MSM8960 to use DT clocks properties (rather than global clock names), register the OF clock provider. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/519211/ Link: https://lore.kernel.org/r/20230119132219.2479775-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-26drm/msm/hdmi: switch hdmi_pll_8960 to use parent_dataDmitry Baryshkov
Replace parent_names usage with parent_data. Note, that this makes the PLL default to board's `pxo_board' clock rather than just `pxo' clock, as we are on a way to deprecate the global cxo/pxo clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/519210/ Link: https://lore.kernel.org/r/20230119132219.2479775-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-16Merge tag 'drm-misc-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * fourcc: Document Open Source user waiver Cross-subsystem Changes: * firmware: fix color-format selection for system framebuffers Core Changes: * format-helper: Add conversion from XRGB8888 to various sysfb formats; Make XRGB8888 the only driver-emulated legacy format * fb-helper: Avoid blank consoles from selecting an incorrect color format * probe-helper: Enable/disable HPD on connectors plus driver updates * Use drm_dbg_ helpers in several places * docs: Document defaults for CRTC backgrounds; Document use of drm_minor Driver Changes: * arm/hdlcd: Use new debugfs helpers * gud: Use new debugfs helpers * panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert many drivers to common generic DSI write-sequence helper * v3d: Do not opencode drm_gem_object_lookup() * vc4: Various HVS an CRTC fixes * vkms: Fix SEGFAULT from incorrect GEM-buffer mapping * Convert various drivers to i2c probe_new() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
2023-01-09drm/msm/hdmi: Add missing check for alloc_ordered_workqueueJiasheng Jiang
Add check for the return value of alloc_ordered_workqueue as it may return NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and `hdmi_hpd.c`. Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/517211/ Link: https://lore.kernel.org/r/20230106023011.3985-1-jiasheng@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-05drm/msm/hdmi: stop using drm_bridge_connector_en/disable_hpd()Dmitry Baryshkov
The functionality of drm_bridge_connector_enable_hpd() and drm_bridge_connector_disable_hpd() is provided automatically by the drm_kms_poll helpers. Stop calling these functions manually. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-6-dmitry.baryshkov@linaro.org
2022-12-27drm/msm/hdmi: Fix the error handling path of msm_hdmi_dev_probe()Christophe JAILLET
If an error occurs after a successful msm_hdmi_get_phy() call, it must be undone by a corresponding msm_hdmi_put_phy(), as already done in the remove function. Fixes: 437365464043 ("drm/msm/hdmi: move msm_hdmi_get_phy() to msm_hdmi_dev_probe()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514847/ Link: https://lore.kernel.org/r/b3f9da097851e2e42a40dc61458aa98c41c88d0d.1670741386.git.christophe.jaillet@wanadoo.fr Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-11-23drm/msm/hdmi: remove unnecessary NULL checkDan Carpenter
This code was recently refactored in commit and now the "hdmi" pointer can't be NULL. Checking for NULL leads to a Smatch warning: drivers/gpu/drm/msm/hdmi/hdmi.c:141 msm_hdmi_init() warn: variable dereferenced before check 'hdmi' (see line 119) Fixes: 69a88d8633ec ("drm/msm/hdmi: move resource allocation to probe function") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/512163/ Link: https://lore.kernel.org/r/Y3eCqQ2pm1uQnktV@kadam Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/hdmi: move msm_hdmi_get_phy() to msm_hdmi_dev_probe()Dmitry Baryshkov
To continue the idea of failing the probe() rather than failing the bind(), move the call to msm_hdmi_get_phy() function to msm_hdmi_dev_probe(), so that the driver fails the probe if PHY is not yet available rather than succeeding the probe and then failing the bind() with -EPROBE_DEFER. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499652/ Link: https://lore.kernel.org/r/20220826093927.851597-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/hdmi: don't take extra reference on PHY deviceDmitry Baryshkov
The of_find_device_by_node() already increments the device's usage count, so there is no need to increment it again using get_device(). Drop this extra get_device(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499648/ Link: https://lore.kernel.org/r/20220826093927.851597-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-04drm/msm/hdmi: move resource allocation to probe functionDmitry Baryshkov
Rather than having all resource allocation happen in the _bind function (resulting in possible EPROBE_DEFER returns and component bind/unbind cycles) allocate and check all resources in _probe function. While we are at it, use platform_get_irq() to get the IRQ rather than going through the irq_of_parse_and_map(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499649/ Link: https://lore.kernel.org/r/20220826093927.851597-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-03drm/msm/hdmi: drop constant resource names from platform configDmitry Baryshkov
All MSM HDMI devices use "core_physical" and "qfprom_physical" names for register areas. Drop them from the platform config. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499646/ Link: https://lore.kernel.org/r/20220826093927.851597-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-11-03drm/msm/hdmi: use devres helper for runtime PM managementDmitry Baryshkov
Use devm_pm_runtime_enable() to enable runtime PM. This way its effect will be reverted on device unbind/destruction. Fixes: 6ed9ed484d04 ("drm/msm/hdmi: Set up runtime PM for HDMI") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/499647/ Link: https://lore.kernel.org/r/20220826093927.851597-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-09-30drm/msm/hdmi: fix IRQ lifetimeJohan Hovold
Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This is specifically true for the HDMI IRQ, which will otherwise remain requested so that the next bind attempt fails when requesting the IRQ a second time. Fix this by tying the device-managed lifetime of the HDMI IRQ to the DRM device so that it is released when bind fails. Fixes: 067fef372c73 ("drm/msm/hdmi: refactor bind/init") Cc: stable@vger.kernel.org # 3.19 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502666/ Link: https://lore.kernel.org/r/20220913085320.8577-9-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-09-30drm/msm/hdmi: fix memory corruption with too many bridgesJohan Hovold
Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Fixes: a3376e3ec81c ("drm/msm: convert to drm_bridge") Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/502670/ Link: https://lore.kernel.org/r/20220913085320.8577-5-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2022-09-18drm/msm/hdmi: make hdmi_phy_8996 OF clk providerDmitry Baryshkov
On MSM8996 the HDMI PHY provides the PLL clock to the MMCC. As we are preparing to convert the MSM8996 to use DT clocks properties (rather than global clock names), register the OF clock provider. While we are at it, also change the driver to use clk_parent_data rather parent_names to setup a link to the XO clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/492318/ Link: https://lore.kernel.org/r/20220704161148.814510-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-13Merge tag 'drm-msm-next-2022-07-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next Next for v5.20 GPU: - a619 support - Fix for unclocked GMU register access - Devcore dump enhancements Core: - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings DPU: - constification of HW catalog - support for using encoder as CRC source - WB support on sc7180 - WB resolution fixes DP: - dropped custom bulk clock implementation - made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable - fix link retraining on resolution change MDP5: - MSM8953 perf data HDMI: - YAML'ification of schema - dropped obsolete GPIO support - misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtuqswBGPw-kCYzJvckK2RR1XTeUEgaXwVG_mvpbv3gPA@mail.gmail.com
2022-07-04drm/msm/hdmi: support attaching the "next" bridgeDmitry Baryshkov
There might be a chain of bridges attached to the HDMI node (including but not limited to the display-connector bridge). Add support for attaching them right to the HDMI bridge chain. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489709/ Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop empty bridge callbacksDmitry Baryshkov
Drop empty callbacks msm_hdmi_bridge_enable() and msm_hdmi_bridge_disable(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489707/ Link: https://lore.kernel.org/r/20220616085054.432317-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirementsDmitry Baryshkov
Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface clock (this is the same config as is used by the 8960). Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488863/ Link: https://lore.kernel.org/r/20220609122350.3157529-13-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: reuse MSM8960's config for MSM8660Dmitry Baryshkov
MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse MSM8960's config for the MSM8660 (8x60). Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488864/ Link: https://lore.kernel.org/r/20220609122350.3157529-12-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: merge platform config for 8974/8084/8994/8996Dmitry Baryshkov
Since there is no more difference between the HDMI platform data between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a single entry. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488868/ Link: https://lore.kernel.org/r/20220609122350.3157529-11-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop hpd_regs usage on 8x74/8084Dmitry Baryshkov
The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply regulators that are to be enabled for HPD to work. Currently these regulators contain the hpd_gdsc, which was replaced by the power-domains support and hpd-5v/hpd-5v-en, which are not used by the chip itself. They power up the ESD bridge. However it is a separate device which should be represented separately in the device tree. None of upstreamed devices support these properties. Thus drop support for them from the HDMI driver. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488860/ Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop empty 'none' regulator listsDmitry Baryshkov
Several platform configs use empty 'none' regulator arrays. They are not necessary, as the code will use corresponding _cnt field and skip the array completely. Drop them now. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488861/ Link: https://lore.kernel.org/r/20220609122350.3157529-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platformDmitry Baryshkov
DB820c makes use of core-vcc-supply and core-vdda-supply, however the driver code doesn't support these regulators. Enable them for HDMI on 8996 platform. Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488857/ Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop unused GPIO supportDmitry Baryshkov
The HDMI driver has code to configure extra GPIOs, which predates pinctrl support. Nowadays all platforms should use pinctrl instead. Neither of upstreamed Qualcomm platforms uses these properties, so it's safe to drop them. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488858/ Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: drop the hdmi-mux supportDmitry Baryshkov
With the last (and only) in-kernel user of hdmi-mux regulator, drop it from the HDMI driver. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/488855/ Link: https://lore.kernel.org/r/20220609122350.3157529-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-07-04drm/msm/hdmi: fill the pwr_regs bulk regulatorsDmitry Baryshkov
Conversion to use bulk regulator API omitted filling the pwr_regs with proper regulator IDs. This was left unnoticed, since none of my testing platforms has used the pwr_regs. Fix this by propagating regulator ids properly. Fixes: 31b3b1f5e352 ("drm/msm/hdmi: use bulk regulator API") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/488847/ Link: https://lore.kernel.org/r/20220609113148.3149194-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-06-20drm: Drop drm_edid.h from drm_crtc.hVille Syrjälä
drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-05-02drm/msm/hdmi: fix error check return value of irq_of_parse_and_map()Lv Ruyi
The irq_of_parse_and_map() function returns 0 on failure, and does not return a negative value anyhow, so never enter this conditional branch. Fixes: f6a8eaca0ea1 ("drm/msm/mdp5: use irqdomains") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/483294/ Link: https://lore.kernel.org/r/20220425091831.3500487-1-lv.ruyi@zte.com.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/hdmi: check return value after calling platform_get_resource_byname()Yang Yingliang
It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value. Fixes: c6a57a50ad56 ("drm/msm/hdmi: add hdmi hdcp support (V3)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/482992/ Link: https://lore.kernel.org/r/20220422032227.2991553-1-yangyingliang@huawei.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: don't store created planes, connectors and encodersDmitry Baryshkov
There is no point now in storing arrays of creates planes, connectors and encoders. Remove them from struct msm_drm_private. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/480945/ Link: https://lore.kernel.org/r/20220406101247.483649-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-04-26drm/msm: properly add and remove internal bridgesDmitry Baryshkov
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by the driver. This fixes the following warning. WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4 DEBUG_LOCKS_WARN_ON(lock->magic != lock) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55 Hardware name: Generic DT based system unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xc8/0x1e8 __warn from warn_slowpath_fmt+0x78/0xa8 warn_slowpath_fmt from __mutex_lock+0x840/0x9f4 __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84 drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c mdp4_kms_init from msm_drm_bind+0x514/0x698 msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8 component_master_add_with_match from msm_pdev_probe+0x274/0x350 msm_pdev_probe from platform_probe+0x5c/0xbc platform_probe from really_probe.part.0+0x9c/0x290 really_probe.part.0 from __driver_probe_device+0xa8/0x13c __driver_probe_device from driver_probe_device+0x34/0x10c driver_probe_device from __driver_attach+0xbc/0x178 __driver_attach from bus_for_each_dev+0x74/0xc0 bus_for_each_dev from bus_add_driver+0x160/0x1e4 bus_add_driver from driver_register+0x88/0x118 driver_register from do_one_initcall+0x6c/0x334 do_one_initcall from kernel_init_freeable+0x1bc/0x220 kernel_init_freeable from kernel_init+0x18/0x12c kernel_init from ret_from_fork+0x14/0x2c Fixes: 3d3f8b1f8b62 ("drm/bridge: make bridge registration independent of drm flow") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/481778/ Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-03-04drm/msm: Update generated headersRob Clark
Update headers from mesa commit: commit 7e63fa2bb13cf14b765ad06d046789ee1879b5ef Author: Rob Clark <robclark@freedesktop.org> AuthorDate: Wed Mar 2 17:11:10 2022 -0800 freedreno/registers: Add a couple regs we need for kernel Signed-off-by: Rob Clark <robdclark@chromium.org> Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15221> Signed-off-by: Rob Clark <robdclark@chromium.org> [for display bits:] Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220304005317.776110-2-robdclark@gmail.com
2022-02-19Merge branches 'msm-next-lumag-core', 'msm-next-lumag-dpu', ↵Dmitry Baryshkov
'msm-next-lumag-dp', 'msm-next-lumag-dsi', 'msm-next-lumag-hdmi' and 'msm-next-lumag-mdp5' into msm-next-lumag
2022-02-18drm/msm/hdmi: Remove spurious IRQF_ONESHOT flagDaniel Thompson
Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts which need to keep the irq line disabled until the threaded handler has been run.". When applied to an interrupt that doesn't request a threaded irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect, which it to disable the forced threading of irqs. For "normal" kernels if there is no thread_fn then IRQF_ONESHOT is a nop. In this case disabling forced threading is not appropriate because the driver calls wake_up_all() (via msm_hdmi_i2c_irq) and also directly uses the regular spinlock API for locking (in msm_hdmi_hdcp_irq() ). Neither of these APIs can be called from no-thread interrupt handlers on PREEMPT_RT systems. Fix this by removing IRQF_ONESHOT. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220201174734.196718-3-daniel.thompson@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm: reduce usage of round_pixclk callbackDmitry Baryshkov
The round_pixclk() callback returns different rate only on MDP4 in HDMI (DTV) case. Stop using this callback in other cases to simplify mode_valid callbacks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20220106070656.482882-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-18drm/msm: drop dbgname argument from msm_ioremap*()Dmitry Baryshkov
msm_ioremap() functions take additional argument dbgname which is now unused. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20220105232700.444170-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-01-25drm/msm/hdmi: Fix missing put_device() call in msm_hdmi_get_phyMiaoqian Lin
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: e00012b256d4 ("drm/msm/hdmi: Make HDMI core get its PHY") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220107085026.23831-1-linmq006@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2021-12-16drm/msm: Don't use autosuspend for displayRob Clark
No functional change, as we only actually enable autosuspend for the GPU device. But lets not encourage thinking that autosuspend is a good idea for anything display related. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211215175910.1744151-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-12-07drm/msm/hdmi: switch to drm_bridge_connectorDmitry Baryshkov
Merge old hdmi_bridge and hdmi_connector implementations. Use drm_bridge_connector instead. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/20211015001100.4193241-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-12-06drm/msm: Allocate msm_drm_private early and pass it as driver dataAngeloGioacchino Del Regno
In preparation for registering the mdss interrupt controller earlier, move the allocation of msm_drm_private from component bind time to msm_drv probe; this also allows us to use the devm variant of kzalloc. Since it is not right to allocate the drm_device at probe time (as it should exist only when all components are bound, and taken down when components get cleaned up), the only way to make this happen is to pass a pointer to msm_drm_private as driver data (like done in many other DRM drivers), instead of one to drm_device like it's currently done in this driver. This is also simplifying some bind/unbind functions around drm/msm, as some of them are using drm_device just to grab a pointer to the msm_drm_private structure, which we now retrieve in one call. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211201105210.24970-2-angelogioacchino.delregno@collabora.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-21drm/msm/hdmi: use bulk regulator APIDmitry Baryshkov
Switch to using bulk regulator API instead of hand coding loops. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211015001100.4193241-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jyri Sarha <jyri.sarha@iki.fi> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15drm: msm: hdmi: Constify static structsRikard Falkeborn
The only usage of hdmi_8996_pll_ops is to assign its address to the ops field in the clk_init_data struct, and the only usage of pll_init is to assign its address to the init field in the clk_hw struct, both which are pointers to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210920212014.40520-1-rikard.falkeborn@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: Generated register updateRob Clark
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5 Small bit of .c churn in the phy code to adapt to split up of phy related registers. Signed-off-by: Rob Clark <robdclark@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 09:59:38 +0000